Migration of sql agent jobs in SQL 2014 AlwaysON
Hi All,
We are in process of implementing AG in SQL 2014. I am facing issues while checking jobs.
I have created the jobs on both nodes. However, I want the jobs to be executed only on primary.
For this, I started introducing a new step inside the sql agent job which will be my 1st step which checks whether it is Primary or not.
If not primary, I want the job to quit with Success else I want to proceed to next step as it is Primary.
But i wasn't able to adjust the Advanced option of 1st step where i am checking whether isPrimary or not. Can we adjust the advanced options of setting @on_success_step_id programmatically in 1st step itself... or Is there a better way to do this.
If anyone share that piece of logic would be a great help.
Thanks in Advance.
Hi jmcmullen,
This works fine. Thank you. But it is changing the behavior of the job.
Lets say for example I have node-a n node-b.
for eg: if the job is started at step1 on secondary(i.e. node-b) and we are checking if primary or not.if not primary , then we are the above action i..e
EXEC dbo.sp_update_jobstep
@job_name = N'Test',
@step_id = 1,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=1,
@on_fail_step_id=0;
GO
At this stage , step1 options are changed i.e OnSuccess of step1 -> it is changed to "quit with a success".
Doing so, there is a problem. at this now lets say failover happened, the job now started on node-B which is primary now, and now the options are wrongly set for step1 which is OnSuccess it has to "go to next step" but it is quiting
with success. In GUI it shows below warning
WARNING: The following job steps cannot be reached with the current job step flow logic:
Is this the intended behavior?
Does it makes sense ??
Similar Messages
-
DPM 2012 R2 CU4 protecting SQL 2014 AlwaysOn AG with Failover Cluster vs. DR location
Hello!
We have a problem protecting any Database of SQL 2014 AlwaysOn Availability Group with SQL Failover Cluster Instance when moved to DR location. Everything is protected using DPM 2012 R2 CU4 from Primary location.
FACTS
- all servers are Windows Server 2012 R2
- all servers are Virtual (except Hyper-V hosts obviously:)
- that means virtualization is based on Windows Server 2012 R2 Hyper-V
- all clusters (SQL, Exchange,...) are Guest Clusters on Hyper-V
- SQL 2014
- DPM 2012 R2 CU4
- Primary and DR location
SETUP
SQL
- Primary location: SQL 2014 Guest Cluster with SQL Failover Cluster Instance using Shared VHDX disks
- DR location: SQL 2014 Standalone using VHDX disks
- AlwaysOn Availability Group expands between the primary and DR location.
DPM
- Primary location: DPM 2012 R2 CU4
- DPM 2012 R2 CU4 Agents installed on every possible SQL 2014 Server.
SCENARIO
- DPM is backing up all the SQL Databases normally as long as they exist on any SQL Cluster Node on Primary location.
- As soon as any Database is moved to DR location, that Database is not backed up anymore with the following error.
DPM ERROR
Starting synchronization on SqlServerName\DatabaseName failed:
Error 104: An unexpected error occurred while the job was running.
Error details: The system cannot find the path specified (0x80070003)
Recommended action: Retry the operation.
TROUBLESHOOTING
- Tried to modify SQL Protection Group in DPM Server while Database was active on DR location
> error enumerating volumes or drives D:\, E:\, F:\ (I don't have exact error atm)
> this looks like DPM is not aware that DPM is active on DR location to me
- Checked Technet, blogs and forums; no useful information
QUESTION
Is this expected or by-design behavior? Is this a bug? I am aware there were quite some issues backing up AG's from DPM 2012 SP1 ans SQL 2012 on.
Does anybody have a lab of that kind to try it out?
Thank you!
Best Regards,
Damjan Grimšič
LpdOK. The issue has been resolved. Issue was related to possible Disks Owners in Failover Cluster Manager Console for SQL Cluster.
In Primary's site SQL Cluster Failover Manager Console / Storage / Disks.
SQL Server(s) from Secondary location need(s) to be unchecked as Possible owner(s) in Advanced Policies for all relevant Volumes.
Lpd -
Question on Quorum : Windows Server 2012 R2 + SQL 2014 AlwaysOn AG
OS on all nodes : Windows Server 2012 R2
SQL on all nodes : SQL Server 2014 CU2
2 cluster nodes in primary data center and AlwaysOn AG doing Sync Transfer between these nodes with auto failover.
2 cluster nodes in DR data center(Different subnet) and AlwaysON AG doing an Async Transfer between primary replica and these nodes with manual failover.
As this is a multi sub-net cluster we are giving DR nodes 0 vote. 2 nodes on primary DC has votes and a file share on the primary DC has a vote.
If the primary DC is gone,then should we re-assign node votes to the 2 nodes in DR site and again manually configure a file share witness and give it a vote?
Whats the best strategy here? Any recommendation is highly appreciated.
Thank you,Anup,
Think if we have network issues between Primary DC and DR DC. DR node might think…Hey, I’m the only one running now. I can take all the resources. We do not want nodes in the secondary site to contribute to a decision to take the cluster offline
when there is nothing wrong with the primary site. Do you mean to say Dynamic Quorum is smart enough to handle this situation?
Is it smart enough on it's own? No. That's why someone has to determine which site they want to stay up.
If you're using dynamic quorum, a new property was introduced called "LowerQuorumPriorityNodeID" which is set at the cluster level. Give it the node of one and only one of the secondary site servers. Set a fileshare witness (if possible) as the
odd vote and make sure both sites can see it equally well. Set this property on the cluster for a node on the secondary site.
http://technet.microsoft.com/en-us/library/dn265972.aspx#BKMK_TieBreak
Assume that the fileshare goes down and you have 2 nodes at the local site and 2 nodes at the DR site. Suddenly, communicates between the two are severed. If you have dynamic quorum set and the property I mentioned above, the secondary site will shut down
and the local site will stay up as the secondary site is set for a lower precedence.
Please note, the only reason I brought this up was because you're on Windows Server 2012R2 as this is when it was first introduced.
-Sean
Sean Gallardy | Blog | Microsoft Certified Master -
I've searched and read that SQL Data Tools is gone in SQL 2014. It seems as though it's been replaced, and is currently pulled, by a plugin for VS2013.
My question is this; is SQL Server 2014 not a complete product any longer? I don't have VS 2013, so what am I supposed to do? I need to develop/modify my SSIS packages and we're about to migrate to SQL 2014. I can't believe all the tools
I need no longer come with the install of SQL 2014 - this is extremely disappointing.
Thanks in advance
AndréHi Andremg,
To do SQL Server Business Intelligence development, you don’t need to install Visual Studio. The specif version of BIDS/SSDT just uses specific Visual Studio shell, and can be integrated into the corresponding Visual Studio. The BIDS/SSDT is a different
product and works independent of Visual Studio.
Since the relase of SQL Server 2014, the SQL Server Data Tools used for Business Intelligence development is not shipped with SQL Server installation. To get the SSDT-BI Tools, we need to download it from the Micrsoft Download Center manually.
Currently, there are two versions of SSDT-BI Tools avaiable for SQL Server 2014 BI development:
Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013
Microsoft SQL Server 2014 CTP2 Data Tools - Business Intelligence for Microsoft Visual Studio 2012
Actually, the SQL Server Data Tools - Business Intelligence (SSDT-BI) for Visual Studio 2013 is the native SSDT for SQL Server 2014 RTM. However, it is not available in the Download Center due to some compatiblity issues currently. So, we can temporarily
use the SQL Server 2014 CTP2 Data Tools - Business Intelligence for Microsoft Visual Studio 2012 for SQL Server 2014 BI development. Once the SSDT-BI for Visual Studio 2013 is back, we can install it and use it instead.
Besides, please understand that BI projects created in SQL Server 2014 CTP2 SSDT-BI for Visual Studio 2012 can be opened and eidted in SSDT-BI for Visual Studio 2013 without any problems. So, we don't need to worry about the continuity of the BI development.
In addition, as Kieran said, SSDT-BI Tools is a client tool and seldom installed on a production server.
Regards,
Mike Yin
TechNet Community Support -
Does SCCM 2007 R3 support SQL 2014 if not is there any mitigation plan for this
Hi ,
As part of Database migration to SQL 2014, wanted to check whether SCCM 2007 R3 support SQL 2014 or not.
I have a link for SCCM 2012 which tells it does support to SCCM 2012, but in upgrade mode.
Is there any other approch instead of upgrade on SCCM 2012.
Please let us know.
http://windowsitpro.com/configuration-manager/configmgr-2012-supported-sql-server-2014-only-if-you-upgrade
Regards
Sudam Bisi
CTSI doubt CM07 will support SQL 2014, particularly when mainstream support has ended already.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SQL 2014 FCI+AG on Clustered Shared Volumes design
Hello,
I was assigned the task to design a new SQL 2014 environment for my company. Our current environment consists of two clusters of 4 nodes each (8 nodes total for the two clusters) in two datacenters (let's say LA & NY).
Each datacenter is both primary & DR for different applications. Each cluster is active/active and has 9 SQL instances - 1 DEV/2 UAT/4 PROD/2 DR.
We are using Windows Server 2008 R2 SP1 + SQL 2008 R2 SP2 FCIs for HA + DBM for DR, storage is symmetric, LUNs are coming from NetApp SAN filers.
Due to the consolidated nature of the current SQL clusters (some hold 100+ DBs for different applications), the new platform - Windows 2012 R2 and that one WSFC cluster will be used, I decided to go with a new build instead of upgrade.
My plan for the migration to SQL 2014 is as follows:
1. Evict two nodes from each cluster, the 9 SQLs in each datacenter will run on two nodes and I will have two nodes more per site to build the new environment.
Average CPU utilization for each node is 10-20%, total max memory of all SQL Servers per site is 256GB RAM, each node has 2 CPUs x 8 cores each with 256GB RAM. SQLs will still run on two nodes with reasonable performance.
Since the same number of cores is used and we pay SA, there will be no increase in licensing costs for the time of migration to SQL 2014 and to obsolete the SQL 2008 R2 environment.
2. The new cluster will consists of 4 nodes with Windows 2012 R2 (2 in NY and 2 in LA) and will have Node+FileShare majority quorum model with Cluster Managed voting enabled.
3. New SQL 2014 FCIs will be built (9 per site) and will use Clustered Shared Volumes + AlwaysON Availability Groups. Once the new environment is built, databases will be migrated by backup/restore.
Since we will have AlwaysON FCIs+AlwaysON AGs I'm aware that automatic failover cannot be used and the complications with addition of data files on primary databases, that's fine (file paths will be different of primary and DR SQL instances).
My question is - is this a supported configuration from Microsoft - AlwaysON AGs running on CSVs in a multi-site cluster?
I am aware that CSVs are something new for the SQL world, so what are the things I should take into consideration when building this solution? Are there any pitfalls to be wary of?
Any suggestions will be much appreciated.
Thank you in advance,First, consider building a separate Hyper-V cluster in each data center, and running SQL Server in VMs.
In your proposed configuration if you loose connectivity between your data centers, half of your nodes will loose quorum and go offline. It's simpler to maintain quorum seperately in each data center when trying to run active-active.
Hyper-V adds a bunch of useful stuff, like live migration, storage migration, and basic HA and DR without guest clustering. And the implementation of Hyper-V on CSV is a very common pattern.
You can then present shared hard disks to your SQL VMs to create a FCI on a guest cluster. See
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
Or you can simply use stand-alone instances on the guests, and use AlwaysOn AGs for rolling upgrades and DR.
That said, you proposed configuration is supported. It's a variant of the solution outlined here
AlwaysOn Architecture Guide: Building a High Availability and Disaster Recovery Solution by Using Failover Cluster Instances and Availability Groups
The cluster would have asymmetric storage, with the nodes in each data center sharing LUNs (whether on CSVs or not), but the LUNs in a data center would not be visible to the nodes in the other datacenter. You can and should use the same path names
on the primary and DR instances, as outlined in the whitepaper. This is important because otherwise file and filegroup operations will suspend the AlwaysOn data movement.
David
David http://blogs.msdn.com/b/dbrowne/ -
SQL server agent jobs throws random errors while the ETL process works fine.
Hi,
I have this problem with SQL agent jobs.
We went from sql2008 to sql2012 and migrated SSIS without problems. The ETL process runs fine and the OLAP cubes are processed.
I have a job which calls the master execution dtsx for a particulair customer. When the ETL load and OLAP is processed it should go to the next customer. The problem i have is that the agent logs some errors for random customers. I tried to do only two clients
in one job this works then i add the third client and then it fails (log wise) for a customer which did run successfully before when there were only two customers.
Despite the error message the ETL did run, there were no duplicate keys and OLAP was processed???
Im very close to pull all my hair, because some combinations like two customers work, and placing these two customers with a third one it then fails again. (again cubes are processed and data is integer yet i keep getting these annoying errors in the log)
Perhaps someone could help me further.
-Miracles are easy, the impossible takes a bit longer-Just double-click on the Agent job, then click on Steps property page (on your left), you must be able to see a list of steps with the action "On Failure" which you should examine.
Arthur My Blog -
Excel Import Fails in SQL Server Agent Job but not when executed in BIDS
We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error. I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009 Source: xxxxxx Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C Source: Load File to Staging Excel Source [43] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017 Source: Load File to Staging SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C Source: Load File to Staging SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02 Code: 0xC0024107
Source: Load File to Staging Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent -
SSIS package not able to connect to XLSX file under SQL Agent Job
I have a very simply package using an Excel connection to an XLSX file. It's a straight read of the file and import onto a table.
The package works fine in Visual Studio 2008 development and also runs fine when executing on the (server I copied it to) under Integration Services.
However, under a SQL Agent, the package (32-bit is checked) can not acquire the connection to an excel file. I use UNC pathing to the file. I've read other posts about similar problems and tried various scheduling options (including Owner of
job).
I even tried a to trigger it with a command-line which did not work:
"C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\DTEXEC.exe" /sq "\our packages\My_XLSX_File_Import" /SERVER myserver /X86 /CHECKPOINTING OFF /REPORTING E
All errors are: "DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209302."
I can certainly post more, if someone can help. Sorry, but I am not getting the right help form those posts.
Please, are there any hints at how I can get the Agent job to work?All errors are: "DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209302."
I can certainly post more, if someone can help. Sorry, but I am not getting the right help form those posts.
Please, are there any hints at how I can get the Agent job to work?
Ensure that below correct drivers are installed on your target server because I see that file is
.xlsx
Microsoft Access Database Engine 2010 Redistributable
Please refer:
http://microsoft-ssis.blogspot.co.in/2014/02/connecting-to-excel-xlsx-in-ssis.html
Cheers,
Vaibhav Chaudhari
MCP, MCTS, MCSA (SQL Server 2012) -
SQL Agent Job Fails To Run A SSIS Package
Hi,
I have a SSIS Package which basically truncates the table and re-loads it from an excel file .The job runs fine if i run it manually on visual studio.However, i try to shcedule a SQL Agent job and it fails with the following error
Description: The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft
OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2014-10-22 14:47:41.15 Code: 0xC001002B Source: Package1 Connection manager "Excel
Connection Manager 1" Description: The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I am exactly not sure what it means?
Can someone please help me with any suggestions on this.
Thanks.Thanks for trying that option . It looks like there is an issue with the driver . Can you try to install/uninstall the driver once again from http://www.microsoft.com/en-us/download/details.aspx?id=13255.
You can try this URL , where he has the similar problem
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8a40d329-0611-44e2-ae51-3bd9b0901754/ssis-the-requested-ole-db-provider-microsoftaceoledb120-is-not-registered?forum=sqlintegrationservices
Please mark this as answer if this helps to solve your problem -
Sql server agent job with SSIS
Hello Experts
i have a sql server agent job that has four steps in tsql,ssis,tsql and tsql orders. the job run automatically every night and i copy paste the error message right here, any ideas please:
Date
1/27/2014 7:30:00 AM
Log
Job History (test [Mon-Fri AM])
Step ID
1
Server
server1
Job Name
name [Mon-Fri AM]
Step Name
step one
Duration
00:34:33
Sql Severity
0
Sql Message ID
0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
Executed as user x\serveragent. The step was cancelled (stopped) as the result of a stop job request.you can try default trace / event viewer to check if there is any entry on same .
How to read default trace in sql server
Thanks Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/
Please click the Mark as answer button and vote as helpful
if this reply solves your problem -
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I want to learn how to create a SQL Server Agent Job. After I googled it, I see that it can be found under Databases under Object Explorer, But I don't see that option. Can someone tell me where is it or how can i create one? I also need to
understand the steps to create one. (I just have basic knowledge of SQL Server of using small queries like Update, Delete, Select statements, etc). A plain english explanation would be very helpful.BOL: "Create a Job
This topic describes how to create a SQL Server Agent job in SQL Server 2014 by using SQL Server Management Studio, Transact-SQL, or SQL Server Management Objects (SMO)."
https://msdn.microsoft.com/en-us/library/ms190268.aspx
See SSMS image for new job:
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Sql Server Agent: job hasn't run once today. Scheduling problem?
I created this job yesterday at about 4PM; the view history shows that it last ran successfully at 11:53PM. These are the settings I put:
Schedule Type: Recurring
Occurs: Daily
Recurs every: 1 days(s)
Occurs every: 5 minute(s)
Starting at: 05:00:00 PM
Ending at: 11:59:59 PM
Start Date: 10/30/2014
No End Day (selected)
The job is enabled, but it hasn't run once yet today. I don't want to start it manually because it should've started already. It is currently not running.
What can the problem be?
Thanks.
VMThe output is:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64)
The length varies, but it's usually a bit over an hour to finish. It's set at 5 minutes so that, as soon as it completes, it runs the job again. The job history yesterday was: 5:48P, 7:03P, 7:43P, 8:58P, 9:53P, 10:58P, 11:53P. The job downloads some files,
and that's why the job varies in length.
VM
I would say there is no point in scheduling a job which runs for 1 hr to run at every 5 mins although as per SQL Server agent logic if job is currently running and it misses schedule it will only start when job is finished. I would say to change logic to
run every 1 hr.
Plus I cannot find the support article but I know there was bug where Agent job could miss schedule can you please apply
SQL Server 2008 R2 SP3. There are 2 reason
1. it might fix your schedule skipping issue
2 You would come under purview of extended support. Which I guess is very important.
You can easily open job activity monitor and look for column Next run date
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
In my SQL server stored procedure I need to check if a sql agent job is running or not. If Not running then start it immediately, and if it's already running then do nothing.
Could you send me some neat and trustworthy script to achieve this? Thanks.
FYI - I use SQL Server 2014
Thanks & Regards, <br/> <b>Please do "Mark As Answer" if this helps you.</b>Try this:
DECLARE @JOB_NAME SYSNAME = N'Daily update of indexes & statistics';
IF NOT EXISTS(
select 1
from msdb.dbo.sysjobs_view job
inner join msdb.dbo.sysjobactivity activity on job.job_id = activity.job_id
where
activity.run_Requested_date is not null
and activity.stop_execution_date is null
and job.name = @JOB_NAME
BEGIN
PRINT 'Starting job ''' + @JOB_NAME + '''';
EXEC msdb.dbo.sp_start_job @JOB_NAME;
END
ELSE
BEGIN
PRINT 'Job ''' + @JOB_NAME + ''' is already started ';
END
Source:
http://gallery.technet.microsoft.com/scriptcenter/Check-if-a-SQL-Server-75b889b4
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful".
Maybe you are looking for
-
How do I make and distribute and image to multiple macbooks?
Hello, I am the IT support person for a number of schools. We use a mixture of Macs and PCs. I am looking for a nice tidy option to create an image of a "master" client and distribute to a group of student Macbooks. All the Macbooks are the same mo
-
Rollback the data in DB Adapter
Hi, I have 2 db adapters, if i got error in 1 db adapter then how to rollback? Thanks in adv, Kpr
-
How to create a custom theme for discussions similar to jive?
I have worked in Jive earlier and saw that there was greater flexibility in the way you can work with themes. Oracle has extended it and looks most of the features are removed. In Jive, I was able to create a new theme and was able to change the look
-
Live Bookmark of a vBulletin forum is not updated automatically
I've subscribed to http://www.grimdawn.com/forums/external.php?type=RSS2, but I need to reload this Live Bookmark manually although I applied the 'Changing the automatic reload rate of Live Bookmarks' fix as described on http://support.mozilla.com/en
-
Having difficulties with my Magic Cordless Mouse
I got home from a long trip last night and updated my software on my new i7 iMac. Then, I needed to change the batteries on my cordless mouse. Ever since, the mouse is recognized (I can move the cursor around the screen), but when I left click, not