Metric collection error for Oracle 10g(10.2.0.4) database.

Hi,
i just confirured OEM11G(11.1.0.1) on my client test machine and installed 11.1.0.1 agent on one target where 10.2.0.4 database is running. OS is windows 2003 R2.
after installing the agent, i am able to see the database name in the oem --> database tab. but its status is "metric collection error" how ever i am able to see the details about datafiles etc..but in the status sheet it is showing as "metric collection error". i checked the dbsnmp user name and pasword. both are working. i tried to reconfigure the databae manually. it is erroring out with the following error.
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
Can any body help me to take it forward.
REgards
DBA.

I would check the agent trace file (<AGENT_HOME>\sysman\log\emagent.trc) to see if this gives you any information. To give the Log on as batch privilege will not help (to what user?) I think. It will if you start patching using Grid Control.
Are you sure the target db is 10.2.0.4? Because it was a issue in 10.2.0.3 and cursor_sharing=similar
Eric

Similar Messages

  • Install error for Oracle 10g on Solaris x86 64-bit.  NETCA won't run

    Hi All,
    I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
    thanks, dave
    ERROR FILE:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xFEEF24E8
    Function=strchr+0x8
    Library=/lib/libc.so.1
    Current Java thread:
         at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
         at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
         at oracle.net.ca.InitialSetup.<init>(Unknown Source)
         at oracle.net.ca.NetCA.main(Unknown Source)
    Dynamic libraries:
    0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
    0xfefc0000      /lib/libthread.so.1
    0xfefd0000      /lib/libdl.so.1
    0xfeed0000      /lib/libc.so.1
    0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
    0xfee80000      /usr/lib/libCrun.so.1
    0xfee50000      /lib/libsocket.so.1
    0xfedc0000      /lib/libnsl.so.1
    0xfeda0000      /lib/libm.so.1
    0xfeeb0000      /usr/lib/libsched.so.1
    0xfe9a0000      /lib/libm.so.2
    0xfed50000      /lib/libscf.so.1
    0xfe980000      /lib/libdoor.so.1
    0xfe960000      /lib/libuutil.so.1
    0xfe940000      /lib/libmd5.so.1
    0xfe920000      /lib/libmp.so.2
    0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
    0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
    0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
    0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
    0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
    0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
    0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
    0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
    0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
    0xf0d50000      /usr/dt/lib/libXm.so.4
    0xf0cf0000      /usr/openwin/lib/libXt.so.4
    0xf0cc0000      /usr/openwin/lib/libXext.so.0
    0xf1890000      /usr/openwin/lib/libXtst.so.1
    0xf0c30000      /usr/openwin/lib/libX11.so.4
    0xf0be0000      /usr/openwin/lib/libdps.so.5
    0xf0a90000      /usr/openwin/lib/libSM.so.6
    0xf0a70000      /usr/openwin/lib/libICE.so.6
    0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
    0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
    0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
    0xf0a10000      /lib/libkstat.so.1
    0xefc40000      /lib/libgen.so.1
    0xefc20000      /lib/librt.so.1
    0xefbf0000      /lib/libaio.so.1
    0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
    eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
    from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
    to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
    tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
    the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
    compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
    the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
    Local Time = Tue Aug 29 13:49:22 2006
    Elapsed Time = 225
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
    #

    I have the same problem on Linux Debian 3.0.
    My /etc/hosts looks like:
    127.0.0.1     localhost.localdomain     localhost
    #192.168.100.1     bt.lan.home     bt
    #192.168.100.5     jacek.lan.home     jacek
    # The following lines are desirable for IPv6 capable hosts
    ::1     ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhostsPlease help.

  • Error while creating datasource userdsn for oracle 10g Errorcode (998)

    while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

    Thanks for your reply , Steve.
    I noticed that there is a default datasouce on the EM with the following parameters:
    <data-source
              class="com.evermind.sql.DriverManagerDataSource"
              name="OracleDS"
              location="jdbc/OracleCoreDS"
              xa-location="jdbc/xa/OracleXADS"
              ejb-location="jdbc/OracleDS"
              connection-driver="oracle.jdbc.driver.OracleDriver"
              username="scott"
              password="->pwForScott"
              url="jdbc:oracle:thin:@localhost:1521:oracle"
              inactivity-timeout="30"
         />
    The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
    What should be the values for location and xa-location attributes from my "test" data source?
    Any help will be greatly appreciated.
    Thanks,
    Shyam

  • Errors using DBMS_SQLTUNE Advisors for Oracle 10g

    I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
    It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
    Message was edited by:
    benprusinski

    Hi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
    1) Is this becuase I'm using bind, but not passing any values?
    2) Can I able to use to this package to tune a procedures instead of sql statement?
    Example output...
    SQL&gt; SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
    2 FROM DUAL;
    DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
    GENERAL INFORMATION SECTION
    Tuning Task Name : my_sql_tuning_task3
    Tuning Task Owner : SCOTT
    Scope : COMPREHENSIVE
    Time Limit(seconds) : 3000
    Completion Status : COMPLETED
    Started at : 02/26/2009 21:44:41
    Completed at : 02/26/2009 21:44:41
    Number of Errors : 1
    DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
    Schema Name: KPRAVEEN
    SQL ID : 479831s42xj1n
    SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
    WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
    a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
    ERRORS SECTION
    SQL&gt;

  • Metric Collection Errors

    I am using a 10.2 OEM agent to monitor various database versions (8i,9i,10g). I understand that using a 10.2 agent on an 8i database is not supported.... from what I have seen, you must use a 10.1 OEM agent. However, we would like to upgrade our 8i databases and therefore do not want to lower our OEM agent version to accomodate something that will phase out soon. In the meantime, I am getting collection errors. Some I was able to fix since error message had perl line number in it.... I know this is unsupported, but hopefully Oracle could list it as a valid work-around. There are just a few messages left:
    Target MYDB
    Type Database Instance
    Metric Data Base parameter collection, Remote Password File, Remote OS Roles and Authentication, DB Password Setting
    Collection Timestamp May 18, 2007 6:02:57 AM
    Error Type Collection Failure
    Message ORA-00900: invalid SQL statement
    This was really 4 different metric error messages. Does anyone have suggestions of how to clear these error messages? I am fine with not collecting this info for our v8 databases. I was wondering if I could delete from sysman.MGMT_CURRENT_METRIC_ERRORS?
    Or if someone knows how to fix these last few errors, that would be even better.
    Thanks.

    No, all oracle8 dbs are at 8.1.7.4 (none at lower version).
    References:
    Metalink: WRONG SQL STATEMENTS IN ESAPRIVREPORTS.PL FOR 8.1.7.4 DATABASES (bug# 6130510)
    Forum: Metric Collection Errors
    Metalink: METRIC COLLECTION ERRORS AGAINST 8.1.7.4 DATABASES MONITORED BY GRID CONTROL (bug# 5921130)
    Steps I have taken:
    1. Used Note:373394.1 to grant appropriate privs
    2. modified perl scripts until collection errors were resolved.
    a) Ran the following statements on Oracle 8.1.7.4 database:
    alter system set "_new_connect_by_enabled" = TRUE;
    grant select on sysauth$ to dbsnmp;
    3. have a handful (5 or 6) of errors left with no perl filenames, line numbers, etc. I would like to figure out how to either suppress these or resolve them so that I don't have to manually filter through metric errors trying to determine which are valid and which are not.
    Thanks.

  • Metric Collection Errors against Application Server 10.1.3.1

    Hi,
    I'm getting metric collection errors like below :
    Target midtier_2.mn224_HTTP Server
    Type Oracle HTTP Server
    Metric Resource Usage
    Collection Timestamp 06-Dec-2007 14:12:22
    Error Type Collection Failure
    Message Missing Properties : [version]
    I'm running Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    The version of the midtier Application Server installation is 10.1.3.1.0
    Can anyone help me with this ?

    Save yourself some heartburn and upgrade to 10.2.0.3...

  • Microsoft SQL Server Metric Collection Errors

    Hi
    I've installed the Microsoft SQL Server plugin.
    I've added a SQL server for monitoring.
    It only monitors / picks up Cache Hit Ratio.
    Then i'm getting the following Metric Collection Errors:
    Database Oct 31, 2006 2:35:45 PM Collection Failure Missing Properties : [pro...
    [b]SQL Server Process Oct 31, 2006 2:35:45 PM Collection Failure Missing Properties : [pro...
    [b]Processor Oct 31, 2006 2:35:45 PM Collection Failure /u/oracle10/OracleHomes/a...
    Error Log Entry Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
    [b]MSSQL DatabaseFile Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
    [b]SQL Server Role Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
    [b]MSSQL Transaction Log Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
    [b]Database Parameter Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
    User Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
    [b]Integrated Security Setting Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
    [b]MSSQL FileGroup Oct 31, 2006 2:27:10 PM Collection Failure Missing Properties : [pro...
    Login Oct 31, 2006 2:25:14 PM Collection Failure Missing Properties : [pro...
    [b]Registry Setting Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
    [b]SQL Server Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
    [b]Database Setting Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
    Target  <servername>.local
    Type  Microsoft SQL Server
    Metric  Database
    Collection Timestamp  Oct 31, 2006 2:35:45 PM
    Error Type  Collection Failure
    Message  [b]Missing Properties : [provided_host_os]
    Thnx,
    Kenneth

    Not sure if you got the plug-in working. If not, read on...
    The error is due to failure in internal computation of the SQL Server Host related information.
    Ensure that
    1. All pre-requisites (specified in SQL Server plug-in Installation Guide) are satisfied
    2. Provided property values for discovery of the SQL Server target are correct
    - JDBC URL has correct port number
    - If you are using older version of SQL Server plug-in, the name of SQL Server
    instance that you provided is correct

  • Can't Create the ODBC connection for Oracle 10g

    Hi,
         I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator library
    Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
    Best Regards,

    mwz wrote:
    I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
    Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

  • SAP Note 830576 - Parameter recommendations for Oracle 10g

    As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
    parameter "db_file_multiblock_read_count".
    In sql prompt it shows:
    SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
    NAME                                 TYPE        VALUE
    db_file_multiblock_read_count        integer     128
    and in brtools it shows:
    58 - db_file_multiblock_read_count      both     no      *       yes   128
    But  I got the following error, when i tried to set it null
    1 * Parameter description (desc) ..... [db block to be read each IO]
    2 * Parameter type (type) ............ [integer]
    3 * Current parameter value (parval) . [128]
    4 * Value in spfile (spfval) ......... []
    5 # New parameter value (value) ...... [null]
    6 - Scope for new value (scope) ...... [both]
    7 # Database instance (instance) ..... []
    8 ~ Comment on update (comment) ...... []
    9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
    BR0662I Enter your choice:
    c
    BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
    BR0663I Your choice: 'c'
    BR0259I Program execution will be continued...
    BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
    BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
    '/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
    ORA-32010: cannot find entry to delete in SPFILE
    BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
    BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
    BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
    BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
    Kinldy let me know, what could me wrong.

    Hi Markus,
    As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
    sapccmsr -DCCMS -j2ee pf=profile value
    INFO: use SAPLOCALHOST hostname
    INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
    INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
    INFO: Central Monitoring System is [XX1]. (found in config file)
    INFO: additional Central Monitoring System is [AS2]. (found in config file)
    ERROR: Cannot open Monitoring Segment 0 rtc = 245
    Last reported error: [249]  CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
    This program runs as unicode. Please use non-unicode version
    Please suggest
    Thanks,
    Anu

  • Error in Oracle 10g (10.0.3) in Servlet Filtering

    Hi
    I found this error on oracle 10g (10.0.3) Version. my same code is working on 9.0.4 can you please tell what is the problem? I am using servlet filtering.
    Mine is swing base application which will call applet and this will call Servlet.
    500 Internal Server Error
    java.lang.IllegalStateException: dispatcher chain is empty
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getCurrentDispatcher(EvermindHttpServletRequest.java:3975)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameters(EvermindHttpServletRequest.java:1393)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2126)
         at com.fmr.cfit.security.IdentityAgent.getUserIdFromParameter(Unknown Source)
         at com.fmr.cfit.security.IdentityAgent.getUserId(Unknown Source)
         at com.fmr.cfit.security.IdentityAgent.doFilter(Unknown Source)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:130)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:210)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:824)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:291)
         at java.lang.Thread.run(Unknown Source)

    I am able to resolve the issue:
    The mistake I was doing was creating ORACLE_HOME in the enviornment variable, as I have Oracle 10 G database and SOA suite on the same machine, so it was creating a clash, the right approach is setting the ORACLE_HOME through command prompt, I was setting ORACLE_HOME because while executing the configure_oid.bat file it requires ORACLE_HOME to be set.
    -Yatan

  • Metric collection Error MS SQL 2005 Backup

    Hi ,
    become on all "german !!! ' ms sql 2005 Server a collection error for the backup. I have install the newest ms sql plug-in .I have Grid Control 10.2.0.5
    the german error Message is :
    WARN collector: <nmecmc.c> Error exit. Error message: Error Querying:Bei der Konvertierung eines char-Datentyps in einen datetime-Datentyp liegt der datetime-Wert außerhalb des gültigen Bereichs.
    com.microsoft.sqlserver.jdbc.SQLServerException: Bei der Konvertierung eines char-Datentyps in einen datetime-Datentyp liegt der datetime-Wert außerhalb des gültigen Bereichs.
         at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(Unknown Source)
         at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source)
         at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(Unknown Source)
         at oracle.sysman.mpi.jdbc.microsoft_sqlserver_database.SQLServerJDBCQuery.executeQuery(SQLServerJDBCQuery.java:263)
         at oracle.sysman.mpi.jdbc.microsoft_sqlserver_database.SQLServerJDBCQuery.main(SQLServerJDBCQuery.java:1152)
    this mean that he have problems to convert char to datetime . But why ?
    On my English Server i habe no Problems with this collection.
    And NO , i can't only install English MS SQL Server . This is a Company Policy .
    Where the error of the collection ?
    Thx

    and one more:
    Cant find the key : SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Replication\\IsInstalled D:\OracleHomes\agent10g/sysman/admin/scripts/emx/microsoft_sqlserver_database\execmethod_32bit is_remote_login=0 namespace=root\default class=StdRegProv "sSubKeyName=SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Replication" sValueName=IsInstalled method=GetDWORDValue noprint=0 em_result=0 SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Replication IsInstalled

  • VSS Agent for Oracle 10g ?

    Hi there,
    I have SAP NW2004s, Windows 2003 server 64bit, Oracle 10g
    4 partition with 1 hdd, C for OS, D for SAP application E for system and oracle logs+archived, F for only database files
    We are trying to get backup in extrinal HDD 3TB HDD... through Symantic exec backup utility ver. 12
    C and D drivers are backup fine, but sometime when server very busy and symantic start full backup for E and D drive database shutdown... sap instance is fine, but only DB instance is stoped
    We are not using Symantec Agent software, is there any other software can help for that for-exmaple VSS for oracle 10g... if yes, where may i get this software any link?
    Why we are not using BR tools:
    1 - as i maintion before when I select "E" drive which is all logs files located symantec stoped db instance
    2 - in case if i am taking backup from brtools full backup online + archived so its only take database backup + archived, not all others structure in case hard-drive failer, and data restore from symantec so its will be ok with C drive and D drive, but its nohting resotre for E and D
    when I try to restore from oracle brtools to restore its getting an error for missing structure in E
    so thats why I am looking only one solution either perfect symantec with online backup
    please give me some advised
    Thanks

    Hi,
    Please use the standard & reliable Backup/Restore methods for any DB, to avoid more headache while Backup/Restore Operations.
    Please refer [this thread|Re: Need some advise]. it will attend your most of questions. Some other alternatives (without using Backup agent) are mentioned there.
    If you use Backup Agent to perform any DB backup, then It will be reliable method to perform Backup/Restore operations of DB.
    With BR*tools u can also perform Non-Database Backup. Please refer [this link|http://help.sap.com/saphelp_NW04/helpdata/en/0c/cd271365debc42bef96ac7fd907787/frameset.htm] and other relative links.
    If you have configured the Backup Exec utility with Oracle agent on the DB server, then you can perform Online Backup by deselecting "Perform the backup offline" option withing that Oracle Backup Job properties.
    Regards,
    Bhavik G. Shroff

  • Registration Key for Oracle 10g

    Iam trying get a registration key for Oracle 10g
    but after choosing DVD or CD Option and hit Continue
    button I get this message:
    We're sorry.
    An unexpected exception has occurred when contacting Database. Cannot proceed further.
    You can change or re-visit previous page(s) by starting a new session.
    If you have questions regarding registration, please contact us.
    Paddy

    I have been unsucesfull in getting the Oracle 10g regitration keys. After I update my profile and hit continue I get a page not found error. Any help will be appreciated.

  • Problem Pro*C for Oracle 10g

    Hello,
    I am compiling pro*c code for Oracle 10g, it is successfully compiling for Oracle 9i. But with Oracle 10g libs it's giving problems.
    This following error msg I m getting while compiling
    /application/Build/code/booking/>mk test
    *.cpp: No such file or directory
    make_depend
    `/opt/oracle/10.2.0/lib/libclntsh.so' is up to date.
    cat: cannot open *.u
    proc ireclen=132 lines=yes iname=pcutils.pc oname=~pcutils.c
    Pro*C/C++: Release 10.2.0.2.0 - Production on Sat May 26 07:39:59 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    System default option values taken from: /opt/oracle/10.2.0/precomp/admin/pcscfg.cfg
    cc -c -DBA_SUN -xCC -I. -I/application/Build/include -I/application/2.6Build/include -I/opt/ba/include - -I/opt/tux80/include ~pcutils.c
    "pcutils.pc", line 58: undefined struct/union member: sqlerrm
    "pcutils.pc", line 58: undefined struct/union member: sqlerrmc
    "pcutils.pc", line 58: warning: left operand of "." must be struct/union object
    "pcutils.pc", line 79: undefined struct/union member: sqlerrm
    "pcutils.pc", line 79: undefined struct/union member: sqlerrmc
    "pcutils.pc", line 79: warning: left operand of "." must be struct/union object
    cc: acomp failed for ~pcutils.c
    *** Error code 2
    make: Fatal error: Command failed for target `pcutils.o'
    Could you please suggest me, what should I do in order to build it.
    Inpreet

    To answer my own question, I'd say it's necessary to install the tarball, NOT the Debian files, for the Enterprise edition (perhaps to Standard is enough?).
    After installation at (for example) /usr/local/oracle, the "proc" precompiler should be at /usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/bin
    The env.variable ORACLE_HOME should be set,
    export ORACLE_HOME=/usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1

  • Re-schedule metric collection in EM Gc 10g

    Hi all,
    I installed OEM/GD 10gR3 on my Linux box and I configured it to monitor 7 databases.
    I configured all the credentials to gather metric information, and every night at around 10.20pm, all the metric collection of the 7 databases start in the same time. As a result, all collection falls into errors:
    myrl04db Database Instance Dec 5, 2008 10:52:49 PM PST Target has encountered metric evaluation errors.
    prod02db Database Instance Dec 5, 2008 10:36:09 PM PST Target has encountered metric evaluation errors.
    dev01db Database Instance Dec 5, 2008 10:31:58 PM PST Target has encountered metric evaluation errors.
    totyr32db Database Instance Dec 5, 2008 10:28:54 PM PST Target has encountered metric evaluation errors.
    And I have to reconfigure the databases to start collecting/monitoring again. Otherwise, I cannot see/operate the database. So every morning I have to go through the pannel to reconfigure it:
    This database is not configured -> Configure Database Instance: Properties -> Next -> Finish
    It takes few minutes every day :'(
    My OMS machine is pretty slow, and I would like to change these jobs to not run in parallel as it is now (~10.30pm).
    The documentation is not very clear on this point. Has somebody already done this ? Where could i find the information ?

    Metrics are gathered all the time according to metric and policy settings. Is there a job in the repository scheduled for that time of day? Did you pursue looking at all of the log files to see what was running at that time? More info would be helpful.

Maybe you are looking for

  • ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '/INS_PRECOMP.mk' in 11g Form

    Hi, I am installing 11g Forms & Report [11.1.2]s on AIX 6.1, all other JDK and Weblogic Server installed Successfully without any error. When i installed 11g Forms & Reports i am getting this below error on 92% of completion. ERROR IN INVOKING TARGET

  • Best External HDD Option

    I am looking for some advice on the best external setup, speed, and capacity wise, its also important to keep in mind this is for a portable setup so I do need to be able to carry it around with me. As far as I know the best option would be for me to

  • Supply Area-BOM Level by Level

    Hi Folks, I am having a problem in fetching the Supply area when a Component is having many sub-assemblies. To be in detail, I am fetching the  DISTINCT Production Order(AUFNR) from MSEG w.r.t to MBLNR and MJAHR. Then w.r.t to this AUFNR I am fetchin

  • Alert configuration - interface based

    Hi, I have the below requirement - Please help. There has to be a report or mail to be generated with the count of messages that have been processed in XI per day. The count has to be grouped by the Business service & Business system names. We need t

  • Very poorly GigaWorks S750 Sub Woofer

    Can anybody in the UK provide any assistance as to where I may be able to get the aforementioned sub repaired please.Not impressed with Creatives support desk one bit, only interested in selling me a very slightly discounted replacement as it is out