After FF67 session not Generated in Sm35

Hi Experts
i m doing Manual BRS through FF67. after two times save message sowing document has been posted. but while running bath input session , no batch input has been generated , when i go to SM35..
Kindly help me in this regard.
Kind regards
Pranav Kr. Gupta

Thanks for Reply.
Posting Rule L1
Posting Area 1.
PK 40
Acct Symbol : Main A/c 11021                                         Acct Symbol 11022
Doc. Type : SA
Posting Type : 5
same way for Vendor
Posting Rule L2
Posting area 1 ,
                                                                           PK 50
    Acct Symbol : 11023                                   Acct Symbol 11021
And document Type SA
Posting Type : 4.
now another getting Error see the screen shot error
No batch input data for screen SAPMF05L 0700
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Kindly Help me.
Kind regards
Pranav kr. Gupta

Similar Messages

Batch session not generated in FF67

Dear All
I have entered some transactions in FF67 and then saved it and posted it. My processing type is 2. I have defined the posting keys for BRS and also assigned the GL account. However the system has not generated a batch input session in SM35. In the over view of the statement, system is showing an entry for IN51 as GL posted and IN01 as Not to be Posted . What could be the error?
Regards
Sanil Bhandari

Hi
With the same config and figures, the batch session is generated and posted in testing. But in prod envior i am not able to generate the session. More ever, there is no statement with the id in FEBA
Regards
Sanil Bhandari

Batch input session is not generating In BRS

Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
Ratnam

Hi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar

FF67 Batch Input session not created

Dear All,
When I am key in the manual bank statement in FF67 system doesnot generate the batch input session in SM35. In FF67 in setting - specification I have selected 2 i.e. to generate batch.
Please guide me what might be the reason.
Thanks & Regards,
Bhadresh V. Shah

Hi,
This may be customization. Check setting made in
SAP Customizing Implementation Guide> Financial Accounting > Bank Accounting > Business Transactions>Manual Bank Statement> Define Posting Keys and Posting Rules for Manual Bank Statement > Create Keys for Posting Rules
here you have to give account symbol and text. This generates the sm35 session.
Warm Regards

EWA session not created after refresh_session in SDCCN

Hi All,
I have configured EWA in our SolMan 7.1 for our managed system SAP BW 7.0, and to test it, I've been trying to create an adhoc EWA report manually. However, after the completion of refresh_session tasks in the managed system's SDCCN, no EWA session is being created.
I have already followed instructions in SAP Note 1769513 - EWA not generated - session data is overdue (red flag status), but I'm still stuck with this error.
Please advise.
Thanks.

Hi,
You are using solution manager 7.1, so here are couple on KBAs which can help you to get the EWAs.
1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1
1924199 - EarlyWatch Alert Management SP10+
Also follow the recommendations of RTCCTOOL.
To generate an Ad-hoc EWA, yo can look into this wiki.
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
Further, to understand and troubleshoot, please read the EWA workflow
The EWA workflow - a closer look - Solution Manager - SCN Wiki
I hope, all this should help you in fixing your issue.
Regards

Accounting Document not generated after Post goods issue in delivery order.

Dear Experts
Greeting of the daays,
Need your help on below issue.
After making the post goods issue ,the system is not making the accounting document.
The error given by the system is as follows:
Material document 12365 does not include an accounting document
Diagnosis
The system cannot find an accounting document for the material document 12365.
Possible reasons for this are:
The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
__Solution what I tried to solve this issue ,but not successful.__
__Solution 1- maintain OMS2__
__Solution 2 - maintain OMJJ- movement type 601 - PRCTR is required entry.__
__Solution 3 - price maintain is material master.__
__Solution 4 - OBYC - BSX - 7920 - GLA/c and GBB- VAX and VAY - 7920 GLA/c.__
__Pls let me know if there is any confirgation is missing.__

Hi
Do this checks:
In tcode OBYC check if you have the proper entries.
Go to tcode OKB9 and do the settings for the G/L acc. that you have in OBYC.
To populate PRCTR you can use OKB9 and you can check if you have values in MARC-PRCTR.
I hope this helps you
Regards
Eduardo

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer. A message pops up asking if I want to run repair. Answering in the afirmative results in another message stating files are missing. And we are back at square one.

What is the exact error? Else you could always reinstall your software.

After cancelling the billing document accounting document not generated

hi,
we released the billing and accounting document generated but customer needed changes in the billing values so we cancel the billing document but accounting document not generated(reversal accounting not happen)....in document flow it shows in cancel document in blocking state ....we try to release in VF02 but it throws the error "Client 200 does not contain an active application area" . but the other sales order we test in qulaity server the scenorio is working fine...............for specific one sales order creating problem now.....
try to solve the issue ..
Thanks
Muthuraman.D

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

COPA document not generated though after billing and accounting generations

I have an issue with one instant.
For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
COPA documents were created for entries made befor and after this particular one.
Also we have COPA documents for the product with the same customer and different customers.
Our system is 'SAP ERP Central Component 5.0'

Thanks Ajay for the quick response.
Cost element category is correctly maintained.
Condition types are mapped.
COPA is in use for more than 4 years.
Able to simulate COPA document for the Billing document without errors.
We do have COPA documents created before and after this particular transaction.
As you said raising OSS message with SAP.
Thanks

RE : IDOCS did not Generate after payment run

I have a unique issue. After APP run (ACH) all accounting entries & payment document created corectly. However idoc's for 3 vendors did not generated. There is no issue with configuration as this is not a new vendor and every month payments made off automatically. Vendor complained non receipt of payment after 10 days and I could not find the log for that day. Could anyone please give some hints what could have gone wrong if anyone is expereinced this issue. As I said earlier all config and set up are correct and infact after that one payment is made to that vendor.
Thanks
Ivan

Hi,
Once APP run completed, Vendor open items will be cleared.
You have to create IDOC using WE19.
Run the Idoc using AL11
may be your problem will be solved
Thanks
Chandra

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

/3M1 and /414 wage types not generated after maintaining IT0582 exemption

Greetings,
I am facing an issue while generating the Annual Medical Reimbursement Exemption wage type (/3M1) and Total Medical Exemption wage type (/414) for an employee. I have referred to previous threads pertaining to this issue and have accordingly performed the following steps in this regard so far:
1. I am using the wage type 9MDR to pay the medical reimbursement amount to an employee through IT0014. Following is the screenshot of V_T7INT9 for this wage type:
2. Following is the screenshot of V_T7INA9 for 9MDR wage type
3. Following is the screenshot of V_512W_D in Evaluation Class 6 section for 9MDR wage type. As per the earlier threads on this topic, I initially maintained the value 10 (Medical Allowance) for Evaluation Class 6 for this wage type. But even in that case, the /3M1 and /414 wage types were not getting generated. As a result, I am maintaining the value 20 for Evaluation Class 6 for this wage type
4. Following is the screenshot of IT582 in which I am maintaining a record in Subtype MDA for this employee:
5. Similarly, following is the screenshot for IT0014 where I am maintaining the amount of Rs.1250 against 9MDR wage type for this employee:
6. Subsequently, I am running the Payroll for this employee for April 2014. Following is the screenshot of EXM table which is the input for INMED function:
7. Following is the output after the execution of INMED function. As we can see, /3M1 and /414 wage types are not generated:
I would request the forum members to share their insights into possible reasons for this discrepancy.
Thanks

Hi
I again checked the table V_T7INT9 table and found that the tax code SMED was assigned to another wage type 9MDA (Medical Allowance) which is used to pay Medical Allowance to employees through IT0008. Following is the screenshot of the same:
I removed this entry and then executed the Payroll. Subsequently I found that the /3M1 and /414 wage types were getting generated. Following is the screenshot of the output after the processing of INMED function:
Thanks for the responses.

Profile not generated after transport.

Hi All,
We are facing an issue in which I transported a role from DEV to PRODUCTION through Q.
Our role is generated in DEV......but not in Q and Production.
As per earlier posts in the forum,I checked table PRGN_CUST in the DEV and PROFILE_TRANSPORT value is set to YES.
Also,the role was added to the transport only after profile was generated
Has anyone faced similar issues?
Peeyush.

Hi Piyeeush,
Did you found a solution to your problem? I have the same issue!
I've created a new role in Dev, created & generated the profile. Once role is transported in Quality, the profile is transported but with the status : Current version not generated.
the strangest part is that i didn't realize that directly... in the meanwhile, the role was already in used in production by a test user who didn't encountered any problem while testing!
basically, the role is now in production, used by one user who can execute all transaction listed in the role... but the profile isnt generated and the user comparison cannot be complete due to that.
any explanations?
maybe i should create a new topic tho

DME Output not Generated after Payment Run in F110

Hello,
I have a typical problem. I have been running the payment run for a Finland Company and I am not able to generate the DME data medium contents in the overview which generally appears for other company.
I have checked the Payment Method for the Country and the Format given there is FI_LUM2. And the Payment Method Workbench is selected instead of the classic payment programs. In the payment method for company code there are no forms available. I just wanted to ask whether it is mandatory to define a form at the company code level in case of a Payment Method Workbench being used in Country payment method?
About the customizing of PMW Payment Medium formats I went to the node Adjust Payment Medium Formats and then checked at standard settings for the relevant format FI_LUM2 and found that payment medium accompanying sheet was not ticked. Could this be the cause.
I don't really understand. Please help me out.
Thanks
Chetan Mahapatra.

Hi,
Run payment through F110 without putting variant name in front of RFFOEDI1.
After running F110, go to SE38 transaction and put all the detail and execute, system will tell you the reason of not generating IDOC.
Regards
K Khatri

After upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

after upgrading to NX-OS 5.04, out snmp traps monitoring system is not generating ticket / incident for the snmp traps and my question is whether we need to apply new MIBS for that?

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

After FF67 session not Generated in Sm35

Similar Messages

Maybe you are looking for