Migrated using PST, problem with replying to old mails now

Hi,
we have migrated from Exchange 2007 to Exchange 2013. We built a new Exchange 2013 organization with new Active Directory... All new :)
After exporting all mailboxes to PST's, we imported them using new-mailboximportrequest...
Everything works fine except answering older mails.
When the recipient was inside the old Exchange Organization, Outlook sends back an NDR, that the recipient could not be found.
When we choose the recipient again from Outlook Addressbook, then it works.
How can i now update all old mails with the right recipient information ?

Hello,
Is there any update?
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Similar Messages

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

Error in PST migration using PST Capture tool

Hi, I'm trying to migrate some local PSTs to our Exchange Online mailboxes. We have all Office 365 Small Business.
I've tried to use PST Console with Agents correctly installed on the domain PCs, I installed the console on my PC and I see all of them. Just for test purpose, I'm leaving the other computers alone, and trying to migrate my personal PST to my own online
mailbox (I installed the agent on my own pc, of course).
I configured PST Console as described on the Technet article https://technet.microsoft.com/en-us/library/hh781035.aspx , using my account (I'm the administrator) - and the "Check password and connectivity" says it's all ok. I've disabled UAC and
my local user is in the Administrators group.
When I try to import my pst to my mailbox, after a while the process terminates saying "Import error: Error opening PST file". The log file reports as follows:
16:59:07.181|Debug |Provider |1 |OpenPSTFile: C:\PST\f487cccd-87d8-4231-a25a-2f410230b982.pst
16:59:07.181|Debug |Provider |1 |OpenFile: C:\PST\f487cccd-87d8-4231-a25a-2f410230b982.pst
16:59:07.191|Debug |MapiAccess |1 |CreateProfileAndLoadPST RedGateMapi42_{CAEC6B45-4BF4-466E-A019-76DECFB8D342} on C:\PST\f487cccd-87d8-4231-a25a-2f410230b982.pst
16:59:07.191|Info |MapiAccess |1 |Initialize
16:59:07.201|Error |MapiAccess |1 |Initialize failed to MAPIInitialize : 80004005
16:59:07.201|Error | |1 |HRESULT c004ab03 in function RgMapiAccess::CreateProfileAndLoadPST, line: 389, (file RgMapiAccess::CreateProfileAndLoadPST)
While doing this Outlook 2013 (32-bit) was closed, and also was OWA.
I've searched the internet for information and found that someone else have encountered this error, but so far I've found no good solution.

From the Exchange online control panel I can see and modify all the mailboxes, thus I guess I have full access.
The manual pst import works well.
As a side note, in the Exchange control panel, I've seen that I have delegate access to the mailboxes I've tried to import (mine too), so I think I have the right permissions and the program has successfully set it.
Now I have another problem: I was doing another import attempt, but when I try to select the remote mailbox clicking on "Set mailbox..." link, now the list is empty, showing "No mailboxes foud for Exchange Online". I tried to re-enter
my credentials and close/reopen the program but it still stays empty. Yesterday it showed all my company mailboxes.
I'd like very much to use this tool, but I'm seriously thinking to do the migrations one by one manually...

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

PST Migration using PST Capture tool 2.0

Hello,
I am planning to use Microsoft PST Capture 2.0 tool to import PST's located on C: Drive of users to personal archive mailbox of the respective user in the on-premises exchange 2010 mailbox.
There are total of 16000 users. I am wondering will PST Capture Tool, be able to handle this huge requirement? Based on past experience, can anyone suggest me healthy practice of planning PST migration using PST capture 2.0?
Any help on this will be highly appreciated.
Thanks in advance.
Kapil

Make sure you spec the PST Migration server properly, also, the number of PST files is not the problem, It's the size of all the PST files.
From my experience keep an eye on the disk space because If you are using a DAG once you start the migration the DB log files will be massive and you will need to run full backup to clear them so make sure you run backups every 12 hours to clear the logs.
If you batch them each night to a reasonable number your environment can handle everything should be fine.
Cheers
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone or iPad.

Have an older 17 MacBook Pro, running OS 10.5.8. Software update says everyting is current. Mac doesn't have iCloud, preferences still shows MobileMe. Just bought new iPhone 5S. Mac won't recognize phone, says I need newer version of iTunes. Have no problem with computer recognizing old phone 3 or 1-1/2 year old iPad. I suspect I need to update OS, but as software update isn't telling me to do so, can I? What version would I need to go to?

Your MacBook Pro can be updated to run Mac OS X "Snow Leopard". Buy it. That will enable you to run the latest iTunes version.
Online (US): http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Online (UK): http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
Germany: http://store.apple.com/de/product/MC573/mac-os-x-106-snow-leopard
Elsewhere: call the phone number in the Apple Online Store
Apple's price is $19.99, £14.00, €18.

Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

Had problem with laptop so reinstalled it now itunes will not sync on both laptops, it did before.

Had problem with laptop so reinstalled it now itunes will not sync on both laptops, it did before to my iphone5 says cannot sync to 2 libraries until I reinstalled it did.

iDevices can only be synched with one library. However, you can sync successfully with more than one computer if each has a copy of the same logical library - the identifier that iTunes uses to determine which library is synced an iDevice is recorded within the iTunes database (the iTunes Library.itl file). The best approach is to replicate your complete library (database, media, artwork, associated files) from one PC to the other. When you reinstalled iTunes on your laptop it will, by default, have created a new library with a distinct id from that of your other machine. Even if you copied all your media from one to the other, iTunes will still see the libraries as distinct with respect to syncing iDevices.
If you have configured iTunes to organize your media and to copy files to the iTunes Media folder, then the complete library will be contained within (by default) C:\Users\username\Music\iTunes, with a structure of subfolders and key files like this:
If this is the case, you can (with iTunes not running on either machine):
Copy this iTunes folder from laptop 2 to laptop 1 (the one that's had iTunes reinstalled) - depending on the size of your library you can do this over a network, using a thumb drive, or an external (USB) hard driveNote this this assumes no media on laptop 1 that's not also on laptop 2 - if this isn't the case, there's a slightly different process to follow to ensure that this media is preserved and can be added to the "common" library
Once the copy is complete, make sure that iTunes is using the correct library database by holding down SHIFT as you start iTunes. When you see this prompt:
select Choose Library..., navigate to the iTunes folder you just copied, select the iTunes Library.itl file you'll find there, and click Open.
For future reference, you can use turingtest2's user tip on Backup your iTunes for Windows library with SyncToy for a suitable method to backup your library to an external drive - you can then, with care, use this to keep the copies of your common library in sync across your laptops.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Having serious problems with calendar duplications, one birthday now showing 174 times on one day! Help!

Problems with attached documents in Mail and Docs To Go

Hello everybody.
I've found a problem with attached documents in Mail. In fact, if I click on attached documents with .doc (microsoft office word 97-2004) and files in .docx Office Open .xml, the iPad doesn't open them, also if I click in "Open with Docs To Go (which should support these files' format)".
How can I do? There's an application or another way to open these files?
Other Informations:
Docs To Go version: 5.2.2

Update the patch to the Sapgui.
Regards,
Ignacio.

I had problems with my laptop which have now been fixed but I cant access my itunes account or download itunes

I had problems with my laptop which have now been fixed but I am now unable to download or connect to my Itunes account through any of my devices?

An iTunes account is nothing more than a login and password.
The media is only where the user put it. Restore the ENTIRE iTunes folder from the backup of the computer.

ZCM Personality Migration install causes problems with apps

We have just started using ZCM and after users have the agent installed, we are pushing out the Personality Migration installation the next time they login.
We have found that this is causing is strange issues with various applications after the user logs in and receives the personality migration software. It is happening on some, not all, of the workstations. All of the workstations have the same OS version and application version.
So far, we have had a problem with our records management application, Accutrac, after the Personality Migration installation. The users cannot connect to the SQL database until we restore the application's ini file with the proper database connection settings.
Then we had users that couldn't open MSWord. We had to delete their normal.dot.
The latest problem occurring today was Outlook. Multiple dll files were missing and we had to reinstall the application.
We've never seen such a strange situation.

efc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Migration assistant restore problem with time capsule

Hi People,
I have the weirdest of all problems. Let me explain what happend and you will be as amazed as I am now.
======
I have been using a 2TB time capsule for about a year and a half now. Every day for 18 months everything was being backupt. Everything smooth no problem.
My 27" iMac needed a fresh install at home because I have been upgrading from SL to Lion and thing got a bit odd. So this is what I did in a nut shell.
1. Bought a new 27" iMac Quad core with 12 Gb ram etc. (I bought it for my office)
2. At home started up the new iMac and the migration assisant asked me what I wanted.
3. Did a full restore from the TC and all my user data was restore to the new iMac!
=== Hurray so far, evrything worked liked it should.===
This was my test, now I was confident to erase my "old" iMac and do a full Lion reinstall and then use migration assisant to restore all files.
It worked with the new iMac so nothing to loose.
So I erased the new iMac, boxed it again and took it to the office.
Now It was time for my old iMac to be reinstalled.
=====
4. So I erased my "old" iMac.
5. Did a clean Lion install from DvD.
6. Did all software updates (as I had done with the new iMac).
7. started Migration Assistant
8. Pointed to the time capsule and did everything like the day before
9. Got an error message.
=====
***?? I tested this it should work. Now ALL my data is gone. All my movies, honeymoon, kids growing up, etc etc etc etc.
Everything gone gone gone!
So now I can browse to the TC and see the sparsebundle file. It is 1.5TB. I can show package contents and see the files, I can go into the "Bands" dir. and see a bunch of files. But I can not repair, mount, use disk utils with the sparsebundle.
The data must be in the 1.5 Tb file but I have no way of accessing it.
I need some good advice / help from someone because my whole family history is gone at this moment .

Woxxxxxx wrote:
My 27" iMac needed a fresh install at home because I have been upgrading from SL to Lion and thing got a bit odd.
That's usually the last thing to try. Depending on what was wrong, simply installing a fresh version of OSX would be likely to fix it. If not, finding and addressing the actual problem would probably be much better than starting with the "nuclear" option.
5. Did a clean Lion install from DvD.
6. Did all software updates (as I had done with the new iMac).
7. started Migration Assistant
It's much better to use Setup Assistant when your Mac first starts up after installing OSX, to prevent Problems after using Migration Assistant.
9. Got an error message.
Was that the "some backups cannot be opened" message? If so, try to repair them, per #A5 in Time Machine - Troubleshooting.

Viewing Excel Files using Tomcat - Problem with caching

Hi all,
A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
<%@ page contentType = "application/vnd.ms-excel" %>
<%
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setDateHeader("Expires", 0);
response.sendRedirect("file1.xls");
%>
This all works except but I'm having one big problem.
The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
Any help would be greatly appreciated.
Thanks.

I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
Eg.
http://myserver/returnSVG.do#1234567
where 1234567 is a timestamp / random.
Not sure whether you can do this on a file based URL... but maybe worth a shot...
regards,
Owen

Migrated using PST, problem with replying to old mails now

Similar Messages

Maybe you are looking for