Microphone volume settings in the FP settings panel are ignored until changed.
When coding a streaming app, we've been noticing a bug in Flash Player where the microphone volume in the Flash Player settings panel is being effectively ignored, in lieu of some sort of default volume, until the user goes into the settings panel and actually changes it. The user has to do this pretty much every single time the page loads, and simply incrementing by about 1% tends to increase the volume by a very significant degree. Furthermore, if the user then decrements the volume in the settings panel by about 2% or so, thereby decreasing it below what it was originally, the volume still tends to be much louder than at first.
The actual volume of the microphone is always being set at some sort of relatively low default, no matter what the meter in the settings panel specifies; but as soon as the user goes in and does anything in that panel, then until they go to another page or something in their browser, the microphone's actual volume will conform to the volume meter in the settings panel. If they continue to change their settings, the microphone will adapt accordingly and proportionately - it just won't actually start off doing so.
What gives? Nothing exotic is being done to the microphone volume in the code - just stuff like setting the gain property within the proper range. We've tried restarting the browser after saving a different volume, deleting the contents of the sys folder to replace the settings.sol files, upgrading the Flash Player we were using, simply left-clicking the page to make sure it was fully in focus, etc. Is there a work-around or a way to avoid this issue? Thanks!
Being as it's completely impossible to write code for embedded Flash content with Flash Player, wouldn't this question be better asked in the Flash Professional or Dreamweaver forum, where there people much more skilled at editing embed code?
Similar Messages
-
I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me
Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).
-
I,can,not,increase,the,size,of,the,font,when,reading,e-mails.,Have,tried,differe nt,settings,in,the,,e-mail,preferences,area.
Step by step, how did you arrive at seeing this agreement?
-
I can't find the 'sync settings' in the mail settings to limit the number of emails stored on my ipad.
That option depends on what kind of mail account it is. On an Exchange account, go to Settings > Mail, Contacts, Calendars > Tap the account and you should see "Mail days to sync." If that option isn't there, you won't be able to change it. You could always clean up your inbox on the server.
-
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing! -
Some of the build-in panels are grouped with my plugin's panel in InDesign CC
My settings for PanelList look like this:
resource LocaleIndex (kSDKDefPanelResourceID)
{ kViewRsrcType,
{ kWildFS, k_Wild, kSDKDefPanelResourceID + index_enUS }
/* PanelList definition.
resource PanelList (kSDKDefPanelResourceID)
// 1st panel in the list
kSDKDefPanelResourceID, // Resource ID for this panel (use SDK default rsrc ID)
kMyPluginID, // ID of plug-in that owns this panel
kIsResizable,
kMTPanelWidgetActionID, // Action ID to show/hide the panel
"MyPlugin:Test", // Shows up in the Window list.
"", // Alternate menu path of the form "Main:Foo" if you want your palette menu item in a second place
0.0, // Alternate Menu position Alternate Menu position for determining menu order
kMyImageRsrcID, kMyPluginID, // Rsrc ID, Plugin ID for a PNG icon resource to use for this palette (when not active)
c_Panel
resource MTPanelWidget(kSDKDefPanelResourceID + index_enUS)
__FILE__, __LINE__, // Localization macro
kMTPanelWidgetID, // WidgetID
kPMRsrcID_None, // RsrcID
kBindAll, // Binding (0=none)
0, 0, 320, 386, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kTrue, // Erase background
kInterfacePaletteFill, // Erase to color
kMTPanelTitleKey, // Panel name
"MyPlugin" // Popup menu name (internal)
The problem is that when I click Window->MyPlugin->Test the built-in panels Articles, Liquid Layout and CrossReferences are also opened and grouped with my panel. I can't understand what I am doing wrong. The situation is the same with all sdk samples that have panels. Please help. 10x in advance.Hi, I had the same problem with mine. I've managed to partially fix it by using a workspace extension.
This is the documentation for it:
Remove the InDesign preferences folder. This ensures that changes made to the workspace extensions appear when InDesign is launched.
Launch InDesign with your plug-ins loaded, so your panels are available in the user interface.
Organize the panels as you want your user to see them for the first time.
Exit InDesign normally.
Locate the “Essentials_CurrentWorkspace.xml” file in the InDesign preferences folder. Duplicate the file and rename the duplicate to the name that you want to use for this workspace extension.
Distribute/Copy the workspace-extension XML file in the InDesign Workspace Extension folder (<app folder>/Presets/InDesign Workspaces/en_US/Workspace Extensions). If the “Workspace Extensions” folder does not exist, create it. The easiest way to distribute the workspace-extension XML file might be in the same installer used to install your plug-ins.
I followed that, and my panels appeared in their own group, as I had laid them out.
However, if I didn't delete my user preferences, the ordering and position was different to how I'd laid them out.
Launch InDesign - move standard panels to make a custom user layout - install plugin - relaunch InDesign - launch plugin panels:
The panels seemed to appear in a random position and order, but in their own tab group - no longer bundled with Artices etc
Then delete user prefs - relaunch InDesign - launch plugin panels:
My custom panel layout appears exactly correct over the default workspace layout.
Obviously, you don't want the user to have to delete their preferences and lose their custom layout, so it's not perfect, but at least it got rid of Articles etc. If your plugin is a single panel, it might just do what you need.
I expect there's a way to solve the random position/order too - I just haven't found it! -
I was successfully synching the iCloud with my old PC (Vista and Outlook 2003?) but cannot get changes to my calendar and contact changes in Outlook to update in the iCloud. THoughts?
I'm having the identical events...Outlook calendar entries grayed out on my PC installed iCloud and absent on my iPhone. iPhone entries do show up in Outlook.
-
My message center in settings shows the wrong phone number, how do I change it
Under settings, messages, send and receive. The phone number listed is my husbands number. How can I change it to mine? It was originally listed under my number.
Go slightly deeper into the settings. You should be looking in Settings>FaceTime>Send and Receive at>You can be reached by iMessages at.
If your phone number is no longer listed as one of the options in that setting, you may have to turn off messages on all of your iOS devices and start all over again in order to make both phone numbers available and accessible for FaceTime and Messages.
Read this for more information.
iOS and OS X: Link your phone number and Apple ID for use -
عملت ضبط إعدادات المصنع ويأتي تفعيل الصفحة ونسيت حساب السحب
ما هو الحل؟
<Edited by Host>You can't use your own Apple ID for that. You bought a used phone and the old owner neglected to disassociate the phone with iCloud; you can't activate it without THEIR password.
-
IPhone 3.0, the WiFi Login Panel and passwords that change daily
Does anybody else use their 3.0 iPhone regularly with a WiFi LAN that requires web login … AND the password changes daily? I connect daily to one that has Cisco authentication that I must get through each day with a different password.
The first few days I ran with 3.0 I was impressed that it detected the need to login and presented me the Login-Panel. However, I think the code/logic of this new 3.0 feature is, in the background, trying to re-login using the previous username/password I gave. If it felt the need to re-login that day, all is well. If it try’s that the next day, it’ll fail. No problem, as the next day it does present the login-panel again and I enter the new user/pswd combo.
However, after doing this for over a month now, about 20% of the time when I go to login in the morning my iPhone studders, crawls, and character echo in the login-panel can drop down to one character every 15 seconds. I’ve had to force power-off and reboot half a dozen times. Not always, but enough to make it a problem.
Anyone else encounter this?No, I have not encountered that situation.
BUT.... I suggest you talk to the System Admin for the Cisco network and ask if they can move you to a user or admin group that does not require daily password changes, or perhaps 802.1x if security is critical?
Maybe... -
Hey guys apple need to sort this volume problem out soon like there is guys who have just bought new phones and it is happening to there's.i went to an apple shop for them to tell me I had to pay £150 to get it replaced I don't want a replacement so clearly they know what the problem is apple need to review this site and act fast before they loose alot of customers.
If you just purchased your iPhone, it will still be under warranty and Apple will replace it at no charge assuming that there hasn't been any damage due to abuse. So anyone with a new iPhone will be taken care of. If your iPhone is out of warranty and it has a hardware problem, then you have to pay the replacement charge regardless of what the problem is. Apple does not repair individual iPhones, they replace them. If you want the iPhone repared rather than replaced, you'll need to send the iPhone to an independent repair shop.
Since you don't say what "volume problem" you're referring to, though, we can't say whether or not this is indeed a hardware problem. Perhaps if you'll detail the problem and what steps you've taken to try and correct it, someone can offer advice.
Regards. -
Hi, i am currently working on a project in NSTC format but seem to have a technical problem. I have exported it (in wmv.) but i want to convert it to MP4 (iPod) and DVD format. Now, I have tried to convert the video with many pieces of software and they all seem to change my timings (e.g a title is shown before it should). This doesnt happen in the .wmv file but it seems to happen on both DVD and NSTC. Am I doing something wrong in premiere or is it another problem?
Thanks in advanceI am not sure that I am following. You have a Sequence in PrP, and have your Titles positioned and their Duration set, as you need. (I'm assuming Lower Thirds, or similar). Your preview verifies that everything is proper and satisfactory. Then, when you Export to certain formats, the Titles have "moved," so that they no longer accompany the proper visual from, say Video Track 1. Is that correct? If so, I am sorry to say that I have no idea how that could happen. I just want to get clarification on the exact problem, and will consider what could be afoot. Also, others will likely benefit from a bit more info.
Good luck,
Hunt -
How to find the reports/Txs that are affected by changes made in NA30
Hi All,
Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
Many thanks & Regards,
VijayaNo idea about any such report but from SAP help got following list of billing reports. It might be helpful
RNAABGR0 IS-H: Revenue Accrual
RNAABRKZ IS-H: Change Billing Indicator of a Case
RNABD000 IS-H: Patient Billing
RNABILB0 IS-H: Change Billing Block via Conditions
RNABILB1 IS-H: Change Billing Block via Conditions (Outpatient Cases)
RNADIN03 IS-H: Billing Document Mass Print Program
RNAFSPER IS-H: Change Billing Block
RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
RNASED00 IS-H: Delete Case Selections
RNASEK00 IS-H: Copy Case Selection
RNASELM0 IS-H: Billing - Process Messages
RNASEL00 IS-H: Case Selection
RNASEL01 IS-H: Case Selection via Outpatient Visits
RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
RNASTO04 IS-H: Cancel Provisional Invoice
RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
RNAENT00 IS-H: Billing Status of Inpatient Cases
RNA_CASCADE_BILLING IS-H: Cascade Bill Processing -
I changed my email for my Apple ID, but on my iCloud it's still registered under my old email, but I can't change it. The only option it has for me to do is to delete that account from my phone but I don't want to lose anything I have on my phone that is linked to my iCloud account
If you go to your iTunes account on the computer, where you changed your email account info, you find a link to other changes for your account info. You may have done all that already, if so next you have to change the info on the device.
To change the device info:
Step 1. Connect to iTunes on the computer and on the "Info" page, check the sync info box. You should notice a change in your email info on the screen . Sync device to the computer.
Step 2. note at the bottom of this "Info" screen a note that says to change you iPad info: Go to Settings on the iPad, then Mail, Contacts, Calendars. Change your email account information here. -
What are the email settings for my ntlworld email on O2
I have an IPhone on O2, my home email is provided by virgin media on NTLworld. I can't pick up or send emails except through my web browser. What are the settings. The Virgin settings don't work
You will need to contact virgin media and find out the appropriate settings.
Maybe you are looking for
-
Problem with JSF Page loading with WAS 6.1.0.2
We are using Trindad Faces & the app server is Websphere 6.1.0.2. When the server starts up, its gives lots of logs (does not say error or warning) as below. 11:13:58:881 EST] 00000019 jsf W com.ibm.ws.jsf.configuration.FacesConfigParser parseShared
-
Loging onto my bank I go to the barclays pege there on the top line is "log in" it used to work when I click on it but has stoped, any button on the first three lines of a web page does not work. I now use Google crome but would like to stay with Fir
-
Does apple care works in cyprus ?! I have iPhone for almost 8 months now and my wifi button grey for 4 times they change my phone 4 times since I bought it i have no idea why that always happening with my phone !! So my warranty it gonna end in oct a
-
How can I stop random photos showing up in photo stream?
I keep getting photos of houses and pictures of women in my photo stream! My iPod Touch is 4th generation and it's secondhand. I have just deleted like at least 100 photos that I never took. How can I stop the photos from being synced into my iPod?
-
I have just downloaded Photoshop CC and it´s in Norwegian. How do I change the interface language to English?