Migrate WSUS server from 2003x86 to 2008x64, new hardware, use same name and IP address?
Searching through the WSUS forums and reading the TechNET migration documentation, I have bits and pieces of information to make this a smooth transition...I think. I have a plan in mind but
would like the communities input on what I am thinking before moving forward and having it blowup in my face :). <o:p></o:p>
I have the following currently:<o:p></o:p>
A single WSUS 3.0 SP2 server, running on Server Win2003x86, using the default WID (susdb.mdf) on the same server. I have SQL 2005 Express installed on this server as well for other services
but this has no bearing on the WID correct?<o:p></o:p>
What I would like to do:<o:p></o:p>
I have a new server (a much better one) that I would like to move WSUS on to, that will be running Server Win2008x64 (I have to setup first). <o:p></o:p>
Steps that I would like to follow:<o:p></o:p>
1. I will go through and setup this new server with all M$ updates etc... under a new name (ex. wsusnew) and DHCP acquired IP address and then power it down. <o:p></o:p>
2. Get on my current WSUS server and backup all current WSUS settings, groups, DB etc... to a network location for temporary storage. Then power it down.<o:p></o:p>
3. Delete the current WSUS server computer object in AD, DNS entry I will leave because my intension is to give the same IP address to the new WSUS server.<o:p></o:p>
4. Start the new server, static assign the IP address from the old WSUS server to this new server and then change the name of (wsusnew) to the old servers name, which should be ok sense I deleted
the AD object in step 3.<o:p></o:p>
5. After the obvious restart, the new server will have the same name and IP address as the old server. <o:p></o:p>
6. Now that the new server is up (with same settings name/IP as old server), I will then go through and install the WSUS role on the server and restore my WSUS information.<o:p></o:p>
Questions:<o:p></o:p>
1. Step 2 above, is it possible to do this, without making replica servers? I kept reading about this as I was researching doing this, I would rather just copy the DB and folders and simply
put them in-place on the new server.<o:p></o:p>
2. Step 6 above, restoring of the data, what is the proper way to do this in the scenarioI described? <o:p></o:p>
Thank you to anyone who can provide me some information.
Jeff
Thank you for the reply, I will follow and let you know. Proabably be next week sometime before I'm able to try though. So look for a reponse then. Thank you again.
Jeff
OR...
You can use the much more simple, much more reliable, and much more proven method of:
Install new server as a replica of the old.
Replicate.
Configure new server as upstream server.
Point clients to new server.
Turn off old server after all clients have redirected to the new server.
For everybody that has tried the backup/restore the database procedure described above, they have encounted complications of one form or another.
WSUS has a built-in and fully supported comprehensive replication capbility. use it! :-)
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Microsoft MVP - Software Distribution (2005-2012)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
Similar Messages
-
My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
ThanksHave you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.
-
Migrate user data from SLES10sp3 OES2sp3 to new hardware
Hi,
I am trying to migrate user data on a nss volume from a SLES10sp3 and
OES2sp3 server to new hardware already setup with SLES10sp3 and OES2sp3.
Authentication and configuration of the data selection is sorted. After
starting the data transfer I get a message saying the migration failed.
Below is the error from the log file:
FATAL -FILESYSTEM:migfiles:Fatal: Cannot migrate source path
/media/nss/DATA/Users/JohnG/: nbackup: Failed to open dataset
/media/nss/DATA/Users/JohnG/ for backup
WARNING - FILESYSTEM:migfiles:Warning: Going to next data set
ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 291) An
invalid path was used.
Regards
JohnHi kjhurni,
I have not setup to get update from the Novell channel as I have an issue
with connecting to the update channel but I will deal with that later.
I tried to run a miggui to migrate my data to the new server with SLES10sp3
and OES2sp3. Below is the entire log file, I have highlighted the error at
the end of the log file. (Names and addresses have been changed to protect
the innocent)
Regards
John
2012-01-12 11:15:17,394 INFO - Migration
Framework:getSourceServerConfigDetails():Finding Source Server eDirectory
Tree Name using command: ndsstat -h SERVER1
2012-01-12 11:15:17,474 INFO - MigUtil:ResolvIP:Resolving IP address from
hostname SERVER1
2012-01-12 11:15:17,539 INFO - Migration Framework:Getting Source Server
certificate:Using 10.1.3.1 to retrieve Source Server certificate
2012-01-12 11:15:17,539 INFO - Migration Framework:Getting Source Server
certificate:executing command: LC_ALL=en_US.UTF-8 /usr/bin/ruby
/opt/novell/migration/sbin/getServerCert.rb --server-ip "10.1.3.1"
--ldap-port 636 --file /opt/novell/migration/plugin/conf/SourceServerCert
2012-01-12 11:15:20,795 INFO - Migration Framework:Getting Source tree
certificate:using getSSCert command
2012-01-12 11:15:20,801 INFO - Migration Framework:Getting Source tree
certificate:Using 10.1.3.1 to retrieve Source tree certificate
2012-01-12 11:15:20,801 INFO - Migration Framework:Getting Source tree
certificate:executing command: LC_ALL=en_US.UTF-8
/opt/novell/oes-install/util/getSSCert -a "10.1.3.1" -t "TREE_NAME" -u
"admin.b"
2012-01-12 11:15:21,087 INFO - Migration
Framework:MigController:getSourceServerTreeCert(): :Copied certificate to
/opt/novell/migration/plugin/conf/SourceCert.der
2012-01-12 11:15:21,127 INFO - Migration
Framework:importSourceTreeCert():Using 10.1.3.1 to import Source Tree
certificate
2012-01-12 11:15:21,127 INFO - Migration Framework:Importing Source Tree
certificate:Importing certificate to Java keystore
(/opt/novell/migration/plugin/conf/novellStore.keystore)
2012-01-12 11:15:21,911 INFO - Migration
Framework:importSourceTreeCert()eleting existing source tree certificate
using command: /usr/bin/keytool -delete -noprompt -alias 10.1.3.1 -keystore
/opt/novell/migration/plugin/conf/novellStore.keystore
2012-01-12 11:15:21,911 INFO - Migration Framework:importSourceTreeCert():
command: /usr/bin/keytool -import -alias 10.1.3.1 -file
/opt/novell/migration/plugin/conf/SourceCert.der -noprompt -keystore
/opt/novell/migration/plugin/conf/novellStore.keystore
2012-01-12 11:15:22,577 INFO - Migration Framework:SourceServer
Authentication:Attempting to Connect to Source with the parameters
2012-01-12 11:15:22,587 INFO - Migration Framework:SourceServer
Authentication:Authenticating using LDAP(secure)
2012-01-12 11:15:23,263 INFO - Migration Framework:SourceServer
Authentication:Authenticating to the Source Server returned true
2012-01-12 11:15:23,270 INFO - Migration Framework:SourceServer
Authenticationetecting the source server version
2012-01-12 11:15:23,315 INFO - Migration Framework:Authentication:Using SMS
to validate root password for server 10.1.3.1
2012-01-12 11:15:23,315 INFO - MigUtils:Authentication:Executing
command:/opt/novell/sms/bin/nbackup -U root -R 10.1.3.1 -cf
/var/opt/novell/migration/NewProj5/migsrc.sidf /etc/SuSE-release
2012-01-12 11:15:37,876 INFO - Migration
Framework:getTargetServerConfigDetails():Finding Target Server eDirectoty
Tree Name using command: ndsstat -h 10.1.3.2
2012-01-12 11:15:37,930 INFO - Migration Framework:Getting Target Server
certificate:Using 10.1.3.2 to retrieve Target Server certificate
2012-01-12 11:15:37,930 INFO - Migration Framework:Getting Target Server
certificate:executing command: LC_ALL=en_US.UTF-8 /usr/bin/ruby
/opt/novell/migration/sbin/getServerCert.rb --server-ip "10.1.3.2"
--ldap-port 636 --file /opt/novell/migration/plugin/conf/TargetServerCert
2012-01-12 11:15:40,115 INFO - Migration
Framework:getTargetTreeCertificate():Attempting to connect to Target with
the parameters
2012-01-12 11:15:40,116 INFO - Migration
Framework:getTargetTreeCertificate():Copy certificate to
/opt/novell/migration/plugin/conf/TargetCert.der for CLI usage
2012-01-12 11:15:40,122 INFO - Migration Framework:Importing Target Tree
certificate:Attempting to connect to Target with the parameters
2012-01-12 11:15:40,122 INFO - Migration Framework:Importing Target Tree
certificate:Importing certificate to Java keystore
(/opt/novell/migration/plugin/conf/novellStore.keystore)
2012-01-12 11:15:40,122 INFO - Migration
Framework:importTargetTreeCert():keytool delete command to be executed to
delete target tree certificate
2012-01-12 11:15:40,122 INFO - Migration
Framework:importTargetTreeCert():Executing command : /usr/bin/keytool
-delete -noprompt -alias 10.1.3.2 -keystore
/opt/novell/migration/plugin/conf/novellStore.keystore
2012-01-12 11:15:40,788 INFO - Migration
Framework:importTargetTreeCert():Using keytool to delete existing
alias10.1.3.2
2012-01-12 11:15:40,789 INFO - Migration
Framework:importTargetTreeCert():keytool command to be executed to store
target tree certificate
2012-01-12 11:15:41,486 INFO - Migration
Framework:importTargetTreeCert():Return Value true
2012-01-12 11:15:41,486 INFO - Migration Framework:TargetServer
Authentication:Attempting to connect to Target with the parameters
2012-01-12 11:15:41,487 INFO - Migration Framework:TargetServer
Authentication:Authenticating to the Target Server(secure)
2012-01-12 11:15:41,550 INFO - Migration Framework:Authentication:Using SMS
to validate root password for server 10.1.3.2
2012-01-12 11:15:41,550 INFO - MigUtils:Authentication:Executing
command:/opt/novell/sms/bin/nbackup -U root -l /etc/SuSE-release
2012-01-12 11:16:35,254 INFO - FILESYSTEM:migfiles:Validating data from
source path(s) to target path(s) using migfiles
2012-01-12 11:16:35,254 INFO - FILESYSTEM:migfiles:Executing command:
/opt/novell/migration/sbin/migfiles --source-server 10.1.3.1 --verbose
--source-path "@/var/opt/novell/migration/NewProj5/fs/sourcepaths.in"
--destination-full-path
"@/var/opt/novell/migration/NewProj5/fs/targetpaths.in" --precheck
--progress --progress-interval 1 --source-ldap-port 636
--delete-file-on-restore-error
2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:Enter the username (e.g
cn=admin,o=mycompany)
2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:for the server 10.1.3.1:
Enter cn=admin,o=b password:
2012-01-12 11:16:35,618 INFO - FILESYSTEM:migfiles:Enter the username (e.g
root)
2012-01-12 11:16:35,619 INFO - FILESYSTEM:migfiles:for the server 10.1.3.2:
Enter root password:
2012-01-12 11:16:39,225 INFO - FILESYSTEM:migfiles:Information: Validation
for migfiles is done successfully
2012-01-12 11:16:39,230 INFO - FILESYSTEM:migfiles:
2012-01-12 11:16:39,230 INFO - FILESYSTEM:migfiles:Successfully validated
data
2012-01-12 11:16:39,245 INFO -
FILESYSTEM:Information:****************Migrating files and/or
trustees****************
2012-01-12 11:16:39,246 INFO - FILESYSTEM:migfiles:Migrating data from
source path(s) to target path(s) using migfiles
2012-01-12 11:16:39,246 INFO - FILESYSTEM:migfiles:Executing command:
/opt/novell/migration/sbin/migfiles --source-server 10.1.3.1 --verbose
--source-path "@/var/opt/novell/migration/NewProj5/fs/sourcepaths.in"
--destination-full-path
"@/var/opt/novell/migration/NewProj5/fs/targetpaths.in" --session-file
"/var/opt/novell/migration/NewProj5/fs/migfiles.session" --progress
--progress-interval 1 --source-ldap-port 636
--delete-file-on-restore-error
2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:Enter the username (e.g
cn=admin,o=mycompany)
2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:for the server 10.1.3.1:
Enter cn=admin,o=b password:
2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:Enter the username (e.g
root)
2012-01-12 11:16:39,534 INFO - FILESYSTEM:migfiles:for the server 10.1.3.2:
Enter root password:
2012-01-12 11:16:45,078 INFO - FILESYSTEM:migfiles:Information: nbackup:
precomputing for displaying progress...
2012-01-12 11:16:45,157 FATAL - FILESYSTEM:migfiles:Fatal: Cannot migrate
source path /media/nss/DATA/Users/JohnG/: nbackup: Failed to open dataset
/media/nss/DATA/Users/JohnG/ for backup
2012-01-12 11:16:45,167 WARN - FILESYSTEM:migfiles:Warning: Going to next
data set
2012-01-12 11:16:45,168 ERROR - FILESYSTEM:migfiles:Error: nbackup:
(libtsafs.so 6.50.0 291) An invalid path was used.
2012-01-12 11:16:45,242 FATAL - FILESYSTEM:migfiles:Fatal: nbackup command
failed to complete
2012-01-12 11:16:45,246 INFO - FILESYSTEM:migfiles:
2012-01-12 11:16:45,247 ERROR - FILESYSTEM:migfiles:migfiles command
failed!
2012-01-12 11:16:45,247 INFO -
FILESYSTEM:Information:****************End******** ******** -
Migrate user data from SLES10sp4 OES2sp3 to new hardware
Hi,
Running SLES10sp4 with OES2sp3. I just updated all patches on both the
source and destination servers.
The command "cat /etc/*release" returns the following info:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCH LEVEL = 4
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64
Novell Open Enterprise Server 2.0.3 (x86_64)
VERSION =2.0.3
PATCHLEVEL = 3
BUILD
I then ran "miggui" and connected to both servers and authenticated. I then
selected "consolidate" and selected the folders to migrate. After clicking
"start", the system runs for a few second and then fails with the following
error:
FATAL - FILESYSTEM:migfiles:Fatal: Cannot migrate source path
/media/nss/DATA/Users/: nbackup: Failed to open dataset
/media/nss/DATA/Users/ for backup
Regards
John...mmmh, so applying a million patches, updates and rebooting a zillion times, still no success.
SOLUTION: rsync the two data volumes,
edited each user and group rights
Using iManager or Console1 ispretty slow, so I used NwAdmin (old netware management tool, still the fastest)
(found some interesting rights allocations, fixed them)
changed login script
and all is good .... erm, watch this space -
Can I transfer system from old macbook to new macbook using same OS with time machine?
I have a MacBook running snow Leopard. Thinking of getting a new Pro but want to just transfer my entire desktop and system to new MacBook using Time Machine restore. Is this possible? If not what are my other options so I do not have to rebuild desktop?
Thanks!You can do it either directly from the older MacBook or from Time Machine. Your new MBP is unlikely to boot to the system on the MB as the newer Pro will have a later OS build and different hardware drivers among other things.
Just use Setup Assistant. When you boot the new MBP, after the welcome video you'll be taken into Setup Assistant; you'll be asked if you want to transfer your Applications, Home Folder and prefences from another source. Choose either 'from another Mac' or 'from a TM backup' as appropriate, and connect the Mac (by firewire) or the TM drive when prompted and let it do it's thing.
That will ensure you get one account with no permissions errors and all your stuff should work just as it did on the MB. -
Migrate user data from SLES10sp3 OES2sp3 to new hardware (again)
Hi,
I am running SLES10sp3_64 with OES2sp3_64 and need to migrate the user data
to a new server running the same OS. I have also updated the SLES & OES to
the maintenance pack of November 2011.
The miggui authenticates and I can select the folders for migration. Below
is an extract of the log file error:
FATAL -FILESYSTEM:migfiles:Fatal: Cannot migrate source path
/media/nss/DATA/Users/JohnG/: nbackup: Failed to open dataset
/media/nss/DATA/Users/JohnG/ for backup
WARN - FILESYSTEM:migfiles:Warning: Going to next data set
ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 291) An
invalid path was used.
FATAL - FILESYSTEM:migfiles:Fatal: nbackup command failed to complete
INFO - FILESYSTEM:migfiles:
ERROR - FILESYSTEM:migfiles command failed!
Regards
JohnHi,
The log is from /var/opt/novell/migration of the miggui. The begining of the log is about the connection and the authentication to the servers. Which is 100%
I then also ran the "nbackup" command from a terminal with the same result. I don't think it matters, but I am migrating from-and-to NSS volumes.
I have looked at the tid and have checked all relevent points and again, no issues. Perhaps this is a "NCP" issue rather than a "miggui" issue.
Thanks again.
John
Originally Posted by kjhurni
Which log file is this from? Looks like the filesystem log?
I think there's a migration log and a debug log as well that may show some additional info.
Have you looked at this TID (slightly old, but I think most of it still applies)
Troubleshooting data migration issues with miggui -
First 2012 R2 server in 2008 domain (same name and IP)
Hi all,
Think I know the answer to this but wanted to double-check. I'm installing a Windows 2012 R2 server. It is our first 2012 server in our 2008 R2 environment. It will also be our first 2012 DC. It will be replacing an old 2008 R2 DC and will have the same
name and IP as the old 2008 server. I have several other DCs in place and they handle DHCP and DNS. The DHCP server service is not currently running on the old 2008 server to be decommissioned, and the DNS settings in DHCP server/scope options point to other
servers than the server to be shut down.
Plan is to demote the old 2008 R2 server, wait 24 hours for directory replication and check that all instances of the old server is gone from AD, then rename the old server and assign different IP address. At that point I'll assign the 2012 server the old
server's original IP address and name, then run Server Manager to promote the 2012 server to a DC. Then migrate data.
So, when running DCPROMO to demote the old 2008 server, I'm asked if I want to delete the DNS delegations pointing to this server. Should I? I tend to think I should NOT because the new 2012 server will have the same name and IP as the old one, and that
the DHCP/DNS settings as configured point to other servers anyway. Does that make sense?
Thanks in advance,
Sir_TimbitHi Timbit,
Here is a nice walkthrough article below which is written by Ace:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy -
Unable to connect to WSUS server from the console
I am not able to connect to WSUS server from WSUS console any more suddenly! "please verify that IIS on the server is correctly configured and is running'. I find out that Windows Process Activation Service is stuck in starting.
I killed it with taskkill command but I am not able to restart it. It gives 'Error 1053: the service did not respond to the start or control request in a timely fashion'.
There are some suggestion online but I am not comfortable with those solutions, I prefer to be guided by Microsoft TechNet, thanks.
Thang MoHi,
are there any relevant entries in the system log viewer?
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :) -
How to migrate safari bookmarks from old iMac to new iMac?
How do I migrate safari bookmarks from old iMac to new iMac? Where are the bookmarks located?
Move the file ~/Library/Safari/Bookmarks.plist over, where ~ is the item in the Finder's sidebar with the house icon.
(57085) -
Migrate mail server from 10.5 to 10.6
I have managed to migrate all accounts from 10.5 to 10.6 using this command:
sudo /usr/libexec/dovecot/migratemaildata.pl --moveMail 0 --cyrusBin "/Volumes/ServerHD/usr/bin/cyrus/bin" --database "/Volumes/ServerHD/MailServer/imap" --sourceSpool "/Volumes/ServerHD/MailServer/imap/" --targetSpool "/var/spool/imap/dovecot/mail"
all the accounts now are showing under Server Admin-Mail-Maintenance-Accounts
but when i try to connect from a client machine to setup the email, it connects fine.. but none of the emails showing up in my inbox!..
i can also send emails with no problems, but i cannot receive emails.. here is the SMTP error log:
Apr 25 11:50:59 server postfix/postfix-script[5203]: refreshing the Postfix mail system
Apr 25 11:50:59 server postfix/master[54]: reload configuration /etc/postfix
Apr 25 11:50:59 server postfix/anvil[5046]: statistics: max connection rate 2/60s for (smtp:172.16.0.22) at Apr 25 11:47:13
Apr 25 11:50:59 server postfix/anvil[5046]: statistics: max connection count 2 for (smtp:172.16.0.22) at Apr 25 11:47:13
Apr 25 11:50:59 server postfix/anvil[5046]: statistics: max cache size 1 at Apr 25 11:47:13
Apr 25 11:51:45 server postfix/tlsmgr[5255]: warning: no entropy source specified with parameter tlsrandomsource
Apr 25 11:51:45 server postfix/tlsmgr[5255]: warning: encryption keys etc. may be predictable
Apr 25 11:51:45 server postfix/smtpd[5253]: connect from unknown[172.16.0.22]
Apr 25 11:51:46 server postfix/smtpd[5253]: 1211F497EA: client=unknown[172.16.0.22], sasl_method=CRAM-MD5, sasl_username=user
Apr 25 11:51:46 server postfix/cleanup[5261]: 1211F497EA: message-id=<[email protected]>
Apr 25 11:51:46 server postfix/qmgr[5212]: 1211F497EA: from=<[email protected]>, size=571, nrcpt=1 (queue active)
Apr 25 11:51:49 server postfix/smtpd[5266]: connect from localhost[127.0.0.1]
Apr 25 11:51:49 server postfix/smtpd[5266]: 9CA88497F7: client=localhost[127.0.0.1]
Apr 25 11:51:49 server postfix/cleanup[5261]: 9CA88497F7: message-id=<[email protected]>
Apr 25 11:51:49 server postfix/smtpd[5266]: disconnect from localhost[127.0.0.1]
Apr 25 11:51:49 server postfix/qmgr[5212]: 9CA88497F7: from=<[email protected]>, size=1219, nrcpt=1 (queue active)
Apr 25 11:51:49 server postfix/smtp[5262]: 1211F497EA: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.6, delays=0.03/0.02/0.01/3.6, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 9CA88497F7)
Apr 25 11:51:49 server postfix/qmgr[5212]: 1211F497EA: removed
Apr 25 11:51:49 server postfix/smtp[5268]: 9CA88497F7: to=<[email protected]>, relay=none, delay=0.11, delays=0.01/0.01/0.09/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=domain.com type=A: Host found but no data record of requested type)
Apr 25 11:51:49 server postfix/cleanup[5261]: BF17E497F9: message-id=<[email protected]>
Apr 25 11:51:49 server postfix/bounce[5269]: 9CA88497F7: sender non-delivery notification: BF17E497F9
Apr 25 11:51:49 server postfix/qmgr[5212]: BF17E497F9: from=, size=3347, nrcpt=1 (queue active)
Apr 25 11:51:49 server postfix/qmgr[5212]: 9CA88497F7: removed
Apr 25 11:51:49 server postfix/smtp[5268]: BF17E497F9: to=<[email protected]>, relay=none, delay=0, delays=0/0/0/0, dsn=5.4.4, status=bounced (Host or domain name not found. Name service error for name=domain.com type=A: Host found but no data record of requested type)
Apr 25 11:51:49 server postfix/qmgr[5212]: BF17E497F9: removed
Apr 25 11:52:46 server postfix/smtpd[5253]: disconnect from unknown[172.16.0.22]push
-
How to migrate application server from Tomcat to WebSphere?
Hi,
I installed BO XI 3.1 32 bit in environment:
- AIX 5.3 64 bit
- Deployed Tomcat 5.5 from installing BO
- Oracle client 10G
I need to migrate application server from Tomcat to WebSphere 6.1 and WebSphere 6.1 Server 32 bit in Windows platform.
Could you someone give detail steps
Many thanks in advance and best regards,I tried manually to deploy web applications, but not successful. This is my deployment step following:
AIX 5.3: BOE XI 3.1 :
Copy all <INSTALLDIR>/bobje/enterprise120/java/applications/ to Windows Websphere D:\BO_WAS
WebSphere 6.1 location & IP (windows) :
C:\Program Files\IBM\WebSphere\AppServer1\
IP: 192.168.69.10
Log in to WebSphere Applicaton Server Administrative http://192.168.69.10:9060/admin
1. Under the Applications heading of the console navigation menu, click
Enterprise Applications on the left navigational pane.
2. Click the Install button and navigate to the location of the WAR file to
deploy. If deploying from a remote file system, select the Remote File
System option.
3. Enter a context root for the WAR file (e.g. /CmcApp for CmcApp.war)
(this format (/CmcApp) for Unix OS, have different in Windows ? Could you give me fully path?)
and
press the Next button, followed by Continue.
4. In "Step 1", give a unique name for your web application and proceed to
"Step 2".
5. Highlight the server you created (or highlight server1 if you didn't create
your own) from the Clusters and Servers and enable the Select
checkbox. Proceed to "Step 3".
6. Select the virtual host you created (or default_host if you didn't create
your own) from the Virtual Host drop-down list. Proceed to "Step 4".
7. Review the summary page, and press Finish when done.
8. Click Save to Master Configuration.
9. Click the Save link, then the Save button.
Finally the output is not available.
Many thanks in advance and best regards -
Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ? -
Can I install CS6 from old Mac on new iMac using apple's migration-assitent
Can I install CS6 from old Mac on new iMac using apple's migration-assitent?
you may be lucky, but you should expect problems if you do that.
you should properly install your adobe software using the adobe installation files.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Revision: 949
Author: [email protected]
Date: 2008-03-27 07:12:59 -0700 (Thu, 27 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - try again with legacy-collection true and false.
Doc: No
Checkintests: Pass
Details: Another try in fixing this bug. When legacy-collection is false, Actionscript Array on the client becomes Java Array on the server and my fix yesterday assumed this case. However, when legacy-collection is true, Actionscript Array becomes Java ArrayList on the server. So added code to handle this case.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.javaHi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all! -
Revision: 931
Author: [email protected]
Date: 2008-03-26 11:31:01 -0700 (Wed, 26 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - we need automated tests for this basic case.
Doc: No
Checkintests: Pass
Details: RequestFilter was not handling multiple headers with the same name properly.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.javaHi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!
Maybe you are looking for
-
Can i set up separate bookmarks in safari for each iMac user
can i set up separate bookmarks in safari for each iMac user???
-
Hello Guys Can any one pass on a document that will explain what are the check points that to be monitored on a daily basis for a Application Server? We have several issues where users are complained about load balancing / Citrix / connection issues
-
Hi SAP Gurus, the error says Deficit of SL stck. in qual. insp 336 EA: material no plant sloc. i think the answer is, the Inspection lot for this has long since had a Usage Decision made on it. Once a lot has had a QM Usage Decision, you cannot rever
-
Problems in Master-Detail forms when the detail contains LOVs
I am having problems with master detail forms when the detail contains and lov. In my detail form I have a messageLovInput field that returns 2 values (code and description). When the lov window returns both values the messageLovInput disappear from
-
Export Import with different tablespaces
Does anyone know if there is a way to export from one database (creating a dmp file) and then importing into another database with different tablespaces? I have tried this and get this error: ORA 959. It complained that the tablespace doesnt exist (w