Local Copy of Third Party Data

There has been a serious proformance issue with a web application we are releasing soon. The problem is that we are displaying some third party data ( stock rates of each day) taken from some other sites. This is making the application remarkably slow, as the rates need to be displayed in more than one pages.
Is there anyway to keep local copy of such data, or any other way to enhance performance?
Thanks in Advance.
Sudarshan

It is difficult to overemphasize Roger's advice in his last sentence. I've owned all manner of Apple gear over the years and have been incredibly lucky - I never quite got over the "remove from box, connect pieces, turn on" mantra from the early days, even as the process got more and more complicated. And even though I am now retired, I was an IT professional who knew almost innately that the key to keeping things going was to have an adequate backup strategy. Yet at home I basically trusted that my various and sundry disk drives would somehow take care of themselves well enough to not need to be backed up. All of that went well (except for some bumps during the cutover to MobileMe) until this past Friday, when I somehow managed to screwup a sync process and watched in horror as my calendars slowly disappeared from iCal. Thank God for the upcoming iCloud - I had just make a disk image of my entire laptop in preparation for cutting to iCloud from MM and so could retrieve the calendars from there. It took me a while to figure out that I couldn't just copy the Calendars folder out of the disk image and expect to be back on the air. Thanks to the patience of one MadisonP, who provided a detailed procedure for recovery, I'm now back to business with a BIG lesson learned. I've probably got too many calendars and so the backup (export) of of the total bunch seemed like a daunting task, but it beats missing important appointments that you can't remember after your calendar bites the dust.

Similar Messages

Store third party data with annotation or document .

How i can store third party data(data may be string value ) with pdf annotation or document using c++ plugin API's ?
Thanks ..

You can use the Cos APIs to add custom fields to any PDF object. Just be sure to use second class names as described in ISO 32000-1:2008

Getting BW and third party data source into SAP Cloud for customer

Hi Experts.
I have an architecture question and would like to know any guidance or pointers to help. We have a requirement to integrate 3rd party data sources to be brought into SAP cloud for sales so that reporting can be driven out of SAP cloud for sales. What is the best approach to do it.
Client doesn't want users to go to another site to look for reporting data.
Worst case scenario, is there a way to show BW or Third party reports in a separate tab where we can fetch the report data for user or may be a redirect link displays home page of reports under new tab without user leaving the cloud for sales application.
Thanks
Apoorva

Hi Vivek/Mithun,
I have brought in data from BW system to C4C using Webservice and stored it in C4C backend.
I am building a custom datasource from these variables, but I want to restrict access of this data based on user roles.
However, while creating the datasource "Enable Access Control" checkbox is not enabled. The help text says "To enable access control your BO must contain an association marked as relevant for access control".
Could you help me in understanding how can we enable this feature for our custom datasource?
I have also raised a separate thread also for this query Require more details on "Enable Access Control" feature of Data source
Thanks and Regards,
Manasi

Integrating Third Party Data with BI Apps

Hi,
I have had a couple of inquiries from customers interested in BI Applications, but who want to integrate their reporting with data from other operational systems.
My question is: what is our recommended best practice for this scenario. Would we recommend customers to maintain two separate data warehouses with a single BI Server pointing to them and do the 'integration' at the enterprise model layer; or would we recommend the incorporation of their operational data into the BI Applications DW?
Obviously there are pros and cons for each and I would be interested to hear your views on these, understand what the implications are, and understand what our recommend approach is.
Thanks,
JOHN

I am not sure of any standard integration programs specific to recruitment, but through customization we can integrate third party rectt systems like People click, HRP etc.
Develop inbound programs with ALE-IDOC system to transfer the data to Rectt tables.
The switch will control activation of integration between the systems.
If this helps, pl do reward.
Thanks
Narasimha

"Item Texts" copying from third-party PR to PO?

I am creating a third party sales order (item category TAS). Here, I give some 'Material PO text' manually and save the TPO. (Select Item -> Menu Goto > Item > Texts).
The resulting PR has the same text copied.
Now, when I convert this PR into PO, the text is NOT getting copied.
Any idea how can this be done?
null

Hi Neetu
you have to mainatin Item text and not for material PO text...
Do these settings:
SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
then check you should have a entry for "Item Text" if not then
Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
please confirm if these settings are already there?
regrds
yogesh

Acknowledgement from third party data base using receiver jdbc adapter

Hi ,
I've a scenario where I'm sending material master data to third party database using an automated scheduled prgram in R/3 , i've used asynchronous abap proxy to receiver JDBC scenario. But now they are asking to design in such a way that there should be an acknowledgement to the sender if data has not been updated in database.
pl help me how to design the above .
pointe will be rewarded
thanks
mojib

Hi mohammad,
In the design (IR) when u r specifying the messages interface define it has synchronous message there u will get the reponse message tag below the actual message interface. Here you can define the reponse message frm the thrid party if the message got failed.
Try do this with help of integration senario in which u can define the reponse(which is failed) also..............
Regards
Sai
READ RULES OF ENGAGEMENT
DON'T ASK FOR POINTS
Edited by: Prateek Raj Srivastava on Mar 26, 2010 2:17 PM

Local transaction with third party jdbc?

I am trying to use bean managed transction in my application,
and using Sybase jConnector5.2 jdbc driver with iPlanet6sp2.
Transaction Manager configed local.
The transaction always can not roll back successfully,
Anyone kindly give some ideas...
Thanks

Du Xiao,
By "bean managed transction", are you referring to UserTransactions?
If so, your problem may lie in the autoCommit attribute of the Connection (or PooledConnection) object that you are using in your bean. Check to see if the autoCommit attribute is set to true or false on your connection.
If you are using UserTransactions, you should probably do connection.setAutoCommit(false) as you as you check out the Connection object. Without this code, your DML statements may be getting committed automatifcally even when you don't want them to, resulting in transactions that you can't roll back.
JC
Du Xiao Fei wrote:
>
I am trying to use bean managed transction in my application,
and using Sybase jConnector5.2 jdbc driver with iPlanet6sp2.
Transaction Manager configed local.
The transaction always can not roll back successfully,
Anyone kindly give some ideas...
Thanks

Migrating Third Party Data into E-Recruiting

Hello,
We are begining to look into migrating data from our old applicant tracking system into our currentE-Recruiting 6.0 SP10 system. The old applcant tracking system is called Personic and uses Oracle as it DB. We are considering doing this project in-house. Is there anyone who has done such a project that might have some ideas on a good place to start?
Thanks!
Ryan

Hello Ryan,
I think it will get difficult for you to find someone who ever did this. Usually the data of recruitment application is ranked this low that companies do not migrate the data. The cost / output relation is often considered as no effecient. When e-recruiting is your first real online recruiting application it is no problem to have all applicants entering their data. Only if you already have an real online tool (here i am not sure about Personic) it might be a bad public relation if applicants have to enter all data again. Even the customers changing from SAP recruiting (PA-RC) to e-recruiting (PA-ER) avoit migration.
Some are outfading the old system meaning they set a date where they publish all new requisition through the e-recruiting. All old positions are run in the old system till completed all new one use the new system. This is no real problem as e-recruiting is no payroll where having 2 half payment runs would be a real issue.
Others try to change in a low hiring period and move only some necessary applicants. This is then done by some interns / datatypists who just hack all data in. This is cheaper than running a large migration project.
If you really decide for migrating whatever the reasons are you start like in every data migration project. You take the Personic data model and the e-recruiting data model and you map the data. Decide which data can be moved directly, which data needs transformation and which data might be excluded from migration as it does not fit the data model.
When you have done this you can start thinking about technics. A first entry point for this might be the ALE Inbound for SAP HR Master data to create internal applicants for employees as this doing something similar it maps the SAP HR masterdata model to the e-recruiting one.
Of course you should already have a high knowledge of the e-recruiting datamodel at this point (probably derived from the data mapping activities).
To be honest I am not really sure if you will be happy with this entry point as the code is quite confusing but I cannot imagine another one. You have also take in account that e-recruiting uses a complete different programming model than the other PA components - PA does not use ABAP OO and does not use other components to store data. So knowledge from HR will not help very much. I'd probably take a SE80 and just write 3 or 4 reports from the scratch.
If you have some more detailed questions just ask. In general it would be very helpful to have a rough idea of how much data we talk.
Best regards
Roman

Data Acquistion Using Third Party Instruments

Hello,
I am planning to create a data acquistion system using Labview+Third Party Data Acquistion Card(from Multi-Instruments Inc). I got the attached documentation from hardware producer which expain how to create VC++ application using provied DLLs.
It should also possible to create application on Labview by using the provided DLLs. But I failed to make the first step dut to limited programming experience.
Can anyone provide any examples on this field?
Or can anyone help to create a simple application(which could show the acqured signal) using attached DLL+Computer Sound Card+Labview? So that I could follow your example as reference. The attached DLL support Computer Sound Card.
Thank you very much.
Fan Tingdong
Attachments:
vtDAQ_and_vtDAO_Interfaces.pdf ‏187 KB
DLL.zip ‏67 KB

The only open question is what did they mean writing:
"Can use the PSI, but not supported: no OAuth and no service-to-service connections"
That's written about Project online
Does anyone know the answer?
Thank you

SAP R/3 integration with (Manual) Third-party App

Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -

Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit -

Problems with the ActiveX bridge for Java beans when using third-party .jar

I encountered the following problem when using the ActiveX bridge for a java bean:
I am using JDK 1.4.2_09 and MS Visual Basic 6.0 (SP6). I wrote a java bean called ProcessViewer (my class ProcessViewer inherits from JComponent and implements the interfaces Serializable and AdjustmentListener) which I would like to use within a VB 6.0 application. I used the ActiveX bridge (packager.exe) to generate a DLL (ProcessViewer.dll) and registered it successfully. The java bean GUI-control works fine within my VB 6.0 application unless my java bean (ProcessViewer.jar) uses any third-party .jar files.
But when I tried to add a reference to some third-party class (com.sap.xxx.xxx....) I got some problems. I could solve the problem with packager.exe by setting the correct CLASSPATH. But at runtime my VB 6.0 application does not work. It crashes or it reports an error like this: "The control ... could not be loaded from axbridge.dll" (although I deployed my .jar file correctly to the directory C:\Programme\Java\j2re1.4.2_09\axbridge\bin and lib). Setting the CLASSPATH environment variable before calling my VB 6.0 application (exe) did not solve the problem.
How can I teach my VB 6.0 application (containing the Java bean ActiveX control) where to find the third-party .jar file? Copying the third-party .jar file to the JRE lib-folder or to the axbridge\lib folder did not solve the problem either.
I studied the documentation about the ActiveX bridge given at:
http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
but I am missing informations on how the third-party .jar files can be found during runtime of the ActiveX container (e. g. a VB 6.0 application).

See how to solve your problem with JNI:
http://codeproject.com/cpp/OOJNIUse.asp
More examples (for SWING) in tools setup:
http://www.simtel.net/product.php[id]95126[SiteID]simtel.net
http://www.simtel.net/product.php[id]94368[SiteID]simtel.net
http://www.simtel.net/product.php[id]93174[SiteID]simtel.net

KM Connector for Third party datasource

Hi,
I am trying to build a Repository manager for accessing third party data source. In Default we have some external repository managers, like this i need to connect our own data source. How can i proceed this? what are all the parameters need to be configured? Useful information will be appreciated.
Regards,
Malini.V

Hi,
If you want to connect a datasource to KM but this does not have a Repository Manager, then you should implement your own Repository Manager.
So it all depends which datasource you are connecting and if it already has a Repository Manager.
Check this to know how to implement custom Repository Manager:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70359931-22c1-2910-9fba-f0142ba18956
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fcc4b3c7-0701-0010-55ab-86e3ec0ce275
Regards,
Praveen Gudapati

What labview package do I need to develop third party labview instrument drivers?

We have been asked develop labview 6.1 drivers for a third party data acquisition card. What Labview package do we need to buy, basic, pro etc?

The only way to really program for a third party data acquisition card in LabVIEW would be through a "call library function node". You would have to call the dll that third party card developer provided. As far as I know all LabVIEW packages contain a "call library function node". I would recomend buying at least the full development environment because of some of the additional features in that package.

Email notification for external third party feed downtime

Hi All,
I have a SOA application consisting of a web service which receives feed from third party system. Normally the third party sends 200 messages a minute. I want to implement a functionality such that if the web service does not receive a single message in 5 minute, it will trigger an email notification to the system admin that the third party data feed could be down. How do I implement this in SOA 11.1.1.4
Thanks

hi Dave,
check this
E-mailing functionality on a process chain
right click on process type that will email if fail/success, 'create message', in next screen maintain the recipient list and subject also body of message
hope this helps.

JDev Internal CVS problem: no indication that local source is out of date

Hi,
I have a situation where two people are coding an ADF BC / Faces project and both developers are editing the model, modifying the same AM etc.
When one developer commits their changes to the CVS, the other developer has no indication that their copy is now out of date with the CVS. The incoming changes is set to run every 5 minutes and definately runs, but there is no way of knowing that a local copy is out of date. Is JDev meant to do this or is something not configured properly?
Aside from updating each object every single time prior to make a change to it, is there any way that JDev can change the CVS Icon on each object if it is different than the CVS?
What does the "Finding Incoming changes" do if it is not meant to flag files as out of date?
regards,
Brenden

So far this is not working well at all. We are spending a lot of time fixing problems caused by one or more files for each object being out of date. We are having to do a force unchanged commit to get rid of the 'mixed states' status on some objects.
The delete from CVS also completely hangs JDev on both developers PC's as wll as stuffs the AM definition.
can anyone recommend an alternative that they have had success with?

Local Copy of Third Party Data

Similar Messages

Maybe you are looking for