Microsoft Server 2003 / PEAP / WLC 2106

Has anyone ever had a certificate vanishing issue on an M$ Server 2003? For some strange reason the certificate under my IAS RAS policy keeps disappearing after an undetermined amount of time? The server is the only DC / CA root / IAS in the forest. I'm not sure why the self-signed cert. will not remain in the cert. store?
Current config.:
(2) WLC 2106 (both RADIUS clients on DC/IAS)
(5) 1141 LAPs
Authentication: PEAP/MS-CHAPv2
Encryption: TKIP/AES
Any ideas? Thanks.

In 4.1, disabling DHCP proxy did just that, it disabled the "proxy". If you ever look at your dhcp lease of a wireless client, it comes from a dhcp server of 1.1.1.1 (virtual IP of the controller). With proxy disabled, the address will no longer be masked.
In 4.2 and beyond, disabling dhcp proxy actually disables the DHCP Relay that is the process of the controller sending the dhcp requests to a specified server.
So if in 4.1, you had "dhcp proxy" disabled, in 4.2 and beyond, you are actually disabling the relay as well.
If this is indeed the case, enable dhcp proxy, or add an IP Helper adress to your router for this vlan, just like you would normally do for Wired clients.

Similar Messages

Can JDK1.3.1_16 be installed on Microsoft Server 2003, Standard Edition?

Hello,
I installed SDK1.3.1 update 16 on a computer with the operating system Microsoft Server 2003, Standard Edition.
The JAVA_HOME variable was NOT automatically created as part of the installation. So I created it myself.
I installed a voice recognition browser afterwards (that requires JDK1.3.1 update 06 or later) and it could not detect that the appropriate JDK had been installed and/or the JAVA_HOME variable had been set correctly.
Is it normal for the JAVA_HOME variable to not be created automatically? If this is not normal, what could be the problem and how can I rectify it? Again I need a version of JDK 1.3.1 for the browser to work.
Thanks,
Bonnie

Hi Bonnie
Maybe a bit late to comment, but for the record...
I just tried to install JDK1.3.1 on a Windows Server 2003 Standard Edition SP1 (version 5.2.3790) server.
I initially tried to install 1.3.1_13, but java -version failed quietly with following error in eventvwr logs:
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The application, C:\jdk1.3.1_13\jre\bin\java.exe, generated an application error The error occurred on 03/30/2006 @ 08:47:35.425 The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)I tried uninstalling and reinstalling JDK from Add|Remove Programs, but without success.
I then tried 1.3.1_8 and it worked fine first time.
I then tried 1.3.1_12 and it failed with this eventvwr message
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)The 1.3.1 documentation that I've read doesn't explicitly mention support for Server 2003.
In contrast, 1.4 explicitly supports Server 2003.
Regards
Matthew

Microsoft server 2003 standard edition r2 x64 bit product shows invalid product.

Dear all,
I am facing a problem, to register Microsoft server 2003 standard edition r2 x64 bit. My product key is ok. But on time of registration this product it will not accept my key or on Microsoft product registration support it's show its a invalid product.
Please help me to register this product.
Thanks
Puneet

You need to contact Microsoft's Activation Center and talk to someone. The phone numbers for reaching them are on the activation page you go through when trying to activate manually. Apparently the activation code you have is not 'ok', and only
Microsoft can help you with that.
A second thought is where did you get the media? If not from a reputable Microsoft source, then it could be the copy you have is a pirated copy with a key that Microsoft has deactivated. Again, only Microsoft can tell you.
.:|:.:|:. tim

Oracle 10g 64-bit (Microsoft Server 2003 64-bit) showing as 32-bit

Hi there,
This is my first post so go easy with me!
I have built a Oracle 10g 64-bit Standard Edition DB (10.2.0.1) on Microsoft Windows Server 2003 64-bit Standard edition, all is fine, except when I go in to the Host configuration through OEM it seems to think the host system is 32-bit Server 2003 (Microsoft Windows Server 2003 Server 5.2 Service Pack 2 (32-bit)) when it most definietely isn't.
The problem that this seems to cause is that it says the memory size is 4092MB, rather than the 16Gb that is present on the Server, meaning that the Performance Analysis alerts shows "Significant virtual memory paging was detected on the host operating system."
The PROCESSOR_IDENTIFIER correctly states it has a System Environment EM64T Family 15 Model 6 Stepping 8, GenuineIntel (2 x physical dual-core Xeon processors).
Exiting out through sqlplus shows "Disconnected from Oracle Database 10g Release 10.2.0.1.0 - 64bit Production" so it definitely is the correct version!
I can't see any problems anywhere, I am going to install the latest service pack for Oracle (The operating system is patched up and upto date) to see if this makes any difference, but as this is a standard straight forward install I'm now very confused, and thought I would ask here incase anyone else has had this problem, or anyone has any ideas!?
Thanks in advance,
Robbie

Hi,
Sorry for not getting back sooner with a reply!
Since the 10.2.0.3 patch, our Oracle usage is now up at 8gb so doesn't sound like we are having the same problem as yourself, although we are getting the same message "Significant virtual memory paging was detected on the host operating system." like yourself but with no recommendations, although I can't see what the problem is now causing this, and doesn't appear to be causing any actual problems. Are you still having your 4gb limitation problem?
Does anyone else have this problem with Oracle 10.2.0.3 64-bit on Windows Server 2003 64-bit platforms? I'm waiting for someone to say 10.2.0.4 will fix this!
Thanks,
Robbie

One Microsoft Server 2003 R2 (small business server) doesn't connect to Context Directory Agent

I have 2 DC's and I'm trying to get the cda to connect to both dc's. Both are 2003 R2 but the one I'm having trouble with is Small Business Server. I've double checked security settings and firewalls, but I'm still receiving the error on one server only.
All help is appreciated.
The error I'm getting is:
Log attributes
wmi-property
exception-stack
org.jinterop.dcom.core.JIComServer.init(JIComServer.java:576)
org.jinterop.dcom.core.JIComServer.initialise(JIComServer.java:481)
org.jinterop.dcom.core.JIComServer.<init>(JIComServer.java:445)
com.cisco.cda.rt.adobserver.adobserver.jinteropUtil.getWmiLocator(jinteropUtil.java:42)
com.cisco.cda.rt.adobserver.adobserver.EventsThread.QueryWMIProperty(EventsThread.java:81)
com.cisco.cda.rt.adobserver.adobserver.EventsThread.getNetBIOS(EventsThread.java:169)
com.cisco.cda.rt.adobserver.adobserver.EventsThread.extractDCData(EventsThread.java:201)
com.cisco.cda.rt.adobserver.adobserver.EventsThread.run(EventsThread.java:605)
dc-hostname
email.houstonarmature.local/192.168.1.1
dc-name
Email
exception-cause
java.io.IOException: Socket Closed
wmi-class
Win32_NTDomain
exception-message
An internal error occurred. [0x8001FFFF]
wmi-property
DomainName
dc-username
hawadmin

Hi Toby,
Just an addition. Did you use an administrator account to logon the RWA and then connect to the remote computer?
Did encounter the same issue?
Meanwhile, please refer to following threads and check if can help you.
RD
Gateway - Unable to connect via IP (Netbios, FQDN work fine)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Service Pack 2 for Windows Server 2003 broke our online connection to our self-hosted website

We have two office computers with Microsoft Server 2003. On one of these machines, we have hosted our own website for about 10 years. Eveything worked well until yesterday night, when Microsoft upgraded our webhost machine with Service Pack 2. When
it was done, the only noticeable result is that we lost an internet connection to our own website. We had upgraded our other office server with Service Pack 2 a number of years ago, but that had no negative effect on our operations.
Our website, originally created with ASP.Net in Visual Studio 2005, is a relatively simple one, almost all text-based, with a default.htm home page which comes up on any browser, and from which users can use click buttons to move to secondary
pages. Now, following the Service Pack 2 downloading last night, all that shows up on a browser screen when someone seeks our website is a bold-face "FOLDER LISTING../" message.
We under standard there is a program feature that directs a website visitor directly to the home page of that website.
So what is that program feature? Where do we find it? How do we reconstruct it or modify it so that our website default.htm home page appears on the screen?
We intend to upgrade our two office servers to Microsoft Server 2012 within a few months. But we would be most unhappy to be told that we must pay a tech consultant a hefty service charge to restore or repair a vital link that Microsoft's
operating system service pack destroyed, even if inadvertantly.

You should be able to configure that on IIS level. See that: http://www.iis.net/configreference/system.webserver/defaultdocument
More if you ask them here: http://forums.iis.net/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Microsoft server installed for trainng purposes

Hello,
I have 3-4 computers in my home and one of those is an old Dell dimension 3000 (windows XP).
I have recently learned the basics about Microsoft server 2003 and I was thinking to install a copy in my old Dell. The goal is to create a real life environment and train myself in working as administrator with Microsoft server 2003. I know it is
almost obsolete now (as well as XP ) but it is better than nothing.
My questions are:
1) Is my plan realistic? Is it possible to do this? Am i going to gain experience in working with Microsoft server?
2) I meet the basic requirements for installing Microsoft server but is there something else i WILL NEED besides the copy of the Microsoft server 2003? In other words, am I going to be able to connect some of the computers (or all) and create roles, accounts,
group policies etc?
I hope my questions make sense....

Sorry, a force of habbit caused me to mistype above. Windows 2008 "R2" is 64-bit only. Try with Windows 2008 SP2, which comes in both varieties. Once you do this, open device manager to see if you need to get any further drivers. BTW,
Windows 2008 SP2 drivers are essentially the same as vista drivers, if you need to download anything from the dell web site.
Mike Crowley | MVP
My Blog --
Planet Technologies

Error while installing SAP b1 9.0 PL4 on Microsoft Windows server 2003 SP 2.

Hi all,
I am trying to install SAP b1 9.0 Pl 4 on Microsoft Windows Small Business Server 2003 SP 2 (32 bit). Server tools and server was successfully installed, now facing an issue while I m running the Client from package folder below is the screen shot for error. Please help ASAP.
Thanks all
Sonil

Hi,
Yes, 9.0 version will not support above server. Please check below guide:
http://www.abbasoft.com/images/Hardware_software_requirements.pdf
Thanks & Regards,
Nagarajan

Microsoft Exchange Server 2003 and Windows 8 Compatibility

Is there a fix or workaround for accessing email via Outlook 2013 (Windows 8) when your company uses Microsoft exchange server 2003 and has not plans on upgrading it any time soon. I am a remote employee so I am the only one that has this problem in the
company. I can access email through an owa account but it's a pain. I tried to set up a rule to have all incoming mail forwarded to my gmail account in Outlook 2013, but that did not work. Any other ideas?

If server has enabled ActiveSync you can use Windows 8 Mail Client - works almost like Outlook.
AFAIR Outlook 2013 can't work with Exchange 2003.
Regards, Konrad Sagala, MCT, MCSE+M, MCITP: Exchange 2007/2010, Lync 2010, Office365, Windows 2008, Virtualization

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Acrobat 9 does not install after Microsoft ODBC Setup on windows server 2003

I recently downloaded Acrobat Reader 9 from Adobe website. The package was consisted of one file AdbeRdr90_en_US.exe with an appx. size of 33.4MB. When i double click this file Microsoft ODBC Setup is started instead of Adobe Acrobat Reader 9 setup. I clicked next and in the end receive ODBC has been successfully installed and after that Acrobat Reader 9 setup is never started. Tried several times but the same thing and unable to install the reader on this windwos server 2003+sp1.
Can anybody help me to resolve this problem?
ishqi92

Probably need to ask in the Reader forum, this is not it. The Reader forum link is listed at the top of this forum.

Error detected by export DLL. Microsoft Windows Small Business Server 2003 SP 1

Post Author: craig.engelbrecht
CA Forum: .NET
I have an Excel report that stopped working on a live environment a couple months ago.When I run the report I get the error 'Error detected by export DLL'.The server is running Microsoft Windows Small Business Server, Service Pack 1 and is using Crystal Reports 9.I am unable to replicate this error on other environments running the same configuration.I tried installing 'crnet11win_en.exe', even though this was a fix for Windows Server 2003 SP2, still no luck. Does anyone have any ideas on what is causing this and how it can be fixed?? Thanks,Craig

Thanks Ludek
We found the issue after doing control tests, here.
We found that our crystal viewer, developed in .NET 2003, does not work with XP SP3, even with the fix crnet11win_en.exe.
Our control test, was:
Ran report with XP SP2, exported ok
Upgraded pc to XP SP3, then ran report again, Report failed to export, with error message as described.
Had a crystal viewer set for using .NET 2005 files, but not yet ready for deployment to users, tested and was able to export to excel using .NET 2005 with XP SP3.
The issue seems to relate to exportmodeller.dll, which was the issue in the past when XP was upgraded and stopped the export function from working before.

WLC 2106 and Microsoft IAS and Windows XP Supplicant

For one of my SSID's I am using 802.1x with WPA2/AES. I have configured IAS on windows server 2003 and from the server message logs I am able to authenticate a user. I never complete the authentication through the eyes of the WLC though. In using debug commands on the WLC I can see an error that I can not solve.
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Received EAPOL-Key from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Stopping retransmission timer for mobile 00:23:4e:70:a9:97
I suspect my issues revolves around the message: Ignoring invalid EAPOL version (1) in EAPOL-key message
Anyone have any idea or insight on additional debug steps that can be taken?
Regards,
Justin

ERD Commander (ERD 5.0) is the version that supports Windows XP. The next version is DaRT Supported Vista and later

Which oracle software is suitable for Microsoft windows server 2003

Hi,
I'm suppose to install oracle 9i,10g on the system which i mentioned below.
Which oracle software is suitable for the system?
System:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Computer:
Intel(R) Xenon CPU
E5335 @ 2.00Ghz
2.00Ghz, 2.00Gb of RAM
Waiting for your suggestion.
Thanks, Muhammed.

Thanks for your quick response.
As you said v11 can be installed and
Could you please say about the bit (32 or 64bit)? which oracle binaries i can download
because my system configuration is server 2003 - 64 is bit xeon process.
Many Thanks,
Muhammed

Problem of isFile on Microsoft Windows Server 2003

Dear all,
Thanx all for your support in case of previous questions...
Right now we are facing issue with isFile method of java.io.File class.....
On windows xp and unix machine it is returning true for files....but on one machine at client side it is returning false...
Please find os and jre details of same machine..
OS - Microsoft Windows Server 2003 ( Enterprise Edition - Service Pack 2 )
Java Version - JRE6 ( SUN MICROSYSTEMS, INC)
Main issue is same is working on other machines....
using filefilter....
it is returning false on .......if(tempFile.isFile())...statement......PLZ help me...is there any OS related dependency....
package com.hth.filter;
import static com.hth.vars.IbankVars.*;
import java.io.File;
import java.io.FilenameFilter;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class FilesFilter implements FilenameFilter {
     private static Pattern p = Pattern.compile(FILES_PATTERN_TO_BE_EXCLUDED);
     private File tempFile=null;
     private static String fileSeparator=null;
     private static String excludeExtensionList="";
     private int corporateId =-1;
     public FilesFilter(int corporateId){
          this.corporateId=corporateId;
     static{
          try{
               fileSeparator=System.getProperty("file.separator");
          }catch(Exception e){
               fileSeparator="\\";
               e.printStackTrace(System.out);
     public boolean accept(File folder, String fileName) {
          // TODO Auto-generated method stub
          Matcher m = p.matcher(fileName);
     if(m.find()){
          return false;
     }else{
          tempFile=new File(folder,fileName);
               if(tempFile.isFile())
                    System.out.println("FilesFilter-fileName:"+fileName+"IS FILE");
                    //if(fileName !=null && fileName.indexOf(UNDERSCORE)!=-1){
                         /*     if(fileName.substring(0,fileName.indexOf(UNDERSCORE)).equalsIgnoreCase(String.valueOf(corporateId)))
                              if(fileName.lastIndexOf(DOT)!=-1)
                                   StringBuffer strFileExt =new StringBuffer(COMMA);
                                   strFileExt.append(fileName.substring(fileName.substring(0,fileName.lastIndexOf(DOT)).length()+1,fileName.length()));
                                   strFileExt.append(COMMA);
                                   if(excludeExtensionList.toLowerCase().indexOf(strFileExt.toString().toLowerCase()) != -1){
                                        //file extenstion is configured in property file for exclusion.Hence return false;
                                        return false;
                                   }else{
                                        //file extenstion is not configured in property file for exclusion.Hence return true;
                                        return true;
                              }else{
                                   return false;
                         /*}else
                              return false;
                    }else{
                         return false;
               }else{
                    System.out.println("FilesFilter-fileName:"+fileName+"IS FOLDER");
                    return false;
     public static void setExcludeExtensionList(String excludeExtensionList) {
          if(excludeExtensionList!=null)
               FilesFilter.excludeExtensionList = COMMA+excludeExtensionList+COMMA;
}

Right now we are facing issue with isFile method of java.io.File class.....
On windows xp and unix machine it is returning true for files....but on one machine at client side it is returning false...So it's a directory not a file.
Next time please use the CODE button above to format your code.

Microsoft Server 2003 / PEAP / WLC 2106

Similar Messages

Maybe you are looking for