Migrating Oracle data to SQL

I am receiving the following error message when attempting to migrate Oracle data to SQL Server 2008. The migration tool being used is SSIS 2008 wizard. Only a few table objects are impacted by this migration.
Thank you in advance for your assistance.
ERROR:
Data Flow Task: OLE DB Destination [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.

Sorry, but we can't help you. This is a forum for Migrations from Foreign Databases (like SQL Server) to Oracle, using the Oracle SQL Developer Migration Workbench.
SSIS is a Microsoft product, and your migration is going the other direction, so you need to ask in Microsoft forums.
I just googled for "Cannot retrieve the column code page info from the OLE DB provider", and there were several hits in MSDN.
Regards
Wolfgang

Similar Messages

How to load oracle data into SQL SERVER 2000?

how to load oracle data into SQL SERVER 2000.
IS THERE ANY UTILITY AVAILABLE?

Not a concern for an Oracle forum.
Als no need for SHOUTING.
Conventional solutions are
- dump the data to a csv file and load it in Mickeysoft SQL server
- use Oracle Heterogeneous services
- use Mickeysoft DTS
Whatever you prefer.
Sybrand Bakker
Senior Oracle DBA

Migrating Oracle Databases to SQL Server 2000

Hi friends,
I wanna to Migrating Oracle Databases to SQL Server 2000.
But i don have idea abt that.
could u plz help how to start and procced.
Neeraj Goel

Hi Neeraj,
This forum is dedicated to Migrating from SQLServer and other third party databases to Oracle.
Not the other way round.
The Oracle Migration Workbench facilitates migrations to Oracle.
Regards,
Dermot.

SSMA Console - Migrating Oracle 11g to SQL 2012

Hi there!
I have two questions related to migrating data from Oracle to SQL.
1) I have an Oracle database with several schemas. At the time of the connection SSMA loads all objects for all schemas presented in Oracle, which takes 1 hour to finish. Is there a way at the time of the connection to limit it to load only
the schema I want to work?
2) In case I want to extract, for example, 2 tables only. How do I prepare the script below to accept another table name?
I tried using a comma and repeating the command "$OracleSchemaName$.MySecondTable" but, didn't work.
<migrate-data object-name="$OracleSchemaName$.MyFirstTable"
                  object-type="Tables"
                  write-summary-report-to="$SummaryReports$"
                  report-errors="true"
                  verbose="true" />
Thanks.
Marcio

Hi Malisaqin:
Thanks for replying.
I've been through all articles related with SSMA but couldn't find any explanation for my questions.
For my second question I had to repeat the same node for as many tables I have. I'm still doing some tests with another variations to see if I can get it working.
The link you sent is about using the UI and not the Console application.
Thanks,

Oracle Date in SQL Statement.

Hello,
    We are having performance issues with some reports using conditions on date fields in the Record Selection Formula. Our application does not use the time portion of the date fields very often. When Crystal Reports builds the SQL statement to Oracle it uses a range condition to include all the possible time values. This practice makes a big difference compared to a direct condition
     Example:   SELECT "TABLE_A"."ID"
                       FROM   "TABLE_A"
                       WHERE ("TABLE_A"."DT">= TO_DATE('2011-03-31 00:00:00','YYYY-MM-DD HH24:MI:SS') AND
                                      "TABLE_A"."DT"< TO_DATE('2011-04-01 00:00:00','YYYY-MM-DD HH24:MI:SS'))
     Is there a way to tell Crystal not to perform range validation on dates?
     We would like to have a SQL Statment that looks like:
                       SELECT "TABLE_A"."ID"
                       FROM   "TABLE_A"
                       WHERE ("TABLE_A"."DT" = TO_DATE('2011-03-31'))
    We are on Oracle 11 with Crystal Report for VS2010 Sp1.
Thank you.
Charles

Have a look at the kbase below. I think this is a throwback to the fact that we can't handle the milliseconds in the DateTime. So, in order to ensure we get the correct data we search on a range plus one second of what you asked for.
[1217417 - SQL query shows '<' for a DateTime field filter although '<=' was selected |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333433313337%7D.do]

Migrating oracle data on windows to linux

Hi All,
I have one task need to be done very soon in my office,Please help me.
We have Oracle 10r2 on windows 2003 with 60GB database.
now we have to transfer database on windows to oracle10gr2 in Linux O/S.
Please tel me the procedure and steps to do so.
Can I use Transportable table-space after creating database on Linux?
Please give me all the steps in doing so.
Thanks in advance,
Rajini.

Rajini,
this forum covers migrations from foreign databases to Oracle. Your "only" change the platform of your Oracle database release. This question is better handled in the Database Forum
General Database Discussions

Oracle to MS SQL Migration Price Prediction

We want to calculate approximate man-month for migrating from Oracle 11g to MS SQL 2012. I have read the steps of migration. Are there any white papers about migration issues, difficulties. We are also using Hibernate in ORM layer. How can we predict migration
cost according to table size or relation count, HQL or native SQL query number or other criteria?

Hi ozgurba,
According to your description, you could download and use the free tool
Microsoft SQL Server Migration Assistant v6.0 for Oracle(SSMA) to migrate Oracle database to SQL Server 2012. About migration issues using SSMA, please pay attention to the points below. For more information about migration issues, please download and check
this
white paper.
1.The account that is used to connect to the Oracle database must have at least CONNECT permissions. This enables SSMA to obtain metadata from schemas owned by the connecting user. To obtain metadata for objects in other schemas and then convert objects
in those schemas, the account must have the following permissions: CREATE ANY PROCEDURE, EXECUTE ANY PROCEDURE, SELECT ANY TABLE, SELECT ANY SEQUENCE, CREATE ANY TYPE, CREATE ANY TRIGGER, SELECT ANY DICTIONARY.
2.The account that is used to connect to SQL Server requires different permissions depending on the actions that the account performs as the following:
To convert Oracle objects to Transact-SQL syntax, to update metadata from SQL Server, or to save converted syntax to scripts, the account must have permission to log on to the instance of SQL Server.
To load database objects into SQL Server, the account must be a member of the sysadmin server role. This is required to install CLR assemblies.
To migrate data to SQL Server, the account must be a member of the sysadmin server role. This is required to run the SQL Server Agent data migration packages.
To run the code that is generated by SSMA, the account must have Execute permissions for all user-defined functions in the ssma_oracle schema of the target database. These functions provide equivalent functionality of Oracle system functions, and are used
by converted objects.
If the account that is used to connect to SQL Server is to perform all migration tasks, the account must be a member of the sysadmin server role.
If the engine being used is Server Side Data Migration Engine, then, before you can migrate data, you must install the SSMA for Oracle Extension Pack and the Oracle providers on the computer that is running SSMA. The SQL Server Agent service must also be
running. And when SQL Express edition is used as the target database, only client side data migration is allowed and server side data migration is not supported.
3.Not all Oracle database objects have direct equivalents in SQL Server. In many cases, SSMA creates additional objects to provide the proper emulation. For example, an Oracle view could be converted to an SQL Server view. But the only exception is the materialized
view, which becomes an ordinary table.
4.Oracle DML triggers are converted to SQL Server triggers, but because the trigger functionality is different, the number of triggers and their types can be changed. Most common Oracle trigger is a row-level trigger (FOR EACH ROW). SQL Server supports only
statement-level triggers. In a row-level trigger, Oracle uses an :OLD alias to refer to column values that existed before the statement executes. SQL Server uses two pseudotables, inserted and deleted. If you are converting tables with UPDATE triggers, we
recommend setting the Generate ROWID column option to Yes or Add ROWID column for tables with triggers in the SSMA project settings. To emulate row-level triggers, SSMA processes each row in a cursor loop.
5.Some Oracle object categories, such as packages, do not have direct SQL Server equivalents. SSMA converts each packaged procedure or function into separate target subroutines and applies rules for stand-alone procedures or functions.
6.Unlike Oracle, Microsoft SQL Server 2012 supports neither records nor collections. When you migrate from Oracle to SQL Server 2012, therefore, you must apply substantial transformations to the PL/SQL code.
7.SQL Server 2012 does not support autonomous transactions. The only way to isolate a Transact-SQL block from a transaction context is to open a new connection. To convert a procedure, function, or trigger with an AUTONOMOUS_TRANSACTION flag, you split it
into two objects. The first object is a stored procedure containing the body of the converted object. The second object is a wrapper that opens a new connection where it invokes the first object.
In addition, regarding migration price prediction, please ask for the help from relevant department of your company, since this forum is related to the technical support for SQL Server.
Regards,
Michelle Li

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

How can I migrate data from SQL Server 6,5 to Oracle 8?

We have a web site based on Microsoft SQL Server 6.5.Now we plan
to migrate the database to Oracle 8.
We have redesigned the tables structure and created tables under
Oracle 8, so we only need to migrate data from SQL Server.
We've exported data from SQL Server to text files.
How can we import data from files and restore to Oracle tables.
Is there a solution which let us to import data for particular
table columns,not all columns?
We'll be appreciated if somene can give suggestions.
Regards
Michael
null

Thank you for your reply.
I'll try the Oracle sqlloader utility first.
Regards
Micahel
Oracle Migration Workbench Team wrote:
: Michael,
: Oracle sqlloader is user for this sort of operation, see
: Oracle8i Utilities
: Release 8.1.5
: A67792-01
: available online through Oracle Technology Network.
: The Oracle Migration Workbench can be used to create bcp and
: sqlloader scripts, though since you have altered the schema
these
: scripts would need to be altered by hand after generation.
: Some thought has been put into redesigning table structures in
: the Oracle Migration Workbench, but currently it looks like
this
: reengineering will be left to be done by other tools, eg
Oracle
: Designer, once the SQLServer database has been duplicated with
as
: little change as possible onto Oracle.
: Hope that helps,
: Turloch
: Oracle Migration Workbench Team
: Michael (guest) wrote:
: : We have a web site based on Microsoft SQL Server 6.5.Now we
: plan
: : to migrate the database to Oracle 8.
: : We have redesigned the tables structure and created tables
: under
: : Oracle 8, so we only need to migrate data from SQL Server.
: : We've exported data from SQL Server to text files.
: : How can we import data from files and restore to Oracle
tables.
: : Is there a solution which let us to import data for
particular
: : table columns,not all columns?
: : We'll be appreciated if somene can give suggestions.
: : Regards
: : Michael
: Oracle Technology Network
: http://technet.oracle.com
null

Data migration from Oracle to MS SQL using SSIS

Hi friends,
I know this question must have been asked by many who are beginners to SSIS like me about migrating data from oracle database to sql server database but i still would like to raise this query again.
I have table called tbl_employee_oracle in oracle database from where i need to retrive the latest records(eg. latest record of each employee) from the table and populate the result into the sql server database table which is tbl_employee_sqlserver
using ssis.
The logic i thought of doing this is as below;
1. Retrive all employees records from oracle database table.
2. Dump these records into a temporary table(will have same table structure as in oracle database) in sql server.
3. Creating a stored procedure in sql server which will contain logic to select the most recent records from this temporary table.
4. Populate this result set into the final table of sql server.
Please suggest me if working on this logic is worth and any alternate logic to accomplish this task.

There are many opitons, but choose among for your scenario
1. If your employee table is small with less than a few hundreds of record, you want to choose SCD Type 1 if not preserving histoy, incase of preserving history of records choose SCD2,
2. If you have less than few millions of records you can choose look up to direct unmatched records to insert into Sql Server Destination and direct matched records could be updated using OLEDB Destination or Try Merge Left outer Join
transform.
3. If you have several millions of records, you may want to use your above method.
4. Configuring to use CDC could be last option where there are large volumes of updates and inserts every few min to hours. But I'm not sure if this option can be set in Oracle Source.
Please mark this post as answer if it resolves your Problem. You may even mark it as helpful. Thanks

Faster way to migrate data from SQL Server to Oracle 10g

We have to migrate data from SQL Server to Oracle 10 g.
One particular table on SQL Server has records around 1.25 millions.
We tried moving data using DTS package, but looks it will take hours with current speed of 300 records/minute.
This table has TEXT column, which has XML strings stored. I am not sure, if this is the reason for slow migration.
Would you please suggest better options to migrate it faster?
Thanks in advance !!!

Have you tried Migration work bench?

Oracle Designer to SQL Data Modeller Migration

Hi
We would like to migrate our artifacts from Oracle Designer to SQL Data Modeller
Does anybody here have experience with that and things that i should be aware of that is possible with Designer but need to be handled differently in Modeller.

You might want to try this forum as well: SQL Developer

Move data from sql server v8 to oracle 10g

I just got urgent projects to migrate the data from MS SQL server 2000 to oracle 10g. The following are requirements:
Source data/table: MS sql server 2k (version 8) on MS 2000 machine.
Destination Data/table: oracle 10g (10.1.0.4) on Redhat version 3.
Total number of tables: < 10 tables and < 1000 rows each tables.
This is only one time data extraction. No periodically data extraction need.
Questions:
What connect method I should use? (odbc or jdbc)
What if I have image datatype?
Thanks in advance.

Use the Oracle Migration Workbench.
http://www.oracle.com/technology/tech/migration/workbench/index.html
I think IMAGE will be migrated to BLOB by default.
Donal

What is the easiest way to export all tables data from Oracle to MS SQL Server?

Hello MS,
I would like to export all tables from Oracle 11.2 to MS SQL Server 2012 R1.
Using the tool "Microsoft SQL Server Migration Assistant v6.0 for Oracle" did not work for me because there are too many warnings and errors regarding the schema creation (MS cannot know it because they are not the schema designer). My idea is
to leave/skip the schema creation to the application designer/supplier and instead concentrate on the Oracle data export and MS SQL data import.
What is the easiest way to export all tables data from Oracle to MS SQL Server quickly?
Is it:
- the „MS SQL Import and Export Data“ Tool
- the “MS SQL Integration Services” Tool
- not Oracle dump *.dmp format because it is a propritery binary format
- flat file *.csv (delimited format)
Thanks!

Hi lingodingo,
If you want to directly export all tables from Oracle database to SQL Server, I suggest you use SQL Server Import and Export Wizard. Because you just need to follow the wizard with GUI, this is the easiest way.
If you want to make some modification for the tables‘ data before loading to SQL Server, I suggest you use SQL Server Integration Services package. For more details, please refer to the following similar thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/38b2bed2-9d4e-48d4-a33f-1d9eed1c062d/flat-file-to-sql-server?forum=sqldatamining
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Using Oracle Forms Importing Data From SQL Server into Oracle Tables.

Dear All,
We are using Oracle Forms 10g in windows XP and having OAS 10g and Oracle database 9i.
How can we import data from SQL Server 2005 into Oracle tables using Oracle Forms?
Thanks & Regards
Eidy

I have no idea what "Oracle Hetrogenius Services" is, so I can't help you with that, sorry.
SQL Developer might also assist you. SQL Developer can connect to SQL Server as well as Oracle and has some tools for migration. See the documentation for details:
http://download.oracle.com/docs/cd/E12151_01/doc.150/e12156/toc.htm
For additional help on using SQL Developer for this task, please consult Support or the SQL Developer forum: SQL Developer
Hope this helps,
Jacob

Migrating Oracle data to SQL

Similar Messages

Maybe you are looking for