Migrating the replication-master-site-database to another hardware

Hello folks, hello oracle
we have got the followiong configuration:
--> Database 8.1.7.0
--> Advanced Replication system
--> Single master, snapshot configuration
--> 50 Slave-sides; offline replication once a day
--> per slave side: 50 RO-Snaps, 4 UP-Snaps
an the following problem:
we need to migrate the master database from
an IBM-AIX-host-computer to an HP-UX-host-computer.
the question is:
Wich steps do we have to make?
Is there a documented way or method to do this?
Kind regards
Steffen

Hello,
thanks for your answer:
the database names are the same.
We made already a full database export und imported it into the target database.
This was not succesfull, because after the import in the target database
the table dba_registered_snapshot was not filled!
Now: what to do?
Kind regards.
Steffen

Similar Messages

Improving performance on migrating data from one Oracle database to another

We are using hibernate to migrate complete tables from one database to the other. This takes hours to days to transfer a couple of tables, all having relationships between each other. The only difference is that the new tables have an extra column which stores the primary key of the source table as an alias key in the destination table and the destination table has only one extra column which is its own primary key. Another small difference is that the name of the columns is a little different.
Isn't there a simple way to use Oracle database's in built tools to migrate data if provided the source and destination tables and column names for mapping purposes? Please provide some suggestions for this Oracle newbie. Any other suggestions on improving the migration performance will be greatly appreciated.
Suggestions please!!!

Hello Justin,
Thanks for your prompt reply. Ours is a small company so we take up all kinda roles. In this particular scenario, I was asked to migrate all the tables from one database to another. Both of the databases are present on two different machines but on the same network. There are about 100,000 records in some of the tables and there are about 50 tables to migrate. As I said, both the tables have different columns to be mapped and then transferred and the new table has only one extra column which is a primary key in the new table. Under these constraints, Hibernate is taking way too much time.
I always felt that there must be a simpler and efficient way to do this. I would appreciate if you could you explain me the procedures in detail please.
Thanks in advance.

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Infopath forms to SharePoint 2013

Hi,
We have a requirement to migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.
Can somebody please guide us as to what could be the best approach to go ahead?
Thanks in advance.
Regards,
Vijay

Use STSADM
backup and
restore to migrate SharePoint 2007 site
containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

How to Move or Copy the Tables from One Database to Another Database ?

HI,
Can any one help me on this, How i can move or copy the tables from one database to another database in SQL server 2005 by using SQL query. Hope can anyone provide me the useful and valuable response.
Thanks
Gopi

Hello,
Maybe these links help you out
http://www.microsoft.com/downloads/en/details.aspx?familyid=56E5B1C5-BF17-42E0-A410-371A838E570A&displaylang=en
http://www.suite101.com/content/how-to-copy-a-sql-database-a193532
Also, you can just detach the database make a copy and move it to the new server.

Missing Discoverer reports after migrating the EUL to new Database.

Our Environment is Discoverer Relational- OLTP
We have recently migrated the source database from Oracle 9.2.0.6 to 10.2.00.0 RAC, this made us to migrate the Discoverer to new database in production.
Below are the database objects we migrated to new database.
1. EUL schema
2. Schemas referred by the Objects in the EUL (schemas containing functions, tables, views etc)
3. Based on trigger we created to filter active discoverer database accounts, migrated only active database users to new database.
Note: we had almost 4000 Discoverer users from 2005, since many of these users moved out of company or not using discoverer permanently, and there are users who used discoverer once in year or once in 6 months.
Finally we come up with 300 Active Discoverer users to be migrated to new database.
Issues: After migration
Some of the migrated users did not get their reports migrated which are shared by other users? [Since we didn’t migrate these users schemas as they are not active].
We have queried the EUL5_DOCUMENTS table in new database for a particular inactive users account (account which is not migrated) is not showing any reports owned by him.
Since we have migrated EUL schema and active users new database, is this will effect the EUL, [Information related to non active users gets deleted from the EUL in New Database]
Some users who are not figured in the active migrated list are requesting to get access to discoverer on new database. Can you please suggest the correct way to migrate these accounts.
Exporting the accounts will work?
Thanks in advance.
Sunil

Kanchana Devasurendra wrote:
Hi ARS,
Please check the following item in your new database.
1. log_archive_max_processes Most properbly value set for this parameter is low ( may be it's set to 1.) Please increase up ( 4)I am curious to know what makes you think 4 is the right magic number for log_archive_max_processes - after all, he's only got one archive destination.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

Replication/ Master Site

Hi,
I4m trying to do a Materialized view site configuration and when i am finishing returned the following error ORA-02082 a loopback database link must have a connection qualifier.
Ok, i know error mean that: This was made to create a database link with the same name as the current database.
what i need to know ?
which are the necessary step to build master sites union two database table ?

Hello,
thanks for your answer:
the database names are the same.
We made already a full database export und imported it into the target database.
This was not succesfull, because after the import in the target database
the table dba_registered_snapshot was not filled!
Now: what to do?
Kind regards.
Steffen

Which is the best way to migrate the SQL SERVER 2000 Database to SQL SERVER 2003 Database?

Hi,
I need to migrate the Production database sql server 2000 to Sql server 2003, Please give me the best idea to migrate the database without any loss data, credentials and Objects.
Nandha Kumar

SQL server does not have any version named SQL server 2003 please check the version correctly it should be either SQL 2005,2008,2008 R2,2012
You can use the backup/restore to upgrade the SQL 2000 database to till SQL 2005,2008,2008R2
For SQL Server 2000 to 2012
First upgrade from SQL 2000 database to either SQL 2005, 2008 or 2008R2 and than upgrade it to SQL 2012.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/eaa1eb44-729f-466b-8233-cb768fbb4208/upgrading-to-sql-server-2008-from-sql-server-2000?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/4fac7511-2c75-46a0-802b-807dd26b12bf/sql-2012-will-not-convert-a-sql-2000-database?forum=sqlservermigration
And after migration to SQL 2005 or 2008, if you want to script the database than can generate scripts pick DB and check off "script all objects in the selected database".
http://blog.sqlauthority.com/2011/05/07/sql-server-2008-2008-r2-create-script-to-copy-database-schema-and-all-the-objects-data-schema-stored-procedure-functions-triggers-tables-views-constraints-and-all-other-database-objects/
You can upgrade from SQL Server 2005, SQL Server 2008, and SQL Server 2008 R2 to SQL Server 2012.
http://msdn.microsoft.com/en-us/library/ms143393(v=sql.110).aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Moving the DPM 2012 SQL Database to another SQL Server

I have 2 DPM Servers running and I would like to move those SQL Dbs onto another SQL Server. I know during the install you can select whether or not you want to install SQL or use another instance, but I dont want to re-install the whole thing and start
over. Is there any easy way to do this?

Hi,
in my opinion, you can stop with this Walkthrough after step 6, dont think that you Need to do a sync or consistency check.
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

How to import the datafiles from one database to another

Hi,
I have got some datafiles from the existing database(Consider it as Database A), but it has been removed as of now.
I am having the datafiles and control files of it.
I have freshly installed one oracle Database(database B), I am planning to load those datafiles in the newly installed
database.
Is it possible, if so wat is the procedure.
Both the databses are Oracle 11g.
Help me out of this.
Thanks.
Regards
Gatha

Hi,
As you said that you have data files and Control files, then using import quite no possbile, but you need to do it manually (as it exits in the Source System in same path).
Initially, you copy these files from the Source System to Destination System that is
Data Files and Control Files
Next, you will get the DBID from the controlfile backup is you have Example :-
CTL_SP_BAK_C-1507972899-20070228-00, then " 1507972899" is the DBID,
Try to use the RMAN for this
example :-
Open the rman
set dbid 1507972899
then you need to build the initilizaition file to start an instance based on the Configuration
or Copy the spfile from the back from source system if exits.
Startup the DB in mount mode.
You might get the error
ORA-01078: failure in processing system parameters
Now restore spfile from 'backup path' where you have copied files
startup force nomount
Now the instance is started
connect to DB as sysdba
check the control file parameter values and online redo Log files paths (Log_Archive_dest)
Restore the old control file from backup, since the new instance must the know where the files are located
restore controlfile from 'backup path'
then shutdown the DB
start in mount mode
restore the DB - restore database
Note: Recovery is dependent on the available archived (and online) redo logs.
Final step will be Alter database open resetlogs;
- Pavan Kumar N

How to migrate the data from on version to another version in SAP

Hai,
Now iam working in Upgradation and Data migration Project. Iam new to this Project. My problem is we have the data of one module in 4.7e and we want that module data into upgrade verion say ECC 6.0. But we didnt want to upgrade that module. Pls guide me in this.

hi,
Welcome to SCN.
if you want data of specific module to be transported to different version then you can use BDC,LSMW or BAPI for the transactions of that module according to your requirement.
Also if you search in SCN with migrate data to different version you will get lot of posts.

Migrate APex workspace to new database

Hi
Can someone please help me out with the steps to migrate the Workspace from 1 database to another ? The app server remains the same, we are migrating the db to a different platform.
I have Dashboard , Apex_data and flows_03100 schema created by Apex.
Thanks
Edited by: user622632 on Mar 16, 2009 4:46 PM

I tend to migrate workspaces from my office to my home by using SQL*Developer-export it has the ability to create the DDL with the data option.
Then export my applications and images.
At New station with APEX installed:
1. Create the workspace using the apex_admin login.
2. Create a connection in SQL*Developer to the new workspace.
3. Run the DDL in SQL*Developer (make sure you run it as the right user).
4. Import my applications and images.
That should give you a general idea.
Try using SQL*Developer to export Dashboard and Apex_data for the DDL, then follow the steps above to migrate them to the other database.
Good luck,
Mike

How to migrate the data from DB to another DB

Hi folks,
             In my project I have one requirement. Let me explain in detail we are maintain two databases one for
             master database called *GIIS* and one is history database HIST. Both DB version is 10g R1.
             (Both DB’s have same no table as well structures)
             1. The GIIS database contains nearly 400 tables (master table as well as temporary table)
                   each Master table having it’s own temporary table.
             2. Whenever we made the entry first it will go to temporary table after authorized that entry it will move to the master table
             3. But the temporary table contains the data after move to master table .
             4.     The temporary table data’s will be move to the HIST database each and every day at the night.
                This migration we done through the procedure. After migration complete the temporary table data’s will de deleted.
My Question:
           1.     Whether it’s good practice to migrate the data from GIIS DB to another HIST DB using oracle stored procedure.
                 (we created the DB link from GIIS to HIST)
           2.     If not can any one suggest me the way to migrate the data from GIIS to HIST.?
           3.     Is there any other possibility to migrate the data from GIIS to HIST with out using procedure?Thanks
Arun

Arun wrote:
Hi Mr.Aman Brother
First of all sorry . I am not saying that don't command my requirement. Just i want know the way of migrate the data from one DB to another DB.
you saying that IMPORT/EXPORT is one of the way to do migration.
But in client side they don't know how to do the IMPORT & EXPORT the database..
Can you suggest me the another way to do that
Arun,
If the client doesn't know how to do exp/imp, I would really doubt and would be immensely concerned before suggesting the client any other way. If they don't know, tell them that there is a concept called test database which is used for learning so they should invest time to learn this technique since the other options suggested by fellow members are far more tougher than this one.
Aman....

Migrating the replication-master-site-database to another hardware

Similar Messages

Maybe you are looking for