Microsoft Outlook Integration?

Hi,
I was wondering if there is a way to integrate oracle with outlook -- I would want to add tasks/calendar items to outlook from oracle and vice versa.
I've seen references to Oracle Connector for Outlook and Oracle Calendar, but I don't fully understand if these would do what I want them to...
Any information would be appreciated.
Thanks,
Nora

I believe both Oracle Calendar and Oracle Connector for Outlook are tools that are used with the Oracle Collaboration Suite and not stand alone products.

Similar Messages

  • Microsoft outlook Integration with portal

    Hi,
    I have faced a problem when i try to implement N51 : Microsoft OutLook Integration in Best practices for Portal.
    I am bit confused about the following points given in the document. can i know how to follow these steps:
    1.Switch to Windows Explorer of the SAP NetWeaver Portal system.
    2.Locate a server that is on the same trusted domain as the Microsoft Exchange Server with Internet Information Server (IIS) installed.
    3.Copy the MSX-A Component files that came with the Exchange Transport and copy the files to the IIS server (that is C:\SAPExchangeTransport). The MSX-A components are found at <drive>:
    usr\sap\<SID>\<Instance>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange
    (for example C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange).
    4.Double click SAPPXchTest.exe
    This launches SAP EP Test Exchange Transport Setup
    5.Choose Tools -> DLL -> Register
    Configure IIS
    6.Open the Internet Service Manager.
    Without Single Sign-On
    To create and configure an IIS Web Site without single sign-on, proceed as follows:
    1.Create a new Web site with the name SAPExchange and make a note of the port on which this site is running.
    2.Set the permissions to execute.
    3.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport
    4.Open the properties dialog box for the new Web site, and choose the Directory security tab.
    5.Deselect all Authentication modes.
    6.Select Basic Authentication.
    7.Confirm with OK.
    With Single Sign-On
    To create and configure an IIS Web site with single sign-on, proceed as follows:
    1.Select the Web site where the SSO2KerbMap ISAPI module is installed and configured.
    2.Create a new virtual directory with the name SAPExchange beneath this Web site
    3.Set the permissions to Execute.
    4.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport.
    5.Open the properties dialog box for the new Web site, and choose the Directory security tab.
    6.Deselect all Authentication modes.
    7.Select Integrated Windows Authentication.
    8.Confirm with OK.
    Next, i am having these problem also :
    when i try to configure calendar repository(choose System Administration -> System Configuration 
    -> Knowledge Management -> Content Management -> Repository Managers -> Calendar Repository. ), then i am getting the following error.
    " st="b" class="urMsgBarErrBtm" id="MessageBar43b8feb2" ct="MB"> Inside the area "/cm/utilities/acl_factories", unable to find the configuration object "acl_jdbc_rep" referenced by the property "securitymgr.aclcfg" of the configuration object ".../Calendar Repository/ExchangeCalendarRepository".
    Thanks in Advance
    Regards,
    Raju

    Hi,
    I have faced a problem when i try to implement N51 : Microsoft OutLook Integration in Best practices for Portal.
    I am bit confused about the following points given in the document. can i know how to follow these steps:
    1.Switch to Windows Explorer of the SAP NetWeaver Portal system.
    2.Locate a server that is on the same trusted domain as the Microsoft Exchange Server with Internet Information Server (IIS) installed.
    3.Copy the MSX-A Component files that came with the Exchange Transport and copy the files to the IIS server (that is C:\SAPExchangeTransport). The MSX-A components are found at <drive>:
    usr\sap\<SID>\<Instance>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange
    (for example C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.NetWeaver.coll.appl.gw\WEB-INF\external\exchange).
    4.Double click SAPPXchTest.exe
    This launches SAP EP Test Exchange Transport Setup
    5.Choose Tools -> DLL -> Register
    Configure IIS
    6.Open the Internet Service Manager.
    Without Single Sign-On
    To create and configure an IIS Web Site without single sign-on, proceed as follows:
    1.Create a new Web site with the name SAPExchange and make a note of the port on which this site is running.
    2.Set the permissions to execute.
    3.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport
    4.Open the properties dialog box for the new Web site, and choose the Directory security tab.
    5.Deselect all Authentication modes.
    6.Select Basic Authentication.
    7.Confirm with OK.
    With Single Sign-On
    To create and configure an IIS Web site with single sign-on, proceed as follows:
    1.Select the Web site where the SSO2KerbMap ISAPI module is installed and configured.
    2.Create a new virtual directory with the name SAPExchange beneath this Web site
    3.Set the permissions to Execute.
    4.Select the directory you just created as the home directory, for example, c:\SAPExchangeTransport.
    5.Open the properties dialog box for the new Web site, and choose the Directory security tab.
    6.Deselect all Authentication modes.
    7.Select Integrated Windows Authentication.
    8.Confirm with OK.
    Next, i am having these problem also :
    when i try to configure calendar repository(choose System Administration -> System Configuration 
    -> Knowledge Management -> Content Management -> Repository Managers -> Calendar Repository. ), then i am getting the following error.
    " st="b" class="urMsgBarErrBtm" id="MessageBar43b8feb2" ct="MB"> Inside the area "/cm/utilities/acl_factories", unable to find the configuration object "acl_jdbc_rep" referenced by the property "securitymgr.aclcfg" of the configuration object ".../Calendar Repository/ExchangeCalendarRepository".
    Thanks in Advance
    Regards,
    Raju

  • Does Microsoft Outlook Integration Standalone work on 8.8?

    While installing outlook integration standalone, it does not seem to work through the license server.  Will it work with 8.8?

    hello Bill
    i have followed your instructions
    when i startup outlook the addon does not appear
    on the remote desktop of the terminal server everything works fine with the full outlook integration
    (sbo client is installed 8.81 pl07)
    i have removed the trend micro addin in outlook
    i am using windows ultimate 7 and outlook 10 on the customers pc
    the sbo client is not installed on that pc
    the sql 2008 r2 client is installed
    uac is off
    if you start outlook the sbo addin does not appear
    it is not listed int the commaddins via outlook options addins
    can somebody help
    thanks
    philippe

  • Attachement with Microsoft Outlook integration Add-On

    I am facing a porblem with Outlook Integration add-on. Attachement of the document is not getting attached. The essage is getting delivered but the attachement is not going.
    Patch Level 25.
    Can any one help me out .......
    Thanx in advance.

    Hello CG,
    Is the attachments path correct ? and the necessary rights are given ?
    Please try to do this
    1)Open a document.
    2)Make a Print Preview of the document. Then export this preview
       file as JPG image. ( File->Export To->File->Image ) A JPG file.
    3)Send email for this document and manually attach the JPG file created
      in step 2.
    4)Try to resend the document.
    Can you also check the event viewer/application log to see if there
    are any errors.
    SAP Note 693306 :Error analysis for e-mails and fax sent via Service Manager
    Hope this is helpful,
    regards,
    Willy
    SAP Business One Forum Team

  • Outlook Integration - Case of the missing snapshots

    Hey all,
    Here's the issue:
    SBO 2007A PL 35
    The snapshots are being created on the server, and they showing on the SBO server (say
    SBOHOST).
    I created the snapshots for EN(GB), EN(US), and NL.
    For reference, the actual database is on a dedicated SQL server (
    SQL_SERVER)
    All files are there, and permissions are set so that they can be written.
    I went onto the terminal server (
    TERMINAL) that connects through to the main server database (
    SQLSERVER) and to the SAP files B1_SHR on
    SBOHOST
    The templates were missing in the "Define Snapshot Templates"  under EN(GB), EN(US), and NL.
    I checked the paths, and they are fine so there are no permission issues.
    I then installed, from TERMINAL, the Czech snapshots. They work. I can see them under the "Define Snapshot Templates" on TERMINAL
    ...but not on SBOHOST where I can see the others...
    They are sitting right beside each other in the
    SBOHOST\B1_SHR\Addon\Microsoft Outlook Integration\Templates\[DATABASE]\Default
    I can see CS (Czech), NL (Dutch), EN (Enlish) folders.
    I had a look in the [@BOOSTP] and found if I changed the "host name", in a test database of course, from TERMINAL to SBOHOST they appeared on the respective computers snapshot list under the respective language. Hopefully I haven't lost you.
    Any help with this would be good, as so far all the notes on this tell me to re-create the snapshots, which hasn't helped so far.

    I too am having an issue with creating the default snapshots in B1 2007A PL35 (and BTW PL37)....
    I can successfully create the snapshot on the first B1 client on my network, for every machine thereafter I get the following error when creating templates for English (US).... This message is a pain, when you have many machines and users ask why the create snapshot templates window appears each time they log on.
    This is the Error Message:
    Failed to create template 'Executive customer (by Business Partner)'
    My observations regarding the solution are identical but one of the proposed solutions won't work, at least not as is...
    As you said It looks like it cannot create the entries in the @BOOSTP because of the unique constraint on Index [@BOOSTPBOOSTPI1] which does not include the new field.
    [U_Host] ASC cannot be added to the index because it is of type nvarchar(max), see error below:
    *Column 'U_Host' in table 'dbo.@BOOSTP' is of a type that is invalid for use as a key column in an index.*
    The only way to make this work is to change U_HOST it to a nvarchar(100) and then you would be allowed to add the U_Host to the index.  SAP probably needs to make this decidion, I doubt they would support this work around, so temporarily disabling the index appears to be is the way to go....
    Why isn't SAP testing well before release?  This seems like something that should have been caught.
    Thanks,
    Jason Walters

  • Outlook Integration - Snapshot templates missing when upgrade to 8.8 PL14

    hello all,
    We have a problem when upgrade from B1 8.8 PL10 to PL14, the snapshot template missing. We had no problems to generate snapshots in B1 8.8 PL10.
    All the snapshot templates has been installed on <Servername>\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default
    And in the -GoTo meny- and select -create default templates- could not be started.
    Grateful for all help.

    Hi Jorg,
    I quote a solution for similar case but the solution is based on client PC :
    OI: Failed to create snapshot template in client machine
    Symptom
    You start up Outlook integration Addon in client machine. When you want to create a snapshot template, you get an error that can not create it.
    Other terms
    SAP Business One, Add-on, Outlook integration, OI, snapshot template, Index, Host, U_Host, BOOSTP , failed to create
    Reason and Prerequisites
    The index on user defined table [@BOOSTP] is not right. It does not include column U_Host.
    Solution
    You can run below script to fix it,
    IF EXISTS (SELECT 1 FROM CUFD
    WHERE AliasID = 'Host'
    and TableID = '@BOOSTP')
    BEGIN
    IF EXISTS (SELECT name FROM sys.indexes
    WHERE name = N'@BOOSTPBOOSTPI1')
    DROP INDEX [@BOOSTP].[@BOOSTPBOOSTPI1]
    IF EXISTS (SELECT name FROM sys.indexes
    WHERE name = N'BOOSTPI1')
    DROP INDEX [@BOOSTP].[BOOSTPI1]
    ALTER TABLE [@BOOSTP] ALTER Column U_Host nvarchar(200)
    CREATE INDEX BOOSTPI1
    ON [@BOOSTP](U_TplName, U_Language, U_CatID, U_Host)
    IF NOT EXISTS (SELECT 1 FROM UKD1
    WHERE tableName = N'@BOOSTP' and SubKeyId = 3)
    Insert into UKD1 values('@BOOSTP',0,3,'Host')
    END
    ELSE
    Print 'There is no U_Host column in @BOOSTP table!'
    if the above solution can't solve it, log a message to SAP support.
    JimM

  • Outlook Integration: unable to create snapshot templates.

    Dear all,
    I followed all the steps mentioned in note 861055
    "You can easily repeat the step of template creation after running the server installation:
       1. Start the Addon Outlook Integration from Business one.
       2. Choose/Administration/Outlook Integration/Define Snapshot Templates
       3. Select "Create Default Templates" from the "Goto" menu. This will repeat the procedure that could not be started because of the missing layout files."
    But when I choose "Create Default Templates" nothing happens...
    I'm using SBO 2005A SP01 PL31 and Outlook Integration PL60.
    Also, what's the difference between the OIStandAlone and the OutlookIntegration files?
    Best Regards,
    Vítor
    Message was edited by:
            Vitor Vieira

    Hello,
    This issue is really interesting, I really desperate to install it. I read the note and find out that server installation must be run before initialisation of addon in the client workstation. Initialisation means addon registration. I just think the template will be created in the client workstation if the server installation has run. Both must be run. But here the explanation I've got from pdf file :
    Template Layout Files for Microsoft Outlook Integration Snapshots
    The SAP Business One Add-On Server Installer copies the template layout files for snapshots in the following subfolder in <B1DIR>: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default. However, if the SAP Business One 2005 SP01 application is not a new installation but an upgrade, the name of the subfolder is the same as for SAP Business One 2004.
    In the Default folder, there are language-specific folders for all templates. After you complete the registration of the Microsoft Outlook add-on on your server and begin the initialization in a company database from a client, the add-on creates default templates for the current language of the company to which you are logged on. These default layout files are also stored in <B1DIR> in the following subfolder: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default. When you later use the add-on to create additional default templates (by using the Create Default Templates function of the add-on), your default templates are also stored in: B1_SHR\AddOn\Microsoft Outlook Integration\Templates\<name of company database>\Default.
    However, if the application is unable to locate this folder or the folder cannot be created, a selection window will allow you to select a different location. This path will be stored in the company settings of the Microsoft Outlook Integration add-on and can be changed by you. The default layout files for the company are copied to the Default subfolder of the folder you select.
    The OIStandalone is a standalone installer for the Microsoft Outlook Integration add-on. This tool allows you to install the add-on without having to install the SAP Business One client on your PC. The alternative installer is appropriate for scenarios in which the SAP Business One client is not installed on the same PC as Microsoft Outlook. An example of such a scenario is the use of the Terminal Server for SAP Business One.
    If you have tried, let me know the result.
    Rgds,

  • Outlook integration-Layout files not found

    Hi Experts,
                     I have installed Addon-outlook intgration successfuly and when i start B1 Create default templates popup comes and gives error like
      BO2034: Layout files not found in folder 'C:\Program Files\SAP\SAP Business One Server\B1_SHR\AddOn\Microsoft Outlook  Integration\Templates' i also check path but still gives above error.
    regards
    sudhir

    Hi Sudhir,
    There is a separate part of Outlook Integration that needs to be installed on the server. This includes the templates which get copied to a folder within the B1_SHR. On your SBO DVD or on the latest patch download you are using you should find a folder called Outlook Integration Server in the Packages folder. Run the Setup.exe on the server where the SBO server components are installed and this should correct your problem.
    Kind Regards,
    Owen

  • MS Outlook Integration.

    Hi All,
    I had installed MS Outlook Integration, when i execute from Administration --> Add-ons --> Add-on manager, select the Outlook Integration and click on Start, a window appears with "Create Default Templates" and click on Create, it gives me an error <b>"B02019: Layout file folder 'C:\prgoram files\sap\sap Business One\B1_SHR\AddOn\Microsoft Outlook Integration\Templates"</b>
    Please help me out.

    hi,
       For downloading
    go to
    https://service.sap.com/user-admin
    support Portal
    Download
    download=>Installations and Upgrades =>Search for Installations and Upgrades
    search " SAP Business One Add-On 2005 SP01 "
    download this file
    inside this you will get all the Add-ons
    sandip

  • Layout files of outlook integration

    I have installed addon outlook integration on my pc.I am able to send the mail through outlook.But where are the layout files located ? Every tiime I start the addon it is asking me to Create Default tempate.When I give the folder it gives me error as,
    Layout files not found in folder 'D:\Sap'
    Where are these files located ? On the server or on the client.
    By default it gives me path of the server as,
    mmcpl-sap\B1_SHR\AddOn\Microsoft Outlook Integration\Templates
    mmcpl-sap\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\MMCPL_TRAINING
    These two paths are for
    Source Folder of Default Snapshot Template Files(Server)
    Strorage Path for Snapshot Template Layout files
    mmcpl-sap is the name of server and MMCPL_TRAINING is the name of company.

    Try this:
    https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/download_basket/download.htm?objid=012002523100001869512006D&userid=S0004447420&action=DL_DIRECT
    Otherwise, just go to Download Center, then choose Updates, and download SAP Business One AddOns 2005 SP01.
    Let me know if it works!

  • SAP SBO button doesn't appear in MS Outlook (AddOn Outlook Integration)

    Hi all,
    I have installed AddOn Outlook Integration, and it went smoothly. But on some of my co-workers' computers the SAP Business One button doesn't appear in MS Outlook (usually it appears on the top menu). I thought it was just a matter of display or view. But I can't find it anywhere.
    Can anyone help me why and find the solution??
    Versions:
    SAP BO 2005 A (6.80.320) SP01 PL39
    AddOn Outlook Integration 6.80.01.85
    Microsoft Office Basic Edition 2003
    Thanks
    Andre

    Andre,
    This is from Note 801964.  Please check there for a better format as i just copied it.
    Hope this helps,
    Karl
    There can be several reasons why you don't see the SAP Business One menu of the Add-On "Microsoft Outlook Integration" in your Outlook window. In order to analyze the problem, carry out the following steps in order:
    Close all running instances of Microsoft Outlook. If you installed Release 2004 of Microsoft Outlook Integration, close all instances of Microsoft Word and Microsoft Excel as well. Make sure that there are no running instances left (using the task manager, or, if possible, reboot the system). Restart Outlook and check if the menu is shown. Keep in mind that the menu appears only in one running instance of MS Outlook.
    If you use MS Outlook 2002 or higher, from the main menu select "Help"->"About Microsoft Outlook"->Disabled Items...". If the SAP Business One add-on is listed here, enable it and restart Outlook (again after closing all instances of MS Office products).
    From the MS Outlook main menu choose "Tools"->"Options" and select Tab "Other". Press button "Advanced Options". On the form opening press "COM Add-Ins". If you find the addon listed there, enable it. Again close all Office instances and restart Outlook.
    In case you still don't see the menu, choose "Help"->"Detect and Repair". After the repair procedure completed, repeat the previous step.
    Should the problem persist, check your installation of the Add-On:
    The file "BO_SyncExt.exe" must exist on your machine.
    Open your registry running the command "regedit" and check if there's a registry entry "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\ Addins\BO_SyncExt.BO_AddIn". "LoadBehavior" must be set to value "3", if it's not, change the value accordingly and restart Outlook.
    Should the file or registry entry be missing, reinstall the add-on.
    Especially if you upgraded from a previous version of Microsoft Outlook Integration, it might be helpful to repair your MS Office installation from the system's control panel.

  • Outlook Integration Toolbar missing from MS Word and Excel

    Hi Everyone
    I have previously had to uninstall Outlook Integration  due to MS Excel not showing the SBO menu and MS Word not allowing me to Log On to SBO using the Business One menu inside WORD.
    However now that i have re-installed the add-on (which went through successfully) the toolbar is now not appearing in MS Word aswell as Excel!! (but it does appear in MS Outlook and i can log in and synchronise etc from Outlook
    Has anyone else come across this or could suggest a possible solution
    Thanks
    Asma
    Message was edited by:
            Marc Riar

    Hello,
    try to read belows:
    Microsoft Outlook Integration
    1. You have installed the following on your workstation:
    • Microsoft® Outlook (supported versions: 2000 SR1 (and higher), 2002, 2003)
    • Microsoft® Word (supported versions: 2000 SR1 (and higher), 2002, 2003)
    • Microsoft® Excel (supported versions: 2000 SR1 (and higher), 2002, 2003)
    2. After installing Microsoft Outlook, you have created an e-mail account so that you can send and receive e-mails.
    3. Microsoft Outlook is set as your default mail client. To check your default mail client, on the Microsoft Windows taskbar, choose Start → Settings → Control Panel → Internet Options. On the Programs tab, Microsoft Outlook should be selected in the E-mail field.
    4. You have administrator privileges for the SAP Business One server and have used the SAP Business One Add-On Server Installer to install default snapshot templates on the server as follows:
    a. Put the CD for add-ons in the CD-ROM drive of your SAP Business One server.
    b. Open the SAP Business One add-on server directory. Double-click setup.exe.
    c. In the first window of the InstallShield Wizard, choose Next.
    d. In the Choose Destination Location window, choose Browse to select the installation folder. Then choose Next.
    e. Follow the instructions in the Start Copying Files window.
    f. In the InstallShield Wizard Complete window, choose Finish.
    5. Before you begin add-on registration, you have closed these programs on your workstation:
    • Microsoft Outlook
    • Microsoft Word
    • Microsoft Excel
    Another is that have you correctly installed standalone installer ?
    Rgds,

  • SAP Workflow integrated with Microsoft Outlook

    Hello All,
    I have the following question. When an work item comes in the SBWP inbox, as soon as the work item is executed by the user
    the workitem disappears from the SBWP. Now my question is if SAP Workflow is integrated with Microsoft Outlook (so that email containing the work item as a link reaches Outlook), is there a way to make the email disappear from the Outlook as soon as the SAP work item is completed.
    Can someone throw some light on the same.
    Thanks,
    Sachin

    Hi,
    Duet workflow scenario is available. SAP Application sends workitem to Duet Server and Outlook client has Duet add-in. You need Duet Server and user license.
    Also SAP MAPI Service Provider is available. You can access SAP Inbox items from your outlook client. I think SAP MAPI Service provider is free.
    Regards,
    Masa

  • BE3000 Integration with Microsoft Outlook

    Dear all,
    Kindly need your help. I've question about Integration between BE3000 and Microsoft Outlook. Actually my customer ask me whether they can call people on the conctact list (in outlook) directly from Microsoft Outlook. Is it possible to do that on BE3000? Because as far as I know it will need presence server that connected (siptrunk) with call manager.
    Thank You,
    Best Regards,
    Nanda Nurhadyan       

    Hi sanjay,
    Thankyou very much sanjay, You're correct. Now I can using click to call widget in outlook also in word.
    But the problem is after I click the number the pop-up appear ask me about certificate. (Image attached)
    I've try to install that certificate to Trusted root certification authorities but there's no change and still appear that pop-up. Do you know how can I resolve this problem?
    Actually now I'm not using precense server in my client. I'm only using BE3000 with SPA8800 as a voice gateway.
    Best Regards,
    Nanda Nurhadyan

  • Integration Of Microsoft OutLook In Enterprise Portal.

    Hi,
    Any one help me out by providing the step by step document regarding how to integrate Microsoft Outlook/gmail or yahoo or hotmail into portal.
    With Best Regards,
    Sri Krishna.

    Please refer this link:
    http://help.sap.com/saphelp_nw70/helpdata/en/cf/a3813ec8d3fe3ee10000000a114084/frameset.htm
    You can also refer following links:
    Outlook integration with EP 6.0 SP9
    /thread/40895 [original link is broken]
    check the below pdf for webaccess integration into portal
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92f5bcdd-0701-0010-188f-93cc435a6e05
    Raghu

Maybe you are looking for