MII 11.5 and PCo 2.1 and Tag Query Error

Hi,
I have KEPWare OPC server configured with a single tag, and with the OPC Client open. I have PCo 2.1 configured with a single agent, and 'legacy' ticked with port 9001. I have a UDS connector pointing to port 9001, and a tag query in 'currentwrite' mode, and can successfully write a value from the query editor (within MII 11.5) to KEPWare, when tested directly within the MII query editor.
However, when I call the same tag query from within an MII transaction, and set 'TagName.1' and 'TagValue.1' to the values I want, I get the following error:
"An item with the same key has already been added. at SAP.Manufacturing.Connectivity.Protocol.Custom.PCoQueryRequestHandler.ProcessRequest(Object handler)"
I see this error in the PCo log.
Interesting thing is, that within the transaction editor, when I select the underlying tag query, and the editor asks to generate the XML, and I say Yes, the underlying tag query runs fine (I can see the value getting updated within KEPWare).
I've also tried with/without subscription items in PCo, plus different settings for 'Cache Mode' in PCo, plus using fully qualified tag name (ie: channel.device.tag as KEPWare sees it), etc, but in all cases I get the above error.
Any ideas?

Hi Diana,
I upgraded to PCo V2.1.4.2, still same issue. And yes, the data server (UDC) is checked as "Writable"!!
As mentioned, the tag query runs fine in both "Current" mode and "CurrentWrite" mode. Only when I call the same query from a transaction do I see this error. Excerpt from Runner Log below;
2011-02-23 15:20:32,390 [ServletExec: request: time=1298434832343, uri=/Lighthammer/Runner]
ERROR Runner - [9FA68944-67CE-824D-3FA6-D96023119ECE][ERROR]:
IlluminatorQuery: An item with the same key has already been added. TMP0794C967-0F69-8F04-568C-CD037815D1D0
2011-02-23 15:20:32,453 [ServletExec: request: time=1298434832343, uri=/Lighthammer/Runner]
ERROR Runner - [9FA68944-67CE-824D-3FA6-D96023119ECE][ERROR]:
ACTION FAILED: End Action IllumTagQuery_0 : () TMP0794C967-0F69-8F04-568C-CD037815D1D0
If I leave the transaction Tag Query action (that calls the underlying tag query) without any assignment to TagValue.1, then there is no error, and the error as set in the aunderlying tag query is used. But as soon as I assign values to TagValue.1 inside the transaction, I get the error. I've tried passing a value via a local paramater etc, same issue.
Regards
Kevin.

Similar Messages

Tomcat 6.0.9 and jsf 1.2 and jstl 1.2 using *.tag file error

I using :tomcat 6.0.9 and jsf 1.2 and jstl 1.2
My web.xml is at version 2.5 and I am using a custom tag (with the .tag extension). I am trying to use the http://java.sun.com/jsf/html library and values from my attribute. I'm new to this so I figure I must just me missing something.
I am run http://192.168.1.1/test.jsf laster,view:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:85)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:415)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:308)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.loadTagFile(JspServletWrapper.java:212)
     org.apache.jasper.compiler.TagFileProcessor.loadTagFile(TagFileProcessor.java:576)
     org.apache.jasper.compiler.TagFileProcessor.access$000(TagFileProcessor.java:50)
     org.apache.jasper.compiler.TagFileProcessor$TagFileLoaderVisitor.visit(TagFileProcessor.java:627)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.TagFileProcessor$TagFileLoaderVisitor.visit(TagFileProcessor.java:631)
     org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.TagFileProcessor.loadTagFiles(TagFileProcessor.java:645)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:190)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:308)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:414)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:455)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:139)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:108)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:266)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:159)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.9 logs.
if go to /WEB-INF/tags/test.tag ,delete line: <h:outputText id="test" value="hello!" />
run http://192.168.1.1/test.jsf is OK!(no error),So I guess error for "<h:outputText id="test" value="hello!" />" line ,why in test.tag file do can't use the "http://java.sun.com/jsf/html " library,please help me.......
Here is file WEB-INF/web.xml content:
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
version="2.5">
<display-name>Welcome to Tomcat</display-name>
<description>
Welcome to Tomcat
</description>

<servlet>
     <servlet-name>Faces Servlet</servlet-name>
     <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
     <load-on-startup> 1 </load-on-startup>
</servlet>

<servlet-mapping>
     <servlet-name>Faces Servlet</servlet-name>
     <url-pattern>*.jsf</url-pattern>
</servlet-mapping>
</web-app>
Here is file /test.jsp code:
<%@ page contentType="text/html;charset=UTF-8" %>
<%@ taglib prefix="tags" tagdir="/WEB-INF/tags" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<f:view>
<html>
<head>
<title>test</title>
</head>
<body>

<h:outputText id="myinfo" value="test success" />
<tags:test/>

</body>
</html>
</f:view>
Here is file /WEB-INF/tags/test.tag code:
<%@tag pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<h:outputText id="test" value="hello!" />
Thanks for any help.

Don't know if it's important, but there is no schema avaiable at: http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd
I found the right one at: http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd
/perty
Message was edited by:
perajonsson

Upload data from excel file to mii without UDS and PCo

Hi Experts,
I am trying to upload data from excel file to mii db without using UDS and PCo. Is there any other ways that we can achieve it.
I am thinking one solution , writing stored procedure. any other solutions?
Thanks in advance,
Eswar.

Hi,
Thanks for reply.
I tried to create OLEDB data server which will point to my excel file in D drive.Its created successfully and i tried to query the datasource using sql query, I am not getting any modes in sql query template.
can u provide some steps..how to access this file.
Thanks, Eswar

MII 12.1 and PCo 2.1.5.1

Hi guys,
Hopefully this will be easy points for someone. I am trying, for the first time, to connect our MII 12.1 to a newly install PCo 2.1.5.1.
I also have a Phoenix Contact OPC DA server installed on the PCo server and (I think) I have PCo configured to see the Phoenix server.
All I am trying to do now is configure MII to be able to do a TAG query through PCo. I tried creating a UDC Data Server (no PCo option was available). I used the PCo server's IP address and, at this point, I have tried a variety of ports (not sure how to tell which is correct).
Can someone please point me in the right direction or point me toward some documentation that might be helpful?
Note that we have successfully been using MII 11.5 talking to UDS and a Phoenix OPC server. We are trying to get the same kind of thing working with MII 12.1 and PCo.
Thank you!
-Mike

Using the same 11.5 UDC data server configuration in your 12.1 system should also work (12.1 tag query pointing to the already running UDS).
Swapping the data server port and IP address (or just port if they are on the same server) should allow you to toggle your 12.1 application tests between the UDS serviing up the OPC data as compared to PCO.

Problem with PCo 2.1 and ODBC data provider

I am trying to connect MII 12.0 to an Aspen IP.21 data historian using PCo as the universal data server. Configuration steps so far:
1) On the machine where PCo is installed, I have created an ODBC data source using Aspen's ODBC driver for SQL+.
2) In the PCo management console I have configured a source system using the Microsoft OLEDB Provider for ODBC Drivers, and selected the ODBC connection that I created. I click "Test Connection" and get a successful result.
3) In the PCo management console I have configured a destination system that points to an MII server. I put in the appropriate server/port/version/credentials, and click "Test Connection", and get a successful result.
4) In the PCo management console I have configured an agent instance connecting the source from step 2 and the destination from step 3.
When I start the agent instance, I get the red box with a white X in it indicating that the connection was not successful. When I go to the error logs I see:
Error . 6 6076 RS1630IP21T01 Host failed to create ConnectivityAgentProxy General PCo Fault: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc)
So, I installed the .NET data provider for ODBC to try to use that instead of the OLEDB provider for ODBC. However, when I try to reconfigure the source system, I do not see the .NET provider as one of my options. This is after a reboot, and starting/stopping all of the different PCo services.
Any thoughts experts??

Install PCo 2.2 on a server that has network access to your IP.21 server, and that your destination server (and SAP MII server in my case) has access to.
In the PCo2.2 Management Console:
In the "Source Systems" section:
Create a source system of type "IP21 Agent"
On the Server Settings tab, provide the server name of your IP.21 server
In the "Agent Instances" section
Create an agent instance, picking the source system you just created
In the Query Ports tab, under port type, select the type of system you will be communicating to. In my case, this is SAP MII, but you may be using something different.
Also under the query ports tab, you can enter enter a port number if you like. I just accept the default, which is 9000.
If you are going to "pull" data from the IP.21 server, this is all you need. If you want to "push" data to a destination system from your PCo server, you will need to set it up under the Destination Systems section. In my case, I am doing a data pull, so I haven't done much with destination systems.
Not sure what your destination system is, but in my case it is MII. For MII here are the basic steps:
Create a new UDC data server in the MII menu under Data Services -> Data Servers.
Set the IP address of the data server to the IP address of your PCo server.
Set the port number of the data server to the port number you set up in the agent instance.
Make sure the agent instance is started on your PCo server.
Create a new business logic transaction containing a Tag query, and configure the tag query to use the new MII data server you just created to query the tag(s) you are interested in.

PCo 2.1 and Proficy iFix using OPC DA

I'm finding some interesting behavior when trying to access Proficy iFIX HMI / SCADA with PCo 2.1 using OPC DA.
PCo Version 2.1.0.55
iFIX version 5.1
SCADA OS: Windows XP Pro, SP3
MII Version 12.1.5 Build(99)
What happens is that when I do a tag list in a tag query, instead of getting the tags, I get the propertes of the tags in the tag list, so what I think PCo's OPC client is doing is resolving to the lowest level of the tag list, which of course would be a tags individual properties. iFIX UDS does not exhibit this behavior.
I've tried a variey of settings in PCo, including "Force Flat Namespace" to no avail. Is there an option to set how far down the tag list drills?
Here is my setup, I know most of these settings have nothing to do with my problem but here they are for completness:
Source System Type: OPC DA
OPC Server Name: OPC Data Access 2.0 for ifix
Specification: DA 2.05A
Acquistion Mode: Synchronous
Read Source: PCoCache
Force Flat Namespace: False
Synchronous Read Source: Device
Acceptable Data Quality: Good
Activate Items: Both
Agent:
No Subcription Items
Communication: MII
Tag Query Cache Mode: Cache:

What happens if you try to add some Tags using the Subscription tab on the Agent Instance? Do you get the same behavior in the OPC Browser in PCo?
- Steve

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

PC and Windows 8.1 used mark illustrator error: 16

I have a PC and Windows 8.1 used mark illustrator error: 16 Perform reinstallation of the program and the error continues .

Karen,
Did youreinstall using the full three step way?
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music back into my laptop , how can I do that. Pl help

The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music etc back into my laptop , how can I do that. Also let me know how I can transfer the contacts into Windows contacts from I phone. Pl help

Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync.

Grouped and non-grouped SELECT in one query: help!

look first at: Wrong result when I use CASE on this forum. Here I wanted to get the user who created and the user who solved a problem (Lets call it Validation Error from now on (VE)).
The thing is: I already have a query who returns me lots of information about a VE.
The query in the previous thread returned me additional info about that VE (that is the creating_user and the solving_user). The 1st query is no group select, but the second is! Still, I need to combine those two in one query.
1st query:
select ve.seq,
     max((case vah.action when 'C' then vah.ur_code else null end)) created,
     max((case vah.action when 'S' then vah.ur_code else null end)) solved
from validation_errors ve
left outer join ver_action_histories vah
on (ve.seq = vah.ver_seq AND ve.log_date = vah.ver_log_date)
where ve.seq = 12860687
group by ve.seq;Result:
seq       | created | solved
12860687    Bob       Bobdont mind the "where"-clause, it is just to make the query go faster
what I do is: I join the VE with the ver_action_histories table which contains the users and what action they performed on a VE.
Now I just want to add that information to the results of an other query which also returns lots of information about a VE.
2nd query:
select ve.seq "VE seq", mh.seq "Counter seq",
          ve.log_date, ve.solve_date, ve.solved Status, ve.failure_code, ve.mde_code,
          mh.meter_type,
          iv.mr_type, iv.mr_reason,
          ih.mmr_seq
from validation_errors ve
inner join meter_histories mh
on (ve.mhy_seq = mh.seq)
left outer join index_values iv
on (ve.mhy_seq = iv.mhy_seq AND ve.log_date =iv.timestamp)
left outer join index_histories ih
on (ve.mhy_seq = ih.ive_mhy_seq)
where ve.seq = 8653936
and sysdate >= mh.start_date
and sysdate < mh.end_date;dont mind the "where" and "and"-clauses ... I hope the result of this query will simplify things ...
Result:
seq        |   counter seq | log_date | solved_date | status    | failure_code | ...
12860687       4568          1-jan-06   2-jan-06      Solved      ABCNow the actual question: Is it possible to combine those queries in one query? I just want the results of the first query (creating_user and solving_user) to be added as columns to the second result. Performance is very important. Please tell me that its possible?
Wanted Result:
seq        |   counter seq | log_date | solved_date | status    | failure_code | created | solved | ...
12860687       4568          1-jan-06   2-jan-06      Solved      ABC            Bob        BobIf anything I explained is unclear, please tell so I can try to explain it in an easier way.

Try an in line view:
select *
from
( <your first query goes here > ) a
, ( <your second query goes here > ) b
where a.seq = b.seq

MII 11.5 and PCo 2.1 and Tag Query Error

Similar Messages

Maybe you are looking for