Method to convert Subscribers to Internet Subscribers in Unity 7

A client is trying to move away from Exchange and going strictly with Google for email. So they are having to change their subscribers to internet subscribers in Unity Version 7(not Unity Connections). Is there a easy way of doing this without having to delete each subscriber then rebuild them as internet subscribers? I know I can use the bulk administration tool, just trying to see if there is just a conversion method instead of delete and re-add.

Thanks Rob.
We have the same issue (i.e. Exchange is at the first warning, and Unity is giving "ALMOST full" messages we can't skip through). If I'm reading the thread correctly, it sounds like they didn't find a solution either. :/
At least we're not the only ones. : )
Mark

Similar Messages

How can I convert a coaxial internet feed to an ethernet for connection to an AirPort Extreme?

I'm interested in purchasing an AirPort Extreme but I'm not sure how to convert the coaxial internet cable to ethernet to connect to the airport. Does anybody know of a good converter?

If the Internet feed is provided by your Internet Service Provider (ISP) you will need an outboard cable modem that accepts the coaxial signal and converts it to Ethernet for use with the AirPort Extreme.
Contact your Internet Service Provider to learn what modem they recommend for use with their service.

HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me

Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?

Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Anybody know of a method to convert a timestamp to a Nanosec equivalent?

Does anybody know of a method to convert a timestamp object to a nanosecond equivalent since 1970?
Thanks

By a timestamp object you mean an instance of the class java.sql.Timestamp, right? Then the following will give you the nanoseconds:
long nanos = stamp.getTime()*1000000 + stamp.getNanos();

What is the easiest method to convert your Outlook Mail from MS Office 2011 for mac, into Apple Mail?

What is the easiest method to convert your Outlook Mail from MS Office 2011 for Mac, into Apple Mail?

As best I can see from googling it, there is NO easy direct way with Apple's builtin tools. If you Google it you will find that many software companies are selling Apps specifically designed for this purpose. Good luck.
Hope this helps

Is there any native method for converting String value to Hungarian notat..

Hello. there.
This might be very simple question. but I'm just curious about this.
I am wondering if Java API offer the any native method for converting uppercased string value to lowercase which obey the Hungarian notation.
What I'm going to do is using Reflection for excuting RFC function on SAP. I was found it is very similar to JDBC Programming.
Please refer to blow codes.
//mTable
JCoTable mTable = function.getTableParameterList().getTable(rtnTblNm);
    for (int i = 0; i < mTable.getNumRows(); i++) {
     mTable.setRow(i);
     HashMap tmpData = new HashMap ();
          for (int j=0; j < mTable.getNumColumns(); j++) {
                 // I want to set key String [userNo] instead of [USER_NO] here.
          tmpData.put(mTable.getMetaData().getName(j).toLowerCase(), mTable.getString(j));
          result.add(tmpData);
} Basically, The idea was from ibatis framework [com.ibatis.common.beans.classInfo] dropcase();
Any idea would be very helpful for me. Thank you.
Edited by: hosung.seo on Aug 30, 2009 10:42 PM
Edited by: hosung.seo on Aug 30, 2009 10:50 PM

ejp wrote:
Hungarian notation is a representation of logical/arithmetic expressions in postfix form. Not what you're talking about.
So your title is very confusing to the people here who know what it means, which is probably all of them, because people read threads based on their title.From now on, I will pay more attention when I post an question.
If the titile as " +Is there any native method for converting String value to camelcase?"+ would be easier to what i'm pointing at.
As I mentioned in above sorce code, converting [USER_NO] to [userNo] isn't relevant Hungarian notation. yes, it was ambiguous. Agree! :)
But some answer wasn't fit to converting case or recognizing "underscore" delimiter. I was expecting toCamelCase() such as blew. Thanks.
    public static String toCamelCase(String name) {
        String lowerName = name.toLowerCase();
        String[] pieces = lowerName.split("_");
        if (pieces.length == 1) {
            return lowerName;
        StringBuffer result = new StringBuffer(pieces[0]);
        for (int i = 1; i < pieces.length; i++) {
            result.append(Character.toUpperCase(pieces.charAt(0)));
result.append(pieces[i].substring(1));
return result.toString();

Any method to convert OST to PST?

Is there any method to convert ost to pst for outlook recovery without loos any important data during conversion?

You want to helpful Solution to simply Convert OST to PST data? I
would like to recommend Microsoft OST to PST Conversion tool. The third party to can recovers mailboxes data from corrupt Outlook.ost files and 100% safely Conversion of OST file into PST file format and easily loaded Saved PST file into online Exchange/Outlook
server.
Get Free Trial:
http://www.softwareimperial.com/ost-to-pst-converter.html
@Maria Garcia

A method to convert an existing iCloud account to a Child iCloud Account for Family Sharing

I do not see any method by which to convert an existing iCloud account (we have three set up for our kids, all their birthdays are set later than their actual birthdays so we could grab their actual names before they were all gone years ago) to a new Child iCloud Account for use with Family Sharing (namely to be able to take advantage of the new features: Family Calendar, Photostream, 'Ask to Buy' on the Stores, etc. on their own iPad minis.
If this is just not possible under the current scheme, please oh please Apple make this an option - there are probably thousands of others in this same boat, and I refuse to give up my kids' iCloud accounts!

I've read every string and workaround solution on these forums (to date). There's really no good options here.
USER STORY: My kid (age 7) has an iPad 2. I created an email address for him (which he doesn't know about). I created an apple ID for him (which he also doesn't know or care about) and I set up his Apple ID with my credit card. In addition I've set up parental controls on the iPad to lock it down and make it more age appropriate. Over the past year or so it's worked out fine, he sees something he might like, brings the iPad to me and if I approve, I enter the Apple ID Password and approve the purchase. After a year of doing this, he has a nice little collection of apps, kid songs, a few movies, etc. I would like to move my kid over to a legitimate kid account now that Apple has released features that support this. Currently the ability to convert an account does not exist. Seems like it should be easy to change a birthday, etc.
Almost seems like Apple is penalizing us for getting our kid an iPad last year.
Apple - Please consider my user story for your upcoming feature enhancements.

What are methods for converting otf to pdf format in sap script

Hi,
I have a requirement in script i have to convert that that otf file to pdf format,when i use function modules its corrupting that pdf file,So i want convert otf to pdf using class method any one can help me for that.If any sample coding for class method.
Thanks.

ok
CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
       format                = 'PDF'
*      max_linewidth         = 255
     IMPORTING
       bin_filesize          = lv_bin_filesize
*      bin_file              = pdf_xstring
     TABLES
       otf                   = lt_otf
       lines                 = lt_pdf_table
     EXCEPTIONS
       err_max_linewidth     = 1
       err_format            = 2
       err_conv_not_possible = 3
       err_bad_otf           = 4
       OTHERS                = 5.
CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
      bin_filesize                    = lv_bin_filesize
      filename                        = c_name
      filetype                        = 'BIN'
*     APPEND                          = ' '
*     WRITE_FIELD_SEPARATOR           = ' '
*     HEADER                          = '00'
*     TRUNC_TRAILING_BLANKS           = ' '
*     WRITE_LF                        = 'X'
*     COL_SELECT                      = ' '
*     COL_SELECT_MASK                 = ' '
*     DAT_MODE                        = ' '
*     CONFIRM_OVERWRITE               = ' '
*     NO_AUTH_CHECK                   = ' '
*     CODEPAGE                        = ' '
*     IGNORE_CERR                     = ABAP_TRUE
*     REPLACEMENT                     = '#'
*     WRITE_BOM                       = ' '
*     TRUNC_TRAILING_BLANKS_EOL       = 'X'
*     WK1_N_FORMAT                    = ' '
*     WK1_N_SIZE                      = ' '
*     WK1_T_FORMAT                    = ' '
*     WK1_T_SIZE                      = ' '
*     WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
*     SHOW_TRANSFER_STATUS            = ABAP_TRUE
*     VIRUS_SCAN_PROFILE              = '/SCET/GUI_DOWNLOAD'
*   IMPORTING
*     FILELENGTH                      =
     TABLES
       data_tab                        = lt_pdf_table
*     FIELDNAMES                      =
    EXCEPTIONS
      file_write_error                = 1
      no_batch                        = 2
      gui_refuse_filetransfer         = 3
      invalid_type                    = 4
      no_authority                    = 5
      unknown_error                   = 6
      header_not_allowed              = 7
      separator_not_allowed           = 8
      filesize_not_allowed            = 9
      header_too_long                 = 10
      dp_error_create                 = 11
      dp_error_send                   = 12
      dp_error_write                  = 13
      unknown_dp_error                = 14
      access_denied                   = 15
      dp_out_of_memory                = 16
      disk_full                       = 17
      dp_timeout                      = 18
      file_not_found                  = 19
      dataprovider_exception          = 20
      control_flush_error             = 21
      OTHERS                          = 22.
   IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
TRY.
       GET PARAMETER ID 'RECEIPTENT' FIELD lvs_recipient1.
       send_request = cl_bcs=>create_persistent( ).
*      lt_attach_bin = cl_document_bcs=>xstring_to_solix( ip_xstring = lt_solix ).
       APPEND 'Test message' TO lt_text.
       l_sub_50 = lc_test1.
       document = cl_document_bcs=>create_document( i_type    = 'RAW'
                                                    i_text    = lt_text
                                                    i_subject = l_sub_50 ).
       document->add_attachment( i_attachment_type    = 'PDF'
                                 i_attachment_subject = 'script.pdf'
                                 i_att_content_hex    = lt_attach_bin ).
       l_sub_line = lc_test1.
       TRY.
* Build subject line for email.
           CALL METHOD send_request->set_message_subject
             EXPORTING
               ip_subject = l_sub_line.
         CATCH cx_send_req_bcs INTO loref_obj_error.
           PERFORM sub_catch_error1 USING loref_obj_error.
       ENDTRY.
       send_request->set_document( document ).
*      sender    = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
       recipient1 = lvs_recipient1-objkey.
       recipient = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
*      send_request->set_sender( sender ).
       send_request->add_recipient( i_recipient = recipient
                                    i_express   = 'X' ).
       sent_to_all = send_request->send( i_with_error_screen = 'X' ).
       COMMIT WORK.
     CATCH cx_bcs INTO bcs_exception.
       MESSAGE 'eee' TYPE 'S'.
       EXIT.
   ENDTRY.

Migrating subscribers from Unity 4.2 to Unity 7.0

I am upgrading my Exchange 2003 environment to Exchange 2010. I have Unity 4.2 with about 340 subscribers integrated into Exchange 2003.
I have successfully installed Clean install of Unity 7.02.ES with Exchange 2010 in my lab according to the recently posted installation guide.
There are multiple tools available that I can use ie. DiRT, COBRAS and GSM.
I just need to know what is the recommended best practice to move my subscribers along with voice messages, greetings, etc.. from my Unity 4.2 running in parallel with my new Unity 7 in production after the migration from Exchange 2003 to Exchange 2010.

My preference would be to go with COBRAS. If you stand up both Unity systems in the same domain, you are going to use GSM in some
capacity (primarily it's a "move" operation that moves user objects from one system to the other and cleans up all the AD attributes). You can still (and is noted to do so in that scenario) do that as part of a COBRAS migration. Where you gain from COBRAS is the seemless retention of user data, call handler data, and so forth. Where you put in work (but still gain) in a COBRAS migration is that you still need to build out some configurations on the new 7.x server; however, in many cases I see this as an opportunity to avoid the "garbage in, garbage out". You can actually think about your Subscriber Templates, Class of Service, and etc as opposed to, what often occurs, using the defaults. If it were me, I'd go COBRAS. I have a long presentation I can send you a link for on that. In conjunction with COBRAS help (and Jeff Lindborg) frequenting the boards, there is a lot of support out there for you. In addition, COBRAS is a TAC supported tool. My 2 cents.
To answer your question about will GSM work with the new server being built with different service accounts - I would say you have to look at it differently. For those service accounts, GSM won't be needed because they've only ever homed to that server. However, for all of your users - you'd still need GSM to clean up their associate with one system and associate them with the new.
Hailey
Please rate helpful posts!

Would a DSL converter box provide internet for a MacBook Pro?

Hi,
I am new to Mac computers, and am planning on purchasing a MacBook Pro 13 inch. However, I do not have cable and am currently accessing my internet via
a DSL converter box from Windstream, a telephone company local to Erie, PA. If connected this to a MacBook Pro, would this internet connection work for
Safari? Just wondering. Also, does anyone know of the best deals for wireless internet involving a company wothout purchasing cable in case I were to switch
in the near future? Thanks!

I don't why it shouldn't. Lots of folks have DSL. Best deals for internet service depend upon where you are located.

Fm or method for converting doc,pdf or text files to binary format

Hello,
Are you aware of any function module or method which takes input as a file of type doc, pdf or text files and convert it to binary format? Kindly let me know.
This is what i tried and was unsuccessful.
i tried using gui_upload method and pass " asc" as file type while importing file of type .doc but it returns me string filled with strange characters.
I did try converting this string to xstring using cl_proxy_service=>cstring2xstring but i realized my 1st step of uploading file itself was wrong.
Please let me know what can be done if you are aware of how to convert file of various types to binary.
thanks
Pooja

hi All,
thanks alot for the information and help provided by all of you.
I did figure out a way where the word document or pdf can be pretty much loaded with gui_upload. the file type used in the method would be "BIN" the following thing has to be done. declare data type as given below and file would be the complete path along with document name which has to be uploaded
DATA: BEGIN OF res_line,
            raw(255) TYPE x,
         END   OF res_line.
DATA: res_tab LIKE res_line OCCURS 0 WITH HEADER LINE.
data : wf_var_stringx TYPE xstring .
CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = file
        filetype                = 'BIN'
        read_by_line            = 'X'
     has_field_separator     = ' '
     header_length           = 0
     header_line           = 'X'
      IMPORTING
        filelength              = l_filelength
      TABLES
        data_tab                = res_tab
      EXCEPTIONS
       OTHERS                  = 1.
LOOP AT res_tab .
    CONCATENATE wf_var_stringx res_tab-raw INTO wf_var_stringx IN BYTE MODE.
ENDLOOP.
this will upload the file and will file the string x with its content.
hope this helps to some of you.
Thanks
Pooja

Better method to convert pixels to ems

Don't know if my Dreamweaver CS5 can help me do this:
I'm experimenting with making my site more accessible for vision-impaired people by using ems in my CSS style sheet for image sizes as described at http://sperling.com/examples/zoom/
The problem I have is calculating the ems. I have to open the image in Photoshop, use Image Size to figure what the height and width pixels would be at a slightly smaller size, then go to an online site that lets me convert pixels to ems. What a hassle. Shorter path?
- Keith Purtell

First you must establish the base font-size in your CSS like so: This assumes 1em = 100% = 16px (standard browser default).
html {font-size: 100%}
body {font-size: 1em}
Then define your page layout and division widths in ems using the following formula:
1 divided by 16 = 0.0625
multiplied by the number of pixels required
= value in ems.
0.0625 X 900px = 56.25em
0.0625 X 300px = 18.75em
0.0625 X 150px = 9.375em
#wrapper { width: 56.25em}
#divName {width: 18.75em}
#divName img {width: 9.375em; height: 9.375em}
IMPORTANT! If you don't wrap elastic images inside elastic containers, your page will fall apart when people increase text size in browser.
You can see a working DEMO of this method here:
http://alt-web.com/TEST/Resizable-ems-test.html
Good luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Can I Convert My 5GB Internet Only to Phone Plan???

Hmmmm, over 50 views & not one reply to my earlier queery . . . perhaps I did not phrase my question clearly.
I currently have a Verizon 5GB Internet Only plan that I started in December 2010 with the acquisition of my MiFi 2200 HotSpot. At first all was great, but in the last two months, not only has the speed degraded to the point where it's not even worth trying to download a video from YouTube or partake in a conversation with friends, but my usage seems to have gone through the roof!
Before I was using 3 ~ 4 GB / month, two months ago it was 5 GB & this past month, I had to pay an extra $10 for my overage of 1 GB. I am only home during the evenings & early mornings, and only have my mac mini & mac book currently hooked up to the network which I have been told is "well-protected" & secure.
That all said, I am less than thrilled with the MiFi HotSpot system & am exploring other options for my internet access. I currently have my cell phone with another carrier & that contract will expire in two months.
What I wanted to know, was if there was a way that I might be able to "transfer" the balance (18 months) of my Verizon contract to a cell phone plan without incurring the exhorbitant Early Termination Fees.
Any help or ideas would be much appreciated.

I would like to thank all of our community members for your support. Here is the deal, since you are under contract if you cancel the line there would be an Early Termination fee. However, as a loyal customer we will allow you to turn the line into a voice line. You will have to provide your own phone or purchase a phone at full retail value. There are always rules regarding data lines and this solution will not fit every case. I recommend that if anyone else is thinking about switching their lines from data to voice or vice versa, that you call our customer service department to discuss you individual options.
Our Customer Service Department is open from 6:00 a.m. to 11:00 p.m., daily. If you wish to speak to a representative, please call 1-800-922-0204 from a different phone.

Is there a method of converting .cr2 files to DNG when tethered in Lightroom 5.7.1?

don't see any setup parameters in either auto import or tethered capture ...
is there any plugin that will do this on a watched folder?
thanks

No need to do all that exporting and importing. LR will allow you to convert photos to DNG in place in the Catalog. I believe it's under the Photo menu, but I'm not looking at my laptop right now. The menu choice is simply "Convert photos to DNG."
mh++

Method to convert Subscribers to Internet Subscribers in Unity 7

Similar Messages

Maybe you are looking for