Migrate preferences from DW8 to DWCS3

I know I can export/import site information but I want a
similar
proceedure for preferences. I have searched for this
information but I
have obviously overlooked it. Can anybody supply a pointer to
this
information or, possibly, the steps needed to accomplish
this.
Thanks,
Cliff

Randy Edmunds wrote:
> > > > I know I can export/import site
information but I want a similar
> > > > proceedure for preferences.
> > >
> > > If you have DW8 installed when you install DW
CS3, the preferences
> > > are automatically migrated.
> > >
> > > There is no other tool in DW for migrating
preferences, but you
> > > can do it manually. Are you using Mac or Win?
> >
> > Thank you, I didn't realize they would be
automatically migrated. I
> > am using a PC/Win. Do you have a manual procedure
if I should need
> > it in the future?
>
> Warning: this requires manually updating the Windows
Registry which
> can totally mess up your system, so proceed at your own
risk.
>
> The DW8 General Registry key is here:
> HKEY_CURRENT_USER/Software/Macromedia/Dreamweaver 8
>
> The DW CS3 General Registry key is here:
> HKEY_CURRENT_USER/Software/Adobe/Dreamweaver 9
>
> Use regedit to export the DW8 registry settings and then
import it
> into DW CS3.
Thank you for the procedure. I will file it away in case I
need it in
the future.
Thanks again.
Cliff

Similar Messages

(Re)Migrating Preferences From Previous Version

I am running SQL Developer ver. 1.0.0.14.67 on Windoze XP Pro 2002 SP2 with JDK1.5 installed. I wanted the patch2 release (ver 15.57) but Check For Updates reported no updates. So I downloaded sqldeveloper-1557-no-jre.zip and unzipped into a new directory as per instructions. Unfortunately, I hit cancel when asked if I wanted to migrate my preferences from a previous version the first time I started up sqldeveloper.exe in the new directory.
Now I want it to ask me again about my preferences from the previous version. What happens to the old registry setting relating to the old version in the other directory? Do they ever get removed when you put a new version in a new directory. I want a clean install. Is there a safe way to trigger this initial setup dialog?

To be asked (again) if you want to migrate settings, you need to delete the \sqldeveloper\jdev\system directory and then restart sqldeveloper. You will get the prompt again. Please note, that connections are not migrated. I typically export my connections file to a safe working directory.
Sue

Migration Assistant Copied System Preferences from a Third HD!

I used Migration Assistant to copy files off an iMac and onto a new HD in a MacPro. I purchased a second HD for the MacPro especially for this occasion because I wanted to leave the original MacPro HD intact. At this point, I had two HD's in the MacPro. After installing Snow Leopard, Migration Assistant copied all files and users as expected but something very strange happened:
1. iMac is 10.6.5 but new HD has 10.6
2. System Preferences were taken from the existing HD in the MacPro
I knew there was something wrong because the desktop image was from the original MacPro HD.
What's more annoying is that I completely wiped the new HD using Disk First Aid and removed the original HD from the MacPro so I could start the entire migration process again. Before quitting Disk First Aid, I noticed that it said 800mb had been used even though I had zero'd out everything.
Again, for the second attempt I decided to remove the original HD from the MacPro and just leave the new drive in there, but it did it again.
1. Question - If I had assigned Migration Assistant to copy files from the iMac HD why did I end up with System Preferences from the original MacPro HD?
2. Question - After completely removing the original MacPro HD from the machine, why did Migration Assistant set up the new HD with the System Preferences on an HD that I had completely removed from the machine?
I know all I have to do is use Software Update to bring it back up to 10.6.5 but it's really annoyed me because now I am wondering about of all the 500 gigs and what files may have been affected (hopefully none). I've had a quick look through the contents but I won't be able to tell because there are so many of them. And do I really want to spend time digging around in the Library of the iMac to copy across the System Preferences to the new HD and then remove what shouldn't have been there in the first place? I don't think so, and I shouldn't have to.
I do wish Apple would have their software do what it says and not go digging around on another HD that was lying dormant for this exercise, especially after removing it for the second attempt. It's wasting so much of my time.
Any thoughts, opinions, excuses and remedies would be greatly welcomed.
Thanks in advance.
Message was edited by: inknpaper

inknpaper wrote:
I used Migration Assistant to copy files off an iMac and onto a new HD in a MacPro. I purchased a second HD for the MacPro especially for this occasion because I wanted to leave the original MacPro HD intact. At this point, I had two HD's in the MacPro. After installing Snow Leopard, Migration Assistant copied all files and users as expected but something very strange happened:
You mean you installed OSX on the new drive. Apparently you used a 10.6.0 disc.
Then, presumably, your Mac re-started (from the new disk), you set up a user account, then started +Migration Assistant.+
Migration Assistant doesn't install or copy OSX; whatever version of OSX you put on that drive is still there.
2. System Preferences were taken from the existing HD in the MacPro
Extremely doubtful.
You have an extra user account (the one you set up after installing OSX and before doing the Migration). Unless you changed it, that account will have the default desktop picture.
Are you sure the account you transferred has a different desktop picture than it did on the iMac? If so, is it the default?
What's more annoying is that I completely wiped the new HD using Disk First Aid and removed the original HD from the MacPro so I could start the entire migration process again. Before quitting Disk First Aid, I noticed that it said 800mb had been used even though I had zero'd out everything.
Yes; that's the partition map and empty directories.
1. Question - If I had assigned Migration Assistant to copy files from the iMac HD why did I end up with System Preferences from the original MacPro HD?
As above, I don't think you did. Be sure which account you're logged-on to.
For best results, start over, and use +Setup Assistant+ instead of +Migration Assistant,+ so you don't end up with extra accounts. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum), and note the green box there.

How to migrate user preferences from BO XI R2 to BO XI 3.1

Is there any way we can migrate the user preferences from BO XI R2 SP4 (on Solaris UNIX) to BO XI 3.1 SP3 (on Solaris UNIX)?

Hi Anshuman,
You can migrate the user preferences using the Import Wizard.
There was an issue (ADAPT01447740) in XI3.1 covered by the following note:
1519979 - Infoview Preferences are not imported properly
So I would ensure that your 3.1 SP3 destination system is patched upto the version which includes that fix i.e. at least FP3.2.
I hope this is a very helpful answer to you.
Kind regards,
John

Just reinstalled software and migrated data from Time Machine, now iMac does not recognize printer or camera

Under the direction of Apple Support, I recently erased my iMac (Intel) hard drive, reinstalled and updated software and migrated data from an external hard drive via Time Machine.
Now, after clicking on "PRINT", the print dialog box says "printing" then says "no pages found", and finally says "stopped"; and when I plug in my camera to download photos, the camera is not recognized. Both printer and camera are connected via USB.
I checked connections, verified printing and iPhoto preferences, turned printer off then on again, unplugged and replugged USB connections, and checked and followed directions in the Help menu.

Thanks very much, I'd just tried rkaufmann87's suggestion and entered "This solved my question" when your suggestion popped up—you deserve a "This solved my question" too, though I saw only an option for "This helped me".
Before I got rkaufmann87's suggestion, I repaired disk permissions and that resolved the camera problem. Both of you nailed the solution.
Thanks again!

Migration Assistant from PowerBook 10.3.9 to new MacBook Pro?

A friend has just bought a new MacBook Pro. His previous Mac is a PowerBook (G4 1.0 GHz 15" FW800 - Aluminium) still running Panther 10.3.9.
He's asked me to help him migrate his files, settings, apps etc. to the new Mac. I had thought to use Migration Assistant/Setup Assistant to do this, but the manual for the MacBook Pro says:
+"Before migrating, use Software Update on your other Mac. The other Mac should have one of these versions of Mac OS X software—either Mac OS X v10.4.11 or Mac OS X v10.5.6 (or later)."+
Does this mean you can't migrate from a Panther Mac to Snow Leopard using Migration Assistant?
TIA,
Chris Adams.

You use Migration Assistant from the new machine. The old machine needs to be started into Target Disk Mode. Both machines need to be first connected via Firewire cable. See the following:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

After migrating files from iMac to new macbook pro my macbook is now called iMac in device listing

I purchase a new macbook pro and migrated files from my iMac all the files moved and everything is good except now in finder under device my macbook is now named as my iMac. can I change this?

Go to System Preferences click Sharing and change the Computer Name.

Migration assistant from 10.4.11 to 10.6.7

Looking at some discussions it seems that the migration assistant not working properly from 10.4.11 to 10.6 is a quite common problem. But I can't find a solution. I tried both the wireless connection and the FireWire-option. The migration assistance looks like working very hard for minutes or even more than an hour (wireless), it reports successful migration, but in the end .... nothing has happened. I can't find a single file nor any of my mail accounts being transferred. Can someone provide me with a solution? Many thanks!

Connect the two computers via Firewire cable. Boot the OLD computer into Target Disk Mode by restarting and after the chime press and hold down the "T" key until the TDM logo appears. Boot the NEW computer normally. After it starts you should see a Desktop icon for the disk drive of the OLD computer.
Open Migration Assistant from the Utilities folder of the NEW computer. Use the option to migrate from another computer or disk drive. Select the icon for the OLD computer's disk drive. Migrate your Home folder, Applications, and network preferences.
After it has completed you need to restart the NEW computer and log into the account you just migrated.

HT1277 Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Mail has gone crazy. Header's and messages are mixed up. New Mac Book Pro. Migrated files from Time machine running snow leopard. Reinstall or new computer needed?

Ok; I'm not sure what you're doing. 36 hours is rather long. Seems like a new migration. Not what I intended.
Here's what I intended: from the newly-migrated and apparently-corrupt environment, create a new user, not related to any existing user, nor any migration-created user, or any other user for that matter. That is, use  > System Preferences > Users and Groups, authenticate yourself by clicking on the padlock, and then click the + and create a wholly new user. Then log in under that user and establish the mail access.
36 hours? I'm wondering if there's an error or an exceedingly slow network here? Or a really, really slow disk? Or a sick backup? (WiFi isn't the path I'd usually choose, either.)
Failing the attempted second migration, I'd try a different tactic. Does your existing (old) system work? If so, I'd bypass the backup and connect an external (scratch) USB disk drive to the (old) sstem and then boot and use Disk Utility booted from the installer DVD disk or boot and use Disk Utility from the recovery partition or booted from a recovery partition created on some other external storage (details here vary by the OS X version and what hardware you have), and perform a full-disk backup of your original internal disk to (scratch) external storage. (Make sure you get the source and target disks chosen correctly here; copying the wrong way — from the scratch disk to your existing disk — will clobber your data!) In esssence, this will clone your existing boot disk. Then dismount the (formerly-scratch) external disk, transfer it over to the new system, and use it as the source of the migration, by performing a fresh OS X installation on the new system.
Target Disk Mode is also sometimes an option for accessing the disk for a migration, but that requires the right cable, and requires systems that have the same external connection; newer MacBook Pro systems use Thunderbolt for this, and older systems tend to use FireWire. And I'm guessing you don't have compatible hardware.
The details here can and do vary by your OS X versions and your particular Mac systems — if you'll identify the specific models and hardware, somebody might be able to better tailor the above (fairly generic) sequence to your particular configuration.

Have new MacPro notebook, started to migrate things from Mac and want to stop midstream...how?, Have new MacPro notebook, started to migrate things from Mac and want to stop midstream...how?

I have a new MacPro notebook, I started to migrate things from older Mac and want to stop mid stream, how do I do this?

The only way to do that is by turning off your computer. However, this may create some problems in Mac OS X, so I recommend you to finish this migration. After migrating, if you don't want the migrated files, create a new user in System Preferences > Users & Groups, and delete the old user

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

It's quite possible, since you are using an MBA without Firewire, that it could take that long.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
>Classic Environment, and subsequently any Mac OS 9 or earlier applications
>Screensavers written for the PowerPC
>System Preference add-ons
>All Unsanity Haxies
>Browser and other plug-ins
>Contextual Menu Items
>Applications which specifically require the PowerPC G5
>Kernel extensions
>Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
>MacBook Air- Migration Tips and Tricks;
>MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
>In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
>
>In your /Home/Library/ folder:
>/Home/Library/Application Support/AddressBook (copy the whole folder)
>/Home/Library/Application Support/iCal (copy the whole folder)
>Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
>
>/Home/Library/Keychains (copy the whole folder)
>/Home/Library/Mail (copy the whole folder)
>/Home/Library/Preferences/ (copy the whole folder)
>/Home /Library/Calendars (copy the whole folder)
>/Home /Library/iTunes (copy the whole folder)
>/Home /Library/Safari (copy the whole folder)
>
>If you want cookies:
>
>/Home/Library/Cookies/Cookies.plist
>/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
>
>For Entourage users:
>
>Entourage is in /Home/Documents/Microsoft User Data
>Also in /Home/Library/Preferences/Microsoft
>
>Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Using migration assistant from HDD only to SSD+HDD?

Hi,
Usually, when buying a new mac and starting it for the first time, I use the migration assistant to get everything (software, settings, data...) from my time capsule backup.
I am currently using an iMac 24'' which only has a "standard" HDD. I am however thinking about upgrading to the latest iMacs, potentially with the "SSD+HDD" option.
The description on the "Configure" page of the online store says : "If you configure your iMac with both the solid-state drive and a Serial ATA hard drive, it will come preformatted with Mac OS X and all your applications on the solid-state drive. Then you can use the hard drive for videos, photos, and other files."
My question is therefore the following : would the migration assistant be "smart enough" to place my OS and applications on the SSD drive, and the rest of my files ("videos, photos, and other files.") on the HDD?
Thanks in advance!

I had the same issue some time ago: I added a 32 gb SSD to my mac running leopard. Then wanted to use install Snow Leopard and use migration assistant to restore the sytem with Snow leopard and applications on the SSD, and the user folders on the old 250gb HD. Turns out this isn't possible. Manually accessing your time machine or other backup up to restore files by hand is a pain. Just installing Snow Leopard and pointing the user folder to the Leopard user folder on the HD creates problems too, just as pointing it to a newly created folder.
Solution:
-Backup your old system with time machine to an external disk
-Note: make sure you don't mix up SSD and HD in this manual.
-Install SSD (If this means you no longer have a cd drive, use a copy of snow leopard on an external drive).
-BE SURE YOUR OLD SYSTEM IS BACKED UP WITH TIME MACHINE.
-Then install OS X TWICE: once on the old HD and once the SSD. Wipe your HD with Disk Utility before install.
-Start up OS X on the HD, use the option key at startup if necessery to select the right disk.
-Use migration assistant to restore from the time machine backup. Now you have a fresh install of OS X, with your user files and applications intact.
-Now startup OS X on the SSD.
-Make the SSD startup disk in system preferences -> Startup disk.
-Go to System preferences -> Users. Unlock. Create an extra user, so you end up with a spare user account, and one you will actually use. Now right click on the user account thats going to be used, and select your user folder on the HD that you just restored with Migration assistant. Just leave the spare one. It is for emergencies and also disk failures: OS X is designed to have user and system files on the same disk, so you should always have one user account sticking those rules.
-Restart OS X on the SSD as asked.
-Now all thats left to do is migrate applications from the HD application folder to the SSD application folder by simply copy/pasting. This is trial and error, but in my case 90% of the applications gave no trouble at all. The ones that did are library based media applications like Aperture. All I needed to do is go to their preferences and point them to their old libraries on the HD. MS Office was the only application that needed full reinstalling. The applications that ship with the OS don't need to be migrated of course since they are already there on the SSD.
-Point your dock icons to the right folders (on the HD) and applications (on the SSD)
-Make a new time machine backup
-Last step, optional: clean up the HD. You don't need the system folder that is still there, but I chose to keep it for a while as a backup. I left the library in place there too, since I don't know which applications still use it, but in time I will clean it up too.
And one more thing: Since Migration assistant doesnt' just copy files, but also seams to adapt application databases of Apple apps to work with a newer version of an application coming with a new OS, such as Mail, Safari, iCal and Address Book, this is probably going to be the best way to upgrade an SSD+HD setup to Lion too. (Lion has better SSD support). Provided of course that Apple doesn't update Migration assistant, which is what should actually be done. Upgrading this way took me 2,5 hours, most of which was spent waiting ofcourse.
Message was edited by: jason487
Message was edited by: jason487

Using Migration Assistant from iMac G5 to Intel Core Duo

I've developed a problem while transferring files using Migration Assistant.
I've inadvertently created two accounts. I misunderstood what was going to happen when renaming one of them. I thought I had to change the old home folder/user name to avoid a conflict when creating a new Admin/user acct on the new computer .... don't ask!! So, I now have several folders: some that came on the new iMac, the others that read 'from the old Mac'. It's apparently the new login/acct name that's linked to the 'from the old Mac' files . Hope this is making sense.
If I go up to the top right menu and select the newly named acct., it rotates and brings up all the settings and preferences I wanted transferred and obviously were. If I use the old login name, it's just the basic iMac settings without my settings, prefs,etc..
How can I delete the basic acct. and use the imported settings/preferences? I want only one Admin Acct./log in with my imported settings/prefs. Do I delete folders and rename the 'from the old Mac' to just the folder name? I've read some of what Kappy has said aout migrating files from the G5 to the Intel, and I know he's an expert, he's helped me before, but in truth, I don't really understand what he's saying about how to migrate to the Intel.
Can someone offer some advice? I'd appreciate it.

You may not want to keep the Home folder you've migrated. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

How can I migrate everything from one account to another on same computer?

How can I migrate everything from one account to another on same computer?

Transferring files from one User Account to another

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Migrate preferences from DW8 to DWCS3

Similar Messages

Maybe you are looking for