Method to use Set-EventLogLevel against all the Exchange 2013 servers.

Recently Ran into an issue where we needed to troubleshoot an issue that required us to turn up the logging level across multiple exchange servers using the Set-EventLogLevel command. 
I was trying to figure out a way to run this command without having to go to each of the exchange servers. 
PSSession doesn't work because then your not running the exchange commandlets on that remote system.
Invoke-Command doesn't work either.
Unfortunately because of some security settings using Connect-ExchangeServer doesn't proxy in the command either. 
So any ideas on how we can execute an exchange cmdlet against multiple exchange servers from powershell.
Jeff C

I can set it via this method on Exchange 2010, I don't have Exchange 2013 in front of me but it should be same I believe.
This will set MSExchangeIS\9000 Private\Logons level from Lowest to Low of all the Exchange server in my environment
$test = Get-ExchangeServer
$test | %{Set-eventloglevel "$_\MSExchangeIS\9000 Private\Logons" -Level Low}
To see if those are set or not run this...
$test | %{get-eventloglevel "$_\MSExchangeIS\9000 Private\Logons"}
Blog
|
Get your Exchange Powershell Tip of the Day from here

Similar Messages

  • HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

    Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
    I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

    Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
    else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
    post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
    couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
    John

  • We have family sharing set up between all the family idevices. Can we share either Notes or a Pages document between devices?

    We have family sharing set up between all the family I devices. We want to collaborate on a document.  Can we share either Notes or a Pages document between devices?  We are all using iPad 2 or later and/or iPod touch or iPhone 5

    The "Sharing" part of Family Sharing refers mainly to purchased content. iCloud synced content such as Notes and contacts as well as documents is not included. While I do not know of anyway to share notes, iWorks documents can be shared directly from the app via an iCloud link.

  • HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

    I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

  • On of the reasons I stayed with android is because I use my google calendar all the time - I love that it syncs with my computer and phone and my daughter's as well so we all know what we are doing. Do you know if the iphone does that?

    One of the reasons I have used Androids , is because I use my Google calendar all the time. It syncs with my computer and phone and my daughter's as well, so we all know what we are doing. Do you know if the iPhone does that?

    Here is the info for syncing google calendars
    http://support.apple.com/kb/HT4372

  • Same the same query against all the schemas

    Hi all,I am a newbie to databases
    I have a requirement where in in need to run the same query against all the schema s in the database.what would be the best way to do it.other than logging into each user and running query.Its a complex query I can't do a direct select  from sys or other even for I will have to change a lot of things.Is there a easier way to do it ??
    Thanks in advance

    990051 wrote:
    Hi all,I am a newbie to databases
    I have a requirement where in in need to run the same query against all the schema s in the database.what would be the best way to do it.other than logging into each user and running query.Its a complex query I can't do a direct select  from sys or other even for I will have to change a lot of things.Is there a easier way to do it ??
    Thanks in advance
    you have a choice between logging into each user & running the SQL or you can log into each user & run the SQL.

  • How do I change my short name on Yosemite OS X? I can't seem to do it the way I used to change it all the time on Mavericks.

    I can't seem to do it the way I used to change it all the time on Mavericks.
    There was a text box after I clicked on the lock after I went to Users and Groups in System Preferences, but now it's gone.
    By short name, I mean the name that appears on your lock screen when you log in.
    P.S. I use a MacBook Air Early 2014 version, 13-inch.
    I upgraded to Yosemite 2 days ago.

    I found how to do it.
    Go to SystemPreferences - Users&Groups - Right-click on your account at the left hand side bar- change your FULL NAME ONLY
    If you change anything else the system might break but changing the full name causes no damage.
    So I changed my name and am working fine with my Mac.
    Cheers!
    mollaturnup

  • For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

    For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • Setting timeout for all the web test scripts in the solution

    Hello,
    I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
    the timeout parameter from the Properties window.
    Is there any common setting for timeout available which would be acting across all the scripts?
    Thanks.

    Hello,
    We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
    Timeout Property in a web test plugin to set Timeout for all requests in a web test.
    About how to write a web test plugin, please see:
    How to: Create a Web Performance Test Plug-In
    Best regards,
    Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support
    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • One PI set up for all the outbound interfaces

    Hello Friends,
    We have set of interfaces from SAP to 3rd party using PI system. We will not do any mapping for any interface in PI
    We will receive the IDocs ( Orders , deliveries , shipping and alll ) from SAP  and send it to 3rd party.
    is there any way to send these IDoc's with only set up in PI ... only one repository and directory for all the messages )
    Thanks

    Hi
    One way could be that on save of each transaction or event, an xml file is created which can be passed to the receiver.
    Regards
    Monika

  • Using 05 inspection type, all the materials moves to inspection lot

    Dear SAP Gurus,
    Using the 05-inspection type in material master for by product material, all the material goes to inspection lot.
    how to control the inpection lot movement, i have set a plan that the inspection will be carried through  a workcenter,but it moves all the materials to inspection lot.
    Since all the materials are moving to inspection lot, i have changed my inpsection type to 02 (goods issue), but the problem is,  i couldn't able to record the results for the created inspection lot.
    Kindly guide me and correct my process flow,
    Thanks in advance
    Thanks and Regards,
    R.Diwakar

    Dear Guru,
    Thanks for your response
    Sorry for not so clear ....
    My scenario is that, the user requires to have a inspection lot for their By-Product. during the production order, after manufacturing say 30000 material, for them the 30000 material should directly posted to the unrestricted usage and a sample maerial should go to inspection lot, where same will be inspected and transfered to unrestricted usage, through QA32.
    Based on their requirement, i have set the inspection type -05 in material master and a workcenter specifically created for the quality testing, so that a sample quantity can be produced and flows to the inpection lot,
    but it doesnt works,the produced materials are all going to inspection lot.
    Kindly guide me on this,
    Thanks in advance
    R.Diwakar

  • Why Lightroom keeps using 30% CPU power all the time?

    Hello all,
    I am relatively new to LIghtRoom.
    I started working on a new set of photos  (400 app.). I opened it as new directory.
    Since then, all the time I work on theses pictures Lightroom keeps using app. 30% of CPU time.
    The over all time I spent on these photos is estimated to be more then 30 hours (yes, I am slow and open each in Photoshop while Lightroom is still opened). So I guess Lightroom finished all the rendering it wished to do.
    My question is why and what it keeps calculating and is there a way to stop it?
    System configuration:
    Single core Intel Pentium 4 CPU, 3.6 GHz (Hyper Threading allowed)
    2 GB RAM
    NVidia 6600 based graphics card (256 MB)
    Both LightRoom 2.3 and PhotoShop CS4 are opened
    Please help - the system is slow anyway. It can realy use those extra CPU power.
    Utzly

    utzly wrote:
    But I get a warning that changes I made to pictures in LR might not be
    visible in other applications. Dose this mean that when I send the picture
    to PhotoShop, or open the raw file later with bridge, all the editing inside
    LR will not show?
    The warning badge can be switched off from within View Options panel (Library module View menu) by unchecking  the option labelled Unsaved Metadata.
    With regard to your question as to whether Lr edits will show in Photoshop and Bridge/ACR - you'll be fine with Photoshop. However, for Lr edits to be visible in Bridge/ACR you will now have to manually save the metadata to each file (i.e. select file(s) then hit Cmd/Ctrl+S to save metadata to file).

  • How to use evdre to display all the levels under the node user choose

    I used SELF,LDEP(6) in the memberset of evdre trying to display all the 6 levels from the top node of NetIncome, all the display all the level with the correct amount except the top node which is displayed in the row key, but all the cell which should be the aggregation of all it's children is blank, if I choose only self, it shows the amount with only top level. how could I all the level and the corresponding amount display?

    Hi,
    Did you try SELF,ALL ?
    Hope it works...
    regards,
    Raju

  • Why are some web sites that i have been using for years now all the sudden changing themselves from Standards compliance mode to Quirks mode? How do I change them back to Standards compliance mode?

    Like I will be checking on an account { page is fine} go to a different screen then go back.... This is the fun part. The page starts off normal then all the sudden it shrinks and moves to the right side of the page with out me touching anything. I have had this happen to me a few different times and could not seem to get the help I needed. I bring up another page, look at page info and it says Rendering mode - Standards compliance mode, but on the messed up page it says Quirks mode. How do I get it back to Standards compliance mode?

    Good day ... As I leave California I am still very puzzled at how Yahoo can hijack my pages while on the internet ...? A friend of mine who lives here is also puzzled at how this is happening. I have taken screen grabs and would video it if that is possible ...? The screen grabs have the time taken on each grab, so one can see how fast this happens .. in a matter of seconds Yahoo jumps in with no relevance to my link I was trying to get to or the last hit or any thing stored in my history ... Is this possible ..? As I said I use a Macbook Pro 17", Os X 10.9.5, firefox 33.0.0 ..... Where is the fault ... Is my system compromised ..?
    I am now in South Africa and the problem still exists ... Please see screen grabs that I took and uploaded before ... Please help as I like Firefox over Safari, and do not wish to change ....

  • Why this site used php files in all the pages?

    Hola
    I download my friend's site and ALL the pages are in a folder with the file name index.php ... WHY?
    Example;
    Name of folder; gallery
    Inside this folder, a file with the name index.php
    Name of folder; contact
    Inside this folder, a file with the name index.php
    It has an "includes" folder with files for ;
    header.php, footer.php, content.php and functions.php
    and so on.
    Now, this site has ONLY 7 pages, it's not like it's a monster site, so
    what is the purpose of using php in every single page?
    I have to tell you that my friend has a program call CKeditor and CKfinder to
    edited her website.
    Not sure if this is the reason why this site has been coded all of it with php files.
    I'm waiting impatiently for your responce

    >Now, this site has ONLY 7 pages, it's not like it's a monster site, so
    >what is the purpose of using php in every single page?
    The reason for using php extension or not has absolutely nothing to do with the size of the site. If the site uses dynamic pages, then the page need a dynamic page extension. Even sites without dynamic pages often use .php in anticipation of using them so the file names won't need to be changed down the road.
    Now, if your question is more about why they created separate directories for each page, it's probably so the url's can be accessed without including the file extension, Ex
    example.com/contact
    instead of
    example.com/contact.php

Maybe you are looking for