Method : RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP

Hi
we have just done an EHP5 upgrade on ERP but we seem to getting an error on PPM that reads as below, if anyone had once experienced this please assist as to how your fixed it.
Error while processing your query
What has happened?
The URL call http://iprsap017.za.corp.implats.co.za:8000/sap/bc/webdynpro/rpm/ui_dashboard_item was terminated because of an error.
Note
The following error occurred in system RQ1 : An exception occurred that was not caught.
The error occurred on application server IPRSAP017_RQ1_00 and in work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system RQ1 in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server IPRSAP017_RQ1_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 1 in transaction ST11 on the application server. IPRSAP017_RQ1_00 . You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 400 -u: DUMAN -l: E -s: RQ1 -i: IPRSAP017_RQ1_00 -w: 1 -d: 20120208 -t: 132101 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: 00221990F27D1ED194C8DF3CAF63BF97_00221990F27D1ED194C8DF4422C1BF97_1 -x: F94652E17BE5F1239F9700221990F27D
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello,
did you get this fixed? We are experiencing the same issue after just doing the EhP5 upgrade in our first system.
Thanks,
Ingrid Funken

Similar Messages

Getting Dump error for WD ABAP URL, program CX_WDR_ADAPTER_EXCEPTION======C

Hi SAP WD gurus,
Getting the below bump error while launcing the WD ABAP URL on browser.
Please help to resolve this.
The following error text was processed in system SD1 : An exception occurred that was not caught.
The error occurred on the application server isvsapsrmidev_SD1_01 and in the work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Regards,
Vinod
Edited by: Vinod Malagi on Jan 9, 2012 7:11 AM

Hello,
did you get this fixed? We are experiencing the same issue after just doing the EhP5 upgrade in our first system.
Thanks,
Ingrid Funken

How to add a code TestIfElse(10) to the Main method of the Program.cs class?

How to add a code TestIfElse(10) to the Main method of the Program.cs class?
Here is my code and I have copied from the Wiley book for Microsoft certification page 14,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace ifelse_Statement
class Program
static void Main(string[] args);
TestIfElse(10);
public static void TestIfElse(int n);
if(n < 10)
Console.WriteLine("n is less than 10");
else if(n < 20)
Console.WriteLine("n is less than 20");
else if(n < 30)
Console. WriteLine("n is greater than or equal to 30");
Here is the error list I am getting,
Error 1 Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 13
switch_Statement
Error 2
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\switch_Statement\Program.cs
12 24
switch_Statement
Error 3
Method must have a return type C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 9
ifelse_Statement
Error 4
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
12 20
ifelse_Statement
Error 5
Invalid token 'if' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 9
ifelse_Statement
Error 6
Invalid token '10' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 7
Type expected C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
16 16
ifelse_Statement
Error 8
Invalid token '(' in class, struct, or interface member declaration
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
18 35
ifelse_Statement
Error 9
A namespace cannot directly contain members such as fields or methods
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
20 10
ifelse_Statement
Error 10
Type or namespace definition, or end-of-file expected
C:\Users\PVS\documents\visual studio 2013\Projects\Lesson01\ifelse_Statement\Program.cs
30 1
ifelse_Statement
Error 11
The type or namespace name 'n' could not be found (are you missing a using directive or an assembly reference?)
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
16 12
ifelse_Statement
Error 12
'System.Console.WriteLine(string, params object[])' is a 'method' but is used like a 'type'
c:\users\pvs\documents\visual studio 2013\projects\lesson01\ifelse_statement\program.cs
18 26
ifelse_Statement

static void Main(string[] args){
TestIfElse(10);
public static void TestIfElse(int n)
if (n < 10)
Console.WriteLine("n is less than 10");
else if (n < 20)
Console.WriteLine("n is less than 20");
else if (n < 30)
Console.WriteLine("n is greater than or equal to 30");
Fouad Roumieh

How to call a Method in a Program?

Hello,
I am very new to the ABAP world. I have been given a task to call a method if_hrbas_plain_infotype_access~read_single from the class CL_HRBAS_PLAIN_INFOTYPE_ACCESS in a program to see if we can use it to display some employee information. I don't know how to call a method in a program. Can somebody please provide me some pseudo code or instructions?
Thanks.

Hi Shan,
here is the code to call a method. while calling the method Instance as 'r_info' which is the type reference to class as specified.
pass the values to exporting parameters plvar,otype,objid...etc according to the requirement
infotypes: 0002.   " creates an internal table p0002.
data:
r_info type ref to CL_HRBAS_PLAIN_INFOTYPE_ACCESS.
TRY.
CALL METHOD r_info->if_hrbas_plain_infotype_access~read
   EXPORTING
     plvar           =
     otype           =
     objid           =
     istat           =
     infty           =
*     SUBTY           =
     begda           =
     endda           =
     no_auth_check   = 'X'
     message_handler =
   IMPORTING
     PNNNN_TAB       = P0002
*     HRTNNNN_TAB     =
*     IS_OK           =
CATCH CX_HRBAS_VIOLATED_ASSERTION .
ENDTRY.
LOOP AT P0002.
      WRITE:/
        P0002-VORNA,
        P0002-NCHMC,
        P0002-NACHN.
    ENDLOOP.
Regards

HT1918 I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me. There's a billing problem with a previous purchase. Please update your payment method. The program will not let me u

I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me.
There's a billing problem with a previous purchase. Please update your payment method.
The program will not let me update, what am I doing wrong. rose165

I would love to have a phone number to call someone with apple on this issue.

How to call a standard BOR method in a program.

Hi All,
How to call a standard BOR method in a program. For example I have to call BOR method ISUSMORDER.Release in my program but don't know how to call.
Also, plz tell me how to capture the Exceptions in case of BOR method.
Plz help me out in this.
Thanks,
Mithilesh

Would be easier (however not always possible), to determine the functionality of this method and call that in your program. I mean, normally this method calls a BAPI, or function module (or a transaction). Have a look at the coding inside of the method, and try and use this.

Accessing the Par file or java methods in ABAP programming at ECC from EP

Hi experts,
Can we access par file or java methods in ABAP programming (ECC side)which are at Enterprise portal side .If it is possible please
let me know the procedure.Thanks for your help.
Thanks and Regards,
Venkat

Hi Das,
The mentioned wiki is for uploading the par file ,but my question is diffrent.This file or java method need to be used in ABAP side.
Thanks and Regards,
venkat

How to debug the method in abap program

How to debug the method in abap program ?
Could you please give the solution.
Thanks
sai

Hi ,
Place break point at call method .
It takes u in to the method implementation .
Here u can analyse the method implementation ...
Reward if useful
Thanks
Jagadeesh.G

Cannot activate ibus input method in QT programs

Hi everyone. I just installed arch linux and KDE but I found I could not activate ibus input method for QT programs. I have ibus, ibut-qt installed. I have the following in my ~/.profile
export GTK_IM_MODULE=ibus
export XMODIFIERS="@im=ibus"
export QT_IM_MODULE=ibus
ibus-daemon -x -d
But I have no luck, the ibus is working well for all the gtk programs, but not any qt programs.....Can anyone please help me ? thanks

~/.xprofile isnt it?

Can we use Call transaction and session method in same program ?

Hi experts,
Is it suggested to use call Transaction and session method in the same Program ?
i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple transaction updations ?

Hi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC.

Purchasing new iMac (27 i5), what is best method to transfer programs/files/documents from 24" iMAC? What is the best method to remove personal data from OS?

Purchasing a new iMac (27 i5), what is the best method to transfer programs/files,documents from a 24" iMac?
What is the best method to remove personal data from the 24" iMac?

Use setup assistant which is offered when you setup your new Mac. It will transfer information from a Time Machine backup, Clone or another Mac.
It's best to do this during setup to avoid issues with duplicate IDs.
Regards

Calling a method to a program

hello,
I have a requirement that I am working on, I need to create a program that will have vendor number and vendor bank account number on the selection screen.
Now what I need to do is I need to call a method from a class that will do some kind of validation, method name is 'validation'
My problem here is that method validation has only vendor bank account number as a parameter. Vendor number is defined as an attribute in the class, let's say z_vendor, and in the method we are using Z_vendor as a vendor number.
Can you please tell me how can I set the value of the attribute to the one that the user will enter using a FM and then how to call the method validation in to my program.
I can not make any change the way class has been declared.
The attribute z_vendor is defined as follows:
1. Level - Instance Attribute
2. Visibility - Public
I am very new to OOPS.. so any help will be really appreciated.

Hi Rahul,
You can do like this:
data:lr_object type ref to CLASS (NAME of your class)
create object lr.
1.lr_object->z_vendor = vendor no.
2. call method lr_object->method name (in Importing parameter pass the vendor bank account no.
And then in the method your vendor no and bank account will be passed.
Thanks
Bhanu

How to call a Proxy method in a program

hello All,
I created proxy which consumes Soap webservice. A method exits in that proxy. I created a program in which am calling the proxy method and passing input parameters(Exporting) and in output(Importing) am not getting any output. When i debugged the code, exceptions were raised during call tranformation.
What might me the error. Is the error in wsdl?
Regards,
Sanjani
Edited by: Sanjani on Dec 17, 2010 1:27 PM

// Modified from Just Java
import java.io.*;
public class execDir {
public static void main(String args[]) {
try {
Runtime rt = Runtime.getRuntime(); // step 1
Process prcs = rt.exec("doDir.bat"); // step 2
InputStreamReader isr = // step 3
new InputStreamReader( prcs.getInputStream() );
BufferedReader br = new BufferedReader( // step 4.
isr );
String line;
while ((line = br.readLine()) != null)
System.out.println(line);
} catch(IOException ioe) { System.out.println(ioe); }
Maybe this will help you.

How to access a table of SAP standard SAP method from external program

Hi Friends,
I have to access a table and modified it defined in a standard SAP method (PROCESS_INPUT_FILTER) of class (CL_HANDLE_MM).
As we normaly do it in case of Standard program
for example: ('(SAPLMEPO)ett[]') here we are accessing internal table ett defined in SAPLMEPO.
so how we can do the same thing if some thing defined in standard SAP method.
Pl. help.

Thanks for the info guys, it will come in handy.
I need to validate that a number is entered with zero or one decimal place, then make sure it is evenly
divisible by .5 in order to test for whole or half numbers only. If not, I use an alert to
display a message when the user leaves the field.
If there is a better way to achieve this, I am all ears!
Thank you for your time,
Gary

RTGS AND NEFT Payment method Through Automatic Programe

Hi Experts,
We are on the process of implementing automatic payments . Client requirement is , they wants to payment through RTGS/NEFT through automatic payment programme. Means when they run payemnt programe for the particular period through RTGS payment is done.
can you please tell me how can i configure this..
Thanx is advance

Hi,
I did not understand your requirements! CAn you please elaborate it a little bit more?
What is RTGS/NEFT ? Is it the format of DME to be sent to the bank? If so, this is configured in FBZP. Almost all of the settings for the f110 program are configured in transaction FBZP. YOu have to define the payment method settings and the bank settings.
Regards,
Renan Correa

Method : RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP

Similar Messages

Maybe you are looking for