Missing Discoverer reports after migrating the EUL to new Database.

Our Environment is Discoverer Relational- OLTP
We have recently migrated the source database from Oracle 9.2.0.6 to 10.2.00.0 RAC, this made us to migrate the Discoverer to new database in production.
Below are the database objects we migrated to new database.
1. EUL schema
2. Schemas referred by the Objects in the EUL (schemas containing functions, tables, views etc)
3. Based on trigger we created to filter active discoverer database accounts, migrated only active database users to new database.
Note: we had almost 4000 Discoverer users from 2005, since many of these users moved out of company or not using discoverer permanently, and there are users who used discoverer once in year or once in 6 months.
Finally we come up with 300 Active Discoverer users to be migrated to new database.
Issues: After migration
Some of the migrated users did not get their reports migrated which are shared by other users? [Since we didn’t migrate these users schemas as they are not active].
We have queried the EUL5_DOCUMENTS table in new database for a particular inactive users account (account which is not migrated) is not showing any reports owned by him.
Since we have migrated EUL schema and active users new database, is this will effect the EUL, [Information related to non active users gets deleted from the EUL in New Database]
Some users who are not figured in the active migrated list are requesting to get access to discoverer on new database. Can you please suggest the correct way to migrate these accounts.
Exporting the accounts will work?
Thanks in advance.
Sunil

Kanchana Devasurendra wrote:
Hi ARS,
Please check the following item in your new database.
1. log_archive_max_processes Most properbly value set for this parameter is low ( may be it's set to 1.) Please increase up ( 4)I am curious to know what makes you think 4 is the right magic number for log_archive_max_processes - after all, he's only got one archive destination.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
A general reminder about "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but it also acts as a pointer for other people when they are researching the same question, moreover it means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) what's so bad or wrong about the answer you found helpful.

Similar Messages

Testing the Reports after Migration

Post Author: vreddy
CA Forum: Migration to XI R2
Hi all,
Can any one tell me how can we test the reports after migration from BO 6.5 to BOXIR2?
Thanks,
Reddy

Hi Sripathy
Together with the guy informing me of the problem we reproduced the error situation.
The errormessage displayed at the screen is: "RWRBE60.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is created." We looked at the local hard drive of the PC to find some extra error information. The only things we found were a crash dump file user.dmp and and another file with dump information. From the dump-info I can see that the proces rwrbe60 caused an access violation and crashed. To me it seems now that there is no Oracle error log, but it is a Windows error message.
I fear now that the question is becoming more a windows question than an Oracle question. Still it is an Oracle process causing the access violation. So any tips how to continue are welcome. I do not have experience to read windows crash dump files. What could cause the access violation? Could it be a missing font file, or is it necessary to set write access to some specific directories, or other?
regards,
Henk

InfoObject is missing in report after upgrade

Hi,
My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
I did comparison of report before and after upgrade and found this issue.
the data content is the same but only this infoObject cannot be seen in the report
how do I correct this issue.
thanks
Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

This not fixed. SAP couldn't explain why

Problem with BPS Reports after upgarding the system to BI.7

Dear Experts,
We are facing problem with the BPS Reports after upgarding the system to BI.7
In 3.5system the reports are dispalyingthe data.
we have copied the production system to X system and has migrated the same to BI.7.
in the X system the reports are not showing the data and even we generated the web interfaces in X system.
After giving the input to BPS Layout and when we go for output ,we are getting the message No Data has been found.
when we chekced the corresponding cube data was existing.
It would be a great help if any valuable suggestions to over come the problem.
Regards,
Sunil...

Dear Andrey,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code has not been maintained for the sales documnet 1296".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

SUBMIT an ABAP report after creating the WI but before completion of WI.

Dear All,
I am having an activity which sends the approval work item.
Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
I can not call this report before approval activity because i need to pass this WI ID to this report.
Please suggest some way to solve this.
Regards,
Amar

Hello,
You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
What is the purpose of this report? Why does it need the workitem id?
regards
Rick Bakker
hanabi technology

Issue in Custom Blog site definition based on SharePoint 2010 blog site definition after migrating the sites to SharePoint 2013 and site collection upgrade

I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
We created new SharePoint 2013 farm and deployed the all Custom solutions in
14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
PostTitle column of Comment is not getting populated.
Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned. default.aspx and look-up between post and comment list are not working.
If any one has faced such issue then please share your findings and any solution to fix this.
Thanks in Advance :)

Hi ,
According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like <BaseTypes> and <ListTemplate> etc. More information, please refer
to the link below:
http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
For that the PostTitle column of Comment is not getting populated, please try to modify the view, then compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Standby database(11g) was still in sync after stopping the primary and standby database listener.

Hello !!!
I have noticed that my standby database(11g) was still in sync after stopping the primary and standby database listener.
If this is the case then how log is transferring from primary to standby ? it is not using listener service ? kindly clarify

Read this Metalink Note:407040.1

Migrate APex workspace to new database

Hi
Can someone please help me out with the steps to migrate the Workspace from 1 database to another ? The app server remains the same, we are migrating the db to a different platform.
I have Dashboard , Apex_data and flows_03100 schema created by Apex.
Thanks
Edited by: user622632 on Mar 16, 2009 4:46 PM

I tend to migrate workspaces from my office to my home by using SQL*Developer-export it has the ability to create the DDL with the data option.
Then export my applications and images.
At New station with APEX installed:
1. Create the workspace using the apex_admin login.
2. Create a connection in SQL*Developer to the new workspace.
3. Run the DDL in SQL*Developer (make sure you run it as the right user).
4. Import my applications and images.
That should give you a general idea.
Try using SQL*Developer to export Dashboard and Apex_data for the DDL, then follow the steps above to migrate them to the other database.
Good luck,
Mike

SQL query was failed in my report after migrating to Oracle 10gR2

We have a aplication running under Oracle 9.2.0.4 DB. we migrated our DB to Oracle 10gR2. While running the report, we got an error:
ORA-00904: "A3"."FACILITY_SYSTEM_ID": invalid identifier
ORA-06512: at "CEAS_MK_RPT.GET_LIST", line 12
The SQL query which causes this error is:
INSERT INTO gtt_facility_seq_generator
(date_range)
SELECT get_list
(CURSOR (SELECT auf.facility_system_id
FROM authorized_facility auf
WHERE auf.facility_system_id = afs.facility_system_id
AND auf.credit_application_system_id = :p_cred_appln_id
FROM authorized_facility afs,
(SELECT af.facility_system_id facility_system_id
FROM facility_obligor fo, authorized_facility af, party p
WHERE fo.facility_system_id = af.facility_system_id
AND fo.party_system_id = p.party_system_id
AND NOT EXISTS (
SELECT NULL
FROM facility_third_party_subst iftps
WHERE iftps.facility_system_id =
fo.facility_system_id)
) tab1
WHERE afs.credit_application_system_id = :p_cred_appln_id
AND tab1.facility_system_id = afs.facility_system_id
ORDER BY afs.creation_date;
The content of function get_list() is:
CREATE OR REPLACE FUNCTION CEAS_MK_RPT.Get_List
p_cursor IN sys_refcursor
RETURN VARCHAR2
IS
l_sep VARCHAR2(4);
l_text VARCHAR2(30000);
l_text_return VARCHAR2(30000);
BEGIN
LOOP
FETCH p_cursor INTO l_text;
EXIT WHEN p_cursor%NOTFOUND;
l_text_return := l_text_return || l_sep || l_text;
l_sep := CHR(10);
END LOOP;
CLOSE p_cursor;
RETURN l_text_return;
dbms_output.put_line ('a');
END Get_List;
The same report was executed perfectly in Oracle 9i. Kindly help us to short out this issue. Thanks in advance.
Regards,
Sengol S

Hi Nirav,
Many thanks for your response. I verified the same, but the same query was executed successfully after removing the INSERT INTO part(executed the SELECT part only). What might be the cause for this error?
For your kind information :
I have 2 schema in my DB( ceas_mk_app and ceas_mk_rpt ).
All the source tables are present in ceas_mk_app schema - These tables are used by ceas_mk_rpt schema(using synonym) to generate the report.
I'm executing the above said query from ceas_mk_rpt to insert the necessary data in to report temp. table.
Thanks,
Sengol S
Edited by: seng1256 on Dec 22, 2008 12:31 PM

Multi Value error observed in one report after migration from BO 3.1 to BO 4.0

Hi,
Can someone help me resolving the #multivalue error after migration of report from BO 3.1 to 4.0 environment
I have compared all the formulas and they are same in both the
I have observed, if I create a new tab with the report, The multivalue error is not observed
Can somebody please help me regarding this issue
Thanks
Javeed

Hi Javed,
MultiValue error appears if you have multiple result values for the same row values combination.
Try including an object from object panel which can differentiate the values for that row.
For Example,
Lets say you have an item & you have a keyfigure Invoiced amount where it has 2 different values at schedule line level.
So the values in webi BOBJ depends your BW architecture like how the infoprovider is designed. If your infoprovider has the invoiced amount values based on item and schedule line level then if you dont add the schedule line in webi report, you ll get the "#MULTIVALUE" Error.
If you are using any Variables in the webi Report, try using
=[keyfigure] in [Dimension]
Hope this helps.
Regards,
Naveen

Problem in displaying reports after migrating 6i to 9i

Hi,
I have migrated the Oracle Reports 6i on NT to 9i running on Solaris. While I don't have any problems in accessing some reports on the web in PDF format, for certain reports it gave me a small dialogue box to install Thai text support. After clicking cancel, it shows 'Terminated with error: REP-300: invalid column name SELECT ....'
Is it due to the incompatibility of 6i and 9i ?
or do I need to recompile the .rdf files ?
Your fast response is apprecciated.
Thanks.
Jikur

according to your description you did two things at once, changed platform and upgraded product version.
although reports 6i and 9i are compatible and you should be able to run 6i reports without any changes in 9i, we always suggest that you re-compile your RDFs on the new version.
also the change from NT to unix could have something with your behaviour. i would check if the re-compile of your reports helps. if not, please contact oracle support services for further investigation.
regards,
philipp

Date issue in webi report after migration to XI 3.1

Hello All,
We had designed a webi report in BOXIR2 with run date present in report header section. This report was working fine in XIR2 environment.
However after migrating this report to XI 3.1 with sp2 and fp2.2, we have observed that date part is getting eliminated from the report header. If date is 13/01/2010, then only 13 is visible and rest of the date is getting out of report. This happens when we export report to PDF (We need final output in PDF).
The same thing was working fine in XIR2. From 'properties' section of report, we have verified that report format has not changed. Also we are using latest version of Adobe (9.2).
Can you suggest us the steps to resolve this issue?
Sincerely,
Chinmay

Hi,
When you view the Report in WebI Format is the Date shown correct ?
When you export the Report in xls. is the Date shown correct ?
Could you please re- validate your formular in XI 3.1 for the date
Compare the Format of the Object in the Universe between Rel.2 and XI 3.1 (if the Date informations in an object in your Universe)
Only Adobe Reader 8.1.2 and 9.0 are supported. Can you please install one of these versions and retry ?
Regards
-Seb.

Changes not reflected on the page after migrating the page to server

Hi all,
I have migrated a page to server after making some adding a messageTextInput field but the changes are not getting reflected.
I followed the following steps to migrate the page:
1. Copied the page.xml from local machine to server.
2. Ran the below import command :
adjava oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/oracle/apps/aear/Refunds/webui/RefundCreatePG.xml -rootdir $JAVA_TOP -username apps -password apps -dbconnection "(DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=aebsw1d.aetna.com)(PORT=1571)) (CONNECT_DATA= (SID=AEBSDEV2)))" -rootPackage $JAVA_TOP
It said
Import completed.
3. Bounced the apache server.
4. Ran the below script to see the page definition:
DECLARE
BEGIN
jdr_utils.printDocument('/aebsu03/app/AEBSDEV2/apps/apps_st/comn/java/classes/oracle/apps/aear/Refunds/webui/RefundCreatePG',1000);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
END;
It has my messageTextinput field info. But I can't see it on front end. Even though when I run the page from my jdev I am able to see that field.
Plz guide me if I am missing anything.
Thanks in advance

Hi,
Go to 'about this page' from front end and check the path for this PG.xml and compare that path with the one that you are importing.
As per my understanding, if this is a custom page, then the path you are using is not correct.
Let me know if you need more clarification.
--Sushant
[email protected]

Missing Index entries after Migrating Repository from 1.3.2 to 9i

Hi,
We have migrated our repository from 1.3.2 to 9i.
Index entries were created for both the Primary keys and Foreign keys.The indexes were created by us and not by designer.
After migration to 9i the index entries for primary and Foreign are missing in the design editor.When we generate a table we get an error because these index entries are missing.
Does designer 9i support index entries?Or How are indexes handled by designer 9i?

To clarify, your index entries were in the database but NOT defined in Des 1.3.2 model? Because if they were in the model, then I'd look back at your intermediate migration definitions to make sure the indexes were still defined properly in there.
In Des 2.1/6.0/6i/9i/10g, Indexes are a separate sub-element (SACs) for a Table Definition. They don't have to be associated with a key structure. And in newer database versions, a PK / UK has an implicit index constructed for it in the database, so Designer doesn't bother showing you the Index in the model. Just the PK or UK itself (again, these are also separate SACs).
And it's not clear where you're getting the error. During the generate? Or during the instantiation into a database? Neither situation is a common fault.

Returning to the parameter form in a report after closing the report page

hi all,
tell me a way to get the following solution
how can we return back to the parameter form of a "parameterised
report" after closing to the report window.
i ve tried a little bit with "srw_run_report"
reply me as quick as possible
prabhakaran

Try using menu options
Tools\Parameter Form Builder
you can either select/deselect any parameter from the list

Missing Discoverer reports after migrating the EUL to new Database.

Similar Messages

Maybe you are looking for