Migration from external hd with Leopard to iMac Intel

hi,
I make two clone of my old iMac G5 internal HD (10.3.9), to an external HD with two partition
and update one partition to leopard, buyed just for testing all the application CS2 p. and studio 8, all run well!
Now, i suppose i can use Migration Assistence chosing the external HD, (the one with Leopard and software tested) to import to the new iMac Intel*, what i weiting for, (*just come with Leopard installed),
without problems or is better a fresh install of CS2 p. and Studio 8, on the Intel unit?
Thanks for any suggestion
AleX

Hi Allan Eckert,
thanks in advice.
I buyed CS3 p., so i don't want migrate CS2 and Studio 8 on the Intel unit, but only the user.
I precise, when i updated one of the two partition of the external HDwd
i have made TimeMachine on USB external disk, i migrate from here?
Can you tell me if befoure begin i use the new iMac intel
must create a new Admin name what must be different from the Admin name
and user what i must import ?
Thanks again
AleX

Similar Messages

  • Can't boot from external HD with Leopard on MacBook Pro or PowerBook

    I can't boot from an external HD with 10.5.5 Leopard on either my MacBook Pro or my PowerBook G4. I had a PowerBook G4 from which I could boot from either an external FW400 drive or an external FW800 drive. At some point, I stopped being able to boot from any HD, but I'm not sure if it was after upgrading to Leopard or not? Recently I just bought a MacBook Pro 15" and transferred all my files over from the PowerBook to the MacBook Pro during the install. However, even with the new computer, still cannot boot from an external drive. I have Leopard 10.5.5 running on both the external HD and the internal HD.
    Is this a common problem? Anybody know how to fix it?
    Thanks!

    That probably wasn't very clear was it? I have several ext. HD's, some with bootable systems and some just backups. One bootable disk was made with CopyCloner and the other was a clean format and only had an original install of the OS just to use for an emergency boot. They both booted just fine. Then at some point, they stopped being bootable. I have used the Control Panel "Startup" and also used the Option key boot and picked the bootable disk. Neither one boots anymore. It started doing this on the old PowerBook and then also refused to boot on the MacBook Pro. This is not the problem with the HD since it happens with any bootable HD. Something is going on at the system level and it was transfered from the PowerBook to the MacBook.
    Thanks,
    Bill

  • Fastest CD & DVD external burner with both an iMac Intel & G3?

    I have an iMac intel based computer with 10.5.7 and an iMac G3 computer with 10.4.11/9.2.2. What is the fastest burning drive I can get that will work with both computers? I'd love to buy 2 separate burners but that's too much money. I would prefer one with FireWire connectivity. What is the best available and where can I look for ones that are Mac compatible?

    Hi IcyCool7227
    For Mac compatible Desktop DVD Drives look at OWC and LaCie:
    http://eshop.macsales.com/shop/optical-drives/superdrives/
    http://www.lacie.com/products/
    Dennis

  • Migration from tiger to snow leopard problem on iMac

    I got
         Import Error
         The doc is encrypted and can't be opened
    error when opening a previous password protected spreadsheet with .xls file extenstion after migrating from tiger to snow leopard (10.6.3) on my iMac. Any help is appreciated. Maybe there is other thread talking about this already?

    This is an error message from Numbers trying to open password protect Excel files, which it cannot do. Assuming you have Excel, use Excel to open it.

  • Migrate from iMac G5 w/Leopard to iMac (Intel) w/Tiger

    I'm giving my daughter my 2007 iMac Intel.  It came with Tiger and the upgrade dvd to Leopard, and I have since upgraded it to Lion.
    Her iMac G5 (PPC) is running Leopard.
    I erased the 2007 iMac so she would have a clean install from the backup of her G5.  However, I don't know how I can upgrade the Intel back to at least Leopard so I can migrate her data and they would both have the same OS for the transfer.  Can you transfer data from Leopard down to Tiger?  It doesn't seem like that would be a good idea.
    Can I just make a dummy account to do the Leopard upgrade and delete it later?  Will that affect the migration of her stuff, home folder, user name?
    Thanks, Sandy

    Well, Lion is not on either machine at the moment, if that matters.  The G5 is Leopard and the Intel is Tiger (I've got the upgrade dvd for Leopard).
    The G5 has the floating FW symbol on the screen.
    They are connected with a FW 400/800 cable.  The cable works as I used it to do a back up to SuperDuper! last night.
    On the new Intel, it did not take me to the Time Machine option as that isn't part of Tiger 10.4.  That was my main concern, how could I could install the upgrade to Leopard DVD without making a user account.  I thought once I made a user account I would not be able to migrate correctly from the G5 or a Time Machine backup.
    It only got me about 4 steps in...pick the language, options to transfer from another computer (from another partition or do nothing), attach FW and restart in target mode, and then the screen where it tells you it's looking for the target drive it may take 30 seconds or more.  That's where the message came into play.
    I'm wondering if I just set the new Intel up with her same user name/home folder, upgrade with the dvd to Leopard and then somehow try to do an erase and install with the Time Machine backup or the SuperSuper backup.
    She's in high school and doesn't have a lot on the current machine, maybe 90 GB used.  I think I can easily move folders she's made for school papers and stuff.  We share iTunes on my mac, so hers is not sync'd to, so nothing lost there. The biggest thing would be bookmarks and the iPhoto library (approx 2K pics).

  • Can I use migration assistant from a mac with leopard to a mac with tiger?

    My old mac was upgraded to leopard, (don't ask me why), and I just got a new mac with tiger, although I ordered leopard up to date. Can I use migration assistant to move stuff from the old mac with leopard to the new mac with tiger, or do I have to wait until I get the copy of leopard? Plus, if I move files over now- like through email and/or network connection, and then when I get leopard and archive and install, what happens to my files?

    That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
    http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

  • Migrating from and synching with imac

    I am about to purchase the 13'' 2.53ghz macbook pro and will migrate from my iMac. What is the best way to ensure that new work (documents/files) on my macbook pro or my imac is synched with the other machine? Would I use my idisk? If so how? Thanks J

    Hi
    I too have an iMac and a MacBook which I like to keep synced (all documents the same on both machines).
    I would have to second what the first reply says. Use a USB drive or a networked drive.
    I have tried iDisk and quite frankly found it horribly slow and unreliable. If you don't turn on iDisK sync then you only have access to stuff if you have internet access, and if you do turn on iDisk sync it is very unreliable and slow at up loading new files , so I found I could never trust that a file would be there for me when I wanted it next. It is a nice idea, but for me anyway it does not work well enough yet.
    I use a USB stick and just plug it into which ever Mac i happen to be using. This has the advantage for me over a networked drive because I can use it anywhere, I don't have to be connected to my network.
    Of course mobile me will keep data like calendars and address book synced, and I have to say it does a good job there. It keeps this info synced for me across both Macs, an iPhone and iPod Touch. It is just the iDisk bit of things I find a bit clunky and slow.
    Hope this helps
    Paul

  • Migration from PPC 10.4.11 to iMac 10.6.2 OS 9 files

    I am about to use migration assistant to move my old PPC files and apps to a new 27" iMac running 10.6.2. I'd like to do everything, files and apps and settings and I plan on using a firewire cable and target mode.
    The old computer is 10 years old...still running great! But when it was new it ran OS 9 and there is a lot of that old stuff still on the computer (OS 9 system, various arcane apps like Conflict Catcher--remember that one?!). Do I need to try to clean those out before I migrate, or will 10.6.2 be smart enough to deal with this?
    Thanks!
    PS, what an amazing thing this 27 inch iMac is!!

    Most likely you do not want your old PPC-only applications. They should be updated to universal binary versions first, if possible, or find replacements that are universal binaries.
    With such a mixed up old system I would be quite careful about migrating anything other than your personal data, files, and folders. Quite a lot of old stuff just isn't compatible any longer and can raise havoc on a new and well functioning system. See the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • Migration from G4 Powerbook(partitioned) to new IMAC

    I am tried to use Migration today, from G4 Titanium DVI Powerbook(partitioned) #1 MacTiger 10.4.11- 14GB, #2 OSX 9.9GB, #3 OS9 4GB to my new IMAC that I have had for a couple of weeks. When I had to enter the name info, it kept on telling me that I had to change the names as they were already existing. Began migration and it ran for 3 hours or more then stopped with 2 hours 58 minutes remaining on the clock. I let it go for over another hour. Nothing happening. Tried to cancel but 3 new icons were on my IMAC desktop. Rainbow wheel goes round and round etc. on IMAC. I then held down the power button on the G4 to power off. The 3 new icons on my IMAC desktop, I dragged them to the trash. I'm all in a sweat just writing this down. Who would like to hold my hand as I walk through the valley of the shadow........
    Thanks for your reading, responding, succeeding. You guys always come through. Are PC people this fortunate?

    I'm not sure what you are asking. Yes you can change the name of a user account, but it's a bit complicated. It would be easier to simply transfer the files as I've outlined rather than trying to use Migration Assistant which will attempt to transfer everything in the user account, which is ill-advised. There are PPC components in your old system that you do not want moved to the new computer. PPC components can gum up the works on an Intel system.
    Migration Assistant is an excellent tool but it's not the right tool when you are migrating from a PPC Mac to an Intel one. See the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 3/12/2008

  • Migrate from G5 Dual 2.5 to 24in Intel iMac

    Hi all, could any of the Guru's here give me some advice. I am migrating my set up from a Power Mac G5 Dual 2.5 to an Intel iMac 24in 2.3. What's the best way of bringing my apps, fonts and settings across to the new machine?

    I would not use Migration Assistant because you are moving from a PPC to an Intel Mac. Read the following:
    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
    /Home/Library/Preferences/ copy any preferences needed for third-party applications
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to another forum user for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    I would consider simply reinstalling your third-party applications. All OS X applications are universal binary versions or Intel-only versions. They should not be replaced by your older PPC equivalents.

  • External Drive with Time Machine, booting from external drive with utilitie

    I'm using Time Machine now with
    a LaCie 1TB external hard drive.
    Everything works fine.
    But, I've been wondering:
    Can I place a program like TechTool
    on the external drive (that Time Machine uses)
    and boot from that external drive.
    I would like to be able to do that,
    because diagnostics and repair programs
    only works properly and fully when they run from
    external drives. Anything on the internal drive can be repaired
    and examine. Impossible to do if Techtool is on the same
    drive that's been examined.
    Any thoughts as to what I should do?
    Thanks
    iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?

    pitou wrote:
    P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
    (from the external drive) how does the computer know which backup to take ?!?
    Isn't there many versions of the OS on the Time Machine backup taken at different times?
    As V.K. says, you can't boot from TM backups.
    But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
    You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
    You might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the rest of the FAQ Tip.

  • Image or Migrate from external HD

    I need to setup over 30 macs in the next few weeks and i want the easiest way to do it.
    i have an external HD with "User" folder on it.... can Migration Assistance on boot up see this and migrate from HD? or do I have to do a full install of Leopard on that HD first?
    second, what about a disk image... what's the best method.
    i need to keep this image updated constantly and distribute to new units we get.
    all of the will have same user name, password and network settings.
    thank you

    A server is only needed if you want to do network installs.
    Migration Assistant is intended for moving user folders not entire system installs.
    Yes, you can simply clone a default system to an external drive and then clone that system to each of the computers. You can use SuperDuper, Carbon Copy Cloner, Disk Utility, or any other utility that can create bootable clones.
    As I suggested, however, you should visit Mike Bombich's site. Lots of useful information and tools for what you want to do.

  • Migration from powerbook 10.4.11 to imac 10.6.8

    Migrating from Powerbook G4 10.4.11 (cannot upgrade beyond this release). Migrating to a new iMac 10.6.8. Problem: both computers are on the same wireless network. Start Migration Assistant on iMac then on Powerbook. Select "From another Mac" on iMac and "To another Mac" on Powerbook. Powerbook sees iMac, offers passcode entry field. Enter Passcode from iMac into Powerbook Passcode field. iMac displays "processing information ...". Powerbook does same. After 10seconds Powerbook displays the Passcode entry field again. Enter the same Passcode from the iMac into the Powerbook Passcode entry field. Powerbook displays "searching for other computers ...". iMac displays "processing information ...". After a few minutes, iMac displays dropdown box stating "connection to other Mac failed" (or similar wording) while Powerbook continues "searching for other computers ..." and iMac Migration Assistant main dialog box continues "processing information ...".
    Any help solving this problem will be much appreciated.
    Steve

    Steve your first mistake is attempting to do this wirelessly. If you can get it to start expect the migration to take a week or more. The easiest way is to connect the two together via Firewire with a cable like this which you can find at your local computer store, Radio Shack or of course Amazon. This assumes the Powerbook has Firewire, if it doesn't then create a bootable clone on an external HD. You will use either SuperDuper or Carbon Copy Cloner to create the bootable clone. Then instead of using Migration Assistant use Setup Assistant which you ignored when you turned on the new iMac for the first time, this mean you will need to start over. Please read Setup Assistant tips for detailed instructions beginning at "Second Chance..."
    Finally when you are migrating I would strongly recommend not migrating your Applications because you are moving from a PPC based machine to Intel. You may have apps that don't run on Intel or simply need to be updated to do so. This is your opportunity to update Apps and get current.
    Migration Assistant and Setup Assistant are cousins, similar but different. First is SA is more reliable and second it does not create a second user account.

  • Yosemite won't Boot from External SSD with Firewire Connection

    Seeking help, I boot from external SSD drives from my 2010 iMac. I recently installed Yosemite on an External SSD with a firewire connection and all went well with the installation and first boot. After completing set up and restarting my iMac Yosemite will no longer boot from the firewire connection it will boot to the loading bar and then get the dreaded Goest Buster Emblem, if I swap out the SSD to USB connection it boots normally. I have 6 SSD Drives with Mavericks and Lion installed on that will boot from the Firewire Connection.  Any suggestions ?

    Additionally when testing while the SSD is connected to a USB Connection and booted if I attach any firewire device they are not recognized or connected to the operating system.

  • Migrating from an eMac to my new iMac

    Hello,
    I need to migrate all of my info from my eMac to my new iMac.
    How is this done between the computers? Do I use a USB cable?
    What steps do I need to take?
    Thanks

    Cat-5 is just a speed rating for the Ethernet cable (higher number means faster). If you look closely at the cable, the rating is usually printed along its length. Cat-5 will give you at least 100 mbps. Cat-5e or Cat-6 will allow gigabit (1000 mbps) speed. The recent Macs all have gigabit Ethernet ports. Your eMac probably has 100Base-T (100 mbps) Ethernet, which is sill pretty fast for networking.
    Can I use the ethernet cable from that connects my cable modem to my iMac?
    Yes. You can use any old cable, and it will work as long as the cable is not broken. The speed rating of the cable may limit the file transfer speed.
    If you use Ethernet, you are making the connection using +File Sharing+ over the network.
    If you wait and use that FireWire adapter, you can use +File Sharing+, but it would be better to start the eMac using FireWire Target Disk Mode (as mentioned earlier), and mount the eMac's hard drive directly to the iMac's desktop. The eMac's hard drive will appear to be an external FireWire drive.

Maybe you are looking for