Migrating Third Party Data into E-Recruiting

Hello,
We are begining to look into migrating data from our old applicant tracking system into our currentE-Recruiting 6.0 SP10 system. The old applcant tracking system is called Personic and uses Oracle as it DB. We are considering doing this project in-house. Is there anyone who has done such a project that might have some ideas on a good place to start?
Thanks!
Ryan

Hello Ryan,
I think it will get difficult for you to find someone who ever did this. Usually the data of recruitment application is ranked this low that companies do not migrate the data. The cost / output relation is often considered as no effecient. When e-recruiting is your first real online recruiting application it is no problem to have all applicants entering their data. Only if you already have an real online tool (here i am not sure about Personic) it might be a bad public relation if applicants have to enter all data again. Even the customers changing from SAP recruiting (PA-RC) to e-recruiting (PA-ER) avoit migration.
Some are outfading the old system meaning they set a date where they publish all new requisition through the e-recruiting. All old positions are run in the old system till completed all new one use the new system. This is no real problem as e-recruiting is no payroll where having 2 half payment runs would be a real issue.
Others try to change in a low hiring period and move only some necessary applicants. This is then done by some interns / datatypists who just hack all data in. This is cheaper than running a large migration project.
If you really decide for migrating whatever the reasons are you start like in every data migration project. You take the Personic data model and the e-recruiting data model and you map the data. Decide which data can be moved directly, which data needs transformation and which data might be excluded from migration as it does not fit the data model.
When you have done this you can start thinking about technics. A first entry point for this might be the ALE Inbound for SAP HR Master data to create internal applicants for employees as this doing something similar it maps the SAP HR masterdata model to the e-recruiting one.
Of course you should already have a high knowledge of the e-recruiting datamodel at this point (probably derived from the data mapping activities).
To be honest I am not really sure if you will be happy with this entry point as the code is quite confusing but I cannot imagine another one. You have also take in account that e-recruiting uses a complete different programming model than the other PA components - PA does not use ABAP OO and does not use other components to store data. So knowledge from HR will not help very much. I'd probably take a SE80 and just write 3 or 4 reports from the scratch.
If you have some more detailed questions just ask. In general it would be very helpful to have a rough idea of how much data we talk.
Best regards
Roman

Similar Messages

How to Call third party Jar into Application

Hi Can any Expert help ?
I want to put third party Jar into my application but i have some problem occur.
1. how to call jar with parameter in application ?
2. when i exit the third party jar task, it will exit my main task too. How to set my main tast exit stats standalone ?
3. I have over 10 jar files in one application, how can i set a classpath for client to call JNLP, instread of load all jar to client before run.
Thanks.
Sanki Poon ([email protected])

1) Sounds like you are trying to launch the third party from it's application main instead of using it as an API How does your code interact with it or is that not important?. You don't call a jar, you load a class. You could use a exec http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Runtime.html to run the java launcher and pass it all it's command line stuff(But this may not be possible security wise via WebStart).
2) if it is launched in the same JVM and it calls a System.exit there is nothing you can do about your app closing too. It would need to be in another instance of the JVM
3) Under the resources tag you can have as many jar tags as needed.
    <resources>
        <j2se version="1.5.0" java-vm-args="-esa -Xnoclassgc"/>
        <jar href="/jsf-wita/apps/MathMLWebEditor.jar"/>
    </resources>

Local Copy of Third Party Data

There has been a serious proformance issue with a web application we are releasing soon. The problem is that we are displaying some third party data ( stock rates of each day) taken from some other sites. This is making the application remarkably slow, as the rates need to be displayed in more than one pages.
Is there anyway to keep local copy of such data, or any other way to enhance performance?
Thanks in Advance.
Sudarshan

It is difficult to overemphasize Roger's advice in his last sentence. I've owned all manner of Apple gear over the years and have been incredibly lucky - I never quite got over the "remove from box, connect pieces, turn on" mantra from the early days, even as the process got more and more complicated. And even though I am now retired, I was an IT professional who knew almost innately that the key to keeping things going was to have an adequate backup strategy. Yet at home I basically trusted that my various and sundry disk drives would somehow take care of themselves well enough to not need to be backed up. All of that went well (except for some bumps during the cutover to MobileMe) until this past Friday, when I somehow managed to screwup a sync process and watched in horror as my calendars slowly disappeared from iCal. Thank God for the upcoming iCloud - I had just make a disk image of my entire laptop in preparation for cutting to iCloud from MM and so could retrieve the calendars from there. It took me a while to figure out that I couldn't just copy the Calendars folder out of the disk image and expect to be back on the air. Thanks to the patience of one MadisonP, who provided a detailed procedure for recovery, I'm now back to business with a BIG lesson learned. I've probably got too many calendars and so the backup (export) of of the total bunch seemed like a daunting task, but it beats missing important appointments that you can't remember after your calendar bites the dust.

ADF mobile: How to pack a third party jars into apk

Hi Expert,
I am using Jdeveloper + ADF mobile 11.1.2.4 to develop an android application. In this application, I need to call some functions in the third party jar files. I need to add the third party jars into my apk so that those classes can be found during runtime.
I followed section 17.1.1.1 to add the libraries into my project. However, after I deployed my app to the emulator and tried to run it, it reported "encountered error: classes not found". And I also found that the third party jars don't exist in libs/ directory of the apk. Do you know how to solve the problem: How to reference a third party jar files in my app and make sure it works?
Thanks,
Yan

Create a /libs directory within Android project directory and copy the JAR files to /libs.
To build.properties add
external.libs.dir=libs

How to include a third party component into a netbeans project

I am working in netbeans 5.0 and i want to include a third party component into my project.I have the jar files of a text editor ie FCK text editor.Could anyone tell me how to include the component into my project

- Put the jar file on a location you want (the location must be the same for all developers).
- Select the "Libraries" node of your project.
- Press the right mouse button to bring up the popup menu and choose "Add JAR / Folder..."
- Locate and select the JAR file you need and press OK.
- Now you have included it into your project.

Integrating third party hardware into MAX

Greetings all,
I'm curious about integrating some third party hardware into MAX. (Measurement and Automation)
A quick search hasn't landed any hits. So I'm curious if anyone has attempted to do this before.
Is this even possible?
Patrick Allen

I haven't heard of any. If you mean having the full functionality, not likely that NI will tell you the necessary internals of something that they have spent a bazillion man-hours integating with their hardware, particularly as it is a major marketing tool for selling their hardware. It is, in fact, one of the reasons I recommend NI hardware, can get hardware up and running with out writing a bit of code. Some third party hardware will show up in MAX, some instruments (HP/Agilent, etc.) but other hardware won't even be seen.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Store third party data with annotation or document .

How i can store third party data(data may be string value ) with pdf annotation or document using c++ plugin API's ?
Thanks ..

You can use the Cos APIs to add custom fields to any PDF object. Just be sure to use second class names as described in ISO 32000-1:2008

Exporting data third party system into SAP

Hi folks,
I am working on a task of hiring a applicant from a third party recruitment system into SAP. I have written an interface, to extract the data from the recruitment system and using the FM 'HR_PREPARE_NEW_EE' I store them in the interface table(T752F)
Then I use PA48 to conduct the process of hiring action for the applicants.
Question:
Using the FM i can import various data elements from the import parameters available, however when I use the transaction code PA48 I do not see all the additional parameters like address, city that I have imported for the candidate record.
Do I need to configure the transaction code into include all the additional columns that I am importing ?
How can I do it?
Any thoughts or leads would be really helpful. I am kind of stuck here.
I appreciate it,
Thanks,
VG

hi folks,
Have any one worked integration of third party recruitment service with SAP? I have successfully uploaded the data related to various data elements of infotypes 0,1, 2,6 etc.. into the temporary storage table (T752F) However when I use the transaction code PA42 some of the data elements are not hsowing up on the infotype screens like address data (available in the temporary storage for the candidate).
Do anyone have the experience of working using PA42 transaction to hire a candidate from the data in the temporary storage table ?
I need some help. Your help is appreciated.
Thanks,
VG

Getting BW and third party data source into SAP Cloud for customer

Hi Experts.
I have an architecture question and would like to know any guidance or pointers to help. We have a requirement to integrate 3rd party data sources to be brought into SAP cloud for sales so that reporting can be driven out of SAP cloud for sales. What is the best approach to do it.
Client doesn't want users to go to another site to look for reporting data.
Worst case scenario, is there a way to show BW or Third party reports in a separate tab where we can fetch the report data for user or may be a redirect link displays home page of reports under new tab without user leaving the cloud for sales application.
Thanks
Apoorva

Hi Vivek/Mithun,
I have brought in data from BW system to C4C using Webservice and stored it in C4C backend.
I am building a custom datasource from these variables, but I want to restrict access of this data based on user roles.
However, while creating the datasource "Enable Access Control" checkbox is not enabled. The help text says "To enable access control your BO must contain an association marked as relevant for access control".
Could you help me in understanding how can we enable this feature for our custom datasource?
I have also raised a separate thread also for this query Require more details on "Enable Access Control" feature of Data source
Thanks and Regards,
Manasi

Migrating Third Party Document Management System into SAP EP KM

Hello Everyone,
We are having a requirement to Migrate the documents from Third Party (Intraspect) Document Management System into SAP Enterprise Portal KM.
Documents in Intraspect are storing in Oracle Database. Our requirement is to Mirgrate the documents from Intraspect database to Portal KM Database.
Please suggest that how we need to approach in Migrating the documents and permissions from Intraspect to KM.
Thanks in Advance.
Regards,
Sridhar.

Hi,
Our requirement is to migrate the documents from intraspect oracle database to KM database.
Please suggest how the migration happens from database to database. And also suggest whether this will effect the performance of portal as the intraspect database having very high volume of documents.
If you have any links or any documents on this, please provide me.
Thank You.
Regards,
Sridhar.
Edited by: SridarReddy on Jun 4, 2009 1:36 PM

Integrating Third Party Data with BI Apps

Hi,
I have had a couple of inquiries from customers interested in BI Applications, but who want to integrate their reporting with data from other operational systems.
My question is: what is our recommended best practice for this scenario. Would we recommend customers to maintain two separate data warehouses with a single BI Server pointing to them and do the 'integration' at the enterprise model layer; or would we recommend the incorporation of their operational data into the BI Applications DW?
Obviously there are pros and cons for each and I would be interested to hear your views on these, understand what the implications are, and understand what our recommend approach is.
Thanks,
JOHN

I am not sure of any standard integration programs specific to recruitment, but through customization we can integrate third party rectt systems like People click, HRP etc.
Develop inbound programs with ALE-IDOC system to transfer the data to Rectt tables.
The switch will control activation of integration between the systems.
If this helps, pl do reward.
Thanks
Narasimha

Migrating third-party applications from 4.x to 5.x

Hi all.
My customer wants to migrate its CUCM 4.1.3 to 5.1.3. He has some third-party applications that read CDR's and process the information. I've heard that in version 5.x it's not possible to directly access to CDR in order to obtain the required data but you have to use the CAR tool. Is this true? Or you can use Informix commands via a third-party application to access the information at CDR's?
Thanks for your help.

The CDR records are stored in flat files and then FTPd or SFTPd to your choice of up to 3 billing servers.If you upgrade from Cisco Unified CallManager 4.x, Cisco Unified CallManager saves the CDRs in the CAR database to CSV files. The Data Migration Tool uses these CSV files to upgrade the CAR database. The system stores the CSV files in /common/download/windows/car. The system stores the pregenerated reports in /common/download/windows/pregenerated.
Because Cisco Unified CallManager 5.x does not use a CDR database to store CDR records as in previous releases, the CDR data does not migrate to the Cisco Unified CallManager 5.x system.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/service/serv504/car/carovrvw.htm#wp1102412

Oracle SQL Developer 3.1 Migration Third Party Databases Issues

Hi,
i had following issues with migrating from db2 v8 to oracle 11.2.
Online:
Due to missing privileges and roles for user db user migrations some steps have failed (CREATE USER -> ORA-01031 ...).
After correcting this like described in "Creating a Database User for the Migration Repository" in sqldev online help this has worked.
The problems are:
a) on the overview page at the end of the migration assistent all steps (CAPTURE, CONVERT, GENERATE, DATAMOVE) are shown as complete, even if nothing has done
b) on page 6/9 into migration assistant all changes for datatype convertion are ignored, for example CHAR to VARCHAR2
c) generated files are not visible, even if you mark refresh on file view
d) after restarting sqldev, generarted files are visible in file view, but when you add generated files to svn error message "svn: File: xxx has inconsitent newlines" is shown
e) after sucessful migration on opened migration project pane "data quality" sourcenumrows are NULL, even if they always NOT NULL and count(*) on any table on both sites are equal
Offline:
Generated skripts contains errors:
./startDump.sh: line 157: syntax error near unexpected token `done'
'/startDump.sh: line 157: `done < "schemas.dat"
Can anybody help?
Thanks in advance
André

Hi kgronau,
thanks for your fast answer.
Today i have found 2 new issue.
When you have opened a migration project from repository, on pane "data quality" sourcenumrows are always null
and
sourcename and targetname shows always databse object names from the database on the first migration project in repository independently of extra section in drop down box model and source.
kgronau wrote:
André,
I used SQL Dev 3.1 and I captured a DB2 database. Then I've changed the rule to map char to varchar2 and started the migration.
When I now check out my custom tables all all of them that had in the source model a char column are now using varchar2.I have tried to changed dataype for target database in place over the drop down box, not the edit rule button. It's a little bit confusing to have this option, when it doesn't works.
After using the edit rule button, all works fine. Just the summary page 9/9 doesn't report changed datatype assignment.
>
Could you please explain what you mean with your option c and d?c)
Yes i'm meaning View -> Files. Sorry but on german windows i have just german menu items. That is sometimes tricky to retranslate for support questions and also not helpful when using the online help where all menu items referenced in english :-(
(Do you have an ideo how can i configure sqldev with english menu aon german windows?)
I think, this problemn is special for output folders under subversion control.
d)
Generated Files after the end of the migration are just visible in output folders under subversion control after restarting sqldev
>
Edited by: kgronau on Mar 7, 2012 12:30 PM
Are you talking about Opening a File viewer window (View -> Files)? In my case I have chosen d:\temp\DB2 as output and monitored it during the migration. It isn't refreshed until I manually click on the refresh button - but once the migration has finished and written the output and when I then click on the refresh button I'll see all the directories and the files included.
Edited by: kgronau on Mar 7, 2012 12:39 PM
When a migration has finished then SQL Developer 3.1 now creates in the top directory an unload_script.sh file which calls the other unload scripts.That's right, all scripts are generated.
Also the data unload scripts were created - I need to find a DB2 on Unix to check the script - a quick check of the windows scripts worked correctly.
Edited by: kgronau on Mar 7, 2012 1:22 PM
These unload shell scripts to unload the data out of a DB2 database are also working.
Unfortunately I'm not able to test the shell script used for a source model unload as my UDB is running on Windows.
Didn't the online source model collection work? For me it looks like it did as you mentioned you changed the char data types to varchar2 and this requires already a connection to the source database - except you used the scripts that were generated using the startDump.sh which has failed. Yes, online source model collection did work. Just the unix shell script produces an error on the source unix system with db2. Please see below th generated script.
So please provide here some more details../startDump.sh was startet for testing purposes without any arguments
./startDump.sh: line 157: syntax error near unexpected token `done'
'/startDump.sh: line 157: `done < "
if [[ $# != 3 ]]; then
echo "Usage: startDump <database> <user> <password>";
exit 1;
fi
ROWTAG="'<row>'";
ENDROWTAG="'</row>'";
COLTAG="'<col><![CDATA['";
ENDCOLTAG="']]></col>'";
# Clear any other dat files
echo "Clearing older data files"
rm -f *.dat
echo "Connnecting to $1 as $2";
db2 -r connect.dat "connect to $1 user $2 using $3";
if [[ $? != 0 ]]; then
echo "Connection failed.";
exit 20;
fi
# GET SCHEMA QUERY.
echo "Get all schemas";
db2 +o -x -r schemas.dat "select SCHEMANAME SCHEMA_NAME from SYSCAT.SCHEMATA WHERE DEFINER <> 'SYSIBM' AND
SCHEMANAME <> 'NULLID' AND SCHEMANAME <> 'SQLJ'
AND SCHEMANAME <> 'SYSTOOLS'";
if [[ $? != 0 ]]; then
echo "Get schemas failed.";
exit 30;
fi
# Loop through file containing schema names and extract db objects for each of them
while read SCHEMA_NAME
do
# Create schema directory
rm -rf "${SCHEMA_NAME}";
mkdir "${SCHEMA_NAME}";
if [[ $? != 0 ]]; then
echo "Could not create schema directory ${SCHEMA_NAME}.";
exit 40;
fi
echo "Get all tables for schema $SCHEMA_NAME";
tablesFile="${SCHEMA_NAME}/""tables.dat";
# GET TABLES QUERY. */
db2 -x +o -r $tablesFile "select "$ROWTAG", "$COLTAG"||COLUMNS.TABSCHEMA||"$ENDCOLTAG", "$COLTAG"||COLUMNS.TABNAME||"$ENDCOLTAG",
"$COLTAG"||COLUMNS.COLNAME||"$ENDCOLTAG", "$COLTAG"||(CASE WHEN (COLUMNS.CODEPAGE = 0 and (COLUMNS.TYPENAME = 'VARCHAR' OR COLUMNS.TYPENAME = 'CHAR'
OR COLUMNS.TYPENAME = 'LONG VARCHAR' OR COLUMNS.TYPENAME = 'CHARACTER')) THEN COLUMNS.TYPENAME || ' FOR BIT DATA'
ELSE COLUMNS.TYPENAME END)||"$ENDCOLTAG", "$COLTAG"||CHAR(COLUMNS.LENGTH)||"$ENDCOLTAG",
"$COLTAG"||CHAR(COLUMNS.SCALE)||"$ENDCOLTAG", "$COLTAG"||COLUMNS.NULLS||"$ENDCOLTAG",
"$COLTAG"||COALESCE(COLUMNS.DEFAULT, '')||"$ENDCOLTAG", "$ENDROWTAG" from
SYSCAT.COLUMNS COLUMNS, SYSCAT.TABLES TABLES WHERE
COLUMNS.TABSCHEMA = '${SCHEMA_NAME}' AND
COLUMNS.TABNAME = TABLES.TABNAME AND
COLUMNS.TABSCHEMA = TABLES.TABSCHEMA AND
TABLES.TYPE = 'T'
ORDER BY COLUMNS.TABNAME, COLUMNS.COLNO";
if [[ $? != 0 ]]; then
echo "No tables found.";
fi
# GET SYNONYMS QUERY. */
echo "Get all synonyms for schema $SCHEMA_NAME";
synonymsFile="${SCHEMA_NAME}/""synonyms.dat";
db2 -x +o -r $synonymsFile "select "$ROWTAG", "$COLTAG"||TABNAME||"$ENDCOLTAG", "$COLTAG"||BASE_TABSCHEMA||"$ENDCOLTAG",
"$COLTAG"||BASE_TABNAME||"$ENDCOLTAG", "$ENDROWTAG" from syscat.tables
where tabschema = '${SCHEMA_NAME}' and type = 'A'";
if [[ $? != 0 ]]; then
echo "No synonyms found.";
fi
# GET VIEW QUERY. */
echo "Get all views for schema $SCHEMA_NAME";
viewsFile="${SCHEMA_NAME}/""views.dat";
db2 -x +o -r $viewsFile "select "$ROWTAG", "$COLTAG"||VIEWSCHEMA||"$ENDCOLTAG", "$COLTAG"||VIEWNAME||"$ENDCOLTAG",
"$COLTAG"||COALESCE(TEXT, '')||"$ENDCOLTAG",
"$COLTAG"||DEFINER||"$ENDCOLTAG", "$COLTAG"||READONLY||"$ENDCOLTAG", "$COLTAG"||VALID||"$ENDCOLTAG", "$ENDROWTAG"
from syscat.views
WHERE VIEWSCHEMA = '${SCHEMA_NAME}'
ORDER BY VIEWNAME";
if [[ $? != 0 ]]; then
echo "No views found.";
fi
# GET INDEXES QUERY. */
echo "Get all indexes for schema $SCHEMA_NAME";
indexesFile="${SCHEMA_NAME}/""indexes.dat";
db2 -x +o -r $indexesFile "select "$ROWTAG", "$COLTAG"||INDSCHEMA||"$ENDCOLTAG", "$COLTAG"||INDNAME||"$ENDCOLTAG",
"$COLTAG"||TABSCHEMA||"$ENDCOLTAG", "$COLTAG"||TABNAME||"$ENDCOLTAG", "$COLTAG"||INDEXTYPE||"$ENDCOLTAG",
"$COLTAG"||UNIQUERULE||"$ENDCOLTAG", "$ENDROWTAG" from SYSCAT.INDEXES
WHERE INDSCHEMA = '${SCHEMA_NAME}' AND UNIQUERULE <> 'P'
ORDER BY TABNAME, INDNAME";
if [[ $? != 0 ]]; then
echo "No indexes found.";
fi
# GET INDEX DETAILS QUERY. */
echo "Get all index details for schema $SCHEMA_NAME";
indexeDetailsFile="${SCHEMA_NAME}/""indexDetails.dat";
db2 -x +o -r $indexeDetailsFile "select "$ROWTAG", "$COLTAG"||INDSCHEMA||"$ENDCOLTAG", "$COLTAG"||INDNAME||"$ENDCOLTAG",
"$COLTAG"||COLNAME||"$ENDCOLTAG", "$COLTAG"||CHAR(COLSEQ)||"$ENDCOLTAG", "$ENDROWTAG" from SYSCAT.INDEXCOLUSE
WHERE INDSCHEMA = '${SCHEMA_NAME}'";
if [[ $? != 0 ]]; then
echo "No index details found.";
fi
# GET TRIGGERS QUERY. */
echo "Get all triggers for schema $SCHEMA_NAME";
triggersFile="${SCHEMA_NAME}/""triggers.dat";
db2 -x +o -r $triggersFile "select "$ROWTAG", "$COLTAG"||TRIGSCHEMA||"$ENDCOLTAG",
"$COLTAG"||TRIGNAME||"$ENDCOLTAG", "$COLTAG"||DEFINER||"$ENDCOLTAG", "$COLTAG"||TABSCHEMA||"$ENDCOLTAG",
"$COLTAG"||TABNAME||"$ENDCOLTAG", "$COLTAG"||TRIGEVENT||"$ENDCOLTAG", "$COLTAG"||VALID||"$ENDCOLTAG",
"$COLTAG"||COALESCE(TEXT, '')||"$ENDCOLTAG",
"$COLTAG"||COALESCE(REMARKS, '')||"$ENDCOLTAG", "$ENDROWTAG"
from SYSCAT.TRIGGERS
WHERE TRIGSCHEMA = '${SCHEMA_NAME}'";
if [[ $? != 0 ]]; then
echo "No triggers found.";
fi
# The for GET Promary Key CONSTRAINT QUERY. */
echo "Get all primary keys for schema $SCHEMA_NAME";
primarykeysFile="${SCHEMA_NAME}/""primarykeys.dat";
db2 -x +o -r $primarykeysFile "select "$ROWTAG", "$COLTAG"||X.CONSTNAME||"$ENDCOLTAG", "$COLTAG"||X.TYPE||"$ENDCOLTAG",
"$COLTAG"||X.TABSCHEMA||"$ENDCOLTAG", "$COLTAG"||X.TABNAME||"$ENDCOLTAG", "$COLTAG"||Z.COLNAME||"$ENDCOLTAG",
"$COLTAG"||CHAR(Z.COLSEQ)||"$ENDCOLTAG", "$COLTAG"||COALESCE(X.REMARKS, '')||"$ENDCOLTAG", "$ENDROWTAG" from
(select CONSTNAME, TYPE, TABSCHEMA, TABNAME, REMARKS from SYSCAT.TABCONST where (type = 'P' OR type = 'U')) X
FULL OUTER JOIN
(select COLNAME, COLSEQ, CONSTNAME, TABSCHEMA, TABNAME from SYSCAT.KEYCOLUSE) Z
on
(X.CONSTNAME = Z.CONSTNAME and X.TABSCHEMA = Z.TABSCHEMA and X.TABNAME = Z.TABNAME)
WHERE X.TABSCHEMA='${SCHEMA_NAME}'
ORDER BY X.CONSTNAME";
if [[ $? != 0 ]]; then
echo "No primary keys found.";
fi
# The for GET Check constraints QUERY. */
echo "Get all Check constraints for schema $SCHEMA_NAME";
constraintsFile="${SCHEMA_NAME}/""checkConstraints.dat";
db2 -x +o -r $constraintsFile "SELECT "$ROWTAG", "$COLTAG"||A.CONSTNAME||"$ENDCOLTAG", "$COLTAG"|| COALESCE(TEXT, '') ||"$ENDCOLTAG", "$COLTAG"|| A.TABSCHEMA||"$ENDCOLTAG", "$COLTAG"|| A.TABNAME ||"$ENDCOLTAG", "$COLTAG"|| COLNAME ||"$ENDCOLTAG", "$ENDROWTAG" FROM SYSCAT.CHECKS A , SYSCAT.COLCHECKS B
WHERE A.CONSTNAME = B.CONSTNAME AND A.TABSCHEMA = B.TABSCHEMA AND A.TABNAME=B.TABNAME AND A.TABSCHEMA = '${SCHEMA_NAME}'";
if [[ $? != 0 ]]; then
echo "No check constraints found.";
fi
done < "schemas.dat"
# GET PROCEDURES QUERY. */
. getProcedures.sh schemas.dat
# The for GET Foreign Key CONSTRAINT QUERY. */
. getForeignKeys.sh schemas.dat

Integrating datamining third party tools into APD

Hello everyone,
I'm looking for any documentation about the integration of third party tools of datamining into the Analisys Process Designer (APD) of SAP Business Intelligence.
If you have experience, documents or links about this topic please let me know.
Also i'm looking for a list of certified third party tools vendors for APD.
I would appreciate your answers.
Thanks!

Hi,
Check in SAP help portal..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
http://www.bi-expertonline.com/archive/Volume_02_(2004)/Issue_05_(May)/V2I5A3.cfm?session=
Thanks
Reddy

*URGENT* importing third party package into Jdev project

hi,
our company has bought a thrid party package instead of developing one to speed up the project pace. Some how we cannot import the package into our project environment,
this is what we do with the package.
set the class path to where the *.jar files are, for example: C:\AccBank\beta\creditcheck.jar
please note that the "C:\AccBank\beta\" is where the project file locates.
and follow is the import statement
import thirdparty.package1.*;
please tell us what did we do wrong, if the case in question is not clear, please tell us the steps we need to do to import and use a third party package with JDev.
Also, please tell me the different purpose between the directory :
PROJECTFILES and CLASSFILES under the main project directory
Thank you very much for your time and your help
Augustina
null

Hello,
I'm not sure about what you mean,
but in order to use a given package within JDevelopper, you should:
- select project/project properties,
- find the libraries tab
- click "add", then "new"
- click "class path"
- click "add ZIP/JAR" and add the various jar files you want to include
Note: if the included libraries contain subpackages of packages like javax, and you want to deploy your project (as EJB for instance) you will have to edit the deployment profiles in order to add the 3rd party libraries, otherwise, these subpackages won't be deployed (by default, packages suvh as java.lang, javax etc.. are not excluded from the deployment).
about the PROJECTFILES and CLASSFILES items, they refer to the directories in which your project's source code (PROJECTFILES) and compiled classes (CLASSFILES) are stored
Hope this helps, Remi
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Augustina:
hi,
our company has bought a thrid party package instead of developing one to speed up the project pace. Some how we cannot import the package into our project environment,
this is what we do with the package.
set the class path to where the *.jar files are, for example: C:\AccBank\beta\creditcheck.jar
please note that the "C:\AccBank\beta\" is where the project file locates.
and follow is the import statement
import thirdparty.package1.*;
please tell us what did we do wrong, if the case in question is not clear, please tell us the steps we need to do to import and use a third party package with JDev.
Also, please tell me the different purpose between the directory :
PROJECTFILES and CLASSFILES under the main project directory
Thank you very much for your time and your help
Augustina <HR></BLOCKQUOTE>
null

Migrating Third Party Data into E-Recruiting

Similar Messages

Maybe you are looking for