Middleware_Data is not carried

Dear friends,
    We have successfully down loaded Business partners from R/3 (Development) to CRM (Developement) through middleware configuration.
Now we are trying to dowmload the data from R/3 (Production) to CRM (Production) using the same middleware configuration. We are possible to view out bound queues in R/3 (Production) for BUPA_MAIN, BUPA_REL,DNL_CUST_ACGRPB.
All the above said customizing objects are coming as ststus "READY" in R/3 Production. And also if we execute the objects it is moving to CRM Production.
Problem:
After executing the customizing objects in R/3 Production (Out bound queue), it is not coming and sitting into inbound queue in CRM roduction.
But if i run transaction code R3AM1(in CRM Prod), the above said customizing objects having the stsus as "Done".
Even though it is "done" status, i can not possible to view any new Business partner in CRM (Production) from R/3 (Production).
I have checked all the Patch levels are same in R/3 systems and CRM systems.
Please guide me, why the queues are not carrying any datas from R/3 to CRM, even though the ststus is "Done" (in R3am1).
Thanks
Senthil

Hai Michel,
   We did not maintained any filter objects for any objects (Both customizing objects, business objects).
What is the importance of maintenaning filter objects?
As u said we have checked for objcts activation in R3ac4.
In this we found that RFC destination as CRP for BUPA. But CRP is actually a System ID in our configuration, it is not a RFC destination.
How does the system picks up "CRP" as a RFC destination for BUPA?
Please guide as what could be the probable settings for object activation?
If u please give your mail ID, i will post the screen shots for better clarity.
Thnks
Senthil

Similar Messages

  • Engineers not carrying boxes?

    Please hear my tale of woe and be warned.
    I recently changed from BT vision (rubbish box that started to freeze and forget recordings) to the Youview as I signed up to netflixs and few changes to my account and packages. This was all fine and box arrived when stated and i installed box and was instantly impressed as it worked some much better. Then after 2 days then the trouble hit.
    The box cuts out it forget the channels and mainly the Sky Sports which is frustrating during a game. I have to retune the box all the time and it even cuts out and reboots itself. I informed BT and they got me to do the maintance mode reset and turn on and off etc etc. and wait for 2-3 days to see if the problem persist. Oh course the problem persisted they then agreed to send an engineer a few days later.
    The engineer arrived and  messed around with the settings and what not and said he done a software update but what I have described is a common problem with these old refurbished box. Hang on old refurbished box?? I just signed up to a new 12 month contract and they have given me a rubbish second hand box! Surly that cant be so the engineer was doing a few more tests concluded the box is faulty but working ok at the moment and I had a I went online and sure another there's a G4 box which is smaller faster lighter etc etc So I asked the engineer why have I been sent this old box and how do I get a new one is that something he can swap for me he replied that the does not carry boxes on his van and I would need to get and openreach engineer out or get BT to send one.
    So I rang up AGAIN saying I still have the issue and the engineer said the box is faulty but he can not replace it as he doesn't carry them (whats the point in that) I need openreach to turn up. The person I spoke to said I should have been sent the G4 and agreed as I was in the first month still they will send someone to swap it for free but can ot just send it out to me.
    Another day off work and right on time an engineer turns up again. Guess what he was not a openreach engineer either and someone who also has no boxes on there van ( I struggle to understand what the point in these guys are)this engineer  said everything is fineif I have a problem I have to contact BT direct to get them to send an openreach engineer. 
    Im getting pretty sick of it now and cant get the time off to keep sitting waiting for the wrong guy to turn up. How hard can it be to just send me the correct box ill happly return this rubbish one and to be honest I simply regret the whole ordeal and wish I never re-signed for 12months either the engineers are lying which I doubt as 2 have said the same thing or BT has not got a clue how pointless these people are if there job is TV repair and they don't carry spares?!.
    Can anyone one here please please point me to how I can get an openreach guy to come with the correct box or simply better yet just get one sent like when I signed up?? otherwise im stuck with this rubbish for a year!!

    Hi Therobster85,
    Welcome to the forum and thanks for posting, I'm sorry about the problems with your Youviewbox.  I wanted to clarify that BT Openreach do not maintain or carry Youview boxes either this is solely done by the Qube engineers and I am really sorry about that incorrect information.
    Please use the 'contact the mods' link in my forum profile to send over your details and we'll be happy to look into this further. You can find the link by clicking on my username.
    Thanks
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How do I buy music not carried by iTunes Store (for my iPhone)

    There are songs or albums I may want to buy that are not carried by the iTunes store. 
    Is there an easy way I can use my iPhone to buy a song that is not in the iTunes Store and add it to the Music library on the iPhone and later sync to iTunes on the iMac? I'm not that techie, but I would imagine there are easier ways to get non-iTunes songs to the iPhone.
    The only way I know how to do it currently is buy a CD and copy the CD to iTunes or buy an audio file using the iMac then import it to iTunes, then sync to the iPhone.
    In otherwords,
    Vendor -> iPhone/Music -> Sync to iMac/iTunes
    instead of
    Vendor -> Download to iMac and Import to iTunes -> Sync to iPhone/Music
    ~~~Thanks, Teellbee

    You must buy it on your computer, then import it into iTunes, then sync it to the iPhone. To import into iTunes you can just drag and drop it onto the iTunes app.

  • Order can not carry out revenues

    Hi Experts ,
                      I was trying to release production order and got message no valuation variant is assigned . Even after assigning it in opn2 and reading PP master data it is showing same error .
    Also while doing goods receipt ( MB1A ) I am getting error : Order 600003045 can not carry out revenues .
    Please guide
    Thanks
    Neal

    Hi neal
    As per controlling config. Planed cost has to be calculated during release are create of prod order. For that you have to assign costing carriant in OPL8. both for Plan and actual . in standard SAP PPP! is costing variant for plan and PPP2 is costing variant for actual.
    For this costing cariant you have to assign costing type and valuation variant.
    Please do it SPRO-Production-SFC-Integration-Order costing
    Do these setting.
    Standard valuation variant for PPP1 is 006 and for PPP2 is 007.
    Regards
    J. Saravan

  • Invoice corrections Sales order- New Pricing is not carried out

    Hi All,
    waiting for some one to guide me in a right way...
    I have Scenario where creating a invoice correction request with reference to Invoice document.New pricing is not carried in debit line item even though i changed the pricing date as current date for the line item
    When i copied with the invoice document, 2 new line items are created with a same price conditions.
    1st line item is a credit and 2nd line item is a debit item.
    I need to do a price adjustment in debit line. So i maintained a new pricing record for the material to carry out the price.
    To achieve this in customizing VTAF (billing to sales) I have  tried multiple options  as below in  2nd pricing type field as B,C,D,E and F
    2nd Pricing type  - B Carry out new pricing
    C     Copy manual pricing elements and redetermine the others
    D     Copy pricing elements unchanged
    E     Adopt price components and fix values
    F     Copy pricing elements, turn value and fix
    But still the new pricing is not carried out.I tried to manually change the Pricing date in the line item level, still the new price is not updated in the order.
    I have seen SAP Help in below link the Debit line can update with correct price point 3 in proces flow , check this below link for reference.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm.
    Please help...
    Regards,
    Parthiban

    Hello Parthiban,
    I feel you are aware of the effect/functionality of 2nd pricing type.
    In the invoice correction request, two items are automatically created for each item in the invoice to be copied (which you did mention):
    - first item:   credit memo item
    - second item:  debit memo item
    And for invoice correction request, a particular pricing type is needed for the second item.
    So as per standard, you have to use pricing type 'E' for the credit memo item to guarantee that the item will not be changed.
    And you should give a new pricing type to the debit memo item. 
    The system creates a credit or debit memo depending on whether a postive or negative difference is generated.
    So that means
    Pricing type will effect ItemCat Proposal-G2N
    and 2nd pricing type will effect 2ndItemCatProposal-L2N
    Now, make changes in pricing type based on your business requirement.
    I hope this will assist you in understanding.
    Thanks & Regards
    JP

  • Balance not carried forward when changing fiscal year in Report Painters

    Hello guys,
    Im using report painter (FGI3) to create my financial statement report, when i change to fiscal year 2009, the balance in my balance sheet is not carried forward to year 2009, its only shows the the movement.
    Assume, the total asset in dec 2008 is 10million, transaction in januari is -900.000,
    the total asset in januari 2009 should be 9.1 million, but it only shows -900.000
    Sorry my english not so good
    Anyone can help..
    Thanks.
    Edited by: rama dazkia on Feb 2, 2009 3:16 AM

    Thanks for the reply,
    I've already doin the year-end activities, if i see the balance in F.01 it is correct
    but in my report painters especially in january 2009, it only shows the difference
    FYI, i using report painters FGI3, FGI5
    Thank you

  • G/L account balance not carried forward next year

    Dear All Expertise fourm,
    I found in my report(S_alr_87012277) some G/L account is not carry forward into 2009 from 2008. But in 2008 there has balance.
    It should come in 2009 "Bal carried Fwd". I had done some process for this but nothing change.
    I did block input G/L account from FS00
    I execute program RFSEPA01
    But not any change.
    Can anybody advice me?
    Thanks & B/R
    Bishnu

    Hi
    Do the Balance Carry Forward once again, some times it may not CarryForward the Balances.
    Balance Carry Forward for General ledger -->F.16/FAGLGVTR
    If New GL is activated kindly do with FAGLGVTR
    Regards
    Venkat

  • HT4285 i have been using my mac book pro for almost an year..My  use is pretty safe as i use it only at my home and do not carry it at office... my sues is shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost.

    i have been using my mac book pro for more than 11 months.
    .My  use is pretty safe as i use it only at my home and do not carry it to office...
    my  confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth it

    Like any other insurance, it's only worth it if you have a problem.  I've purchased it on my "high risk" Macs and not purchased on the others.  So far I've never needed it. 

  • Session data not carried over. with IE6SP1 and WL7

    Hi,
    We recently upgraded our clustered WL to WL7x and after that we started seeing
    a strange problem regarding session data of our HTML/Servlet pages.
    When we access the pages through this cluster, the session data(browser cookies
    not accepted) is not carried forward in IE6 SP1. With IE5x it works fine. The
    Local Intranet is always coming as blocked for the cookies. I am not able to reset
    the settings also.
    The same set of programs are working fine with server running WL5x.
    Is it anything due to P3P or is there any setting I should do at WL7 level for
    this problem? When I do the URL rewriting this works fine but, as many are static
    HTMLs submitting servlet request, we are not able to do URL rewriting.
    Any help on this will be highly appreciated.
    Thanks
    kavitha

    It doesn't seem to be a problem with serializable attributes though.
    Also Weblogic doesn't use the distributable tag. So that should
    not matter too.
    Can you investigate further and try to pinpoint the issue?
    When we access the pages through this cluster, the session data(browser
    cookies not accepted) is not carried forward in IE6 SP1What do you mean by session data not carried forward?
    -Vinod.
    "Stjepan Brbot" <[email protected]> wrote in message
    news:[email protected]..
    >
    "kavitha" <[email protected]> wrote in message
    news:[email protected]..
    Hi,
    We recently upgraded our clustered WL to WL7x and after that we
    started
    seeing
    a strange problem regarding session data of our HTML/Servlet pages.
    When we access the pages through this cluster, the session
    data(browser
    cookies
    not accepted) is not carried forward in IE6 SP1. With IE5x it works
    fine.
    The
    Local Intranet is always coming as blocked for the cookies. I am not
    able
    to reset
    the settings also.
    The same set of programs are working fine with server running WL5x.
    Is it anything due to P3P or is there any setting I should do at WL7level for
    this problem? When I do the URL rewriting this works fine but, as many
    are
    static
    HTMLs submitting servlet request, we are not able to do URL rewriting.In clustered environment session object must implement Serializable
    interface.
    Also your web application has to have parameter "distributable" set ontrue
    in "web.xml" configuration file.
    HTH

  • Leading zeros are not carried from the pivot table to exported Excel (9927815)

    Hello All -
    I am just wondering if there is a fix available for -- Leading zeros are not carried from the pivot table to exported Excel (9927815)
    can anybody suggest when it will be fixed and if there is any-workaround for this issue if there is no fix available.
    Thanks
    Ram

    Thanks Timo -
    Studio Edition Version 11.1.1.2.0
    About
    Oracle JDeveloper 11g Release 1 11.1.1.2.0
    Studio Edition Version 11.1.1.2.0
    Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
    Copyright © 1997, 2009 Oracle and/or its affiliates. All rights reserved.
    IDE Version: 11.1.1.2.36.55.36
    Product ID: oracle.jdeveloper
    Product Version: 11.1.1.2.36.55.36
    I will check on support.oracle.com

  • How come when I copy and paste, my font is not carrying the shadow??

    I am trying to edit a menu and when I copy and paste the script it does not carry over the shadowing. I am new to Adobe PS and I dont even know how to shade in the first place! Someone please guide me in the right direction! Thanks

    Here's a handy thing:  If you right-click on the layer in the Layers palette you can copy just the layer style, then right click on the layer in the destination image and paste the layer style.
    -Noel

  • IMac does not carry on the system.

    Hi All.
    I am having a very strange situation with my iMac (IOS updated).
    When I woke it from sleep, could not type the password on the box. I forced it to turn off (held the button in the back). Next time I turned the machie on, the opening sound was OK, the apple was there at the center of the white screen, and the spinning wheel was rolling.  Normally the spinning wheel rolls for some moments, the the box for the password appears and we go on.  This time, the spinning wheel keeps rolling for some 3-5 minutes, them the apple in the center of the screen is replaced by the symbol of a circle crossed by a straight line from right-botton up to left-up, somethig like a traffic sign for a forbidden way.  And the system does not carry on.
    Does any one know a process to pss it and carry on the system?
    Best,
    Sergio

    Aqua, i still need help.  The system came from Apple repair with OSX version 10.6.8 (I had Lion on it) and I am trying to recover my time machine backup, but the HD is not accepting to be the destiny of the recovery.  Probably something is avoiding it but I can't find.  Do you know how to do it?

  • Existing settings do not carry over on updating. ie: tabs below.

    on updating firefox does not carry over and of the user adjusted settings. WTF
    in previous version I could hover over a thumnail with the curser and it would open to size in a new phantom window. was a great feature.
    I set firefox to check but not install updates. on the latest restart it installed updates anyway. please let me control this. ANOYED USER
    ''locking as a dupe of https://support.mozilla.org/en-US/questions/1007651''

    Hi,
    I have just downloaded the 5.1.7 update and saw the following
    Microsoft will end support for Internet Explorer for Mac on December 31st, 2005, and will provide no further security or performance updates.
    Additionally, as of January 31st, 2006, Internet Explorer for the Mac will no longer be available for download from Mactopia. It is recommended that Macintosh users migrate to more recent web browsing technologies such as Apple's Safari.
    So if you want it do it soon.
    Happy Christmas everybody,
    Alan
    indigo imac 350 slot loading + 256 mg Ram = 320. 6 gig hard drive   Mac OS 9.2.x  

  • How can you sort bookmarks in the Sidebar by date added? Works in Library but does not carry over to Sidebar.

    When opening the Bookmarks Sidebar, the oldest bookmarks added are at the very top, easily visible.
    The most recent bookmarks added are at the bottom, requiring me to scroll all the way down every time I want to visit a recent bookmark. This is a major nuisance. I'm actually a little shocked that this happens when it's such an obvious hassle.
    How can I flip the list of bookmarks so the newest ones are right at the top where I can easily access them?
    Sorting in the Library does not carry over to the Sidebar as far as I can tell.

    Looks as though the SortPlaces add-on should be able to do it.
    Similar thread: [http://support.mozilla.com/fur/questions/771606 I would like to find a way to save my bookmarks unsorted but with the newest saves at the top of the list. I don't want alphabetical order. 3.6.13 | Firefox Support Forum | Firefox Help]
    Add-on: [https://addons.mozilla.org/en-US/firefox/addon/sortplaces/ SortPlaces :: Add-ons for Firefox]

  • Just upgraded Elements 9 to 10.  my Neat Image plugin did not carry over.  Can anyone help me?

    Just upgraded Elements 9 to 10.  My neat image plugin did not carry over.  Can anyone help me?

      Go to Program Files or on 64 bit systems Program Files (x86) and find the file NeatImage.8bf in the PSE9 plug-ins folder. Copy it to the PSE10 plug-ins folder.
    Alternatively go to Program Files\Neat Image and copy the file from the source.
     

Maybe you are looking for