Migrated from HDD to SSD, booting but rc.sysinit borked

I recently bought a SSD disk (Intel 320, 80GB) and migrated over my root partition. The system boots as it should, but for some reason rc.sysinit isn't being executed as it should. When the kernel has proobed all the hardware and the init message and Arch Linux row should appear I just see it loading modules printed in the same format as when probing the hardware. Basically, my boot process looks like the output of dmesg all the way.
However, my network settings are being configured correctly and all services I have specified in rc.conf are started. Clearly it is executing some of the initscripts as it should, but my encrypted partitions remain locked. I don't really know how to debug this, but hopefully someone can shed a light on what's broken. I've tried reinstalling 'base' but that didn't help. Since rc.sysvinit starts with sourcing rc.conf and rc.d/functions I'm wondering if perhaps something is broken in my rc.conf.
And I'm using a custom rolled kernel which has devtmpfs support etc, it was working just fine before the migration.
Here's how I migrated my root:
1) Install SSD drive, create partition, create a ext4 system and mount it
2) rsync -av / (excluding some things like proc, sys, mnt)
3) chroot into the ssd and installing filesystem/initscript packages and editing fstab
4) Changed the slot the hard drives where hooked up to so SSD became sda
5) Booted Arch from USB and installed GRUB
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Stockholm"
KEYMAP=
CONSOLEFONT="lat1-16"
CONSOLEMAP=
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
USECOLOR="no"
# HARDWARE
MODULES=(aes-generic aes-x86_64 xts gf128mul dm-crypt snd-cmipci powernow-k8 k10temp snd_cmipci snd-hda-intel)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME="odin"
interface=eth0
address=192.168.0.4
netmask=255.255.255.0
broadcast=192.168.0.255
gateway=192.168.0.1
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(!hwclock syslog-ng network netfs crond @alsa @openntpd !sshd @smartd @slim @sensors @mpd @cpufreq @arch32 @dbus !hal)
Package versions:
$ pacman -Q initscripts filesystem
initscripts 2012.01.3-1
filesystem 2011.12-2
Last edited by [vEX] (2012-01-27 19:06:16)

Now this is interesting, if I boot the Arch kernel and it runs like it should. Clearly I'm missing something in my custom kernel. Anyone knows where to look for a list that can tell me exactly what things must be in the kernel for Arch?
Last edited by [vEX] (2012-01-29 07:35:33)

Similar Messages

After migration from HDD to SSD, thumbnails in iPhoto are missing

Dear Apple-community,
I migrated my system a week ago. I added a SSD to the HDD which is now in an optibay. After adding the SSD I installed Lion from new on the SSD, migrated all programms etc. from the HDD and left only the user-folders on the HDD.
After repairing the rights and linking the user-folders to the system again, I was able to use everything, beside iPhoto.
in iPhoto the thumbnails don't show up. The categories are there, the pictures also, just I don't see them, just black or grey fields. I tried all the options offered by the menu, that appears when you start with cmd-shift. Now I need new solutions, that could help me get back my thumbnails!
Thanks a lot for your help!

I think I would have find the files on the internal HDD after the migration (eventhough they should be visible in Finder after the migration, don't they?) if there were there, even hidden.
I thought they dissappeared, because I made one mistake in following the instructions for the migration of the system to the added internal SSD (keeping user files on the internal HDD): I had to migrate everything but the content of the user folders from time machine to the SSD, but I migrated from my user folder on the internal HDD to the SSD. I had to migrate only the users, not the content of the user-folder. In the end, all this content was deleted from the HDD I migrated the users from.
Anyway, now all this old files on the internal HDD are deleted, because I restored my user-folder from time machine (external HDD) (because there was no folder visible anymore), so I could start the system again with my used options stored in the user-folder. Afterwards time machine started and deleted the old copys on the external harddrive.
Weird.

Going from HDD to SSD+HDD

I have a 2010 First Gen i7 desktop iMac computer and am looking rather fondly at SSD drives to run alongside my 1TB Internal HDD. Boot and Apps on SSD, everything else on Internal, the usual set-up.
I know I can change the location of my home folder via System Prefs > Users & Groups > Ctrl+Click User > Advanced Options
What would be the best way to deal with the migration from HDD to SSD+HDD?
Do I do a fresh install onto the SSD and then point to the home folder left over on the HDD and delete the old system files around it?
Does restoring from Time Machine via the Lion install process give me the option of choosing a different disk to send my personal files to? (this would be proffered).
Do I wipe everything clean, restore the OS from time machine, then use Time Machine from the temperary user account to restore my personal files to the HDD?
I do have two external HDDs (time machine and "junk" drive) - do I use the terminal to copy my files to the junk drive (preserving structure and timestamps using the -pR flag), then copy them back onto the HDD once everything is wiped and continue from there?
The last options seems like the most realistic, but the second would be the most proffered (if possible).
What is the best way to do this? Anyone done it before? Anything I should be careful of?
Thanks!

A clone of a HDD will have loads of empty blocks, all those blocks would be written to the SSD...
Incorrect. Most backup programs don't do a block-for-block copy (though some have such an option on very restricted conditions). They copy the files (like cp -rp). So blank space on the source won't be the same blank space on the destination.
But serious question for a moment, do these Carbon Copy Clone drive 3rd party softwares have some kind of special function? Some people have crazy devotion to them and its peaked my interest as to why.
If you want to go through the "exercise" of creating lauchagents or cron tasks for constructing and easily changing scheduling backups, more power to you. I for one just want to schedule the stuff, possibly change the schedule if need be, and move on to more important things like doing the work that actually needs to be backed up! If you don't believe in scheduling periodic backups, well, that's another story.
Though, to be honest, I still question its usefulness when Disk utility does the same thing; select a hard disk ( "TOSHIBA MK2561GSYN Media" on my MacBook Pro), click "new image" and then click go. Then use restore in Disk Ulitity to restore the disk from the image - carbon copy goodness!
So do most other people that do backups, i.e., creating a .dmg (what you get from DU's New Image) is not the way to do backups. DU's Restore, maybe, but I've never used DU for backups.

How to upgrade from HDD to SSD in Mid 2010 13inch MacbookPro?

I am upgrading from HDD to SSD and would like the step by step direction of how to do it on my 13inch MacBookPro mid 2010. Also, I would like to do a clean install of the OS onto the new SSD, and simply transfer my data(i.e. documents, pictures) from the old HDD to the new SSD(Samsung 500GB)
Any detailed directions would be appreciated. You may send responses directly to my address: ******* Thanks in advance
<Edited by Host>

Tolefe1 wrote:
Thanks. How do I booth to IR? Won't I need to connect to the internet to be able to booth to Internet Recovery... Please give steps as I am pretty new to this.
Turn the Mac on (or reboot it) and press command-option-R as soon as you hear the startup chime. Hold the keys down until you see a globe, then release. When the Recovery Menu appears you choose Disk Utility and format the SSD for use in a Mac (Erase>Set Format to MacOS Extended (Journaled), then exit Disk Utility and choose Install OSX
You will need to be connected to the Internet and your Mac should detect your network and ask for a password automatically when Recovery Starts.

Q190 from HDD to SSD?

Hi,
Can I upgrade my Q190 (57312246) from HDD to SSD?
I am looking to purchase the following SSD: http://www.amazon.com/Samsung-MZ-7TD250BW-Series-Solid-2-5-Inch/dp/B009NHAEXE/
Thanks
Solved!
Go to Solution.

hi filippo,
Yes you can use that SSD Samsung MZ-7TD250BW 840 Series Solid State Drive (SSD) 250 GB Sata 2.5-Inch as the Q190 uses a standard SATA 3.0Gb/s, 2.5" wide HDD as per this pdf data sheet.
You may also want to check Crucial's SSD Upgrade for the Ideacentre Q190.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Early 2008 mac pro won't boot from hdd when ssd is installed

I have Mountain Lion 10.8.3 installed on my 1TB HDD in my early 2008 mac pro. That is the only OS install on my mac. I have an OWC SSD formatted but left as an empty drive that I am trying to use but when it's installed my mac hangs on the blank gray screen.
My mac cold boots fine and runs fine when the SSD is *not* installed. When I shut down and put the SSD into a drive bay the mac does seem to boot ok the first time, but when the computer is off for a while it will not boot. It just hangs on the blank gray screen (no apple logo). As soon as I pull out the SSD, the computer boots fine and runs fine again. I am not trying to boot off the SSD, I am booting off the HDD. The correct drive (1tb hdd) is selected in startup disk.
OWC has been helping me and I have tested 3 SSD's. So it does not appear to be a problem with their drive.
The mac will boot into safe mode with the SSD installed. It will boot if I choose the boot drive with the option key at startup.
Mountain Lion was clean installed.
Could it be some sort of library pref or cache issue?
Any recommendations on what to try?

A HT does not find a lot of errors.
It doesn't look for bad sectors or directory or file problems.
Clone your SSD now that you have a clean OS and has the Apple updates on it. Before you make changes.
Install TRIM Enabler 2.2+ on it and any boot volume, to enable TRIM and so that Disk Utility's Repair Disk will trim cells. Mountain Lion Recovery won't which is a shame, so...
Clone and keep bootable backup clone of your system to use for maintenance.
A really bad directory on a system drive will cause interference from booting.
SSDs really need extra care, and even with TRIM, to be repaired from time to time and couple times a year, to do an erase and restore from a current image.
Of course Mac OS system even iwth apps is small and doesn't need to have any data or media and fits on 120GB usually just fine and still have a good enough amount free so TRIM and Garbage Collection can work properly and not get low on free pages. But 20GB free should be the minimum free, and better to have more, at least whatever total amount is written out in a month.

Cloning Hdd to SSD boot drive and what happens with Music/Logic Plugins

Hi, my computer is a mid-2012 Mac Pro 12 Core
It's a great computer but I'm considering upgrading my main boot drive (WD Caviar Black 1TB HDD) to a 1tB Samsung EVO 840 SSD drive (I'm using a sonnet tempo PCI card to mount an SSD that holds audio at the moment and will add another SSD for the boot drive I'm referring to) so I just had a question - if I clone the HDD to the new SSD, what happens with things like licenses for my audio plugins, such as Native Instruments Komplete, programs by IKMultemedia. programs that use an ILOK such as Steven Slate Plugins and also, WAVES plugins? Will this info all carry across to the new SSD drive or do you think I'll need to reauthorise some things? I have all the serials etc so this shouldn't be an issue, but just wondered.
Any help would be appreciated as it feels like quite a big step in that it's my main system drive!
Thanks in advance
Sam

CCC is excellent. If it doesn't work then sure, just always have a safety net of your system that is untouched.
Also, after a clean install, CLONE it!
And then use Setup Assistant. Migration Assistant.
Clone of the system can go on sparse disk images too so you don't have to partition (should have at least one though) and you can have clone from different stages and versions: 10.9.4, without Setup Assistant, migrated, full loaded with all your apps. Multiple versions.
CCC is designed to make a working bootable copy of a system so you can move the system to another boot device like hdd and SSDs without the worry.
But I think we were talking about a system that did not see a clean install of Mountain Lion or Mavericks so it is over due for one!

From hdd to ssd: what about os and all data?

Hello everybody.
I know there are a lot of discussion about it and i read lots of them,
But maybe because english is not my first language, i have some problems in understanding the right things to do.
Also, i am pretty new with mac world as i just have my mb pro since last november.
so i hope you can help me with easy words, thanks.
here's the list of what i have:
- MacBook Pro 2.5ghz, 4gb ram, 500gb hdd
- os x mavericks (installed 2 days ago)
- all my documents/photos/music in my MB Pro
... and:
- crucial ssd 480gb
- an external hd enclosure usb 3.0
- the 17 in 1 tool kit
What do i have to do first?
And how will i transfer/install the os x from hd to ssd? or it "remains" somewhiere in my MB Pro?
I know there is a link from crucial with the procedure for removing hd and installing ssd, is this all i have to do?
Really hope you can help me... thanks in advance!
F.

Follow these steps:
Make certain that you have your data backed up as a precaution.
Attach the SSD to the MBP and open Disk Utility>Erase. Format the SSD to Mac OS Extended (Journaled).
Open Disk Utility>Restore and in the 'Source' field drag the internal HDD from the left hand column.
In the 'Destination' field, drag the SSD from the left hand column.
Click on the 'Restore' button.
Depending upon the amount of data, this process may take a couple of hours.
When finished, restart your MBP holding doen the OPTION key. The display should show the internal HDD and the external SSD (yellow in color). Click on the SSD and if it boots the MBP, the clone has been successful.
Perform the physical swap. Your MBP should be ready to go. All of your data will be on the SSD exactly as it was on the HDD.
Ciao.
Message was edited by: OGELTHORPE

Transferring OS from HDD to SSD using ThinkVantage Tools?

Hi everyone. I recently purchased a ThinkPad T420 from Lenovo and an mSata SSD (80gb) off Newegg. I installed the drive properly and my computer recognizes the drive, etc. Now, when I bought my ThinkPad, I didn't purchase a physical copy of Windows 7 because when I go to college next year, I'll be able to get a super cheap copy (like 7 dollars). So I'm stuck with the problem of getting my operating system from my factory installed HDD to my self installed SSD. How would I go about doing this?
Things I have:
-External Hard drive
-CD-RW discs (made one into a Rescue and Recovery Start Up Disc using the Rescue and Recovery software)
-ThinkVantage Tools
-Patch for Rescue and Recovery
Should I be doing this using Lenovo's built in tools? Also, I was wondering if/how/when I should partition my SSD for my OS. I don't have any experience doing this, but I've read that it's pretty important.
Thank you! I'm still learning, so I appreciate your patience :]

There are a couple of ways to do this, depending on what you want to accomplish. Do you want the OS install on your SSD to be the factory image - as it was when your laptop came out of the box - or do you want a snapshot of your machine at the time you swapped drives (actually just before you swapped drives)?
(obviously, you do either of the below with the original HD in the machine.)
For a factory config, in addition to that Rescue and Recovery start-up disk, you need the full factory recovery media set. You should see an option to burn that set of DVDs in R&R. Whatever you do, it's a good idea to burn these and keep them handy. Once you have the full set, install the SSD, and boot the first DVD. You should then be able to install the factory image.
For an "as-running" image, plug in your external HD. You can choose to put the R&R bootable rescue media on the HD, or you can just use the CD you already made. If you make the HD bootable and it already has data on it you want to keep, watch out for a "preserve existing data" checkbox. Then just save a backup to your external HD. Install the SSD, boot the CD or external HD, and do a restore.
I don't know about the current generation of machines and R&R, but it's been my observation that a full restore from backup restores everything _except_ the factory image in the Q: partition. You will have your full OS and everything you've installed, R&R capabilitites (from within Windows and at boot time) but you will not have the boot time option to restore your machine to factory state from the Q: image. That's what that factory optical media set it for.
If you use the factory media set you burned to set up your SSD, you will have everything including the Q: full image, but of course you will have to reinstall anything that you added to the HD yourself.
You can also do this kind of thing with Acronis, and other utilities. One thing though, if you use a cloning process instead of a backup and restore, make sure that the SSD ( or any target HD or SSD you or another reader is using) is in the ThinkPad when you do the clone. For some reason TPs are very fussy about this. Cloning to an external device, then moving it to the TP generally doesn't work.
Here is andyP 's excellent write-up on using Acronis for this: Hard Drive Clonewars
Re SSDs, there may be things you should do/have to do to get full performance and keep it healthy. I can't help you there.
Good luck,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Going from hdd to ssd

I would like to change a hdd to ssd on macbook pro (mid 2010). If I use time machine backup from old system on new ssd will it be copied with the old disk faults ? I would like to install fresh OS X on ssd, but at the same time I wish to keep aperture librery with all my pictures and iweb where I created my website.
This are my priorities and the rest of data I can move to external hard drive and bring them one by one to new system on new ssd.
Could you please, tell me how to do it and what is best solution ?

A clone of a HDD will have loads of empty blocks, all those blocks would be written to the SSD...
Incorrect. Most backup programs don't do a block-for-block copy (though some have such an option on very restricted conditions). They copy the files (like cp -rp). So blank space on the source won't be the same blank space on the destination.
But serious question for a moment, do these Carbon Copy Clone drive 3rd party softwares have some kind of special function? Some people have crazy devotion to them and its peaked my interest as to why.
If you want to go through the "exercise" of creating lauchagents or cron tasks for constructing and easily changing scheduling backups, more power to you. I for one just want to schedule the stuff, possibly change the schedule if need be, and move on to more important things like doing the work that actually needs to be backed up! If you don't believe in scheduling periodic backups, well, that's another story.
Though, to be honest, I still question its usefulness when Disk utility does the same thing; select a hard disk ( "TOSHIBA MK2561GSYN Media" on my MacBook Pro), click "new image" and then click go. Then use restore in Disk Ulitity to restore the disk from the image - carbon copy goodness!
So do most other people that do backups, i.e., creating a .dmg (what you get from DU's New Image) is not the way to do backups. DU's Restore, maybe, but I've never used DU for backups.

Moving Windows 8.1 from HDD to SSD

Hi! I want to know the best way to move Windows 8.1 from current HDD to SSD. Thanks!
System Information
Model: MSI GT72 2QE DOMINATOR PRO GT722QE-638NL
Product Name: GT72 2QE
OS: Microsoft Windows 8.1 64-bit
Windows Product Key:
HDI Build: ZS7-1781BM4-DS0 3.3.A15.8.0.1
BIOS Version: E1781IMS.10H
BIOS Release Date: 2014/11/21
EC Version: 1781EMS1 Ver5.08, 11/04/2014
CPU: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz
Memory: 16 GB @ 666 MHz
- 8192 MB, DDR3-1600, Kingston MSI16D3LS1MNG/8G
- 4096 MB, DDR3-1333, Samsung M471B5273DH0-CH9
- 4096 MB, DDR3-1333, Samsung M471B5273DH0-CH9
Graphics: NVIDIA GeForce GTX 980M, 4095 MB
VBIOS Version: 84.04.22.00.0c
Drive: HDD, HGST HTS721010A9E630, 931,51 GB
Drive: SSD, ADATA SP900NS38, 238,47 GB
Network: Killer Wireless-n/a/ac 1525 Wireless Network Adapter
Network: Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
OS Activation
Name: Windows(R), Core edition
Description: Windows(R) Operating System, OEM_DM channel
Partial Product Key:
License Status: Licensed

Thank you all for answers. I found a solution:
Tools: 1) Aomei Partition Assistant Pro Edition
2) Paragon Migrate OS to SSD 4.0 ™
First i convert my new SSD MBR to GPT with AOMEI Partition Assistant. After this used Paragon Migrate OS to SSD™ 4.0. Very easy. Time ellapsed ca 30 minutes.
w w w.paragon-software.com/technologies/components/migrate-OS-to-SSD/
w w w.download.paragon-software.com/doc/MigrateOStoSSD_4_manual_eng.pdf
w w w.tomshardware.co.uk/forum/id-1670056/successful-clone-windows-hard-drive-ssd-gpt-uefi.html

MacBook Pro 2011 - Migrated from MBP that had Flash but now it won't work

Does anyone else have a solution to this issue that does not involve doing a fresh install of Snow Leopard? There was another thread in this forum where the OP indicated that they did a fresh install of SL and that solved the issue. However, that solution is not acceptable to me.
I did a system migration from a Time Machine backup (from my old MBP which was also running 10.6.6) when I purchased my new 2011 MacBook Pro last week. All my applications seemed to be working normally until I attempted to watch a YouTube video in either Safari or Chrome. In both browsers, all I get is a black screen where the video should be playing.
I downloaded and installed the latest version of the Flash Player for Safari and I am not able to manually update the Flash Player for Chrome since that browser keeps the Flash Player up-to-date automatically. The black screen persists when attempting to watch a video on YouTube. I cleared the site cache for the Flash Player just in case something was buggy there, but the problems remains.
The last thing I tried was to remove Flash Player for Safari entirely by running the Adobe Flash Player Install Manager and choosing "Uninstall." I then re-installed Flash Player but the problem persists.
Finally, I am not running any third-party firewall software. When I right-click on a YouTube video, the menu says "Movie not loaded..."
Any assistance would be much appreciated!

Created a new user account on the machine and the problem remained when logged in as the new user.
For giggles, I decided to try to pull up a YouTube video on my wife's 2010 MBP. She hasn't been complaining that she was unable to load content. I was astonished to find that Safari on her laptop is exhibiting the same issues that mine is when going to YouTube in Chrome or Safari. . .black screen where the video should be.
I know I haven't changed any configurations on our router, so I doubted that was the culprit. I can't imagine that an ISP would block YouTube, of all things. To rule these things out, I went back to my laptop and tethered it to my 3G smartphone. Still, even using the cell network, YouTube videos are "blacked out."
Also, I run several VMs, so I tried loading YouTube in Chrome and IE in Windows 7 and they both exhibit the same problem. At this point, I'm dumbfounded that both mine and my wife's MacBook Pros have the same problem when connecting to different networks and the problems persist across OS'es.
Any other suggestions you can think of aside from making a trip to the Apple Store?

Migrating from HDD with bad sectors to SSD

My mid-2010 Macbook pro running OSX 10.6.8 (Snow Leopard) has been extremely slow. It passes Disk Utility's Verify Disk step but when I brought it to the Apple store, it failed the diagnostic tests they ran with their ethernet cable. There were bad sectors detected and they figured this was what was slowing me down.
So I decided to switch to an SSD but I have questions about how to restore my files. I tried cloning my HD to an external drive with both Disk Utility's restore and using asr on the command line. In both cases I get an error at the very end
"Checksum failed. Could not restore - cannot allocate memory"
I'm still able to boot from the external drive that was created though. I was also (recently) able to create a Time Machine backup with no error messages. So my question is
1. What is the best way to restore my files?
a) Using the (possibly corrupt) HD clone
b) reinstalling from the OSX Installation DVD and restoring with Time Machine
c) Something else like Carbon Copy Clone

montburns,
Only by doing file-by-file examination against a known good copy, or relying upon a batch process which generates a “I couldn’t copy these” file list (and in the latter case, presuming that the list is due solely to bad sectors).
It means i) — either to put your internal drive in an external enclosure, or to attach it to a SATA-to-USB or SATA-to-FireWire adapter, then connecting it to the appropriate external port, and then using Startup Manager to select it as the boot drive.
If you have appropriate software, you could, but I’m not familiar with what’s available on OS X — I hope that other people can offer a list of apps from which you could choose.
Between ddrescue and rsync, I’d choose ddrescue for copying from a potentially faulty disk. To my knowledge, rsync will just copy whatever it finds; but if it creates a list of “I couldn’t copy these” files, then that could be a way to find out where bad sectors might be having an effect.

Migrating from Arch to Dual Boot (Arch 64 + Win8.1 64).

Hello my friends.
I used to have a dual boot system (MBR, if I'm not mistaken), with Arch Linux on hda (1TB) and Windows 7 on hdb (300GB). I did this installation more than 3 years ago.
The disk with windows died recently, and because I need it for work (virtual machine is not an option), I decided to make a "refresh" on my machine.
I bought two new disks, a 240GB SSD and a 3TB HDD.
What I would like to do is to install both Windows 8.1 and Arch Linux on the SSD disk (100GB for Windows, 140GB for Arch, my main system), and use the 3TB (for Arch) and the 1TB (for Windows) disks as storage.
While doing a research on how to do the installation, some questions arised.
I know that I must (or at least should, for make the processe easier) install Windows first. I will install in the EFI mode, as my machine alread has it.
1. Which boot loader I should use when installing Arch Linux?
From what I'd read, to keep things simple, I should opt for a bootloader like gummyboat, that will recognise the Windows without manual intervantion. Is this right?
2. Will I have problems with the Windows Update?
I read here https://bbs.archlinux.org/viewtopic.php?id=187194 that when Windows update, it mess with the EFI partition and will make the Arch stop booting (the boot will enter directly on Windows). Is this correct? Is this related only to "automatic" updates (and manual updates can be made without problem)? There is any way to avoid this?
3. After installing both systems, will Arch Linux recognize my 1TB disk?
My 1TB disk has my actual Arch linux installation, and data. I would like to copy this data to the 3TB disk and then, under Windows, format it to serve as my Windows storage disk.
I can do this BEFORE installing the system, or after. But the second option causes me some concerning regarding the rights and so on, so that I do not know if my "new" system" will be able to copy things from the old system.
Should I make the copy before installing Arch Linux?
I think this is it.
If you could helping me with these questions and pointing problems/flaws with my approach, I'll be immensely gratefull.
Chhers,
Eduardo.

Hello elken
While I could maintain the system under BIOS/MBR, and I don't had any problem with this in the last 2 years, I want to change my system to EFI/GPT.
I found that Windows under EFI must be under GPT (As pre-installed Windows 8.1), while under BIOS it must be under MBR. So, as my system is (will be) a DUAL one, and It is not a MAC system (that would allow to the EFI/GPT loader to chain a BIOS/MBR, I have to choose between EFI/GPT or BIOS/MBR.
Because my system can be setup under EFI/GPT, and because sooner or later BIOS/MBR will start to disappear, I want to change it now. This will mke it easier in the future to upgrade my system, I think.
Not to mention that GPT has some nice advantages over MBR. For example, GPT can handle my 3TB disk without problems, while MBR not. (At least, fdisk wasn't able to deal with it).
So, you could say that despite BIOS/MBR being fully funcional right now, it's a matter of personal taste (and learning) to me, this desire to completely change my system to EFI/GPT
For now, I decided to mantain the LINUX and WINDOWS separated (as they are now), i.e., on separate disks. This should solve the problem of windows messing with the boot loader when upgrading (point 2).
About the bootloader, I think I'll change to gummybot, to test it. I think I could still use grub 2 (I'm not entirely sure), but Gummybot seems simple and fair enough.
As an aside, I think I will try to migrate my system to the new HDF using rsync and making the necessary adjustments (like in fstab).
It seems not to difficult, and there are many documents out there on how to do this.
When I finish, I'll post here how I did and what worked and what not
Cheers,
Eduardo

Upgrading from HDD to SSD

I received a HP 2000 2b43dx laptop as a gift. I increased the ram from 4GB to 8GB but that did not help the performance very much. I realize that the performance is limited mostly by the cpu which is AMD E-300 running at 1.3 MHZ. I don't think it is possible to easily upgrade the cpu so I would like to replace the 320GB 5400 rpm HDD with a Samsung 840 EVO 250GB SSD. It looks like Samsung data migration software should work ok for cloning the existing HDD (except it does not carry over the OEM recovery partition). I made a USB copy of the recovery partition and since I have recently upgraded from Win 8 to 8.1 I hope I never have to go back to square 1 with the recovery partition.
First limitation for the upgrade is that I have SATA II instead of SATA III but that is not supposed to be a major limitation. Second limitation is that apparently HP consumer laptops such as mine have a locked BIOS so it is not possible to activate AHCI through the BIOS. Also device manager only displays AMD SATA controller and no AHCI SATA controller. I was hoping that this would not be a major problem because supposedly the Samsung Magician SSD management software allows to you to manually manage the SSD performance. BUT when I read the user manual for Samsung Magician:
(http://downloadcenter.samsung.com/content/SW/201401/20140128164030078/Magician_English_Installation_...
The Magician manual (page 5) states that it does not work with AMD chipsets with AMD drivers which my model has. This is a major limiting factor because use of the magician software is critical for making sure the SSD is working correctly. Is it possible to switch from AMD drivers to Microsoft or Nvidia drivers so I can use the Samsung Magician software? Any references to sources and methods would be appreciated.
This question was solved.
View Solution.

Don't overthink it. The BIOS is set to ahci by default and invisibly. Windows 8 and 8.1 manage SSDs natively so there is nothing you really need to do. Clone the old drive to the new and go. The only thing to be careful about when you are cloing is not to shrink the sytem reserved partitions. If you do that things like Windows Backup, which use the system reserved partition, will no longer function and if the system partitions are shrunk too much the system will fail to boot. That can be repaired with a repair disk but it is a pain you want to avoid. So use a manual clone option and keep all but the main C:\ partition the same size.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Migrated from HDD to SSD, booting but rc.sysinit borked

Similar Messages

Maybe you are looking for