Mic doesn't seem to work in applications, but I can hear myself in the Mix
Hello,
I have recently done a PC & OS upgrade.
My previous setup was on WinXp Pro (x86) with an Asus A8R-MVP (S939 with ATI/ULI chipsets) and AMD 3200+ processor. I bought my X-Fi at the same time as these components, and everything was working just fine.
Now I have upgraded to WinXp Pro x64 and an Asus P5W64 WS Pro (S775 with Intel 975X chipsets) and an Intel e6600 processor. I loaded everything up including a few games and everything seemed just fine.
... Until I decided to download TeamSpeak so that I could talk with my guildmates... I could hear them, but they couldn't hear me. The short story is that if I load the Mixer from the systray Volume panel and enable microphone playback, I can hear myself perfectly fine; which should tell me that the Mic & X-fi work.
... But if I load Teamspeak, Windows Sound Recorder, Creative's WaveStudio, etc... (anything that records), it's as if I'm muted as there is nothing there... silence.
I have tried the MSCONFIG "selecti've startup" method to uninstall and reinstall my driver CD and latest driver patch... I have downloaded and installed the latest April 2007 DirectX, I have double checked that the Mic is the selected recording source (+20db and cranked)... all with no success.
It's obvious that alot has changed around the X-FI (OS, mobo & CPU) but the problem seems to be a "software"/driver one... I'd almost have preferred that the Mixer wouldn't have let me hear my voice at all... then I could have nominated the Mic as the problem... but the mixer proves it to be good.
Why is the Mixer the only application that knows that there is sound on the mic channel to deal with?
unbelievable... the amount of RAM is the issue... I found a post (http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8448) on an unrelated matter, but the user solved their issue under X64 by limiting the amount of RAM WinXP x64 was using by editing the boot.ini file.
The basis of the "trick" is to add " /maxmem=4096" to the end of your OS line, but I elected to copy the line and add it to a new entry so I could easily select which "mode" i wanted at boot.... like so...
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition()\WINDOWS="Window s XP Professional x64 Edition - X-Fi tweak" /noexecute=optin /fastdetect /maxmem=4096
amazingly this solved my issue... but now my system properties only report 2Gb instead of 4Gb... unacceptable!
When Can I expect a fix for this Creative?
Similar Messages
-
Apple says Reminders works with Outlook, but I can't find where the lists are displayed in Office or Outlook once they are synced. Any suggestions?
I'll guess you've already discovered the answer to this, but just in case:
Reminders works with Outlook tasks by syncing with iCloud, or through Exchange. You can't sync iOS Reminders with Outlook Tasks via USB/iTunes (like you can do with Notes, Calendar, Contacts).
So the marketing material on Reminders is a little misleading in that it's not specific enough -- there is no syncing without one of those intermediary systems mentioned above.
On a side note, syncing Tasks/Reminders via iCloud is not very good in my opinion:
Requires that you sync to the cloud, even if you have no other use for storing personal data in the cloud.
Requires that the iCloud Control Panel be installed on your PC (not sure about Mac).
After syncing, you'll find new Calendar and Task groups called "iCloud" have been created in Outlook. The calendar groups appear to be created even if you're only syncing Tasks/Remminders (not sure why).
Reminders are stored in the new group (noted above) called "iCloud" rather than in your default Tasks group. This seems to me to be a sort of "parallel" sync, rather than a true sync with Outlook. There are oter implications of your synced tasks being in the new group that I won't go into here, but you can search the interwebs to learn more.
In my own case, I tried iCloud syncing, decided that I didn't like it for the reasons stated above, and then uninstalled (Control Panel and new Outlook groups) with no apparent ill effects.
Though I don't guarantee you'll have the same results, it might be worth a try to see if it suits your purposes. -
Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me? The volumn is turned up but I can't seem to resolve the issue? Thanks
Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
New mic doesn't seem to work with logic
I am using Logic Pro 9.0.0. I recently purchased an Audio Technica AT2020 XLR condenser mic and the Behringer PS400 Phantom Power Supply, which connects to my Audio 8 DJ, and then to my Macbook Pro via USB. I know that the mic is working because I can record vocals in Traktor perfectly, but when I try the mic in Logic, it picks up the mic, but only records buzzing and static. I also have tried my snowball microphone in logic, which surprisingly does work and records vocals perfectly. Any suggestions would be great. Thanks.
DKnSpeck wrote:
Well I've had no problems with this version of Logic until now and don't want to have to re-learn where everything is.
Do you really think 9.0.2 or 9.1.1 are complete overhauls compared to 9.0.0? Well, they're not. ± 99.9969837 % of things are the same in 'all' versions of 9. -
Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386 -
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al -
Email Security Plug-in - Doesn't seem to work with right click or save and send
I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
StarlaAndreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
the 'Added Devices' section. 2. Selecting any task specific product
selector and clicking on 'My Added
Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
User ID (Cisco.com ID used to download software)
Contact Name
Company Name
Contract Number
Product ID
Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete. -
HTML Snippet doesn't seem to work
Hi there
I recently upgraded from iWeb 08 to iWeb 09.
My problem is, HTML Snippet Widget doesn't seem to work.
Even though I am able to drag the HTML Snippet onto my page
and they just look fine on my iMac, when I publish and upload the files,
those counter and ads I made using HTML Snippet are all gone.
I see nothing at the places they should be.
What should I do?
Or am I missing something?Thanks for reply. Old Toad,
I'm hosting my site using third party server, not by using MobileMe.
My counter is made by third party as well.
Here's one of my page using iWeb 08.
http://americatvfilmnotes.web.fc2.com/Public_Enemies.html
Everything is fine.
I can see every ads I put there.
And here's the one I made by basically copying format from the page above.
But this time, I used iWeb 09 and alas,
All my ads are gone.
http://americatvfilmnotes.web.fc2.com/Cheri.html
I just added the counter for this page and uploaded but
I cannot see it as well.
Of course I can see them on my iWeb 09.
I used Cyberduck to upload.
Anyways, the point is, why I cannot do things I could before when
I was using iWeb 08?
I think I'm totally lost. -
Hi, I would appreciate if someone could assist with the following. On the Numbers application on my Ipad, the 'VALUE' function doesn't seem to work correctly on the string/text which I want to convert to a value. It gives me an error (in my example: 'VALUE requires a string specifying a number, but found "-14308.65" instead.'
The exact same document (if converted from Numbers to excel), displays the converted string/text correctly in MS Excel as a value though.click on the cell then in the formula bar and use the arrow keys to move the cursor to see if there are any other characters in the cell that could confuse the function. Also make sure the localization for your country is correct in System Prefs.
Maybe copy the EXACT contents of the cell and post here. -
When using Acrobat - Adobe Software License Agreement Pops Up - Accept doesn't seem to work - Application then automatically closes when existing the License Agreement pop up - Whats going on?
Please try :
Software License Agreement reappears after you click Accept
Adobe's "accept license agreement" pops up way too much and ruins UX
Repeatedly asked to accept license agreement
Hope it helps you.
Regards
Rajshree -
What is going on with the scroll function. It doesn't seem to work ever since I downloaded Mountain Lion.
I've noticed this too...when I'm in Safari, scrolling is a bit jerky and sometimes it stops even though I'm still scrolling...my fingers go right off the trackpad. I just downloaded the new updates onto my brand new macbook air- had to do it manually as "power nap" doesn't work, even after the SMC reset. Lamesauce.
-
How to reflect db changes - Verify Database doesn't seem to work
I have changed a database (MS SQL Server) column from varchar 255 to varchar 1000, but the designer doesn't pick up the change.
I read that db changes can be picked up by using 'Verify Database' feature. It doesn't seem to work for us though. Is there any configuration to turn on for the feature to work properly or any work-around to refresh the database changes?
We are making the database connection using JDBC (JNDI) option since the report is being used in a Java web application.
Any comments or insights will be very much appreciated!Hi Wallie,
Thank you very much for your reply! Here are the answers to your questions.
Are you able to create a new report off the modified database?
==> Yes.
Do new reports see the changes made to the database?
==> No.
Are the reports connecting directly to the database table, or is it a stored procedure, business view, universe being used?
==> Through a business view.
By the way, after trying so many things, I was able to figure out the reason. Since the report is using a view, not directly the table, the view itself had to be recompiled to reflect the table changes so that the view could pass the changes to the report. It was a very good thing to know. Your last question could have been a very helpful insight for this issue! Thank you so much again! -
Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?
Please indicate whether or not the following link helps... I have not had to use it and so I do not know if/when it does help.
Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html -
Annotations - InheritanceType.TABLE_PER_CLASS doesn't seem to work with GF
Hi there,
I'm using the toplink essentials jar file with a stand alone J2SE application. I'm using annotations for ORM with Toplink implementation
What I want to achieve is to map the base class objects to one table, and sub class objects to a different table. Currently - both tables (and objects) have the exact same structure, but I use inheritence in order to identify where should the object be registered. Thus I'm trying to map an inhertiance using TABLE_PER_CLASS type.
It doesn't seem to work:
My classes look like this:
Base class I want to map to REGION table:
@Entity
@Table(name="REGION")
@Inheritance(strategy=InheritanceType.TABLE_PER_CLASS)
public class Region implements BaseBusinessObj
@Id
@Column(name = "REGION_ID", insertable = false, updatable = true)
@GeneratedValue(generator = "regionSeq")
@SequenceGenerator(name = "regionSeq",
sequenceName = "GSM_REGION_ID_SEQ", allocationSize = 1)
private int m_regionId;
@Column(name = "REGION_NAME")
private String m_regionName;
Subclass with exact same structure I want to map to GFR_REGION table which has the exact same database table structure as REGION:
@Entity
@Table(name="GFR_REGION")
public class GfrRegion extends Region
This doesn't work. The Toplink adds entities of the GfrRegion to the REGION table and does not recognize it should go to the GFR_REGION table.
What am I doing wrong?
Thanks,
MichaelHi all,
Any news about the support for TABLE_PER_CLASS in TopLink/EclipseLink ?
The main question is what was the reason for making this an optional strategy for mapping in the specs ? Both OpenJPA and Hibernate have it and there are cases when this is usefull.
From EclipseLink perspective, how difficult would be to add this ? I didn't have a chance yet to closely examine the codebase for EclipseLink, but some architecture diagrams with some design decisions explained would help to community to better understand the product and make improvements.
Thank you,
Mircea -
Hibernate hbm2ddl.auto create-drop doesn't seem to work in 10.3 JPA
Greetings,
I'm migrating an JPA application from JBoss 5.0 to WebLogic 10.3. In order to simplify the problem, I have the following entity:
package fr.simplex_software.p204.domain;
import java.io.Serializable;
import javax.persistence.*;
@Entity
@Table(name="AUTHOR")
public class Author implements Serializable
private static final long serialVersionUID = 1L;
@Id
@Column(name="AUTHOR_ID", nullable=false)
@GeneratedValue(strategy=GenerationType.AUTO)
private Long id;
public Long getId()
return id;
public void setId(Long id)
this.id = id;
I also have the following persistence.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="p204-ejbPU" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>java:/jdbc/TestDS</jta-data-source>
<exclude-unlisted-classes>false</exclude-unlisted-classes>
<properties>
<property name="hibernate.hbm2ddl.auto" value="create-drop"/>
</properties>
</persistence-unit>
</persistence>
When I deploy the application in JBoss 5.0, the table AUTHOR is created. When I deploy the same in WebLogic 10.3, the table isn't created and nothing happens. Should I do anything of special ?
Many thanks in advance for any help.
Kind regards,
NicolasHi Matt, thanks for your reply. Yes, I did. Actually I'm testing the JDBC data-source in WebLogic console and the test is successfull. Also, exactly the same app correctly deploys in JBoss. In the WebLogic console I can see my EAR deployed, I'm running some standalone clients against some SLSB in the EAR and they work properly and I'm sure that if I'm manually creating the data-model, the JPA entities will work. The only thing which doesn't seem to work is the automatically data-model creation. I thought that Hibernate may not be so intimatelly integrated with WebLogic as with JBoss and I tried to use Kodo, but I didn't find any auto create-drop equivalent feature. I continue digging but stiil interested by any suggestion, if any.
Many thanks in advance,
Nicolas
Maybe you are looking for
-
HT201269 I purchased a new computer and I want to sync my iphone and ipad to it in the future
I have a new computer, and I want to use the new computer to sync my iPhone 5 and iPad 3 with at&t data
-
Automatic import transport request
Hi Folks, We are transporting requests from DEV to QA but they are not being imported(changes are not being reflected in QA).What i am doing is manually i am importing to QA. My query is is there any way by which automatically import i
-
Installation mySAP ERP 2005 on Linux SuSe 10
Hello, I tried to install mySAP ERP 2005 on Linux Suse 10 with 8 GB RAM and enough harddisk space (6 x 250 GB) as a central system. But the Installations stops always in the "Import Abap" step with jobs: running 3 , wating 22 , completed 13, failed 0
-
Setup of 11g database: configuration assistants failed
Hello, I have downloaded Oracle 11g from www.oracle.com and run installer in my Fedora 7 Linux (before doing it I prepared my system - accounts, kernel parameters). The problem is that during setup of database I got "Oracle Net"configuration error (i
-
Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."