Migrating individual applications.

Is there anyway to migrate only specific applications from one Mac to another and not the entire drive? I am dealing with a 17" Powerbook that recently had it's hard drive wiped with a clean install of Tiger. Two of the programs on it were Photoshop CS2 and Adobe Bridge. It's been so long since I installed the programs that I cannot find the installer disc. I have the programs installed on my G5 tower and tried dragging and dropping their respective applications folders, but I am unable to launch either program doing it that way. Adobe gives me the license to install the program on two machines so it's not like I'm pirating it or anything, I'd just like to be able to migrate it back over to the Powebook. Any suggestions?

Because those programs install components in various areas on your hard drive in addition to the application itself I'm afraid just dragging over the application will not work. You will need to find your installer disk.

Similar Messages

  • Securing Individual Application Express Application

    Hi All,
    I would like to secure an individual Application Express application at the Apache level. What I am looking at doing is ensuring that only an individual URL is available on a specific port. I was wondering what is the best way to do this.
    Eg:- Users are allow to navigate to
    http://mysever.somedomain.com:7799/apex/f?p=101
    NOT to http://mysever.somedomain.com.:7799/apex/f?p=4550
    Thanks
    Brett

    My recommendation is to install HTML DB in the instance that has the data you need in your application. We have a test and production database for each "type" of database. Our types of databases are OLTP and Data Warehouse. This results in two test databases and two production databases. We have HTML DB installed in each of these database instances. We use a test Oracle Application Server's HTTP server to serve the 2 test HTML DB installations and a production OAS HTTP server to serve our 2 production HTML DB installations.
    Reasons for 4 HTML DB installations
    - We wanted the application as close to the data for quickest response time!!
    - We wanted to keep it simple by not having to deal with database links. Database links are only used when the application requires the combination of database from different sources.
    - We wanted our test/development application work separated from the running production applications.
    - We have IT people as well as non-IT people in other departments developing applications, so we wanted the production HTML DB installation controlled by IT people. Non-IT developed applications are migrated into production by IT people. The IT people control all database structure changes as well in the production database.
    This is what we went with. Our developers provided this configuration to the DBA to implement. Sometimes there is a battle as to how many HTML DB installations to make. The developers want more and the DBAs want less.
    Mike

  • OIM11gR2 - How to migrate an Application Instance Form

    Hello,
    I'm trying to migrate an Application Instance Form from my Dev env to my QA env.
    My target system is SAP
    I performed the following steps in Dev:
    1. Installed and configured the SAP Connector (no problem here)
    2. Created a sandbox
    3. Created an Application Instance
    4. Created the Application Instance Form
    5. Ran a target reconciliation to confirm everything is working properly
    6. Exported the sandbox
    7. Published the sandbox
    8. Via Deployment Manager I exported all objects related to SAP (Resource object, Process Forms, Lookups etc.)
    In QA I did:
    9. Installed and configured the SAP Connector (no problem here)
    10. Via Deployment Manager I imported the objects related to SAP
    11. Imported the sandbox
    Problem:
    To my surprise, the Application Instance does not have a Form in the QA env.
    I had to create it manually by performing the following:
    12. Create a sandbox
    13. Open the Application Instance definition
    14. Click on create (to create a form)
    15. Entered the same name I used in my Dev environment
    16. Received an error message saying that the form already exists
    17. Entered a different name for the Form
    18. Saved
    19. Exported the sandbox (to import in Prd)
    20. Published the sandbox
    21. Ran a target reconciliation to confirm everything is working properly
    I tried to reproduce the problem with another (test) destination environment because I don't want to have the same problem when migrating to Prd.
    I repeated the steps 9,10,11 except that I imported the sandbox exported from QA (step 19) instead.
    The same problem: Application Instance definition has no Form attached to it in my test destination environment.
    If I try to create the form with the same name, it gives an error message saying it is already there.
    Is my procedure wrong?
    Is there an official procedure explaining how to migrate only Application Instance Form from one env to another?
    My env:
    OS: Windows 2008 R2 SP1
    OIM: 11gR2 BP7
    SAP connector: 9.1.2.2.0
    Thanks,
    Adr

    This is a bug: Bug:16027176
    Check the [Article ID 1515225.1] which proposes a workaround that might be useful in your case (it was not in mine).
    In short the workaround is:
    The following order should be observed to export :
    - IT Resource & Application instance in one xml
    - Request DataSet in another xml
    - SysAdmin Sandbox (the one defined while creating the Application Instance and the Form)
    - Identity URL Sandbox (defined while customizing the fields on the Form, in the Catalogue page)
    Adr

  • Info : Migrating Apex Application from Non-SSO to SSO environment

    Hi All,
    This post is to share my experience while working on APEX. This may be useful to some apex developer.
    If we migrate an apex application from a non-sso (i.e. http) to sso (i.e. https) environment, the flash chart doesn't work.
    I found that in the source of a Flash Chart region, we use #HOST# variable to locate the swf file. The environment variable takes the correct path but with "http" as prefix. But to access application pages "https" is used. Because of which, the swf file couldn't be located by the application.
    Work-around Solution : If I hard code the value i.e. the application path having "https" replacing #HOST# variable then the flash chart works fine. I couldn't found a way by which the #HOST# parameter value can be updated to take "https".
    The same environment host other non-sso applications as well.
    Any comments on this are welcomed.
    Regards,
    Mangal

    Hi Dirk,
    Thanks for the reply.
    As I mentioned earlier, by Non-SSO I mean "http" and by SSO I mean "https". This is because, before migration the application was accessible using "http" and now we have to use "https" alongwith SSO to access the application. I only want to highlight the Flash Chart issue with this migration.
    The problem doesn't solves with your solution as I am getting correct instance/environment name with #HOST# but prefixed with "http" and not "https". Hence the application won't be able to locate the required swf file.
    Even the workaround I mentioned is only feasible, if an application has only few Flash Charts. However, if there are large no. of Flash charts in an application, then it would be a tedious task to update all flash chart source either by an application item (as you mentioned in your post) or hard coding the path itself. Also, every new Flash Chart source needs to be updated by a developer to fix this.
    A better solution is required by which the Flash chart source is not touched and the #HOST# variable for the application is updated to take the "https" prefixed to the swf file path.
    Regards,
    Mangal
    Edited by: Mangal on Mar 5, 2009 11:31 PM

  • Migrating an application from JDev 10.1.3 to JDev 10.1.3.2

    Hi,
    I am having trouble migrating an application made with JDev 10.1.3 to 10.1.3.2.
    Everything is fine when I run it on the embedded OC4J, but when I try to deploy I have problems.
    The application is deployed on OAS 10.1.3R3.
    What I have done so far was to install the new ADF libraries using ADFinstaller, editing server.xml as per Note:417812.1 and include adf-faces-api.jar, adf-faces-impl.jar, jsf-api.jar, jsf-impl.jar and adfshare.jar from JDev 10.1.3.2 to my project WEB-INF/lib folder.
    Some pages are working as they should, but when a date is to be displayed I have this error:
    javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.timestampValue()Ljava/sql/Timestamp;So, am I missing some jar to be included? Have I missed a step or two?
    Thank you for your help.
    adsm

    Solved.
    For some reason, once the application has been migrated, the following lines were added to orion-application.xml:
        <imported-shared-libraries>
            <import-shared-library name="adf.generic.domain" min-version="10.1.3"></import-shared-library>
            <remove-inherited name="adf.oracle.domain"></remove-inherited>
        </imported-shared-libraries>
    -------I do not know if the migration tool was directly responsible for this. Anyway, as this project has been migrated time and time again from a JDev version anterior to 10, this kind of thing was bound to happen someday.
    Cheers,
    adsm

  • IPhoto worked initially on new iMac with yosemite then I did a migrate of application only now it won't open

    I have new iMac retina display.  I manually loaded my photo library from old mac, it asked to upgrade library I said yes and it all was working fine. Then I did a migration on applications only from my older macbook pro 17 inch and now I am getting
    I have trashed iPhoto and reinstalled it and it still gets this error
    I have reloaded the old photo library I still get this error message.
    Help please
    Thanks

    To answer your questions so others can use this post.
    In my broken
    NyxAudioAnalysis.framework file on the new iMac Yosemite
    I only had a file called headers and it was broken.
    I copied the
    NyxAudioAnalysis.framework file
    (which had 3 files like your example above.)
    from my old mac and then after making a copy of the broken one 'just in case' I inserted the copy from my old mac and iPhoto worked.

  • Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    No. Only those Apps that are not installed on the new will migrate over.

  • HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

    In the past I have always been able to adjust the memory of each individual application,
    my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
    How do I boost the amount of memory that Illustrator uses so I can complete my project?

    With OS X, it automatically allocates RAM and it can't be allocated manually.
    What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
    How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
     Cheers, Tom

  • Support document for Migration of application fro flex 2 o flex 3

    Support document for Migration of application fro flex 2 to
    flex 3

    I'm sorry to hear that you are having problems. A few APIs
    did change from B3 to final, but you should be getting compile
    errors for those. I can assure you that all of the areas you
    mentioned were tested and are working for many folks so if you can
    supply examples of what isnt working we can try to get you back up
    and running.

  • Migrate tomcat application to oc4j

    hello,
    i want to migrate an application built with jsp and structs from tomcat to oc4j.
    where can i found documentation about that?
    regards,

    hi
    tank you Shay Shmeltzer.
    I see http://www.oracle.com/technology/products/adf/learnadf.html.
    after make configuration in server.xml (tomcat) i see
    http://radio.weblogs.com/0118231/stories/2003/08/08/installingTheBc4jToyStoreOnApacheTomcat4124.html.
    When start application in tomcat we have this message :
    Failed to checkout SRService application module. Ensure your datasource name is SRDemo [case-sensitive!] and that connection settings are properly defined for a database with the SRDEMO schema installed. See server log for more exception details...
    Tank you
    Alfredo Queiros

  • Migrate planning application without migrating Provisioning information

    Hi,
    Is it possible to migrate just Planning application and other Hyperion objects without provisioning information. which we can assign as per new requirement.
    will it work or need to migrate provisioning information first then we can change later as per our requirement.
    This time MSAD Provider should connect with different host.
    Please advice.

    I understand that planning application contain provisioning information of Planning application in shared services and should be migrated along with Planning.
    My question was:
    Is it possible to migrate planning application only and then i should able to either re provisioning everything from scratch for migrated planning as we had bad experience with existing provisioning.
    though i have seen some option of update/delete in CSSImport (importexport.properties)
    please advice.

  • Migrating struts application from 10.1.2 to 10.1.3.1

    I've tried migrating my struts application from using JDev 10.1.2 to 10.1.3.1. When I try to open up the struts-config.xml file, I get a Java runtime exception error. I am using JDK 5.0.60.5. I'm not sure how to fix this....
    Message
    BME-99004: A Java runtime exception has occurred.
    Cause
    This exception should have been dealt with programmatically. The current activity may fail and the system may have been left in an unstable state. The following is a stack trace.
    java.lang.ClassCastException: oracle.adfdt.controller.struts.diagram.db.shape.StrutsDataActionNode
         at oracle.adfdt.controller.struts.diagram.shape.StrutsPageLink.connect(StrutsPageLink.java:79)
         at oracle.bm.diagrammer.shape.BaseDiagramEdge.validate(BaseDiagramEdge.java:3176)
         at oracle.bm.diagrammer.registry.RBaseShape.validate(RBaseShape.java:788)
         at oracle.bm.diagrammer.BaseDiagram.validateOnLoad(BaseDiagram.java:6436)
         at oracle.bm.persist.diagram.impl.BaseDiagramReader.loadDiagram(BaseDiagramReader.java:141)
         at oracle.bm.diagrammer.BaseDiagram.loadDiagram(BaseDiagram.java:1381)
         at oracle.adfdt.controller.diagram.PageFlowDiagram.loadDiagram(PageFlowDiagram.java:108)
         at oracle.bm.addinUtil.IDEAppContext.buildDiagram(IDEAppContext.java:2269)
         at oracle.bm.addinUtil.DiagAppPanel.buildDiagram(DiagAppPanel.java:50)
         at oracle.bm.addinUtil.IDEAppContext.openLoad(IDEAppContext.java:3735)
         at oracle.bm.addinUtil.IDEAppContext.open(IDEAppContext.java:3368)
         at oracle.adfdt.controller.diagram.PageFlowEditor.open(PageFlowEditor.java:82)
         at oracle.ideimpl.editor.EditorState.openEditor(EditorState.java:239)
         at oracle.ideimpl.editor.EditorState.createEditor(EditorState.java:147)
         at oracle.ideimpl.editor.EditorState.getOrCreateEditor(EditorState.java:90)
         at oracle.ideimpl.editor.SplitPaneState.canSetEditorStatePos(SplitPaneState.java:231)
         at oracle.ideimpl.editor.SplitPaneState.setCurrentEditorStatePos(SplitPaneState.java:194)
         at oracle.ideimpl.editor.TabGroupState.createSplitPaneState(TabGroupState.java:103)
         at oracle.ideimpl.editor.TabGroup.addTabGroupState(TabGroup.java:275)
         at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1261)
         at oracle.ideimpl.editor.EditorManagerImpl.createEditor(EditorManagerImpl.java:1196)
         at oracle.ideimpl.editor.EditorManagerImpl.openEditor(EditorManagerImpl.java:1131)
         at oracle.ideimpl.editor.EditorManagerImpl.whenOpenEditor(EditorManagerImpl.java:2332)
         at oracle.ideimpl.editor.EditorManagerImpl.handleDefaultAction(EditorManagerImpl.java:1893)
         at oracle.ide.controller.ContextMenu.fireDefaultAction(ContextMenu.java:343)
         at oracle.ideimpl.explorer.BaseTreeExplorer.fireDefaultAction(BaseTreeExplorer.java:1576)
         at oracle.ideimpl.explorer.BaseTreeExplorer.dblClicked(BaseTreeExplorer.java:1913)
         at oracle.ideimpl.explorer.BaseTreeExplorer.mouseReleased(BaseTreeExplorer.java:1934)
         at oracle.ideimpl.explorer.CustomTree.processMouseEvent(CustomTree.java:176)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Action
    If further errors occur, you should restart the application.
    Also, report the problem on the JDeveloper forum on otn.oracle.com, or contact Oracle support, giving the information from this message.
    ________________________________________________________________________________

    Yes, but the application under 10.1.3 points to the application.jws file in the old 10.1.2 directory.
    I want the application to point to the .jws file JDeveloperApplication/<application>/<application>.jws.
    10.1.3 keeps this pointer somewhere and would like to change it. I scanned the jdev directory for files containing <application>.jws, and found it in the binary file jdev/system/oracle.jdeveloper.10.1.3.36.73/system.sys file, and the ide.properties file, and the system/oracle.ide.10.1.3.26.73/windowinglayout.xml file.
    None of these files seem to be the place to make the adjustments.
    I guess the more general question for me is "How should JDeveloper be configured to allow for migration of applications? (It does not seem to be a no-brainer!) How should it be configured when additional libraries have been included in the list libraries of prior JDeveloper version and need to be migrated/duplicated to a new version of JDeveloper? How are connections supposed to be migrated (for database, cvs, application servers)? How should JDeveloper be configured for team use? (Each member of a team should maintain identical JDeveloper configurations. Yes?)"
    But, first things, first. How do I point a JDeveloper application to a different .jws and application directory?

  • Migrating VB Applications on SQL Server to Oracle Forms on Oracle 10g RAC

    Hello All,
    I am looking at migrating a VB application built on a SQL Server database across to an Oracle Forms deployment with the data migrated to an Oracle 10g RAC database environment.
    My first question is whether the SQL Developer Migration Workbench can migrate the SQL Server data to a RAC environment?
    The second question is to ask whether there are any "toolkits" or tips from the community migrating VB applications to Oracle Forms.
    Any advise or suggestions greatly accepted.
    Kind Regards,
    Gary.

    SQL Developer Migration Workbench definitely can migrate SQL Server data to Oracle RAC setup.
    However, I don't think VB application can be easily converted to Oracle Forms.
    You can post your question in Oracle Form forum to double check.

  • Error after deploying a migrated JDeveloper application

    I am migrating an application from JDeveloper 9.0.3.4
    to Jdeveloper 10.1.2(Buid 1811). When I test the application in Jdeveloper 10g, it runs well. After deploying the application in IAS 10g (9.0.4.1.0) I attempt to log into the application and I get the following error:
    500 Internal Server Error
    java.lang.NoClassDefFoundError: oracle/jbo/http/ORDRegisterer
    at oracle.jbo.html.HtmlServices.registerORDrenderer(HtmlServices.java:612)
    at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:299)
    at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:133)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:242)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:536)
    Has anyone come accross this problem?
    How can it be fixed?

    Yep, I had the same problem deploying from JDeveloper 9.3.1, followed:
    http://www.oracle.com/technology/products/jdev/howtos/10g/adf_runtime_update_howto.html
    and it works! thanks for the clue! (now I only have to find out what ADF is now!)
    Carlos.

  • Migration of application from Oracle Express 6.3.4 to Essbase 9

    I got a requirement to migrate an application from Oracle Express to Essbase.Can any one help me if there is any documentation for migration or else do I have to rebuild a new application in Essbase with the same functionality as in Oracle Express.
    Rgrds,
    G.K

    As far as I am aware there is no migration tool to convert to essbase and you will have to build a new application in essbase.
    On a side note this campaign from Oracle back in 1998 amuses me - http://books.google.co.uk/books?id=4VEEAAAAMBAJ&lpg=PA17&ots=Amg-YO3m5X&pg=PA17#v=onepage&q&f=false
    The line "Oracle Express Server slaughtered Arbor Essbase in both load and calculation times and query times" is a classic.
    I wonder if Oracle feel the same way now :)
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for