Migrating dynamic NetConnection()s

Anyone blogged any examples of migrating Flex 1.5's dynamic
NetConnection() objects with user-defined event handlers to handle
events generated by server-side applications hosted on FCS 1.5 by
extending Flex2's "sealed" NetConnection() class in AS3?

from http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn511510.html#wp234040
"Configuring an Access Point's Prestandard Power Setting
An access point can be powered by a Cisco prestandard 15-watt switch with Power over Ethernet (PoE) by entering this command:
config ap power pre-standard {enable | disable} {all | Cisco_AP}
A Cisco prestandard 15-watt switch does not support intelligent power management (IPM) but does have sufficient power for a standard access point. The following Cisco prestandard 15-watt switches are available:
•AIR-WLC2106-K9
•WS-C3550, WS-C3560, WS-C3750
•C1880
•2600, 2610, 2611, 2621, 2650, 2651
•2610XM, 2611XM, 2621XM, 2650XM, 2651XM, 2691
•2811, 2821, 2851
•3631-telco, 3620, 3640, 3660
•3725, 3745
•3825, 3845
The enable version of this command is required for full functionality when the access point is powered by a Cisco prestandard 15-watt switch. It is safe to use if the access point is powered by either an IPM switch or a power injector or if the access point is not using one of the 15-watt switches listed above.
You might need this command if your radio operational status is "Down" when you expect it to be "Up." Enter the show msglog command to look for this error message, which indicates a PoE problem: "
Also from the same url:
Enhanced PoE switches-Enhanced PoE switches (such as the Cisco Catalyst 3750-E Series Switches) can be used with 1250 series access points to auto-negotiate a power level in excess of 15.4 W per port.
It is my understanding (correct me if I am wrong on this) that the switch power subsystem/supply can only dole out so much power either per port or overall regardless what the controller indicates.
Cisco power calc tool: http://tools.cisco.com/cpc/
(requires login)

Similar Messages

  • Hyper-V 2012 R2 - live migration dynamic memory issue

    Hi..
    we use a two node hyper-v cluster.
    On each node running 5 vm that shared the 64GB system memory.
    The vms are configured to use dynamic memory. The sum of the startup (min) memory of the 10 vms are currently 50 GB.
    So now our problem:
    If we try to drain roles on node A for maintenance purpose two vms are still on node A because they wasted currently each 25GB memory and so on node B is not enough free memory to host this vms.
    That sounds logical
    But as all vms configured to use dynamic memory they should shrink their memory to get enough space for all vms? If we shutdown all vms, move it to one node, then everything works fine.
    Is it by design that live migration do not trigger the vm to shrink their memory?
    Best regards, Alexander Zirbes

    Hi Alexander,
    Dynamic memory means that memory can increase or decrease based on the demand of the VM, not based on the load of the Hyper-V host. If the gust OS of VM dont need that much memory, memory will be released. I dont think live migration has any role shrinking
    the allocated memory of a VM.
    Since you are using two node cluster, you should only load 50% resourses on each host so that incase of a failure of second node, the first node can have all the VMs.
    This calculation will become more effective if you have more nodes. I am having a  six node cluster and I load each host upto 80% so that in case of a single node failure, the VMs can be split on other five nodes without issues.
    Cheers,
    Shaba
    Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
    InsideVirtualization.com

  • LIve migration trigger on Resource crunch in Hyper-v 2012 or R2

    Like VMware DRS , who can trigger Migration of virtual machine from 1 datastore to another or 1 host to another. do we have same kind of machanism in Hyper-v 2012 also.
    i have five HYper-v 2012 host in single cluster. now i want if any host face resource crucnh of memory than it migrate the virtual machine on another host.
    Thanks ravinder
    Ravi

    SCVMM has a feature called Dynamic Optimization.
    Dynamic Optimization can be configured on a host group, to migrate virtual machines within host clusters with a specified frequency and aggressiveness. Aggressiveness determines the amount of load imbalance that is required to initiate a migration during
    Dynamic Optimization. By default, virtual machines are migrated every 10 minutes with medium aggressiveness. When configuring frequency and aggressiveness for Dynamic Optimization, an administrator should factor in the resource cost of additional migrations
    against the advantages of balancing load among hosts in a host cluster. By default, a host group inherits Dynamic Optimization settings from its parent host group.
    Dynamic Optimization can be set up for clusters with two or more nodes. If a host group contains stand-alone hosts or host clusters that do not support live migration, Dynamic Optimization is not performed on those hosts. Any hosts that are in maintenance
    mode also are excluded from Dynamic Optimization. In addition, VMM only migrates highly available virtual machines that use shared storage. If a host cluster contains virtual machines that are not highly available, those virtual machines are not migrated during
    Dynamic Optimization.
    http://technet.microsoft.com/en-us/library/gg675109.aspx
    Cheers !
    Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
    InsideVirtualization.com

  • Commdirmig

    What is the correct procedure for migrate the messaging from schema 1 to schema 2. ? I install JES 2005Q1 . I try to migrate from messaging 5.2 schema1 to messaging 6.2 schema 2. I migrate messaging from 5.2 to 6.2 with schema 1 and the It work.
    I try to execute all the step in migration guide ( schema 1 to schema 2 ) but I have problem with delegated admin gui interface ( don't work with the domain migrated , dynamic group that the commdirmig don't add to schema2. )
    ANy Ideas?
    TIA
    Bye Giovanni

    The old delegated admin is depracated. You have to migrate to the delegated admin that comes with the Access Manager that ships with JES. There are two components of the new DA, one is a command line interface, accessable through the tool commadmin, and the other is a web-based interface. Read the following:
    http://docs.sun.com/app/docs/doc/819-0114
    and
    http://docs.sun.com/app/docs/doc/819-0056
    That should get you started.
    Note that from an engineering standpoint, the old DA used Schema 1, which relied on domain information being stored in the "o=internet" suffix. All that information is migrated into your existing root suffix with comm_dirmig when you migrate to Schema 2.

  • PAB to Address Book server dynamic migration

    I'm using JES3, 2005Q1.
    I was able to apply the batch migration from PAB to Address book server as described in the Communications Express 6 2005Q1 Administration Guide. In the same chapter (Chapter 7), the dynamic migration is described. This migration happens only when the user logs in.
    In the documentation it is stated that there is an attribute called "mepabmigration". This attribute is essential for dynamic migration. But I couldn't figure out how to get this attribute, as it is not predefined nor there is a description on it anywhere.
    Any idea about this? especially the mepabmigration attribute.
    Regards,

    "attribute" implies LDAP.
    http://docs.sun.com/app/docs/doc/819-2661/6n4uetjt7?q=mepabmigration&a=view
    This attribute is added automatically.... Nothing for you to do, here.

  • Dynamic computers collection based on User State Migration associations

    At our company, we have a group of computers with the follwoing situation:
    User works on machine with WindowsXP, there is already prepared new machine, with Windows 7 installed, and delivered to user. I have prepared 2 task sequences - "State Capture" and "State Restore", both deployed to separate device collections.
    Now, what I do is create old/new computer association in the User State Migration tab, add old computer to Capture collection, let the TS complete, add new computer to Restore collection, and let the TS complete. After all these steps user can begin to work
    on the new machine with his/her profile and data migrated.
    But I would like to speed things a little bit, and allow my
    colleagues to perform such "migration" by simply adding computers association. To achieve that, I need to create a query, that would assign computers to collections, based on the existing associations in the User State Migration tab. The problem is,
    I fail to find appropriate rule in query wizard. Is it possible at all?
    I need computer to be added to Capture collection upon detection of it being source computer in the USM tab, and removed from collection upon finished TS, with the target computer added to Restore collection at the same moment and removed from the collection
    upon finished restore TS.
    I would greatly appreciate any help or pointing into right direction.

    Hi,
    There is a blog about removing computer from collection after SCCM task sequence. But it is for SCCM 2007. You could have a look on this blog to see if the script can be edited to meet your requirements.
    Remove computer association from collection
    after SCCM task sequence
    Note: Microsoft provides third-party contact information to help you find technical support. This
    contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Modification Dynamic Rule - SAP Migration - Quality Level

    Hi Experts!!
    Could you tell me if I can have the same quality level for one material when I do a SAP Migration? For example, currently we are working in the release 4.7 and my quality level for a specific material is in the step n. 6 and our total cycle are 10 steps. My doubt is when I will be working in the new version (5.0) I can start my quality leve from step n. 6? Or is it mandatory to start from step n. 1 again?
    I don´t know if my doubt is clear but I would like to thank you for help me in this issue.
    BR
    Valdevair

    No when you transfer data from one client to other or in SAP Migration,Quality level will never be as that of the old.It will reset no doubt.
    What you can do is
    1.Create all master data like DMR with  Task list   etc
    2.Get the database of old system with current quality level with combination of Vendor-Material.
    3. Run the QDL2 with some LSMW for combination of the Vendor & material.
    4.Reset the level to desired level.
    I hope this will add some value

  • Perfomance review Cursor and dynamic SQL

    Hi every one ,
    I searcher over internet and oracle forums for what is the best for my case.
    I tried to rebuild indexes . I had two methods , Both working fine but I am looking for what is better from performance point of view
    1- using Cursor like in the below link .
    http://www.think-forward.com/sql/rebuildunusable.htm
    2- Using Dynamic SQL , which generated script file then run it.
    spool rebuildall.sql
    select ' alter index '|| owner||'.'||index_name ||' rebuild online; '
    from dba_indexes where status='UNUSABLE';
    spool off;
    @rebuildall.sql
    Thanks in advance . Your help is appreciated.

    Hi ,
    Thanks for your input . We had some customer which they have a lot of row chaining and migration , I need to increase PCTFREE
    with move command . As result of this command indexes becomes unusable as you know . So there are monthly tables become chained with wrong definitions in PCTFREE and INTRSAN.
    I used the above script as help my time and solve problem faster ,It is only when I need it ,So it is not scheduled or something like that .
    I'm looking for anything will help and simplify the work .

  • Exchange server using interface IP after migrating from 8.2 to 9.1

    hi,
    i recently upgraded an ASA pair from 5510 (ASA OS 8.2) to 5512 (ASA OS 9.1). Many of the services are working fine including VPN after some tweaking and modifications in the new configuration, however the exchange server is not sending the traffic from its designated public IP which is mentioned in NAT statements. Exchange is using the public interface IP of the firewall for outbound communication. If i try to telnet from outside to the public IP addresses of the exchange server its giving proper response. kindly help me with this issue. i believe this is some NAT related issue.
    OLD configuration (relevant part only)
    access-list out_in extended permit tcp any host 213.42.201.35 eq www 
    access-list out_in extended permit tcp any host 213.42.201.35 eq https
    access-list out_in extended permit icmp any host 213.42.201.35
    access-list out_in extended permit tcp any host 213.42.201.35 eq smtp 
    static (DMZ,outside) tcp 213.42.201.35 www 172.16.2.200 www netmask 255.255.255.255
    static (inside,outside) tcp 213.42.201.35 https 192.168.190.57 https netmask 255.255.255.255
    static (DMZ,outside) 213.42.201.35 172.16.2.11 netmask 255.255.255.255
    access-list out_in extended permit tcp any host 213.42.201.34 eq smtp 
    static (DMZ,outside) 213.42.201.34 172.16.2.21 netmask 255.255.255.255
    New Configuraion
    object network obj-172.16.2.21
     host 172.16.2.21
     description Created during name migration
    object network obj-172.16.2.11
     host 172.16.2.11
    access-list out_in extended permit icmp any host 172.16.2.11 
    access-list out_in extended permit tcp any host 172.16.2.11 eq smtp 
    access-list out_in extended permit tcp any host 172.16.2.21 eq smtp
    nat (inside,outside) static 213.42.201.35 service tcp https https 
    object network obj-192.168.0.0
     nat (inside,outside) dynamic interface dns
    object network obj-192.168.0.0-01
     nat (inside,DMZ) dynamic 172.16.2.254 dns
    object network obj_any
     nat (inside,outside) dynamic obj-0.0.0.0
    object network obj_any-01
     nat (inside,DMZ) dynamic obj-0.0.0.0
    object network obj-172.16.2.21
     nat (DMZ,outside) static 213.42.201.34
    object network obj-172.16.2.11
     nat (DMZ,outside) static 213.42.201.35 service tcp smtp smtp 
    regards
    Najeeb

    Hi Najeeb,
     If  you are able to reach out to your SMTP via Public IP address , 172.16.2.11 will be using public IP address 213.42.201.35 for mail delivery (SMTP service alone) . Server 172.16.2.21 will be using Public IP address 213.42.201.34 for any traffic including SMTP , to double check this open your IE on your 172.16.2.21 google it for what is my IP address , you will see your public ip address 213.42.201.34 on your google results .
    At any point time your both server will never use your outside interface for any external communication
              The issue is exchange is sending the outgoing traffic via the outside interface of my firewall (213.42.201.46).
    HTH
    Sandy

  • Dynamic view creation in Flex

    I am new to  Flex web applications and I am doing research to see if functionality
    contained in an existing web application can be replicated in a Flex web app.
    We currently have a JSP / Struts based web application that creates a data entry
    web view dynamically based on information that describes the different widgets and
    their view locations as recieved from the application backend.  We are looking at
    migrating this application and this functionality to Flex.
    When User X selects 1 of any number of data entry views, the Flex application would
    receive data from the back end that  contains information describing the different widgets
    to display on the dynamic view: what type of widget to display ( text field,combo, line,
    box, etc), the pixel specific positional information as to where each widget exists in the
    view.  These data entry views are not something the Flex developer designs or knows
    what to expect from the backend. Flex has to generate the view on the fly based on the
    information that describes the view.
    The question:  I fully expect there to be coding within the action scripts; before trying to
                         learn how to do this, is this something that Flex support.  
    Thanks,
    Brian

    Yep, we do something similar. We had to build out the infrastructure, but It works fine. E.g.,
    var bDesc:XML = <button x="10" y="5" label="hello world" color="red"/>
    var b:Button = new Button();
    b.label = bDesc.@label;
    b.x = bDesc.@x;
    b.y = bDesc.@y;
    b.setStyle('color', b.@color);
    addChild(b);
    In your app, the actual description (XML or other format) would be coming from the server. Then you just add it to the display list (and wire in any event handlers if necessary). In a real setting, you'll need error checking and a more formalized way of doing this, but it works reasonably well. No major snags.

  • Hyperion Financial reports-taking long time to open after migrating to 9

    Hi,
    Financial reports version 7 are migrated to system 9.
    Problem that we are facing now is that reports take ling time to open.
    Can anyone suggest how to improve the performance .
    before migration to system 9 financial reports was working fine but now it is taking a long time to open

    Are they taking a long time to open in the studio or in the workspace?
    There could be lots of reasons:
    Have there been server changes with the migration?
    Have there been any changes in dynamically calculated dimensions?

  • HTML generated by PLSQL not working when migrating from 9i to 10g

    Hello everybody,
    We migrated a 9i database (web+application server on Windows) to 10gR2 (web+application server on Linux). The database contains a package that dynamically generates HTML and JSP tags .
    Problem: the HTML code generated in 10g by the package is different by the HTML code generated in 9i. The package generating the html in 10g is identic, equal with the package generating html in 9i. We also receive a the following message error in 10g when loading the web page in 10g:
    " 'Style' is null or undefined". It seems there is a problem with the Style object.
    Anybody has seen something similar, because I am not very familiar with HTML and JSP.
    Any help will be appreciated.
    Thank you, Daniela.

    Thank you for your reply.
    Yes, it's done using MOD-PLSQL version 10.1.2.0.2.
    I did as you said: compared the 2 generated HTML files. It's not that it doesn't generate all tags. It generates all tags but some of them are different, that is it screws them up.
    Here it is some example code.
    For example, in 9i I have the following code:
    div id=div_plus_GENERALE style="cursor:hand; display:none;"
    <td> width=8 </td>
    <td id=butt align=left style="font-family:Verdana,Tahoma;
    font-size: 10px; font-weight: 400; color: '#ffffff';
    background-color: '';
    "onClick="if (butt_clicked) butt_clicked.style.cssText=restore_butt_style;
    butt_clicked=this; restore_butt_style=butt_off_lit;
    this.style.cssText=butt_on_lit;
    var x = document.getElementById('Freccia_' + freccia_old);
    x.style.display = 'none';
    Freccia_sitointer_anagrafica_anagrafica_cliente_punto.style.display='block';
    freccia_old='sitointer_anagrafica_anagrafica_cliente_punto';"
    onMouseOver="this.style.cssText=butt_on_lit;"
    onMouseOut="if (butt_clicked != this) this.style.cssText=butt_off_lit;">Anagrafica Fornitura</td></tr>
    <tr>
    <td height=2></td>
    </tr>
    </table>
    In 10g the HTML code looks like this:
    div id=div_plus_GENERALE style="cursor:hand;"
    <td width=8> </td>
    <td align=left style="font-family:Verdana,Tahoma;
    font-size: 10px; font-weight: 400; color: '#ffffff';
    background-color: '';">
    <a href="sitointer.anagrafica.anagrafica_cliente_punto target="frameCenter"
    onClick="var x = document.getElementById('Freccia_' + freccia_old);
    x.Style.visibility='hidden';
    Freccia_sitointer_anagrafica_anagrafica_cliente_punto.Style.visibility='visible';
    freccia_old='sitointer_anagrafica_anagrafica_cliente_punto';"
    onMouseOver="this.style.cssText=butt_on_lit;"
    onMouseOut="if (butt_clicked != this) this.style.cssText=butt_off_lit;">Anagrafica Fornitura</a></td></tr>
    <tr>
    <td height=2></td>
    </tr>
    </table>
    At this point I don't know what should I investigate next.
    Thank you very much.
    Daniela

  • Dynamic  report generation

    We are migrating our client reports from crystal reports to business object reports and I need your help on how to achieve the below functionality in Business object reports.
    Requirements
    1. We need to generate and deliver around 30,000 statements to clients (mostly ftp and email) from 300 Webi report templates.
    2. This has to be a complete automated process with no user intervention.
    For example: Using Webi / Deski Report1, we need to run the report for each client account and then generate a statement and deliver it to client (only client specific data). Web1 reports are complex and some might take 30 to 60mins for generation.
    Questions
    1) Can it be done by just using BO tools with out coding ( using any .net sdk)?
    2) Can a single BO server handle the load, If not How to load balance reports generation and delivery across multiple servers?
    3) How to dynamically pass parameters to Webi report without coding?
    Thanks for reading my post. Any help/ suggestion is appreciated.

    In our current architecture, 
    1) We use crystal report templates and pass dynamic datasets at runtime to generate multiple client statements.
    2) For load balancing, we have 6 app servers with crystal runtime installed and we distribute load across the servers using custom code.
    My question is if use BO enterprise will there be any performance enhancements?

  • Creating and Binding View Objects dynamically : Oracle Jdeveloper 11g

    Hello,
    We are trying to create and bind view objects dynamically to adf data visualization components.
    The view object is a result of multiple tables.
    We are using Oracle JDeveloper 11g Technical Preview. ( can't upgrade to TP2 or TP3 now).
    We have found this : http://radio.weblogs.com/0118231/stories/2003/07/15/creatingUpdateableMultientityViewObjectDefinitionsDynamically.html on our search for the same.
    The sample application however, is in 10g , hence required migration.
    Also, it was a standalone application with the TestClient.java having a main() method.
    Our requirement is for Web Application; we use Adf+jsf .
    Guidance of any sort is very much appreciated.
    Thanks in advance.
    -Anil Golla

    Hi,
    there also exist a forum for JDeveloper 11: JDeveloper and OC4J 11g Technology Preview
    What you are trying todo is not trivial because you need to not only dynamically create the VO, you would also dynamically need to create the binding meta data for it (assuming you use ADF). Not sure if the API to modify the binding is public, so posting it on the JDeveloper 11 forum bears a glimpse of hope for an answer
    In JDeveloper 10.1.3 you can't do this
    Frank

  • Migrating from Informix to Oracle 11g

    Hi,
    I have downloaded the Migration workbench, and the plug-ins Inofrmix7.jar from http://www.oracle.com/technetwork/topics/index-095746.html. Kindly could you please tell me from where i can download the ifxjdbc.jar. Are these files same with different name.
    Regards

    Hello,
    What you need is the Informix Dynamic Server JDBC Driver, version 1.4 JAR file, ifxjdbc.jar.
    This driver is shipped with the Informix Dynamic Server software. I am not sure you can download it freely.
    Regards,
    Jean-Patrick

Maybe you are looking for