Mic doesn't work after upgrade to iOS 7.0.2 ? go to settings privacy microphones and allow access( green button) to apps This worked for me

Mic doesn't work on iPad 2 after upgrade to ios7.0.2? Go to settings / privacy/ microphones. Then allow access to relevant apps (green button)
This worked for me on skype, vocal live, mic pro apps

Can't believe this worked! I had same issue since upgrade, searched web, found this... Hoover the mic for around 15 seconds... It only flaming well worked!  

Similar Messages

  • ITunes doesn't work after upgrade to iOS 6

    iTunes doesn't work after upgrade to iOS 6. The white screen with gray tape above appears, and nothing more happens. Reinstalling/restoring iOS doesn't help. I have contacted support team in my country (Russia) by phone, but they could not solve the problem. Is there downgrade to iOS 5.1.1 available?

    What printer are you using?  Is it listed here:
    http://support.apple.com/kb/ht4356

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Location services is stopped working after upgrading to iOS 5

    Hi, Location services is not working after upgrading to iOS 5. How can i switch it on?

    Try resetting the iPod.  I had to do that to get my iPod to show via FindMyiPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • How do I get print n share to work after upgrade to iOS 5.  I can print from this app thru wifi.  But it can,t print mail, web pages, etc..

    How do I get print n share to work after upgrade to iOS 5.  I can print from the app thru wifi and PC. However am unable to print mail, web pages, etc..
    In mail when I try to print it just says can,t find air printers.  It used to say print with print  n share.

    I sent e-mail to developer regarding this and they said that basically Apple has denied them access to the Airprint dialog in the new source code for iOS 5.  So, the only way to print to pdf is to capture the e-mail or webpage in the internal apps within Print n Share.  INHO, this really *****.  Apple should make printing to pdf files just a standard feature of all their apps.  If they don't do this, they are going to lose alot of business to the Adroid world as pdf file format is the business standard for all documents.

  • IPhone 4 home button doesn't work after upgrading to IOS 7

    After upgrading to IOS 7 today, my home button stopped working. Just curious if anyone has experienced this? It worked at for a few hours, then all the sudden it stopped. Maybe it just randomly broke. I've never had an issue before today. Thanks for the help.

    Well, it just, randomly, started working. I didn't do anything.

  • HT4528 iPhone 4s' wifi doesn't work after upgrading to iOS 7

    My Verizon iPhone 4s will not connect to wifi after upgrading to iOS 7. You would think Apple would have figured this problem out before releasing iOS 7 to the public. Any fixes?

    After having trying everything out on the web, I found a fix that worked out. The thing to do is to deactivate your phone and then reactivate it. The way to do it is to first power off the phone. Then take out the SIM card. Then power on the phone and make an emergency call for about 5 sec. Turn the power off. Place the SIM card back into the phone. Power on the phone and plug it into the computer and to itune. Itune will then ask for your user name and password. The wifi will be working.
    All you have to do then, is reinstall your saved restored file.
    That's it !!

  • Why doesn't visual voicemail work after upgrading to ios 7?

    After upgrading to iOS 7, visual voicemail on my iPhone 5 (Verizon) is no longer available. When I select voicemail, instead of showing the list of saved and new voicemail messages, it dials the voicemail number and I have to enter my password to retreive messages. I tried resetting my phone, re-entering my voicemail password, changing my voicemail password (both on the phone and on Verizon's website), leaving myself a voicemail message...nothing seems to work.

    I have the same issue with my iPhone 4 and german T-Mobile. After updating to iOS 7 my mailbox does not work for callers, just tells them I did not answer the call, and visual voicemail on my phone is not working and just calls the standard voicemail.
    I tried to set a new password for visual voicemail in the phone settings (as supposed to do in some forums), but this just hangs after entering the new pin twice.
    I changed the settings in the mailbox menu, so callers can record a message on my mailbox again, but visual voicemail still is not reactivated.

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • Keyboard shortcuts no longer work after upgrade to ios 6

    After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work.  Not only that I can't change them either.  If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in.   My iPad 2 doesn't have this problem, only my iPhone 4S.
    I tried restarting as well as doing a reset (hold home and power button).
    Any idea how to fix this? 

    If you want to go through all the steps I took:
    1. Restart
    2. Soft reset (hold home and power until Apple logo appears)
    3. Reset keyboard dictionary
    4. Reset all settings
    5. Clear autofill
    Only after the last step did things start working.  Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take.  Sometimes trying to delete a shortcut would crash the settings app.  In all cases the shortcuts didn't work.

  • Keyboard shortcuts stopped working after upgrading to iOS 7

    Does anyone know how to make the keyboard shortcuts start working again in iOS 8? After I upgraded to I OS 8 on my iPad air, the keyboard shortcut stopped working. Is there anyone who knows how to make this work again? All the fixes online pertain to iOS 7 and earlier, and they're not applicable for iOS 8.
    Hope someone can help!
    Thanks!

    I lost all my keyboard shortcuts on my iPhone 5s after upgrading to iOS 8. They still showed up on my iPad Air (iOS 8) and iMac (10.9.5). There were, however, massive sync problems, sometimes they would only flow from one device to all the others, sometimes from one device to only one of the other two, sometimes not at all.
    I deleted all my shortcuts and started from scratch, deleting “~/Library/Application Support/Ubiquity”, ~/Library/Dictionaries” and “~/Library/Mobile Documents/com~apple~TextInput” from the iMac and KeyboardDomain from my iOS devices.
    Rebooted everything a dozen times.
    Toggled Documents & Data Sync off and on a dozen times too in all kinds of combination with rebooting and deleting the aforementioned files.
    Everything always starts working and syncing fine for a very short while, but sooner or later one of my devices stops receiving new shortcuts as I re-add them.
    I reboot that device and it catches up. I enter new shortcuts, and that device doesn’t get any new shortcuts. This time, a reboot doesn’t fix anything.
    After using my devices for a while, I notice shortcuts are entirely gone from both the iPhone and iPad, but not from the iMac.
    I even upgraded my iPhone 5s to a 6, and right off the bat it had issues with keyboard shortcut sync. I also setup my iPad as new, and same thing: right off the bat, sync issues with keyboard shortcuts.

  • Hdmi adapter not working after upgrade to iOS 8

    My Hdmi adapter (orig. Apple) is not working anymore after upgrade to iOS 8, is there any solution.

    The IOS 8 update has nothing to do with the failure of the device. I have a HDMI adapter and it has worked fine through IOS 6, IOS 7 and IOS 8.
    You may want to restart your device by holding the home and power button until the Apple logo appears. If the adapter still fails to work you need to determine if the adapter has failed or the port on your device has failed. Best solution is to go to the Apple store with the device and the adapter. If your adapter has failed it may be under warranty if you still have the sales receipt. If the port on your device is bad then the Apple store will be able to provide you with options.

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

Maybe you are looking for