Migration 5.0 to 10g how to keep it at run-time

Hi, all.
I have the 9i at the company and we're creating a new project for electronic invoice and the file must be '.xml'. We've used forms and reports only. We'll probably migrate our db and its tools to 10g.
My question is: can my applications run at run-time in 10g like 9i? I mean, 10g is focused on the web and all of our applications working at the forms/reports run-time. Someone have told us that it'll not work out 'cause 10g runs in the browser and not as a application alone.
Must I convert all my applications to run only in the browser?
Could someone help me in this issue?
Thank you for some help.
Regards,
Anderson

Keep in mind that Forms 5 was never certified to run against a 10g database, you'll face some problems and Forms 5 is no longer supported, hence no support from Oracle.
Migrating your Forms application from Forms5 to 10g should be very smooth, the only thing you need to be careful of is built-ins that interact with the client machine (HOST, TEXT_IO etc.....) in 10g Forms are web deployed they are in 3 tier architecture, these built-ins will run on the Application server and not the client machine.
To run these built-ins on the client machine you need to use webutil's function (CLIENT_HOST, CLIENT_IP etc...)
You can simply migrate your Forms to Forms 6i and than to 10g.
I suggest you migrate your application, read the [Forms Upgrade Center|http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html] there are many white papers and documents that can help you.
Tony

Similar Messages

Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.

Can someone please send me some tips on how to keep my G5 running quickly?

I'm looking for some great tips on how to keep my G5 running quickly and smoothly. I'm new to owning a MAC and PC's have a disc clean-up and defragment program (among other thing) that I used constantly to keep things running smoothly. Thanks for your help!

Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption.
Doing the other things in there may help.
Here's his maintenance link so you can start a monthly maintenance program, if you haven't done so already.
Cheers!
DALE
Message was edited by: Dale Weisshaar

How can I test the running time of a method?

c.What is the running time of your method smallest, as a function of n, the number of elements in the list? Use big-Oh notation.
I quoated from a java problem..
Anyone can tell me how I can test the running time? Thanks ! :D

it depends on what is in the method. For example a for loop executed n times would have a O(n). A double for loop (each loopp run n times) will have O(n^2). Do this: determine how many times each loop in the method is run. This is the first term in your runtime equation. Do this for all other loops in the method and add them all together. Most other statements that are not iterative should have a constant runtime so O(1). For conditional statements, the runtime depends on the most time consuming portion of the statement. Once all these are added together, take the O(equation) which should just leave the biggest term. i.e. O(5n^2+3n+8) = O(n^2). Hope this helps.
note: this does not apply to recursive methods

I keep getting a run time error on my elements 11 photo editor when trying to upload a photo

I keep getting a run time error on my elements 11 photo editor when trying to upload a photos?

Please try updating to version 19.0
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Algebra CD keeps displaying "Script run-time error" when I try to open it

I have a CD that came with my Algebra book (I bought it used) for Technical School and it keeps displaying Scrip run-time error when I try to open it. I have updated Quick-time player, just in case that was the problem.

b noir wrote:
Is CoreGraphics.dll cited in the iTunes events?
Also check for error events happening a few seconds prior to the iTunes events. Open those events. Do they all cite the same .ttf file? If so, what's the precise spelling of the .ttf (font) file?
YES! There is a CoreGraphics.dll cited in the iTunes event. This is what exactly the window said
"Faulting application iTunes.exe, version 9.0.3.15, faulting module CoreGraphics.dll, version 1.0.60.0, fault address 0x00266560."
For the .ttf file, this is what it showed.
"Windows cannot access the file C:\WINDOWS\Fonts\ARIALUNI.TTF for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program ARIALUNI.TTF because of this error.
Program: ARIALUNI.TTF
File: C:\WINDOWS\Fonts\ARIALUNI.TTF"
I hope this will help. I still cant open iTunes.

How to keep MacBook Pro running ...

Hi everyone!!
New to MAC world, bought it 2 months ago, I want to keep my MAC running fast and smooth as it is right now, WHAT IS THE BEST WAY to keep it that way?
I have search around blogs,ppl have different point of view.
Someone said all I need is to follow this:
1 Make redundants backups
2. Keep your software up to dat
3. Don't install crapware,
4. Beware of trojan
I have read ppl say MACs don't really need mantenace, few if any, THEN others says they need maintenance.
If they dont really need maintenance, how do old files get rid of itself?
I need to know what is the best program or what should I do to clean old files or unwanted files out of the system to keep it clean and fast.
Sorry if this has been posted before.
Thank you!

I've had my mac for 3 years and it is just as speedy as the first day and have done nothing on my own. It takes care of itself. It's a good idea to restart it at least once a month to dump the cache. What old files are you referring to? I delete the old ones I no longer need.

How can I delete a "Run Time Air" from my mac book pro

how can I get rid of the "Run Time Air" on my Macbook Pro

Welcome to the Apple Support Communities
If you use Snow Leopard, open iTunes, go to iTunes Store in the iTunes sidebar and log out

Western Digital External Hard drive keeps undocking when running time machine.

I have been using a 2TB Western Digital My Book external hard drive for about a year now to run time machine and backup my files. The past month I have noticed that my backups have been failing. I try and for a backup and about halfway through it gets "delayed" because of an error. Then I have a alert pop up on my desktop with the following message:
The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off.
The disk was not unplugged from the power supply or the usb port. I am stumped. Anyone know what is going on and how to fix it??

I would avoid WD, Seagate, LaCie, and Iomega external drives, and any drive with special features such as networking or built-in backup software.

How to design report at run time SSRS

most of the time we point store procedure or table and then SSRS report designer show us field and we just drag drop those field on to report designer surface. after all we call those report programmatically and pass parameter and report shown on report
viewer.
now my company want that customer will customize the report who will see the report. they want to display all the fields in a form and just customer will select each field and place on report designer surface and give some input like filter condition like
date range or employee id etc and report will be shown. also at run time if customer want they can add text or move existing field etc.
i do not have any idea how could i do this with SSRS. if this is possible with SSRS then please guide me in such a way as a result i can start the job or if possible give me few relevant url of that kind from where i can get the idea. thanks

You can also use report builder application to get most of these functionality. For that you'll just create and deploy a report model with required attributes from involved entities.
Then use can consume the model within report builder and add required fields to report,filter etc
see below videos for more details
http://technet.microsoft.com/en-us/sqlserver/dd430326.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to instantiate classes at run time with constructors having arguments?

I have to instantiate some classes in the run-time because they are plugins. The name of the plugin (pluginClassName) comes from a configuration file.
Currently I am doing this to achieve it:-
UIPlugin plugin = (UIPlugin)Class.forName(pluginClassName).newInstance();However, there is a disadvantage. I can not pass arguments to the constructor of the plugin.
public class RainyTheme extends UIPlugin {
public RainyTheme() {
   // bla bla
public RainyTheme(int x, int y , int width, int height) {
   // set co-ordinates
   // bla bla
// bla bla bla bla
}Now if I want to instantiate this plugin at runtime and at the same time I want to pass the 4 arguments as shown in the second constructor, how can I achieve this?

I have no experience with JME and the limitations of its API, but looking at the API docs ( http://java.sun.com/javame/reference/apis.jsp ) it seems that there are two main versions, CLDC and CDC, of which CLDC is more limited in its API.
The Class class does not contain the methods getConstructor(Object[]) or getConstructors() in this version ( http://java.sun.com/javame/reference/apis/jsr139/java/lang/Class.html ), so it seems that if you are using CLDC then there is no way to reflectively call a constructor with parameters. You'd have to find another way to do what you want, such as use the noarg constructor then initialise the instance after construction.

How to Load Classes in run time - Urgent

Hi All,
How to Load a class file from a .jar file in JDK1.1 with out using URLClassLoader. I have tried to extract the .jar file by file input stream and zipEntry classes and defineClass using the bytes i got from the stream , but the class loader fails to take the classes that are already loaded in the system.
The customClassLoader that i created was not able to assign an object to the another reference variable that already in the JVM.Please i want to know how to assign or communicate between the objects of CustomclassLoader and SystemClassLoader?
Please help me in this regard.
Thanks in advance,

Hi,
The above code works in the straight way if the class is available in the classpath.
I need to load a class by using custom class loader that i extends from classloader base class .
I have to read a class file from a .jar file (in server) and load it in run time.Here i am able to read the bytes from the .jar file of the specified class file, but the class that i read extends some other class that is already loaded when i tried to create newInstance of the class i get Exceptions. Here the custom classLoader cannot find the loaded existing class in the JVM.can i get a solution for this situation

How to change options in Run time menu while labView was running

Hello Good Afternoon,
I m Using LabView 8.5.How to change the options in Run time menu for any control while Labview was running
Thanks
Jai
Jayavel
Solved!
Go to Solution.

Hi Jai,
Try the below attached VI and let me know if u still need some explanation.
Rgds,
Venky
Attachments:
Run Time Menu.zip ‏6 KB

How can I uninstall Labview run time engine from the machine?

I understand that Labview has not given any provision to show customized 'License Agreement screen'. Isn't it? This is the main cause of my problem. Since I want to show our own license agreement (LA) screen, I made the one using Labview. To show this license agreement screen, I first install a small application which has only this LA screen with Labview run time engine. The customer can see License Agreement Screen with Labview Run Time Engine on his machine. If My customer accepts the LA, I will install the main application further by calling another setup.EXE file.
If my customer selects 'Do Not Agree' to the LA, I will quit the installation process. Here I also want to 'uninstall' Labview Run Time Engine
from his machine since he doesn't accept License. I would like to know how to uninstall Labview run time engine from his machine?
Another way which I could think is to run the LA screen from the CD with Labview run time engine on the CD. I will start installing the main S/W to the customer's machine with LABview Run Time Engine only after he accepts License agreement. I would like to know how to run the Labview application from CD without installing run time engine on the target machine?
Can anyone suggest solution to my problem?
Thanks,
Chander

J-Tek,
I would suggest re-installing the Run-time Engine and then uninstalling it after a reboot. Also, you can download a program called Msicuu.exe (for NT, 2000, XP or Msicu.exe for 9x) to help clean up the registry for uninstalled programs.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How to install database in run time

hi all
i want to ask if i can install database as run time only and in this case how i can logon the sql ?,i want to install it as run tim such as developer 6 run tim
is this possible?
thanx

first thank you for helping me
and i will try to explain what i want to do in more details
i'm using oracle database9i with developer 6i and i want to deliver an application was mad by this tools i know that i should setup the database and forms runtim only in at the customer computer the application -at the first- will work at only on one computer ,this computer will run as the client\server
my question is
if i can setup the database as run time only or i must setup complete at the customer computer?
i tried to do that by choosing this option when installing database
1-Oracle9i Client 9.2.0.1.0
2-Run tim
but after making this i can't connect with database
i hope that if i can explain what i want to do

Migration 5.0 to 10g how to keep it at run-time

Similar Messages

Maybe you are looking for