Microsoft Updates after Windows 7 Deployment using MDT 2010 Update 1
Hello,
After I deploy Windows 7 using MDT 2010 Update 1, i'm prompted to download and install updates. Updates which were installed prior to the capture process. During the capture process, does something reset Windows Update and makes it think the updates were
not installed?
My process of building a custom image is as follows:
1. PXE boot and kick-off a build task sequence (install OS + drivers + soe applications). (protectmypc = 3 in unattend.xml)
2. Download and install all Microsoft Updates, configure the OS, configure third-party applications.
3. Map a network drive to my deployment share, run litetouch.vbs and kick-off a capture task sequence.
4. PXE boot and kick-off a deployment task sequence. (copy profile = true, protectmypc = 1 in unattend.xml)
I'm getting updates but they are new updates. We have updates turned off through Group Policy and after an image is deployed it is attempting to install updates which should not be installed through Windows. I also have the protectmypc setting set to 3
and have updates turned off before capture. Something is searching for updates and during the deployment process and I need to find out how to stop this from happening. Someone has to know where these updates are coming from.
Joseph N. Sunderman | IT Professional
Similar Messages
-
I am deploying Windows 7X64 on Dell OptiPlex 990 and other desktops. Deployment goes fine but the Synaptics pointing device driver gets installed after the deployment is complete. Also after applying operating system I get a prompt to Run the Synaptics Pointing
Driver setup twice. If I don't click yes to install the TS wont proceed. Its gets worse when I uninstall the Synaptics Device Driver from Appwiz.Cpl and reboot the machine the Keyboard fails with the error Code:29. Above is the screenshot of what I get after
Applying Operating System step. Thanks in Advance.I have also encountered this in MDT 2013 Lite Touch deployments for Windows 8.1 and I am researching it.
I noted that the Synaptics driver was installed for "SmBus" in Device Manager for a motherboard with an Intel 7 Cxxx Series chipset (Dell Optiplex desktop). The HardwareID's are all PCI\VEN8086...
We use %Model% in our task sequence and have a folder for each model such as "Optiplex 7010" in Out-of-Box Drivers. -
Failed to install drivers in Windows Vista using MDT 2012 update 1
I am trying to deploy physical machine with Windows vista along with drivers. After completion of deployment i see deployment is successful with no error and warnings, but it still do not install driver in the machine. To test weather i have selected correct
driver i checked manual installation of drivers and this install the driver in the machine. But the drivers are not installing when i am tried to install driver using MDT. In windows 7 and Windows XP drivers are installed correctly but not in Windows Vista.
I have shared my log files in one drive. Please look this and tell what mistake i am doing.
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!107
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!109
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!108
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!110
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!112
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!111
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!114
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!113Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Windows 7 Embedded & MDT 2010 Update 1
Hi,
Is it possible to deploy Win 7 Embedded with MDT 2010 U1 ? Is it supported by MS ?
Thanks,
Regards.Hi,
Yes you can. Please see this video
Deploying Windows Embedded Standard 7 with Style
regards,
Blog Microsoft |
Déployer Windows 7 |
Améliorer les performances de Windows 7 -
Help with Windows 8.1 Update 1 Offline Deployment using MDT 2013
Hi guys,
Hoping that someone has encountered this problem and that there is a simple solution that I am overlooking. Essentially the problem we seem to be having is that after the OS is installed the process of updating the boot partition incorrectly updates
the boot partition on the offline media, rather than on the local disk. Because UEFI requires boot media to be formatted FAT32 and our deployment is a little on the heavy side (upwards of 40GB) we are generating multi-partition boot media and
this seems to be creating a problem, our previous Windows 7 offline media (single NTFS partition) worked perfectly.
By looking at the BDD.log I can see where it appears to examine the potential boot partitions, finds the local disk boot partition and the external usb hdd boot partition and chooses to write to the external. The task sequence restarts the machine shortly
thereafter at which point the device cannot boot with an error "No operating system found."
Thank you in advance for any assistance.Hello Erik,
it seems to be a bug in MDT.
The routine in ZTIDiskUtility.vbs is looking for the last available boot device:
For each oWMIDiskPart in AllDiskPartEx ( " WHERE Bootable = TRUE or BootPartition = TRUE " )
oLogging.CreateEntry "Found bootable drive: " & oWMIDiskPart.Path_ , logTypeVerbose
set oDiskPart = new ZTIDiskPartition
set oDiskPart.DiskPart = oWMIDiskPart
set oDisk = oDiskPart.GetDiskObject
If oDisk.isOSReady( sOSBuild ) then
set oLogical = oDiskPart.oWMIDrive( bForced )
If isValidObject(oLogical) then
If not bBootFiles then
oLogging.CreateEntry "Found bootable drive (No Boot File Test) [ " & oLogical.DeviceID & " ]: " & oLogical.Path_ , logTypeInfo
set GetBootDriveEx = oDiskPart
' My change
Exit For
ElseIf oFSO.FileExists( oLogical.DeviceID & "\ntldr" ) or oFSO.FileExists( oLogical.DeviceID & "\bootmgr" ) or oFSO.FileExists( oLogical.DeviceID & "\EFI\Microsoft\Boot\bootmgr.efi" ) then
oLogging.CreateEntry "Found bootable drive [ " & oLogical.DeviceID & " ]: " & oLogical.Path_ , logTypeInfo
set GetBootDriveEx = oDiskPart
Else
oLogging.CreateEntry "No boot files found: " & oLogical.Path_ , logTypeInfo
End if
End if
End if
next
I implemented an "Exit For", so you will get the first possible boot drive. -
Deploy windows8 with custom partition using MDT 2012 update 1
Hi,
I am deploying windows 8 using MDT 2012 update 1 on SCCM 2012. I want C drive (to be quick format using task sequence) and D drive (remains same) on new system. While using diskpart , my D drive always get format . Can anyone suggest the steps.
Regards
ManishHi,
You could try steps in the following blog.
http://arnavsharma.net/4/post/2014/02/mdtformatting-only-c-drive-during-upgrade.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How can i using MDT 2010 to deploy multiple partitions Windows 7 image?
Hello,
I am planning using MDT as a deploy windows 7 solutions. My Windows 7 is setup on parition 1 "C:" and users profile on parition 2 "D". I am already capture WIM for each paritions. How can i using MDT 2010 to deploy multiple partitions for Windows 7
image? together
ThanksHaving the users folder on a separate partitions is a bad idea because the Windows Setup was not really designed for it, it's more of a afterfix. In addition to that the deployment solutions in general have problem dealing with multiple partions.
Put it this way - The big warning text in the WAIK documentation about redirecting the users folder to another drive is there for a reason. It will break future offline servicing.
It doesn't mean it can't be done, it just means it will take you three times (at least) longer to setup/troubleshoot your deployment solution, and you will be in a world of pain the next time you want to re-image the machine.
This quote from a good friend of mine (Andreas Hammarskjold) describes it very well:
Generally I would always recommend to only have ONE partition these days. Going down the route of making multiple partitions is like having multiple wives/girlfriends/lovers… it’s all fun and games for a while but ends with disaster
- Andreas H.
/ Johan
Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch -
Unexpected restarts when deploying Windows 7 and Office 2010 updates
Hi
I am deploying Windows 7 and Office 2010 updates via SCCM 2012 sp1 and have a couple of questions
Question 1)
The updates are made available to clients at 9am on a Tuesday morning. The users get notification that updates are available to install. If the user doesn't install the updates, the client will wait 24hrs and then install the updates automatically.
We have set the restart behaviour to 24hrs, so again, the user will get a pop up saying that their machine will restart in 24hours. In my testing I have seen no more pop ups appear until 15 minutes before a restart is due and then a window appears
with a count down of 15 minutes but I think this might be standard behaviour. I am not sure why there are options in the client settings to remind users frequently about the impending installation of update but not of impending restarts. The
reason we delay the restart by 24hrs is to give the users the chance to restart their machines over night. Is there a way of providing more notifications of computer restarts ? The User Experience in the deployment of the updates is set to
Display in software center and show all notifications. We have Group Policy set to Not Configured for Windows Updates apart from the user policy
Remove Access To All Windows Update Features which is set to 0 - Do not show any notifications.
Question 2)
Another issue we have is that we have client machines restarting without any warning at all. I have tested setting the user experience to suppress restarts but have the issue regardless. It appears that this happens if the client
is off when the deployment schedule reaches its deadline and the restart time is missed. I had one user who did restart her machine because she was prompted to restart. When the machine came back up it looked like it installed another update and
then just resarted without any warning. This hasn't happened often but a one user was on a Lync call when the restart occured and she was not happy.
Any help would be much appreciated.
ThanksHi Daniel
I have done an RSOP on a VM I am testing and only have the user policy :
Remove Access To All Windows Update Features which is set to
0 - Do not show any notifications.
And the machine policy :
Specify intranet Microsoft update service location which is set to
Enabled The GPO Name is Local Group Policy
The policies look OK.
As a test I have deployed some updates and set the user experience to
Display all notifications and set the Suppress restarts
for both Servers and Workstations. When I deploy the updates, I get notifications that the updates are installing (when the deadline is met) and then I get a prompt telling me that a restart is required. I also get a windo letting me restart now
or I can ask to be reminded in x number of hours. This seems like expected behaviour. It does not force a restart. However if I leave the VM on over night I come in the following day and can see it has restarted. looking at the WindowsUpdate.log I
can see that at 3:15am the line AUInvoking reboot system. It looks like Windows Updates and not SCCM is forcing the restart.
Thanks -
Remove Persistent Network Drive Z:\MDTLogs$ after Complete Deployment through MDT
Hi
I just completed my Windows 7 Deployment using MDT 2013. I use a Light Touch installation. After completing i log into my computer, everything looks
fine. But I have a persistent Network Drive Z:\MDTLogs$(Shared folder for MDT Logs on MDT Server). I don't want permanently have this Network Drive mapped.
Is there an way to disable this in the Deployment Workbench or similar?
CS.ini for MDT Logs location on MDT server
SLShare=\\192.168.1.10\MDTLogs$\%ComputerName%
SLShareDynamicLogging=\\192.168.1.10\MDTLogs$\%ComputerName%
Shailendra DevHi,
LTICleanup is supposed to remove mapped drive at the end of a deployment.
Check what the logs say in C:\windows\temp\deployment logs\
You can also try to add to your customsettings.ini file the variable FinishAction=Restart
Other problem could be a remaining of the default profile, check this post: http://social.technet.microsoft.com/Forums/en-US/b6e79f90-241c-4878-81c5-bc1800004f1b/mdt-copyprofile-and-network-drive?forum=mdt#0d21ff7a-d346-42bc-883e-be67cbefbb84 -
Error while trying to deploy 32 bit windows 7 using mdt
I am trying to deploy 32 bit windows 7 on a 64 bit machine using MDT. After the initial loading it gives an error stating that windows failed to start.
File:\Windows\system32\drivers\stm_tpm.sys
status: 0xc000035a
info: windows failed to load because a critical system driver is missing or corrupt.
I tried disabling the drivers .. still seeing the same error.
STMicroelectronics System tpmdrv.inf 1.00.04.14
STMicroelectronics System tpmdrv.inf 1.00.04.15(1)
STMicroelectronics System tpmdrv.inf 1.00.04.15(2)
Can some one help me out..thank you very muchIf you are still getting the same error, then it would suggest that the drivers weren't removed from the image.
IF this is the WInPE image generated by MDT, then be sure that you run a *Full* update of the deployment share.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Windows Vista is not installing using MDT 2012 update 1
I have created a media using selection profile in MDT 2012 update 1, but it is not deploying my physical machine. I get error message that Windows Cannot copy files required for installation. Make Sure all files required for installations are available.
However i have successfully deployed Windows & and Windows XP with MDT 2012.
I also used different iso image of vista but still i get same error message.Looks like you have a *NEW* issue that is unrelated to this thread. Generally I recommend that you open a new thread.
How to Debug missing Drivers in MDT Litetouch
I see that you say there are *Problems* but you don't list which devices or drivers are missing.
From your Bdd.log file I can see that the following drivers are getting copied locally:
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6" "C:\Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315" "C:\Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A" "C:\Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9" "C:\Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4" "C:\Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4"
However I can't tell what the problem is.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
How to Install ATI drivers and apps using MDT 2010
Hi, I am a greenhand for the Windows7 deployment via MDT.
I am currently facing an issue, I downloaded the ATI drivers from Dell Offical website (I am using Dell laptop), they I extracted the driver files using the 7zip, then imported the files to the MDT Out-of-box drivers, but this could only import the driver files,
for the application, MDT couldnot import.
Is there anyway to import the both Drivers and App of the ATI together to MDT, thus when deploying the windows, the drivers and app of ATI can be installed along with the Windows OS.
Appreciate your comments/suggestions. thanks in advance.
EthanHi,
what
is the
format installation
dirvers
ATI
and you can
try to import these
drivers
as applications mode
FETHI_ABASSI -
Each time I reboot my computer, Firefox 18 will be working in the background after I double click the icon. It does not show up in the task manager. If I double click the icon several times some minutes later, it will finally open up all the windows. The first window will say that an update was unsuccessfully loaded, and it will try again. When that fails, then I close that window and I am good until I reboot again.
I have already tried resetting to default. I also completely uninstalled it with all my personal settings and then reinstalled it.
The trouble remains.Hey i have this problem on my laptop. Its a very annoying but usually these solution fixes it http://mzl.la/Mqh7m3.
-
Lenovo Solution Center does not sense or allow Windows Update after Windows 10 upgrade
Also see: https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-and/Lenovo-Solution-Center-says-Windows-Update-needed-Windows-10/m-p/2136161#M6832 I'm having exactly the same issue as the user who started the thread linked above. After installing Windows 10 (and having no particular issues with the installation), LSC won't leave me alone about needing to run Windows Update. But when I click the Launch button provided, nothing happens. LSC is also recommending I update drivers and things, but the link provided to the Lenovo website also doesn't work. I had to run Windows Update and find the updated drivers on the Lenovo site myself. I happen to have a G505s, but the issue is obviously not restricted to one model.
Maybe a Lenovo server is down. Check again later or tomorrow.
Of course it might be that your firewall or other protection software is blocking the application from communicating with the Lenovo server...
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Windows 8 has been running very well after installing it with bootcamp and its latest drivers.
I just have never updated Windows 8 itself, (windows has never checked for updates), and just has been
using it bare. Do you update windows 8 to the latest updates with windows 8, and have any problems
with the updates? Just curious before I start updating it for once.You have to update Windows to the latest version with Windows Update and keep it updated, because this is a matter of security. Microsoft provides a lot of security updates and you have to install them even if you have got an antivirus. Then you can find other updates, and if you want to install Windows 8.1, just install all updates with Windows Update, and then go to the Windows Store and download Windows 8.1.
Apple says that Windows 8.1 is not supported by Boot Camp, but people say it works without any problem with the most recent drivers, so I do not find any risk after upgrading to Windows 8.1.
Maybe you are looking for
-
Creating a master-detail relation between a view and a table
Hi all, I have a problem with creating a master-detail relation between a database-view with lots of customer data and a small table with per customer a list of entities of our companies who may work for that customer. Somehow I seem to be unable to
-
System Landscape in EP6.0 SP9 (Urgent ..)
Hi, We have installed EP6.0 SP9 on Win 2003 and Oracle. After instalaltion I Created the System Landscape for R/3 Server. I maintained the Connector Properties,User Management Properties. Then i tested by creating the Transaction Iview after maintain
-
Site owner unable to save template
Hello, I have a user that is in a site owner SP group with FULL CONTROL perms. As a member of this group he was able to, until recently, change then save sites as a template for later use. Now when he tries to save a site as a new template, it says a
-
Unable to see apps running in the background
I just downloaded the most recent iOS update. Now I am not able to see what apps are running in the background on my iPad or my I phone. When I hold the start button Siri comes up. With the new update, how do I turn off apps that are running in the
-
Problem with new window opening with basic test JTree program
I'm still getting to grips with Swing, and have now moved on to basic JTrees. I'm currently trying to use an add and delete button to add new nodes to the root etc. The addition and deletion is working ok, except that each time the addButton is press