Miles or km in Maps

Since the 2.2 update maps now shows the distance in Kilometers and not Miles is there a way to change it back to Miles?
Thanks

Apple clearly think that because we in Great Britain are near Europe we use exclusively European units and this is not the case. It is illegal in Great Britain to express distances in kilometres on public signs which are required by statute to be in Imperial units, viz, yards and miles. We all think and talk in Miles. This is an error founded on ignorance which should be corrected by the simple expedient of giving an option of expressing distances in Miles or kilometres. Can we check these things another time?

Similar Messages

The location of my hometown (Hysham, Montana) is off by over 50 miles ever since Apple Maps came out. I have been reporting off and on ever since but it has never corrected. What do I need to do to get this fixed?!

The location of Hysham in Apple Maps is off by over 50 miles and has been ever since the advent of the app. I have gone through the motions many times to place the pin the correct location. Unfortunately, no one at Apple seems to care if Hysham, Montana is plotted in the correct location or not. The location displayed in Apple Maps is quite literally in the middle of nowhere. If someone were to rely on Apple Maps to get to Hysham may very well end up marooned in the midst of muddy two track road in the summer or stuck in a snowdrift in the winter with little or no hope of expedient assistance. Other than the reporting feature in Maps, there appears to be no other means to report mistakes and there appears to be no expedient means at Apple to filter through reports and fix the errors. In sum, What do I have to do to get the location of Hysham fixed in Apple Maps? Much thanks!

You have done all that you can. Apple maps depends on 3rd party map data solutions. As problems are reported, they are reported to the data providers. How and when they decide to make changes is up to them.
You can also let Apple know you are disappointed in this via feedback at www.apple.com/feedback and click on the appropriate link.

Miles to kilometers in Map

Hello,
how I can switch miles to kilometers in rout calculation?

System Preferences:
thunderzzz's suggestion is better, as it is not global.

PDF Optimizer Causes Disappearing Lines in Maps

I often have to optimize PDF maps created in ESRI ArcGIS to reduce the file size. This works great most of the time but some PDFs have lines that disappear every time I optimize, regardless of the settings.
Some notes:
- The same line will disappear even when all of the optimize options are turned off (i.e. it should be doing nothing to the document).
- The layer that contains the line still shows up in the layer tab, but turning it on or off has no effect
- Printing to PDF works fine, the line does NOT disappear (though the file size reduction isn't as great)
- The line that usually disappears is ~425 miles long, though the map only covers a few miles of it
- This happens on multiple computers, running the latest version of Acrobat Pro 9 on Windows XP.
- This also happens on the same map regardless of which computer exports the map to PDF in the first place (even using different versions of PDF)
- I can replicate the effect by manually deleting the tags from the document. As soon as I delete the tag, the line disappears (though the layer remains)
This has been a very frustrating problem and I would greatly appreciate any suggestions. I have scoured the internet for similar problems, but could not find anything useful.
Before Optimize:
After Optimize:
Thanks,
Justin

I don't have a solution. but do have a little more info.
The original file includes the following in the page Contents:
0 0 0 RG 1 1 1 rg /OC /OC0 BDC /OC /OC1 BDC q 0 0 m 0 792 l 612 792 l 612 0 l 0 0 l h W* n q 573.8537 0 0 -473.77355 19.92048 774.71951 cm /Image_3 Do Q q 573.8537 0 0 -232.56665 19.92048 301.66598 cm /Image_5 Do Q Q EMC /OC /OC2 BDC q 593.05416 70.29936 m 19.92048 70.29936 l 19.92048 774.71951 l 593.05416 774.71951 l 593.05416 70.29936 l h W* n 1 0 0 RG 1.44003 w 1 j 1 J 10 M -35395.08504 45774.32631 m -35395.08504 45769.04616 l -35373.72453 45745.28548 l -35329.32347 45688.40386 l -35246.5215 45582.80084 l -35118.83845 45419.35616 l -35116.9184 45417.67611 l -35105.15812 45410.2359 l -35090.99778 45401.59565 l -35089.0777
Whereas the optimized file includes:
/OC /MC0 BDC /OC /MC1 BDC q 0 0 m 0 792 l 612 792 l 612 0 l 0 0 l h W* n q 573.8536987 0 0 -473.7735443 19.9204865 774.7195129 cm /Im0 Do Q q 573.8536987 0 0 -232.5666504 19.9204865 301.6659851 cm /Im1 Do Q EMC Q /OC /MC2 BDC q 593.054 70.299 m 19.92 70.299 l 19.92 774.72 l 593.054 774.72 l 593.054 70.299 l h W* n 1 0 0 RG 1.44 w 1 j 1 J q 1 0 0 1 -32768 32767.9999 cm -32768 32767.999 m -32768 32767.999 l -32768 32767.999 l -32768 32767.999 l -32768 32767.999 l -32768 32767.999 l -32768 32767.999 l -32768 32767.999 l
Note that in the optimized version the third restore operator is outside the marked content. The BDC/EMC block has three q operators and 2 Q operators.
The same is true of /OC2 - your redline layer.

Using maps in Serbia

When i had nokia n95, i had map of serbia, which was detailed, with main roads, streets in big cities etc. That was on Nokia maps 1.0 .
Now i bought Nokia E71, but there is very poor map of Serbia, on Nokia Maps 2.0 .
So, my question is, can i install first nokia 1.0 on E-71 and put the old maps which were better, and than to upgrade to nokia maps 2.0 ? Will nokia maps 1.0 work on e-71?
THX.
Solved!
Go to Solution.

Typical Nokia. I noticed that, my N95 has good Maps of Serbia, my X6 has one road for Serbia ?? I think someone is lacking progress, 1 step forward 2 steps back. even my Maps of the UK are incorrect, same as for Zurich, not to mention it can be very iffy on where you actually are, you have to wait for to be sure you are actually where it says you are as it can jitter over about a mile. Also sat maps do not work!
whoever is in charge of Maps for Nokia need to go get some work experience with Apple for a while to learn how it is done! actually, the whole of Nokia management need some work experience as things are going worse and worse on every phone release.

HT5429 Why is Apple Maps "List Results" unclickable?

At first i thought this was only a problem with my phone (iPhone 4), however the Apple screenshot in their "Using Maps in iOS6" article shows the same unclickable "List Results" button.
Why would this feature be included but unclickable for everybody? I can find no information on the subject online anywhere. It also makes no sense why the fact that it is unclickable would not be mentioned anywhere on the Apple site.

Same thing but different here in Montana. I tap on my address in Contacts and am taken to someplace about 200 miles away on the map. The street there is not even the same name as my street. I tried tapping a location and dropping a pin to use for my location and using that as my Home. Apple Maps comes up with an address for the dropped pin but when I tap that address in Contacts I shown a location about 5 miles away instead of where I live. Because of these map problems I cannot use Siri to provide location based services related to my Home.
I have reported the problem but so far there has been no fix.

Google maps distance prefs

So it seems that with iPhone OS 3.0.1 the old trick of indicating your preference for miles or kilometers within Maps by changing Settings->General->International->Region Format no longer works. I'm in the U.S. but want Maps to show distances in kilometers (not miles) since that's what the odometer in my car is set to. Now it appears that the distance units are automatically chosen based on either your current location or the country where the driving directions are requested.
Does anyone have a fix for this and why can't there just be a units preference for Maps within the Settings application?
Feature request for OS 3.0.2: add a button for Maps within the Settings app. so that units can be chosen.

I came across this link.
http://tutorial397.easycfm.com/
Hope this might be helpful to you.

No log for am policy agent for iis6

Hello!
Im trying to get Policy Agent for IIS to run on my Win Srv 2003 with IIS6 and Sharepoint Services.
I am running the OpenSSO version of Access Manager.
I have installed the agent and done the initial cofiguration.
When i try to browse the resource i get a login prompt (IIS Basic Auth)and cannot login followed by "Not Authorized 401.3"
I should get redirected to the AM Login page, shouldn't I?
I tried to look for answers in the log file but the /debug/<id> directory i empty.
Anyone know what to do?
The amAgent.properties file:
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://login.lta.mil.se:8080/opensso/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://login.lta.mil.se:8080/opensso/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.sharepoint.lta.mil.se.80
# Set the logging level for the specified logging categories.
# The format of the values is
# <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
# 0 Disable logging from specified module*
# 1 Log error messages
# 2 Log warning and error messages
# 3 Log info, warning, and error messages
# 4 Log debug, info, warning, and error messages
# 5 Like level 4, but with even more debugging messages
# 128 log url access to log file on AM server.
# 256 log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level = 5
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = PN4rEZ1uhx1404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = C:/Sun/Access_Manager/Agents/2.2/iis6/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://sharepoint.lta.mil.se:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organiz ational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://sharepoint.lta.mil.se:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = sharepoint.lta.mil.se
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = true
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port = true
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAuthFilter

If the agent doesnot start properly you would always get redirected to com.sun.am.policy.agents.config.accessdenied.url , if thats not specified you will get a 403.
For the agent itself check that the naming.url is correct. the agent username and passwords are correct, and see that the user has priviledges to write to the agent log files. Apart from these post the windows event logs.

Screen brightness problem iphone 5 ios 6.1.4

The screen will quasi-randomly go to low brightness and be barely readable - auto-dim or not. I can't usually tell what triggered it - it's just not obvious.
However, I found a repeatable pattern (finally) when using it in a car. If I plug in the usb in a car (say a ford), and use both google maps and play tunes or podcasts simultaneously, the brightness is guaranteed to dim after approximately 20 minutes, on its own, without intervention. The auto-brightness switch has no apparent effect on this.
This is, of course, the most annoying defect, because you're using google maps to watch where the f*@k you're going, and then the lights go out and you're fumbling around with brightness while driving.
Anybody else observe this problem?

It's a google maps app setting. I agree, it is highly annoying and I have no idea why they put that setting into the app without the option to change it. I did a 600 mile trip with google maps and the auto screen dimming feature was awful.

IPHONE 4 Screen problem, IPHONE 4 Screen problem

I m using IPHONE 4 ......My phone screen is flickering and fading and white rings are formed around the edges .its working very well till last night but suddenly it happened ...nd phone never fall down i cant understand why these happend.Any body have solution for this problem pls rply me fast tq ...

It's a google maps app setting. I agree, it is highly annoying and I have no idea why they put that setting into the app without the option to change it. I did a 600 mile trip with google maps and the auto screen dimming feature was awful.

How to calibrate after a workout??

Hi!
I have a 3g nano and recently had to replace the sensor . I was reading through the manual that was provided with it and noticed that you can "calibrate using your latest completed workout". So I went on a run (2.70 miles according to nike+) , mapped it out on google maps (3.04 miles), ended my run and looked for a calibrate option (as the manual states). However there was no option except on the main menu page which has the normal calibration method of walking or running a specified distance.
I've tried calibrating the old way by running on a track which threw my sensor way off and this way of "calibrating using your latest workout" option seems to provide hope to fixing my problem of inaccurate readings!
Any help would be appreciated.
Thanks!

Unfortunately, that option is only for 4th generation nano(it doesn't make that qualifier in the printed manual but it does here: http://support.apple.com/kb/HT1616). I would try to find a route of known distance that isn't on a track, where you will run most like you usually do. The maximum it seems to allow is 1.25 miles, I would try to do that for the best results.
good luck and fun running

Iphone 6 screen brightness problem

hello everybody, i have iphone 6 which i am using now for 2 and half months. just from 1 week ago my iPhone 6 screen suddenly goes dim when I'm using it in strong sunny light. i always set my auto brightness on and when i use my phone in sunny light at roof first it gives clear and bright display then suddenly screen goes dim and when i try to maximise brightness level nothing happens it still remains dim and i notice my screen becomes very warm .. then i turn off my phone for few minutes and turn it on the screen brightness again works fine...and auto brightness also works normal..i have noticed this problem 2,3 times whenever i use it in sunny light at the roof..plz give me any suggestion....
iphone 6, 64 gb model iOS version 8.1.2

It's a google maps app setting. I agree, it is highly annoying and I have no idea why they put that setting into the app without the option to change it. I did a 600 mile trip with google maps and the auto screen dimming feature was awful.

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
Selecting United States, for example, will use English units (feet and statute miles).
There may be other methods I'm unaware of.

Map functionality in interactive planning using PC MILER instead of IGS

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Change Maps from KM to Miles

How can I change the maps application (default application) back to miles. For some reason it is displaying in kilometers...

I just noticed last night that after updating my iPhone 3G to the latest software (2.1) mine was mapping directions out in km. I thought that maybe at the time I was picking up a Canadian tower since I was close, but that wasn't the case. I tried it out again this morning and noticed the same thing. This is what I did to fix mine:
Changed the International settings from United States to United Kingdom, clicked back to the main screen, then went back in and changed it back to United States. I powered the phone off, then back on, walla... worked like a charm. Hopefully it works for you. I find that sometimes making changes like that will "force" a refresh on certain settings.

Miles or km in Maps

Similar Messages

Maybe you are looking for