MIC Selection in certificate profile on the base varsion.

Dear Experts,
i am not able to get my required MIC with valid task list selection on the date base, I have a MIC with versions 1,2,and 3 i need to select the MIC with version 1, i have created a certificate profile and for selecting the MIC i have chosen from Extras- Characteristic from valid task list and gave the valid group and the old date in which the MIC with version 1 is valid after selecting the MIC if i go and check in the display MIC i am observing the new MIC with version 3 only, But if i directly enter the MIC and its version number it is selected where as i am not getting it when i select it from task list, please let me know if the behavior is as per the standard SAP or not and is there any possibility to select the old version MIC from the Task list directly.
Regards,
Naveen.

Hi Sujith,
For example:
My MIC Details:
MIC       Version     Created       and Changed
A        -       1        -   17.10.2008
A        -       2        -   17.10.2008   and 22.06.2011
A        -       3        -   17.10.2008   and 22.06.2011
A        -       4        -    17.10.2008 and 12.10.2011
Task List:
Group           Change number          Valid from              MIC      Version
   1          -        NA                      -     23.10.2008      -       A      -      1
   1          -      10000008994       -     20.10.2011      -       A      -      4
Change number details:
10000008994    Created on:22.06.2011 changed on:18.10.2011 and Valid from date:20.10.2011.
Now i created Certificate Profile today and while selecting the MIN from Task list i gave the details as Group and valid from date as 19.10.2011 and found the MIC A with version 1 and selected the version and after saving when i go and check the MIC details i found it as MIC A with version 4 dint understand why it is version 4 even after i selected version 1 and saved it.
Can you please comment on this why it is changing like this but one thing i observed is if i directly enter the MIC and give the version as 1 and save, it is remaining the same.l am getting this problem only when i select it through task list.
Regards,
Naveen.
Edited by: vaddapalli naveen on Feb 22, 2012 5:43 PM
Edited by: vaddapalli naveen on Feb 22, 2012 5:48 PM

Similar Messages

How to order CM25 profile on the basis of a field values?

Hi,
I'd like to order a capacity planning table on the basis of values (decreasing) of the field USR02, that is already present in the table. Where could I set that records must be shown in that order? I attach a screenshot to explain you better my scenario
Thank you.
Angelo

Hi Angelo,
Try to use t-code OPDT and define a sort criteria profile with field USR02, after that assign the sort profile into your list profile (With t-code OPD0). Hope it can help you!
Best regards
Tao

"Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.]" for brand new, vanilla Mac App

In OS X Maverick's XCode, I created a brand new Mac > "Cocoa Application", with Core Data and Spotlight Importerl; about as vanilla a Cocoa application I could muster.
Under Preferences > Accounts, I signed in to my Mac Developer Account.
In Targets > Identity, I set Signing to "Mac App Store", and was able to select my Mac Developer Account for "Team".
I then went to Product > Clean, and then Product > Build for... > Running, and then Produt > Archive.
In the Organizer, I select the resulting .app and click "Validate", and hit the Mac App Store radio, and hit "Next", and it's able to log into my Mac Developer Account.
I select my Provisioning Profile in the dropdown, and click "Validate".
It comes back with several errors:
1 - "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.] For more information, visit the Mac OS Developer Portal."
2 - "The bundle identifier cannot be changed from the current value, '{DIFFERENT-BUNDLE-FROM-OTHER-PROJECT}'. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect.
3 - Invalid Code Signing Entitlements. The entitlements in your app bundle signature do not match the ones that are contained in the provision profile. The bundle contains a key that is not included in the provisioning profile: 'com.apple.applications-identifier' in '{BUNDLENAME}.app/Contents/MacOS/{BUNDLENAME}'
I was able to do the same process before, for a vanilla app, before Mavericks. I'm not sure if this is a Mavericks error, or a fact that now I have multiple app projects. Particularly odd is that DIFFERENT-BUNDLE-FROM-OTHER-PROJECT in error (2) is not the same bundle name as the current project's bundle.
Would love any help you can provide! Thank you!

Seen this thread?
New codesign behavior, --deep option
"Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

Single material mtutiple Certificate profile.

How to system will select automatically certificate profile for a particular inspection lot. On the other way for one material more than one certificate profile for different inspection type will be assign in system.

Its certainly depends upon the Material-Inspection lot origin & Inspection type combination for a certificate profile .
A combination of origin and inspection type can only appear once in the list for a material while assigning to a certificate profile.
When a Inspection lot is created system check the MaterialInspection lot origin-Inspection type ---Certificate profile combination.

Regarding Certificate Profile

My client want to have a tool which will have complete overview of all certificate profile in the system.Is it possible to have an extraction out of SAP?Is there any such tool existing presently.If I have to create a new one any suggestion on how to map this such that I can have the overview of all certificate profile in the system.
Please suggest.

Hi,
It does sound like your client is looking for not only certificate profile details, but indeed the records associated with it from wherever in the system. The best way to do this wold be via a bespoke report “pulling in” all the required details they wish to look at.
Obviously the more details required, more fields you’ll need, sometimes depending on how much/level you want to see may require 2 reports. However this will come out in your mapping and why the mapping is a crucial step. I imagine most of the fields you require should be fairly standard and easy to identify as discussed, mostly in the QM area. i.e.
QCVK Certificate profile header
QCVM Certificate profile characteristic level
QPMK Mic data including control indicators etc.
QMSP Material Spec.
etc
The other advantage of the bespoke report is you can apply specific “rules and formulas” to the output to help with analysis. (although that’s the programmers realm ).
Regards

I moved to a new pc but have the FF profile from the old one and how do I find out which FF version the old FF was?

I want to use the old version of FF from my previous pc. I saved the profile folder etc on the old pc. The old HD is attached to the new pc via USB. How do I tell what version the old one was?
After installing the old version on the new pc I want to use the former FF profile file on the new pc installation of FF.
I have the sessionstore backups etc. from 3/21.
BTW I typed all this info earlier and support automatically butted in with a guess to what would be an answer. And in the process overwrote what I typed. Please try to get mozilla to prohibit this behavior.

Sorry to hear that the forum lost your question.
I'm not sure I understand why you need an old version of Firefox. Were you way behind in updates? Normally when you install the current version, it will seamlessly update/convert any obsolete files in your profile folder to current versions.
Perhaps I'm answering the wrong question. If the question is: "how do I get a new installation of Firefox to use all my old settings" then I can give you a way to do that.
''This assumes you might have data in your new Firefox that you don't want to overwrite and preserves your current profile.''
Go ahead and open your old profile folder in a Windows Explorer folder. At this level you should see a bookmarkbackups folder, among others. Later you'll copy the ''entire contents'' of the old profile folder to a new location on your C drive.
'''Overview'''
These are the steps:
# Create a new Firefox profile
# Remove everything from that new profile folder
# Copy in everything from the old profile folder
'''Create a new Firefox profile (Windows)'''
Exit Firefox and start up in the Profile Manager by pasting the following into the Start menu search box (or Run dialog) and pressing Enter:
firefox.exe -P
''Do not delete anything here! Any time you want to switch profiles, exit Firefox and return to this dialog.''
Click the Create Profile button, assign a name like OldSettings, and skip the option to change the folder location. Then select that new profile in the dialog and start Firefox.
'''Open the New Profile folder in Windows Explorer'''
Firefox in the new profile should look like a factory fresh installation. Open the Troubleshooting Information page using either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* Help menu > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table, click the "Show Folder" button. Firefox will launch your brand new profile folder in Windows Explorer.
Leaving that folder open, switch back to Firefox, and Exit. Either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
When Firefox closes, the profile folder should be front and center, or you can activate it using the Task bar.
'''Copy Old Data in Place of New'''
In that new profile folder, select all the contents and delete.
Leaving that window open, switch over to your old profile folder. At this level you should see a file named places.sqlite. If that isn't visible, try moving up a level until you find it.
Select everything (Ctrl+a) and Copy (either right-click > Copy or Ctrl+c).
Switch to the empty new profile folder in other window and Paste (either right-click > Paste or Ctrl+v). This may take a minute since some of the files are large.
'''Start Firefox'''
Firefox should start up in that new profile with the resurrected old profile data. Success?

Converting LUTs to Camera Profiles in the DNG Profile Editor

Hi,
I've just started using the DNG Profile Editor, and can't seem to get the process right.
I have some film LUTs that I'd like to convert to camera profiles for my 5D Mk II.
Here's how I'm trying to do it, maybe someone can help me figure out what I'm doing wrong.
This is what I tried first:
1. Take a Color Chart into Photoshop, apply the LUT via Color Lookup adjustment layer.
2. Save out as 16bit TIFF
3. Open as Camera Raw, then save out as DNG
4. Open the adjusted color chart into DNG Profile Editor, run it through the color chart section to create a recipe of color adjustments.
5. Export out as Camera Profile
But when I open up a 5D image in Lightroom, the profile doesn't show up in the list, so I realised maybe it needs to be saved specifically as a 5D profile, but I can't figure out how.
If I:
1. Do steps 1-4 as above
2. Open a 5D DNG file so that I can set a 5D profile as the base profile
3. Load the recipe
The color adjustments appear on the color wheel, but nothing happens to the 5D image, no colour change at all.
Exporting it (which does say 'Export as 5D profile') does then give me a profile that shows up in Lightroom, but it doesn't do anything to the image...
What's the correct way of doing this?
Thanks!
S

I don’t know claim to know anything about the internals of DNG Camera Profiles, but I’m pretty sure you cannot take a RGB-file (TIF/JPG) DNG and make a raw-file DNG Profile for use with your camera raws, which sounds like what you’re trying to do.
Despite looking like it might work in DNGPE, starting with an RGB-file recipe (rather than a RAW-file recipe) will only lock the specific colors on the color wheel, rather than create a raw-capable camera profile.

Changing the report displayed on the basis of value selected frm the prompt

Hi,
I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
The user will select the report name from the prompt, once done the report that has been selected should show up
on the dashboard page and he should be able to select data on the basis of month and year from it.
Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
need two prompts one for report name and the other for month and year.
Thx :)

Hi Kishore,
When i click on the link given by you it takes me to a page where a link is given with text as under
Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
And when i click on this nothing opens up.
Thx
Edited by: Phantasm on Jun 22, 2010 3:05 AM

Geting select option value on the basis of filtering criteria

Hi
I have a selection parameter field is PRPS-WERKS. when user will go for f4 help, the value should come as filtered on the basis of the condition : select the respective WBS ELEMENT (PRPS- PSPNR) and select the respective PR LINE item. (The relation is PRPS-PSPNR=EBKN-PS_PSP_PNR and EBKN-BANFN = EBAN-BANFN and EBKN-BNFPO = EBAN-BNFPO).now the value iof WERKS is not comming from the database table PRPS itself. how to manage this thing?

Hi,
Refer the link select option in smartforms and read what i suggested..
Regards,
Dhina..

How to valiadate on the basis of employee id selected...

Hi All,
My requirement is to use the validation on the basis of the employee id selected.
My CO
if (pageContext.getParameter("submitButton")!=null)
OAViewObject vo = (OAViewObject)am.findViewObject("EmployeeEOVO1");
if (vo != null)
System.out.println("Inside");
// vo.reset(); //New line added
// vo.next(); //new line added
OARow row = (OARow)vo.getCurrentRow();
String email = row.getAttribute("EmailAddress")+"";
if ((email!=null) && !("null".equals(email)))
System.out.println("Attribute1 "+ email);
int i = email.indexOf("@exlservice.com");
System.out.println("Init i is "+ i);
int j = email.indexOf("@");
if(i != -1 || j == -1)
System.out.println("In the if condition of Email");
throw new OAException("Invalid Email Entered", OAException.ERROR) ;
OAViewObject vo1 = (OAViewObject)am.findViewObject("EmployeeEOVO1");
if (vo1 != null)
System.out.println("Inside");
// vo1.reset(); //New line added
// vo1.next(); //new line added
OARow row1 = (OARow)vo1.getCurrentRow();
// by sombit to add pune
// String empid = null;
// int empid =pageContext.getEmployeeId();
// System.out.println("The value of employee_id"+empid);
String Item = row1.getAttribute("PlBalance")+"";
if ((Item!=null) && !("null".equals(Item)))
System.out.println("PL Balance is "+Item);
Serializable[] params = {Item};
am.invokeMethod("validatePL", params);
/* //by sombit to add pune
String empid = null;
xxpune = (String)pageContext.getEmployeeId();
System.out.println("The value"+empid);*/
My AM
public void validatePL(String Item)
boolean check;
check = validateFormat(Item);
System.out.println("Check IS "+check);
if(check==true)
//throw new OAException("Wrong PL Balance Entered. It should not be greater than 15 OR less than 0", OAException.ERROR) ;
throw new OAException("EXL", "EXL_HR_EEXIT_WRONG_PL");
}

Hi Anil,
I tried your code but this is my My Error Stack
oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2636)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1658)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.lang.NullPointerException
     at exl.oracle.apps.per.eexit.webui.EmployeeCO.processFormRequest(EmployeeCO.java:648)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:804)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1157)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1000)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:966)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:821)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1000)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:966)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:821)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2632)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1658)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
java.lang.NullPointerException
     at exl.oracle.apps.per.eexit.webui.EmployeeCO.processFormRequest(EmployeeCO.java:648)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:804)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1157)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1000)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:966)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:821)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1000)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:966)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:821)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:363)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2632)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1658)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:501)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:422)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

LOV selection fails when there are validation errors on the base page

Hi
I have lovs and some other required fields on a page . If there are any validation error on one of those text fields and if I open the LOV (not related to the text fields) and tries to select
an item from the LOV search results, it doesn't do it until unless I go back to the base page and correct all the validation errors on the text fields eventhough those text fields have nothing to do with the LOV.
Any suggestion is appreciated.
Thanks
Anwar

I am on Anwar's team, and I've been dealing with the same problem, although on a different page.
The JSPX for a contrived example is below. I can provide backing bean code, if needed.
The form contains two LOVs. Both fields are required. If you leave both fields blank and click Continue, you get a red box around both fields and error messages are displayed. If you then click the magnifying glass to select from the first LOV, the LOV pop-up is rendered. However, you cannot make a selection, either by double-clicking a line item or by clicking OK (the OK button has no effect). All you can do is cancel.
Interestingly, the act of clicking the magnifying glass on the first LOV gets rid of the red box around that field. So, once you cancel out, the second LOV actually does work. If there were more than two fields on the page, that wouldn't happen. The problem seems to be that the LOV doesn't work unless there are no validation errors on the page other than for the LOV which is being invoked.
As you can see, immediate="true" is set on both LOVs. The behavior is the same whether this is true or not.
I'm left thinking there must be something obvious that we're missing... but none of us can see it.
Thanks,
KEN
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document title="Add Item">
      <af:form>
        <af:panelGroupLayout>
            <af:panelHeader text="Header">
                <af:panelFormLayout>
                    <af:inputListOfValues label="Id" searchDesc="Search" popupTitle="Supplier Id"
                                          simple="true" required="true" id="supplierId"
                                          model="#{viewScope.AddItemBackingBean.supplierIdListOfValuesModel}"
                                          value="#{viewScope.AddItemValuesBean.supplier.id}"
                                          autoSubmit="true" immediate="true"/>
                    <af:inputListOfValues label="Description" searchDesc="Search" popupTitle="Supplier Id"
                                          simple="true" required="true" id="supplierDescription"
                                          model="#{viewScope.AddItemBackingBean.supplierDescriptionListOfValuesModel}"
                                          value="#{viewScope.AddItemValuesBean.supplier.description}"
                                          autoSubmit="true" immediate="true"/>
                    <f:facet name="footer">
                        <af:panelGroupLayout layout="horizontal" halign="right" >
                          <af:commandButton text="Continue"
                                            actionListener="#{viewScope.AddItemBackingBean.continueAction}"
                                            id="continueButton" />
                        </af:panelGroupLayout>
                    </f:facet>
                </af:panelFormLayout>
            </af:panelHeader>
        </af:panelGroupLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>

Hide selection screen option on the base of Transaction code

Hi ,
i have created one report with two diffrenet transaction code .
now we have two different selection options on the base of Transaction code.
how can i do coding for this .
anyone has any sample code ..
thanks,
Jack

Thanks Subramanian,
INITIALIZATION.
if sy-tcode = tcd1.
perform first_selection_screen.
elseif sy-tcode = tcd2.
perform second_selection_screen.
endif.
FORM first_selection_screen..
SELECTION-SCREEN BEGIN OF BLOCK s1 WITH FRAME TITLE text-s02.
SELECT-OPTIONS: s_date FOR vbrk-fkdat.
SELECT-OPTIONS: s_kunag FOR vbrk-kunag.
SELECTION-SCREEN END OF BLOCK s1.
ENDFORM.
But in this perform if i write code for selection-screen then it gives me syntax error.
error message: within form or function module, selection-screen option is not allowed.
Thanks,
Jack

WHere are the root certificates stored on the iPhone 5C, there is nothing in settings for profile?

WHere can I find the Application Root certificates on my 5C, I need to delete one so I can reload it?

Reinstall the certificate and then navigate to your profiles- is the certificate provisioning, configuration, or wifi certificate based. Or is it other? Please restate...

Display Partner Function on the basis of Selected Partner Function

We have multiple "Ordering Address" and "Goods Supplier" for a particular vendor. When we use a particular vendor at the time of PO creation, we dont want all the OA and GS to be populated in the "Partner Functions" tab. The OA should be populated based on the Vendor & P Org, and on the basis of OA should be selected, the "GA" related to the OA should be populated.For ex, if each vendor has 5 OA and each OA has 3 GS and the user selects a vendor then all 5 OA should be displayed. When the user selects one of the OA, all the 3 GS related to that OA should be displayed.
Is this possible to maintain this scenario?If yes, how can we implement it?
Thanks
TM

Hi,
You can accomplish the above in below EXIT's
There are two function modules available to pass partner data to the PO
EXIT_SAPLEKPA_001 include ZXM06U07
EXIT_SAPLEKPA_002 include ZXM06U08
Also further you should write a logic in the BADI ME_PROCESS_PO_CUST
regards,
Lalita

Cant select the paper ICC profile in the applications page saet-up or print

Cant select the paper ICC profile in the applications page set-up or printer box.
I loaded a new paper profile into what I thought was the proper places(s) and it showed up in some applications but not in another. Does this mean the application is at fault? Can anyone tell me where the profiles are supposed to be installed?
Thank you in advance.

This is from "Ask Chris' forum:
Also, I suspect you are confusing paper types with color profiles. The paper types you see in the driver will not change: http://www.inkjetart.com/news/archive/IJN_01-26-06.html#3

MIC Selection in certificate profile on the base varsion.

Similar Messages

Maybe you are looking for