Migration CAN´T PARSE BIG PROCEDURES!!!!

Migration can´t parse Procedures bigger than 250kb!!
How can i resolve this problem???
Tks,
Paulo Portugal.

What are you doing? Are you using AMA or OMWB? Not sure where the ceiling limit is coming from?

Similar Messages

Can't parse WSDL when useProxy=true

Hello everyone.
I'm using Flex since 1.5 and now try to migrate Flex2.0.
Most of our application need to access data via WebService,
and we use <mx:WebService> tag to access them.
In our Flex1.5 environment, we also use Proxy service of Flex
(with specifying useProxy=true), and it works fine.
But in Flex2.0, our mxml application can't parse the same
WSDL when useProxy=true!
On the other hand, our application can parse correctly when
not using proxy service. (useProxy=false and set crossdomain.xml on
the root of datasource Web server.)
I'was so confusing that I captured HTTP traffic between
client application and server( both FlexDataService and Data source
Web Server), with ServiceCapture.
When useProxy=true, at first, client application sent request
to Flex Data Service to get not only calling the SOAP operations
but also calling WSDL itself. After that, Flex Data Service
returned the response message as WSDL data, and I found the WSDL
data was broken.
When useProxy=false, of cource, the WSDL was passed
datasource Web Server correctly and application could parse it
without problem.
These parse error depends on the WebService.
I wonder this is some bug of Flex Data Service or not.......

Hello, everyone.
After that, I tried to change the encoding of WSDL, which was
broken when useProxy=true, from UTF-16 to UTF-8.
And I could get correct WSDL data from Flex Data Service's
proxy.....
It seems when the encoding of WSDL is UTF-16, the parse is
failed, but I'm not sure this problem is happened commonly and this
is some of the bug of Flex Data Services.

Flash can not parse this document

I have just had a Flash CS5 file corrupt on me. It comes up with this error message: 'Flash can not parse this document'. This is the second time this has happened to one of my Flash CS5 files. My colleagues have had problems with their files too and we bought a bit of software called 'Sothink SWF decompiler'. This has been a useful way of getting Flash files back from swf's however this has not worked with my file today. It doesn't work perfectly with other files anyway as it looses all of the library names and layer names, a big problem with a complex file.
So my questions are
1. can you help me get my file back?
2. I don't recall having any problems with SC3 so what has happened in these later version to cause this dreadful problem? One of my colleaguse has had 40% of her files corrupt sinse using CS5.
3. Then can you tell me whether this problem, that has exsisted in Flash since CS4, will be fixed in CS6 as we will be upgrading when it becomes available?
4. When is Flash CS6 going to become available?
Many thanks

You're all very unlucky to get this problem. I don't know why you guys got the error when transitioning from Flash CS4 to CS5. My transition went perfectly fine, and the game I was developing went through perfectly clean.
Sorry about your problems
dikuno <><
P.S. By the way, that file that was mentioned "textLayout_1.0.0.595.swz", is created whenever you put in TLF text that is edited at runtime via ActionScript and use Runtime Shared Library (RSL) preloading. Did you leave all your text boxes be, or convert them all to TLF?
P.P.S.S. I was very lucky that I didn't lose my project when I transitioned, as my current game is actually due in around a week. Hoepfully none of your projects that you lost are due in a week.
P.P.P.S.S.S. Imagine if this happened to Alan Becker while he was working on Animator vs. Animation II (it took him five months).
P.P.P.P.S.S.S.S. I feel especially sorry for the guy who spent three months on his online multiplayer real-time game. Must be a real shame to lose all your work after all those late nights and sore backs...
P.P.P.P.P.S.S.S.S.S. If you don't know what Animator vs. Animation is, you should watch the animations. You can find them on YouTube - just look up "Animator vs. Animation" and "Animator vs. Animation 2".
P.P.P.P.P.P.S.S.S.S.S.S. Sorry about all the PostScripts.

Can not see Stored Procedures owned by "Code Owner"

Post Author: BinChen
CA Forum: Deployment
I am using Data Source defined with "CR Oracle ODBC Driver 5.0" in "Data Source (ODBC)".
But in Crystal Report XI, I can not see CodeOwner when I can created a new connection using ODBC (RDO).
I can see CodeOwner and all SP defined under it when I use "Oracle Server" directly or use sqlplus.

Post Author: BinChen
CA Forum: Deployment
I'm using Window XP with Oracle 10g2R
To be more clear,
I have an ODBC Data Source defined as "DEV" and when I created a connection using ODBC, I can only see some database account section like: APP, APPREF, PUBLIC, SYS, SUSTEM. But I can not see CodeOwner.
If I connected without using ODBC, I can also see CODEOWNER and then all its stored procedures.
So why I can not see Stored Procedures defined under CODEOWNER using ODBC?
I have an exsiting report, even I can not see CODEOWNER, but I have no problem to run and preview the report also to "verify database".

How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?

Hi
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like : exec test @p = p. So the exec test may
be run parallel. But I am not sure if it works.
Any idea is really appreciated.

Hi nam_man,
According to your description, you want to call stored procedures in parallel, right?
In SSIS, we can create separate jobs with different stored procedures, then set the same schedule to kick the jobs off at the same time. In this way, we should be careful to monitor blocking and deadlocking depending on what the jobs are doing.
We can also put all stored procedures in SSIS Sequence container, then they will be run in parallel.
For more information about SSIS job and Sequence container, please refer to the following documents:
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
https://msdn.microsoft.com/en-us/library/ms139855(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

I've doubled my RAM but still can't save big files in photoshop...

I have just upgraded my Ram from the shipped 4GB to 8GB but I still can't save big images in photoshop. It seems to have made no difference to the speed of general tasks and saving and I can't save big files in photoshop at all. I already moved massive amounts of files off my computer and onto my external hard drive, so there is much less in my computer now, and twice the RAM but it is making no noticeable difference. When I click memory, under 'about my mac' it shows that the RAM is installed and now has twice the memory. Could this be something to do with photoshop? I'm running CS6.

Also, I just calculated 220 cm into inches and this is roughly 86.5 inches. Over 7 feet in length.
WIth an image that large, you may want to consider down sampling to a lower DPI to help with being able to work on and process images of this size much easier and it will be easier for your Print house to process, as well.
You might want to consider working with these rather large images at 225 DPI instead of 300 if resolution at close distances is still a concern.
Or what you good try is working with the images at 300 DPI, but then save them/export them as a Jpeg image at the highest image quality setting.
I do a lot of project where I use a high resolution jpeg image to save on image proceesing overhead.
The final printed images still come out pretty clear, clean and crisp without having to process those large files at a print house or having to deal with using that full resolution image in a page layout or illustration program.

How we can configure new pricing procedure at the time of billing document

Hi SD Gurus,
Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
Thanks & Regards,
Sreenivas.P

Hello,
Why?
The sales order confirms the price given to the customer. If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
Regards
Waza

Mail Receiver Error: java.lang.IllegalArgumentException: can't parse argum

Hi everybody,
I get the error in mail receiver CC:
java.lang.IllegalArgumentException: can't parse argument number
My Payload looks like this:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>The subject</Subject>
<From>mailadress</From>
<To>mailadress</To>
<Content_Type>multipart/mixed; boundary="AaBb--984dfgeSSd3532"</Content_Type>
- <Content_Description>
<attachment filename="Filename.txt">content_of_attachment</attachment>
</Content_Description>
<Content_Disposition>attachment</Content_Disposition>
<Content>Constant</Content>
</ns1:Mail>
Any ideas?
Regards
Mario

Hi Mario..
Go thru this thread for it.
Error Catagory : XI_J2EE_ADAPTER_MAIL
Regards

Can we call a procedure in select statement?

Can we call a procedure in select statement?

Hi,
Raghu_appsdba wrote:
Can we call a procedure in select statement?No. You can call functions, but not procedures.
If the procedure does not change the database state (for example, it doesn't update any tables), then you can wrap it in a function, or re-write it as a function.
Here's an example of wrapping.
CREATE OR REPLACE FUNCTION fun_x (in_txt IN VARCHAR2)
RETURN VARCHAR2
IS
BEGIN
        proc_y (in_txt);
        RETURN in_txt
END     fun_x;

Can we call a procedure within function?

Can we call a procedure in function?
If yes, then please explain with example.
Thanks
Aman

Why don't you try it?
SQL> set serveroutput on
SQL> declare
2   procedure p1 (
3    i1 in out number
4   )
5   as
6   begin
7    i1 := 200;
8   end p1;
9   function f1
10   return number
11   is
12    l1 number;
13   begin
14    p1(l1);
15    return l1;
16   end f1;
17 begin
18   dbms_output.put_line(f1);
19 end;
20 /
200
PL/SQL procedure successfully completed.
SQL> set serveroutput off

Can't parse configuration jsf-ri-runtime.xml

When I try to do the Example about JSF in (How To Use JSF with JDeveloper 10g) and run it I found this problem
SEVERE: Can't parse configuration file:classloader:/com/sun/faces/jsf-ri-runtime.xml
and I have jDeveloper ver 9.0.5.2
and java ver 1.4.2.04
Plz Help
Alaa

I installed the 9.052 build of JDeveloper and it solved the problem. Per forum thread: Re: JSF Configuration error in JDeveloper10g

Can't parse configuration file

hi i'm trying to deploy an application on oc4j 10.1.3.1.0. i use Eclipse IDE and ant for deploy.
i have this:
[java] java.rmi.RemoteException: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:420)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:585)
[java] at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
[java] at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
[java] at java.lang.Thread.run(Thread.java:595)
[java] Caused by: oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml
[java] at com.sun.faces.config.ConfigureListener.parse(ConfigureListener.java:1224)
[java] at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:321)
[java] at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1130)
[java] at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
[java] at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
[java] at com.evermind.server.Application.getHttpApplication(Application.java:545)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
[java] at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1606)
[java] at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:238)
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:418)
[java] ... 7 more
[java] Error: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml

I had similar problems with jsf-impl.jar.
Sun do provide the xsd schemas locally inside the jar files so internet connection
should not be required if parser is configured right.
In my case I removed commons-digester-1.6.jar from my application and replaced it
with commons-digester.jar supplied by JDeveloper builtin library named Commons Digester 1.5.
Digester was configuring the (oracle) xerces parser.

Why I'm getting the jxls Error : Can't parse an expression rm.exec

Hi,
I used the RowSet in JXLS and it's working perfectly, but I'm getting Error when I use the SQL Reporting in JXLS
Error : java.lang.RuntimeException: Can't parse an expression rm.exec('select name from Designer' )
My Java File :
package net.sf.jxls.report;
import net.sf.jxls.exception.ParsePropertyException;
import net.sf.jxls.transformer.XLSTransformer;
import net.sf.jxls.report.ReportManager;
import net.sf.jxls.report.ReportManagerImpl;
import java.sql.*;
import java.util.Map;
import java.util.HashMap;
public class QReport {
private static String templateFileName = "examples/Report/QReport.xls";
private static String destFileName = "examples/Report/QReport_Out.xls";
public static void main(String[] args) throws Exception, ClassNotFoundException, SQLException {
if (args.length >= 2) {
templateFileName = args[0];
destFileName = args[1];
try {
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
     Connection con = DriverManager.getConnection("jdbc:odbc:NewDB");
     Map beans = new HashMap();
     ReportManager reportmanager = new ReportManagerImpl(con, beans);
     beans.put("rm", reportmanager);
     XLSTransformer transformer = new XLSTransformer();
     transformer.transformXLS(templateFileName, beans, destFileName);
}catch(Exception e){
     System.out.println("Error : "+e);
The Excel file as follows
<jx:forEach items="${rm.exec('select name from Designer' )}" var="design">
${design.name}
</jx:forEach>
Thanks in advance.

Hi,
I don't know JXLS and this for sure is the wrong forum to ask this question (I suggest to discuss problems with the source code originator at Sourceforge), however
${rm.exec('select name from Designer' )}"
can't work because by definition, Expression language doesn't take arguments. There is only one option to pass an argument to Expression Language and this is when the method you access in fact is a wrapped hashmap. So my assumption is that the exception occurs because of the wrong use of EL.
If you looked at the sample on SourceForge you could see that I am right
http://jxls.sourceforge.net/samples/tagsample.html
Frank

Can I parse Text files in Java Script to populate in select boxes.

The scenario is as follows:
I have two select boxes, the second one depends on the first one for its values.
Values corresponding to the selection made in the first select box are available in a text file.
Can I parse the text file to fill in the values in the second select box through javascript?
Can any one please help.
Thanks,
Ramesh

This isn't a javascript forum. Java is not Javascript and Javascript is not Java.
If you actually meant Java...the answer is "maybe, depending on what you're doing".

Getting Error: java.lang.IllegalArgumentException: can't parse argument 0

HI All,
I am implementing the Message Pool in NWDS.
I have two InputFields: Firstname and Lastname.
and i have a method name: CheckMandatory which takes one argument as String.
I have implemented this Method in the StartView. Now when i am leaving this fields empty and pressing the Go Button.
Then i am getting the Following Error:
   java.lang.IllegalArgumentException: can't parse argument number 0
So pls help me out......
Regards,
Dhruv Shah

Hi,
THis is the Stack Trace:
java.lang.IllegalArgumentException: can't parse argument number 0
     at java.text.MessageFormat.makeFormat(MessageFormat.java:1323)
     at java.text.MessageFormat.applyPattern(MessageFormat.java:447)
     at java.text.MessageFormat.<init>(MessageFormat.java:347)
     at java.text.MessageFormat.format(MessageFormat.java:800)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeFormatter.format(DataTypeFormatter.java:80)
     at com.sap.tc.webdynpro.progmodel.controller.MessageItem.getMessage(MessageItem.java:211)
     at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.InputFieldAdapter$DataTip.setMessage(InputFieldAdapter.java:1156)
     at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.InputFieldAdapter.getAssociatedAdapters(InputFieldAdapter.java:1323)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:299)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:102)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.MatrixLayoutRenderer.renderMatrixLayoutCellFragment(MatrixLayoutRenderer.java:729)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.MatrixLayoutRenderer.renderMatrixLayoutRowFragment(MatrixLayoutRenderer.java:346)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.MatrixLayoutRenderer.renderMatrixLayoutFragment(MatrixLayoutRenderer.java:302)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.MatrixLayoutRenderer.render(MatrixLayoutRenderer.java:71)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:294)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:102)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:516)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.ScrollContainerRenderer.render(ScrollContainerRenderer.java:61)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:294)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:102)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:45)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:294)
     at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.java:102)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml(HtmlClient.java:555)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse(HtmlClient.java:346)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse(HtmlClient.java:255)
     at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.retrieveData(HtmlClient.java:157)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:425)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Regards,
Dhruv Shah

Migration CAN´T PARSE BIG PROCEDURES!!!!

Similar Messages

Maybe you are looking for