Migration of Database oracle 10g from solaris to linux

Hi,
I need to migrate a DB from solaris to linux without shutdown the solaris DB.I would like to know the backup using RMAN Transportable tablespace in solaris and migrate it to dest(Linux).
Kindly share ur ideas

I need to migrate a DB from solaris to linux without shutdown the solaris DB.I would like to know the backup using RMAN Transportable tablespace in solaris and migrate it to dest(Linux).
Kindly share ur ideasIt is very much possible. In fact I transfered DB from sunos to Windows. But this is not a backup process using RMAN. RMAN is used to change the endianness of datafile so that it is in format which is required by Windows format. This transfer is possible using the data pump utility(IMPDP). There are many threads on the forum for this topic. Seek help from other threads.
Regards
Virendra

Similar Messages

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

I got error when I export database ORACLE 9i from solaris 9.

I want to export full database ORACLE 9i from SOLARIS 9 to import full database on ORACLE 9i on windows.
I set oracle environment and NSL_LANG with command:
bash-3.00$ export ORACLE_SID=TIS
bash-3.00$ export NLS_LANG=AMERICAN_AMERICA.TH8TISASCII
and then run command to export:
bash-3.00$ exp system/manager@TIS full=y file= /u03/dmp/TISfull.dmp log=/u03/dmp/exp_TIS.log
I got error message as:
Export: Release 9.2.0.1.0 - Production on Thu Oct 8 17:57:32 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in TH8TISASCII character set and UTF8 NCHAR character set
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_AW", line 42
ORA-06512: at "SYS.DBMS_AW", line 105
ORA-06512: at "SYS.DBMS_AW", line 221
ORA-06512: at "SYS.DBMS_AW_EXP", line 264
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_AW_EXP.schema_info_exp
. exporting cluster definitions
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00056: ORACLE error 25153 encountered
ORA-25153: Temporary Tablespace is Empty
ORA-06512: at "SYS.DBMS_LOB", line 424
ORA-06512: at "SYS.DBMS_METADATA", line 1140
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
How can I solve this problem?
Any suggestion?

#### HOW to solve it.
## To check the default temporary tablespace of the database:
SQL> select property_name, property_value from database_properties;
## check DEFAULT_TEMP_TABLESPACE, if it use wrong temporary tablespace, run:
SQL> alter database default temporary tablespace temp;
## check user with temporary tablespace, run command:
SQL> select username, temporary_tablespace, account_status from dba_users;
## change temporary tablespace:
SQL> create temporary tablespace temp1 tempfile '/data/u01/app/oracle/oradata/TIS/temp_b.dbf' size 100m;
SQL> alter database default temporary tablespace temp1;
SQL> drop tablespace temp including contents and datafiles;
SQL> create temporary tablespace temp tempfile '/data/u01/app/oracle/oradata/TIS/temp01.dbf' size 100m autoextend off extent management local uniform size 1m;
SQL> alter database default temporary tablespace temp;
SQL> drop tablespace temp1 including contents and datafiles;
Thanks

I want to uninstall Oracle 10g from Solaris 10

Hai All,
I want to uninstall Oracle 10g safely from Solaris 10 . I take runinstaller and execute. In the next screen installed products tab appear . I select the oracle products and compnents there but the Remove button not active . I tried many time.. But it is not possible....Please help..
Shiju

After your run 'runInstaller', on the first 'Welcome' Screen,
there's a "Deinstall Products" button on bottom right hand corner, click that and follow the screen.

How to connect Oracle 10g from OBIEE on Linux?

- OBIEE 10.1.3.4.0 is running on Cent 5 Linux M1 (*64* bit). My Oracle database is running another similar machine M2.
- I installed oracle 64 bit client on M1 but could not connect to run the report, connection issue. Even nqcmd didn't helped.
- I guess it was because OBIEE is *32* bit application and hence need 32 bit client.
- I tried installing Oracle 32 bit Linux client on M1 but installation fails with some dependency (Not sure if we can install 32 bit client on 64 bit machine)
Q1 - Any suggestion at this point?
Q2 - Is there any way we could connect OBIEE to Oracle via ODBC drivers. I could not found any odbc driver/so file when I wan installed 64 bit client. Any suggestion for this?
Thanks in Advance!

The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
    (DESCRIPTION =
       (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
       (CONNECT_DATA =
          (SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra

Reconfiguring Hyperion after DB move from Solaris to Linux

Our Hyperion Databases are moving from Solaris to Linux. We need to reconfigure Hyperion EPM to point to the new Linux DB. We have 4 Hyperion servers A,B, C, D.
Server A : Foundation Services, Workspace ,Reporting & Analysis, Planning, Calc Manager, Shared Services, EAS, APS.
Server B : EPMA, Essbase studio
Server C: ODI, FDM
Server D: Essbase
We are planning to do the below steps :
1) Stop all Hyperion services .
2) Stop databases on Solaris servers.
2) Configure Foundation first on foundation services server ( server A) , using EPM system configurator.
3) Configure Foundation on the other 3 servers( B, C,D) which are having EPMA, FDM, Essbase etc.
4) Foundation- Deployment to applicaiton server in foundation services server ( Server A).
5) Configure/deploy DB for rest of the products.
We tried to do similar steps last time. We were able to do foundation but for other products it failed. Please let us know if these steps are correct?
We are on Hyperion 11.1.2.2.300 version. O/S is Windows 2008 64 bit.

You should just need to follow the documentation:
Changing the Shared Services and Registry Database Connection Information and Password
Changing EPM System Product Repository Database Connection Information and Passwords
If there are problems following those steps then post the errors from the logs.
Cheers
John

Migrating Oracle EBS 11.5.10.2 from Solaris to Linux

Hi,
I want to migrate Oracle applications 11.5.10.2 from Solaris to Linux using transportable database feature.
Please suggest how to proceed with this.
Thanks,
Anirudh

Hi Anirudh,
Please see:
https://blogs.oracle.com/stevenChan/entry/have_you_used_10gr2_transportable_tablespaces_with
And see:
10g+: Transportable Tablespaces Across Different Platforms (Doc ID 243304.1)
Cross Platform Transportable Tablespaces on 11i with 10gR2 (Doc ID 454574.1)
Master Note for Transportable Tablespaces (TTS) -- Common Questions and Issues (Doc ID 1166564.1)
R11i / R12: Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
R11i / R12: Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
Transportable Tablespace (TTS) Restrictions and Limitations: Details, Reference, and Version Where Applicable (Doc ID 1454872.1)
Best Practices for Using Transportable Tablespaces (TTS) (Doc ID 1457876.1)
Thanks &
Best Regards,

Migrating Oracle from Solaris to Linux: Trouble converting FileSystem metadata with fscdsconv in Linux (Veritas Storage Foundation)

Hello everyone,
I'm in the process of migrating an Oracle DataBase from Solaris 5.10 server to Linux Red Hat 6.4, the storage used is SAN and volumes managed by Veritas Storage Foundation on Solaris
At this point, I'm trying to convert the byte order of some volumes that come from Solaris in my Linux server using the following command:
/opt/VRTS/bin/fscdsconv -y -e -f /tmp/vxConv/dbtemp01.tmp -t os_name=Linux,arch=x86 /dev/vx/rdsk/dgtemp/dbtemp01
Note: Because of the text formating, the above command could span several lines, but I'm executing it in just one
And I get the following errors:
UX:vxfs fscdsconv: ERROR: V-3-20012: not a valid vxfs file system
UX:vxfs fscdsconv: ERROR: V-3-24426: fscdsconv: Failed to migrate
Searching for a solution of these errors in the Veritas forums, I've found this post, where the user mikebounds gives some steps to migrate Solaris to Linux. I've found that I've replicated these steps but I get stuck on the fscdsconv because the beforementioned errors.
Does anyone know what could be happening here or have any sugestion to share?
Software Versions involved:
RHEL 6.4 x86_64
Veritas Storage Foundation Enterprise 6.2.0.100 on Linux
Solaris 5.10
Veritas 5.0 on Solaris
Disk layout v7
vxfs filesystem format
Oracle 10g
Thank you very much in advance for any help/ideas to solve this
Best regards
Raul

have you seen this - How to migrate a data store from Solaris to Linux? (Doc ID 1302794.1)
HTH,
Pradeep

Need to Clone A Database From Solaris to Linux Oracle 11g

Hi Team,
I am using Oracle Database Version 11.2.0.1.
We have 6 production servers and all of them are in solaris box. We have a new requirement from application to use Linux boxes and for that we need to perform a database refresh from Solaris to Linux box.
I can do it by Export and Import technique. But I want some other way to perform this database refresh activity.
1] Can I do it while taking a rman backup from solaris box( Source) and restore it back to Linux( Target)?
2] Can I do it using transportable tablespace method?
I am aware of performing this using export-import but as our database size is near of 1TB I can't apply this technique.
I need your suggestions in this activity, please put your opinion on the correct method I should opt for and along with that share me the supporting document where things are mentioned in step by step way.
Please let me know if this can achieved by RMAN...
Source Machine Make:-
bash-3.00$ uname -a
SunOS blrdlvdwhdb01 5.10 Generic_142909-17 sun4v sparc SUNW,Sun-Blade-T6320
Target System Make:-
Linux blrulvremoradb01 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Regards,
Arijit

Yes, you can create a backup with rman and restore in other platform, check:
How To Use RMAN CONVERT DATABASE on Source Host for Cross Platform Migration - 413586.1
Cross-Platform Migration on Destination Host Using Rman Convert Database - Note 414878.1
but easier and faster will be with expdp/impdp.

Migrating database from solaris to linux

I am not sure if there is a migration section here. However, I would like to migrate a 9.2.0.8 database from Solaris to linux and upgrade it to 11g. I reckon that both platforms have different endian format and using rman convert+transportable database and so on will be work if I can upgrade the database to 10 or 11g.
My question is that since the database is small around 35GB, can I use just exp/imp? If yes but can someone outline what will be needed to take care of the endian format and other hidden hints.
I believe someone must have done this ------> 9i to 10g or 9i to 11g across platform.
Thanks.

It just depends on what how you define 'large'. Generally speaking exp/imp is slow when compared to Data Pump or transportable tablespaces (but both cannot be used in your case).
I don't think that 16 GB is large but you have to test in your environment how much time import is going to take: import needs always more time than export.

Need Best Practice for Migrating from Solaris to Linux

Hi Team,
We are migrating our Data Center from Solaris to Linux and our EBS 11i, database 10g (10.2.0.5) is 6TB. Please let us know the Best Practice to Migrate our EBS 11.5.10.2 from Solaris to Linux RHEL 5.
we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5. Please let us know for any details.
EBS version: 11.5.10.2
DB version: 10.2.0.5
We have checked the certifications in Oracle support.
Oracle EBS 11.5.10.2 is not certified with Linux x86-64 RHEL 5.
Oracle EBS 11.5.10.2 is certified on Linux x86 RHEL 5.
So we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5.
Thank You.

You can transportable tablespace for the database tier node.
https://blogs.oracle.com/stevenChan/entry/10gr2_xtts_ebs11i
https://blogs.oracle.com/stevenChan/entry/call_for_xtts_eap_participants
For the application tier node, please see:
https://blogs.oracle.com/stevenChan/entry/migrate_ebs_apptiers_linux
https://blogs.oracle.com/stevenChan/entry/migrating_oracle_applications_to_new_platforms
Thanks,
Hussein

Migrate existing infracture from Solaries to linux plateform

Hi,
We want to migrate existing infracture from Solaries to linux plateform.
Please suggest me the way.
Our Current Infracture:-
Serve 1 (on Sun Sparc):-
indianDBA-1 (Contain:- Infrastructure database (Meta) 10.1.0.4.2 10G R1, Infrastructure middle tier 10G R2)
Server 2 (on Sun Sparc):-
indianDBA-2 (Contain:- Application Server middle tier 10G R2 10.1.2.0.2)
Server 3 (on Sun Sparc)
indianDBA-3 (Contain:- contains Discoverer report, EUL schema) 11G R2
Thanks
Anup

Hi,
You can use export/import or transportable tablespaces to migrate the database.
10gR2 Transportable Tablespaces Certified for EBS 11i
http://blogs.oracle.com/stevenChan/2010/04/10gr2_xtts_ebs11i.html
Migrating E-Business Suite Release 11i Databases Between Platforms
http://blogs.oracle.com/stevenChan/2008/08/migrating_ebusiness_suite_databases_between_platfo.html
Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i
How long the task would take? Depends on the hardware resources you have. The best practice is to try this on a test instance first.
The application should work as expected once the task is completed.
Thanks,
Hussein

LRM -00109:could not open parameter file Oracle 10g in Solaris 10

Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Thanks

4joey1 wrote:
Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
By default, oracle will look first for a spfile named "spfile<ORACLE_SID>.ora". Lacking that, it will try to find "init<ORACLE_SID>).ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Once you have started the db (I believe a startup nomount will be sufficient) you can issue CREATE SPFILE ... Details are in the fine SQL Reference manual found at tahiti.oracle.com
BTW, "open" is the default behavior of "startup", so no need to specify it. A simple "startup" does the same thing.
Thanks

Doubts intalling Oracle 10G in Solaris 10.

Hi Buddies;
I'm installing Oracle 10g, in Solaris 10, first I uncompressed this file 10gr2_db_sol.cpio. Now, when I execute runInstaller I got this message:
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10 Passed
Checking Temp space: must be greater than 250 MB. Actual 13289 MB Passed
Checking swap space: must be greater than 500 MB. Actual 13492 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Ch eck if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
What I supposed to do? Thanks for your help.
Al

Hi,
look at:
Re: Problem in adding database
maybe it helps. It that thread I showed how I usually manage X11 window. Another way is to do everything silent with scripts as shown here:
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-Solaris-10-sparc.php
That's my open source swiss army knife.
Cheers,
David
OCP 9i / 10g / 11g

Migration of Database oracle 10g from solaris to linux

Similar Messages

Maybe you are looking for