Messaging Web access (http)

Previous version iPlanet messaging 5.2, inside admin web has the deligated admin for/to create user id and mailbox. But now, I using SUN JES Messaging 6.0 and I cannot find the deligated admin installed or configure. How to created user via admin web rather than command line or directory server.

Try posting this question to the messaging forum:
http://swforum.sun.com/jive/forum.jspa?forumID=15
Thanks
Manish

Similar Messages

Not able to enable web access (http server) on 5500

Hi
i have 5500 Swtich iam not able to enable http server in it
the message show below
Core-Switch> (enable) show ip http
HTTP Information
HTTP server: disabled
HTTP port: 800
Web Interface: Not supported
HTTP active sessions: 0
Core-Switch> (enable) show ver
WS-C5500 Software, Version McpSW: 5.5(18) NmpSW: 5.5(18)
Copyright (c) 1995-2002 by Cisco Systems
NMP S/W compiled on Dec 16 2002, 15:34:48
MCP S/W compiled on Dec 16 2002, 15:30:03
System Bootstrap Version: 3.1.2
Hardware Version: 1.4 Model: WS-C5500 Serial #: 069062010
Mod Port Model Serial # Versions
1 2 WS-X5530 008731527 Hw : 1.8
Fw : 3.1.2
Fw1: 4.1(1)
Sw : 5.5(18)
WS-F5520 008715296 Hw : 1.1
WS-U5533 009612560 Hw : 1.0
2 2 WS-X5530 008146970 Hw : 1.5
Fw : 3.1.2
Fw1: 3.1(2)
Sw : 5.5(18)
WS-F5520 007590229 Hw : 1.0
WS-U5533 009613415 Hw : 1.0
3 24 WS-X5234 022374107 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
4 24 WS-X5234 018022744 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
5 24 WS-X5234 018025296 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
6 24 WS-X5234 017582607 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
7 24 WS-X5234 017919621 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
10 1 WS-X5304 024975347 Hw : 7.7
Fw : 20.22
Fw1: 3.1(1)
Sw : 12.1(20)

have you run the 'set ip http server enable' command at the CatOS CLI of the 5500?
as you've shown above, it is currently disabled
does the switch have an ip address assigned to interface SC0? does SC0 belong to an inactive VLAN?
if the switch OS does not support it, it should display an error as follows when you type in the command: (as shown below)
console> set ip http server enable
Feature not supported on the system.

Gateway web access configuration

We have an RD Gateway server hosted at our Central Office. We have 6 other sites that have RD host servers. I’ve been on the gateway and been on the Remote desktop web access configuration and seen that there is a list of programs from each site showing.
I’ve added a new program to one of the site but I can’t find if there is a way to replicate the changes or how to add the new program into the Web access on the gateway server? I’ve been looking into this but I can’t find any tutorials or support media on
it.
All servers are running server 2008 R2
If anyone can either point me in the right direction or let me know if there is a default replication time I’ll be great full. If this is in the wrong thread, please move this or let me know where to move it to.
Thank you.

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that you want to publish RD Web with RemoteApp on it. If misunderstand then please correct. If yes then you can follow the below link for information.
Remote Desktop Web Access (RD Web Access)
http://technet.microsoft.com/en-us/library/cc731923.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

VLAN on RVS4000 disables access to Remote Web Workplace, Outlook Web Access

I have an RVS4000 setup with a VLAN to a wireless "guest" network, guest network is 192.168.1.x, internal network is 10.0.0.x both have Internet access, and cannot see each other, exactly what I wanted. The only problem is that either from the internal network or the guest network I can no longer access the Remote Web Workplace - https://mail.mydomain.com/remote or Outlook Web Access https://mail.mydomain.com/exchange fails with page not found. Internally I can access via \\server\remote and \\server\exchange but of course this does not work for the guest network. We have Small Business Server 2003. External access if fine. I'm assuming this is some kind of routing issue but not sure how to fix. Thanks.

These forums are dedicated to Residential products and services offered by Verizon.
For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
Thank you
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

Can I setup a rule to auto forward or move messages in Microsoft Outlook Web Access for Firefox?

I am using Firefox 5.0 and Microsoft Office Outlook Web Access for email.
Is it possible to setup a rule to automatically move messages to a different folder, or to forward message to a different folder?
Thanks!

i haven't done it myself, i just pointed you to the article. Try it. If it does not work, you can Restore the Default settings. Save several Screenshots of the Default Settings to your Desktop to help you in case you want to Revert to the Default Settings.
Adding Screenshots - '''Creating the Screenshots''' (see this part to help you with Saving Screenshots
https://support.mozilla.com/en-US/kb/Adding%20screenshots
Check and tell if its working.

Cannot view OWA email - after upgrade to Firefox 5.0, Outlook Web Access displays ASCII characters (garbage) in message body. Same issue with multiple servers.

Email body of HTML or RTF messages are rendered in ASCII characters after upgrading to Firefox 5 when viewing email in MS Outlook Web Access (OWA) light from MS Exchange 2007 servers. Issue is repeatable with two entirely different Exchange systems.
Text email renders OK. Work around is to forward email (in use MS-IE).

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

How To Access HTTPS Web Service in Application Module

I need to know how to access HTTPS web service in application module.
If you can provide the tutorial or guidance to achieve this really appreciate.
Thanks
Sameera

Use the Web Service Proxy wizard in JDeveloper to create a class that calls your Web service, and then call this class from code in your AM.
http://docs.oracle.com/cd/E16340_01/web.1111/b31974/web_services.htm#CJAHGIEF

How to access HTTP Header from within Web service?

Hello,
Is there a way to access HTTP header variables like CONTENT_TYPE, CONTENT_LENGTH from within Web Logic web service.
I was able to get the HTTP header variable from within Apache AXIS services by calling context.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST
How can i do this from weblogic web service.
I need this to verify the client SSL_CLIENT_DN
In access I can get the header as follows.
HttpServletRequest req = (HttpServletRequest) context
.getProperty(HTTPConstants.MC_HTTP_SERVLETREQUEST);
clientID = req.getHeader("SSL_CLIENT_S_DN_Email");
Thanks
--Arun

hi
the following link may helpful to you
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html#1111537
Regards
Prasanna Yalam

Trying to access https web service

Hello: I'm on 4.1.1. I created web service referece for wsdl for http and it worked fine (http://www.webservicex.net/CurrencyConvertor.asmx?wsdl). Now I'm trying to connect to wsdl using https (https://stage.e-verify.uscis.gov/WebService/EmployerWebServiceV23.asmx?wsdl). I went into owm (oracle wallet manager) to create a wallet. I have pointed the apex instance to that wallet. I have completed the wizard to create a report and form on a web service but it is not working.
I hit the test connection, but get no response. I used to get an ACL/Wallet error before setting up the wallet and pointing to it. After setting up the wallet I no longer get that error, but no response either. I then did the Import Trusted Certificate in owm to pull in a PKCS #7 file I grabbed from the https website. But I still get no response. I can try importing the BASE64 certificate, but don't expect it to help.
One thing I notice is that the Username and Password entered when testing the web service reference does not appear in the request. I expect to get a response even if the Username and Password are wrong, but I don't, and they are not even in the request that I can see.
Are there any examples for setting up an https connection using wsdl with apex and wallet?
Thanks, Hawk
Edited by: Hawk on May 1, 2012 2:29 PM

At first I couldn't believe it would require going to the trouble of installing certificates just to access https web services. A Google search about APEX and SSL web services seemed to confirm it, but apparently that was all just a red herring.
There's one other thing I should mention in case it helps. APEX support for WSDL, even on 4.1, is still a little rudimentary. I've had problems with it on a few .NET generated web services in the past. Machine generated WSDL based on insanely whacky objects built by OOPtards is just too complex for the APEX WSDL interpreter. I'm just imaging the APEX WSDL component being hand forged in a musty corner of a cube farm somewhere and this large sweaty hammer wielding PL/SQL code cutter with his furnace and anvil beating out something to do the job.
If you're feeling brave, reach for your biggest code hammer. There's one more painful option that will certainly do the job. Process the WSDL locally on your desktop and generate your own SOAP envelopes based on that (SoapUI is a good tool for this). Then create a custom pl/sql package to send your web service request along with the envelope substituting any parameters you might need as the request and do what you need with the response. Just beware, here be a dragon convention.

Error message when login to Remote Web Access

Hi everyone,
I have a server that is running Windows Server 2012 Essential. All was working fine until one day I tried to login to Remote Web Access. As soon as I type in my user name and password and press enter I am greeted with the following error message:
"Critical Error - Remote Web Access" (this is displayed in the browser's web page bar)
"Cannot connect to Remote Web Access. Please contact the person who manages the server."
I don't know how to fix this problem. I only get this error page when entering the correct login.
I will be very grateful if anyone knows hot to get around this.
Thanks!

Hi John:
Before we get too worried, try "other user" then domain-name\user-name and pw.
Try that and let us know.
Also, and becuse you should do it anyway, run the BPA and fix everthing it finds, look through the event viewer for error messages, and run the BPA from right side under the devices tab.
Larry Struckmeyer[SBS-MVP]

Is it possible to clean up the http-web-access.log?

The size of the file http-web-access.log has increase drastically and I've just started facing disk full problems on my Server. We have are using Oracle 10g. I was wondering if someone could give me any advice how I can cleanup this file.
Thank you in adavnce.
Edited by: user8378419 on Apr 24, 2009 10:01 AM

Thank you for your reply. According to the defrag report it is an Oracle product - likely the OEM as we do use Enterprise Manager on a daily basis.
Fragments File Size Most fragmented files
3,630 600 MB \oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_wyocama01_ATSRV\log\http-web-access.log
Thanks again for any guidance regarding this.

When using Firefox to access my Lotus Notes webmail account, I cannot attach files. The following error message appears: Domino Web Access Warning. What settings do I need to change or how do I fix this?

When I try to send an attachment in my Lotus Notes webmail, a Domino Web Access Warning appears. What setting do I need to change or how do I fix this? I just switched from Internet Explorer to Firefox 2 days ago. Thanks
== This happened ==
Every time Firefox opened
== When I switched from Internet Explorer to Firefox

Idem for me

Whenever I try open my mail in Lotus Domino web Access I get an error message

'''Domino Web Access Warning. Sorry, we were unable to process your request at this time. If you are unable to continue working in your mail file, please dismiss this warning and then select View, Reload from your browser's menu. ''' Even when I reload the page I get the same error. I need a solution to this pleaseI currently upgraded to Firefox 8.0

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Messaging Web access (http)

Similar Messages

Maybe you are looking for