Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

Hello,
Currently we are in the midst of migrating all of our report for one of our main application from CR 9 to CR11 R2. The entire migrating, importing, as well as publishing for tall the report runs smoothly. We even can view the report once we called up the report from the repository to be displayed in its infoview. But my question is:
1. Is there any way that the report can auto adjust its size once the report been print out? This is because I believe in CR 9, ( we are using RAS9 btw) once printe out; the report will be automatically adjusted, different than the CR 11 which is WYSWYG. This has caused some of the report layout been out-of-margin as well font sizing are not the same anymore (sometimes big and sometimes too small) and not the same as per old (CR 9 version) report.
With this explanation, it is hope you guys or any of your team can give me some solution or advice on how for me to cater this problem.
2. Another thing that I need to clarify with you guys is does CR 11 being supported by Printronix 5000 series of printer? This is because when the same title report when being generated from CR 9 and CR 11 both will come out in a different output/ result.
CR 9 is a readable but yet in CR 11 which I believe is a WYSWYG Windows Generic Text driver report application wonu2019t be able to print out nicely as some of the font is smudge and not readable. If this is the case, I need a clarification from you guys as whether the printer is being supported or not?

Hi Daniel,
Where are you seeing the differences, in Crystal Reports or through BusinessObjects Enterprise? If it's from BOE, make sure you have the Printronix printer driver installed on the Page Server machine, and that the Page Server service is running under a domain account that has local admin rights.
Regards,
Wallie

Similar Messages

Switched from Cox cable to Comcast and now printer problems

I would like to buy a new printer. Which printer is compatible with comcast? LIke I said, never had this problem before. It is wifi, and comcast should recognize it. It's not worth the time, considering how cheap printers are.

Unless you really want a new printer, you only need to set up your current one. You would still have to set up the new printer, just like you need to do with your current one.
You don't mention what kind of internet setup you have. That information would go a long way in helping us help you. What we need to know is what kind of modem/router setup do you have?

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

Bought a new iMac migrated from a time machine backup and it didn't load contacts music etc

my 4 year old imac died. So we got a new 1Tb intercore i5 imac. Migrated from the time machine backup and it didnt populate itunes or contacts or photos. Am I missing something?

You should have imported the data in Setup Assistant when you first booted the new machine. If you used Migration Assistant instead, you now have another user with all the data from the old machine.

I just migrated from one Mac to another and I got a msg to contact Adobe tech support and report error code 150:30. What do I do?

I just migrated from one Mac to another and I got a msg to contact Adobe tech support and report error code 150:30. What do I do?@

Reinstall the software properly. Migration is useless due to the specifics of the activation system.
Mylenium

Upgrade from Elements 7 to Elements 11 poses printing problems

I upgraded from Elements 7 to Elements 11 and now when I print a photo using Elements 11 it is extremely dark (almost black). I am using an Epson R1900 Photo printer and the same settings for printing in both Elements 7 and 11 and can't figure out why the pictures are too dark in Elements 11. Can anyone help with this?

Thanks for the ideas:
Yes, printing in the OS Print program (Windows 8) does produce better
photos than directly through Elements 11. Also, printing from the Elements
Organizer produces the better photos I am looking for and can obtain from the
Editor in Elements 7. I still wonder why the Elements 11 Editor produces
almost black pictures? But at least I have some alternatives for printing
better photos after I have used the Editor and saved the corrected photo.
Corvettelarry.
In a message dated 1/14/2013 8:19:44 A.M. Eastern Standard Time,
[email protected] writes:
Re: Upgrade from Elements 7 to Elements 11 poses printing problems
created by andaleebfatima1
(http://forums.adobe.com/people/andaleebfatima1) in Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4991885#4991885)

Migration from Reports 6i to AS10g and rwservlet

Okay, somehow I managed to delete my last post, so I'm trying this again...
I have a legacy application that I am trying to migrate from Oracle 9i (with reports 6i) to Oracle 10g db and AS10g (running on a Windows 2003 server). Our current reports are being run via CGI (rwcgi60.exe). The oracle documentation says that in 10g this is only supported for backward compatibility and it recommends the use of rwservlet instead.
I have spent the past two days reading both the oracle documentation and other information I have found on the web. I have turned off SSO, modified the cgicmd.dat file to incorporate our key mappings and have modified the REPORTS_PATH environment variable in the registry. I believe things are configured correctly as I get a response when calling the following URL from a browser:
https://www.mydomain.com:2121/reports/rwservlet/showenv
I am also able to generate one of our custom reports by issuing either of the following URLs:
https://www.mydomain.com:2121/reports/rwservlet?mykey+REPORT=cyprtl+DESFORMAT=PDF+P_ASOFDATE=01/19/2010+P_CLI_CODE=ALS+P_CMU_CODE+TONS+P_FUN_CODE=ALS+P_METRIC_FLAG=N+P_PRO_CODE=ALDENC+P_SESSION=113289+P_TRA_ID=36239+P_TRA_CODE=AS321
https://www.mydomain.com:2121/reports/rwservlet?mykey&REPORT=cyprtl&DESFORMAT=PDF&P_ASOFDATE=01/19/2010&P_CLI_CODE=ALS&P_CMU_CODE&TONS&P_FUN_CODE=ALS&P_METRIC_FLAG=N&P_PRO_CODE=ALDENC&P_SESSION=113289&P_TRA_ID=36239&P_TRA_CODE=AS321
The application that we use to generate reports previously submitted the request to the CGI server via an html form (example below). I have modified the code so that the form action is "https://www.mydomain.com:2121/reports/rwservlet?" rather than "https://www.mydomain.com:2121/reports/rwcgi60.exe?".
<HTML>
<HEAD>
<SCRIPT TYPE="text/javaScript">
function displayRpt() {
alert ("bozo");
document.forms[0].submit();
</SCRIPT>
</HEAD>
<BODY onLoad="displayRpt();">
<FORM ACTION="https://www.mydomain.com:2121/reports/rwservlet?" METHOD="POST" TARGET="_top">
<INPUT TYPE="hidden" NAME="mykey" VALUE="">
<INPUT TYPE="hidden" NAME="REPORT" VALUE="cyprtl">
<INPUT TYPE="hidden" NAME="DESFORMAT" VALUE="PDF">
<INPUT TYPE="hidden" NAME="P_ASOFDATE" VALUE="01/19/2010">
<INPUT TYPE="hidden" NAME="P_CLI_CODE" VALUE="ALS">
<INPUT TYPE="hidden" NAME="P_CMU_CODE" VALUE="TONS">
<INPUT TYPE="hidden" NAME="P_FUN_CODE" VALUE="ALS">
<INPUT TYPE="hidden" NAME="P_METRIC_FLAG" VALUE="N">
<INPUT TYPE="hidden" NAME="P_PRO_CODE" VALUE="ALDENC">
<INPUT TYPE="hidden" NAME="P_SESSION" VALUE="113289">
<INPUT TYPE="hidden" NAME="P_TRA_ID" VALUE="36239">
<INPUT TYPE="hidden" NAME="P_TRA_CODE" VALUE="AS321">
</FORM>
</BODY>
</HTML>
Unfortunately, just modifying the form action call does no work on 10g.
Instead I get the following error messages:
REP-771: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
I do not believe it to be a compilation issue, because as stated above I can invoke the report with the URL syntax.
Any help would be greatly appreciated.
-Stephen
Edited by: user8562081 on Jan 20, 2010 3:21 PM

Roberto,
Thanks for the reply, but the issue is not with the port number. After installing AS, I created a virtual host with port number 2121 and secured it with SSL. As mentioned in the post, I can successfully test the report server with the following URL: https://www.mydomain.com:2121/reports/rwservlet/showenv
-Stephen

Migrating from Local Database to OpenDirectory, and Migrating IMAP Boxes

I have a Xserve G5 running 10.4.11 and using a local (non shared) directory with all of my users on it. I'm planning to install a new Xserve (10.5.2) to use as a Fileserver and Filemaker Server, essentialy leaving the mail service to the G5. However, i want to use the OpenDirectory on the 10.5 server in order to maintain only one user database. I'Ve tested out the functionnalities and it looks like that there is no problems using the 10.5 OD with my 10.4 server, however, since 90% of my users are using IMAP mailboxes, i cannot migrate the database to the new users
Example:
On the local directory of the 10.4 server, i have a user called Wiggum using IMAP mailbox, working fine. I tell my 10.4 to use the OD on the 10.5 server (user Wiggum already configured over there with the same settings, passwords) and when i remove the user from the local directory, leaving only the OD, the user is working OK, mail is working fine but i loose all contents of my IMAP box, i get only the new mails.
Is there a way to migrate the IMAP boxes from the users on the local directory when i migrate them to the new OD.

I would think the first shortname is different in OD vs. the local user. Thus, creating a second mailbox and this is why you see only new incoming mail.
Check if you have "duplicate" mailboxes. If yes, you could copy mail from one to the other and reconstruct the mail database.

Migration from Solaris 9 to Solaris 10: Memory fault problem

We are facing to migrate appication from Solaris 9 to Solaris 10,
Compilation was not a problem, but while running the application it is raising the following fault,
tail of truss
Incurred fault #5, FLTACCESS %pc = 0x100025CA8
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
Received signal #10, SIGBUS [default]
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
core analysis show that the fault occurs at different points for different runs.
Please let us know if there is a patch to solve the same.
Thanks & Regards

Sorry i should have mentioned it as migration from Solaris 8 to Solaris 10.
Other info: In solaris 8 we compiled using -m32 and on Solaris 10 we are using -m64.
We had never tried on Solaris 9.
i just tried compiling on Solaris 9, i got the same error as in Solaris 10.
I tried to find using dbx but it crashes at different points for different runs.
First Run by pointing connection string - schema 1
dbx m2 core
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddClient(0xffffffff7ffff0c0, 0xffffffff7ffff2f0, 0xffffffff7ffff1d4, 0x373300, 0xff0000000000, 0x8080808080808080), at
0x100025ca8
[2] DBSERV_RadReadProxyClients(0x1, 0x10002599c, 0x0, 0x0, 0x0, 0x0), at 0x10006106c
[3] ClientInitialise(0x1, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000263e8
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff600, 0xffffffff7ffff5f8, 0xffffffff7ffff5f0), at 0x10002bd4c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2aa5, 0x10cf000, 0x20000000, 0x1, 0x8), at 0x10000c5d0
Second run by pointing Connect-string to Schema 2:
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddReplyMessage(0xffffffff7ffff1d8, 0x6564006d69732d63, 0xffffffff7ffff200, 0x656400, 0xff0000000000,
0x8080808080808080), at 0x10002e458
[2] DBSERV_RadReadRadiusReplyMessages(0x10002e348, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000700a4
[3] RadiusReplyMessageInitialise(0x1000b0538, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x10002e2dc
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff5f0, 0xffffffff7ffff5e8, 0xffffffff7ffff5e0), at 0x10002bc3c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2c29, 0x1be400, 0x20000000, 0x1, 0x8), at 0x10000c5d0

HT4993 Hi I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

Hi
I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

Did you request that Sprint unlock the phone?
If so, did they? Did you follow the process to complete the unlock by restoring as new?
Did you get the message indicating the iPhone is unlocked?

Adobe Photoshop CS6 and Canon printer problem!!

Use Photoshop CS6 to edit and print (try to print) to a new Canon Pixma Pro-100 printer. Photoshop is up to date and the Mac runs OS 10.8.5 - Canon printer driver is current at ver. 11.7.1.
When I print from Photoshop to the Pro-100 (let's say a 4X6 landscape snapshot to 4X6 borderless paper) the printer starts up and moves the paper out about 4 inches and then prints the
first two inches of the image, stops and ejects the paper!. I've tried different versions of printer the printer driver and made sure every things is up to date. However, I can print from MS Word,
Nikon Capture NX2, or Canon's own Print Studio Pro and it works fine. Canon is no help because if it works OK with their Print Studio Pro then it's not their issue - I tend to agree with them.
The same thing happens print from Photoshop to 5X7 or 8X10 paper - it gets ejected so far and then only prints part of the image. I've searched the Internet and posted in Forums but can't find
where any one would have the same problem. What I'm hoping for here is someone at from Adobe who's knows Photoshop tech stuff will post here with suggestion because there is no more
phone support for Photoshop CS6. I'd like to really keep this printer and get Photoshop to work with it but if I can't I'm going to offer it up free to a good home! JM Davis

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

Black and white printing problem on Epson Artisan 50

When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
What I have found by searching is this quote:
"Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

WRT300N and network printer problems

I have a pc wired into the router and a printer wired into it as well, they work fine. I have a laptop that can access the router wirelessly and it can get out to the internet. When I use the laptop to try and find the printer using the printer setup wizard its not found on the network, all i get is the microsoft windows network option. The Printer is an HP 7780 model and has the wireless option, went with the the cable to try and limit complications. Any help with this would be greatly appreciated.
Thanks.

Depending on the operating system (Windows XP) go to the control panel and click on the Network Wizard and set up both computers and during the wizard it will give you the option to enable File and printer sharing. After you set up your network you should be able to see the other PC and printer from each printer. Also make sure you have TCP/IP enabled by clicking on start>control; panel>Network connections and right click on the LAN (wired or wireless depending on which one it is) and clicking on properties. In there make sure TCP/IP is checked. You may have to install any software on each PC that came with your printer.
Richard Aichner (Ikester)

OS10.8 and HP printer problems

I'm having problems printing wirelessly with my MacBook Pro OS10.8.4 and my HP Officejet Pro 8500A.
Initially I had no problems at all. However now, I can print in colour, but each time I select black and white printing the printer crashes (lights flashing and a message to turn the printer off).
HP have been very helpful and replaced the printer. It worked fine for a while, but now it's happening again. Interestingly, I have no problems printing using my MacBook Air under OS10.7.
Any ideas?

I would recommend that you first update the firmware on the printer by using the download at the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-94588-3 &cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
After that, go into system preferences and select Print & Scan. Right click the rectangle listing your printers and select "Reset Printing System"...Warning: this will delete any other printers installed.
After that, go to the following link and download the most recent version of software available for your OS and printer: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108394- 1&cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
Install that and let me know if it helps.
Best of luck,
Kyle

Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

Similar Messages

Maybe you are looking for