Min Max replenishment

Hi,
i want to know whether is it possible to perform a Min Max replenishment in the WM module. if it is possible then you can explain on how to perform it and how to configure and carry the Min Max replenishment scenario.
thanks,
Maxx

Hi max,
Pls go through,
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
regards
hareesha

Similar Messages

Time phase Min/max replenishment models for future dates

Hi,
We are working on a safety stock requirement of Maximum/Minimum replenishment model in APO.
It seems to work great except it cannot be time phased. Our business wants different safety stock strategies at different times of the year.
Please suggest if there is a way that we could “time phase” min/max replenishment models for future dates?
Thanks in advance for your help!
regards
Yogendra

Many thanks for this.
I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
So -
1. Min Max identifies depot needs replenishing.
2. Central distribution does not have (enough) stock to replenish.
3. Order is made to replenish central distributions stock.
4. We ship whatever we've got, when we've got it, to depot to replenish.
It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
Thanks again.

WMS Min Max replenishment - Auto allocate and create wms task

We using Oracle WMS and want to implement Min Max planning for replenishing from bulk to pick. The Min max report creates the move order but its not allocated and we need to run the Move Order Pick Slip report to create the allocation and wms task. Is there no other way of doing this as we need to pass the move order number when running Move Order Pick Slip report and would like to automate the process.

Hi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock     =   10
Maximum stock     = 100
Replenishment qty =   40
Storage bin stock =    5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh

Min Max Planning to replenish from a single sub inventory

I am new to this site but could certainly use some help in a problem I am having. I am on a team in the process of implement discrete manufacturing. Here is the problem I am having. I am trying to set up min/max replenishment to a specific sub inventory. We currently have a centralized fabricated (make parts) store room. From that store room we move parts to variuos supermarkets with in the factory. From the supermarkets parts are component picked or kan ban replenished. The problem that I am having is that I want the replenishment trigger back to the sheet metal fabrication area to come from the "Centralized Make" parts storeroom. It is currently adding up all the locations or sub inventories the part number resides in to include RIP. I am being told that there is no way to limit the trigger to a single sub inventory.

Sandeep, Thanks I was able to generate and run the report and it did look only that the specified sub inventory and suggested the reorder qty properly. After running the report under the item number it says "unable to generate requisition" How does the fabrication area get a signal to begin the fabrication process, create a discrete job or create a planne order or something? So far your recommendations have been right on target! Again thankyou.

MRP creating cancel notices for min max purchased items

We use min max planning for many repetitive purchased items. These same items are also set to MPS/DRP Planned as well. This is only so we can use the Planned Order report to identify material shortages to flow schedules.
However, MRP exceptions is requesting we cancel our min max purchased items since there is no demand. Can MRP be modified to NOT include min max planning method in cancel requests?
If not, where can I find a tool to identify material shortages for flow schedules?

Many thanks for this.
I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
So -
1. Min Max identifies depot needs replenishing.
2. Central distribution does not have (enough) stock to replenish.
3. Order is made to replenish central distributions stock.
4. We ship whatever we've got, when we've got it, to depot to replenish.
It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
Thanks again.

Min/Max Internal Orders 1 Requisition

We are running Min/Max planning to replenish stock in an "Emergency Warehouse" organization. The requisition import kicks off internal orders to a replenishment organization. The planner in the replenishment organization would like one order for each Min/Max run. The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?

Stick wrote:
The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?In this case the requisitions will not be grouped by Vendor because the supply source is Inventoy which is creating internal requisitions and not purchasing requisition (source is Supplier/ Vendor).
It is important to know how you are importing requisitions and what value is specified for Group By parameter during import. The value you setup in Purchasing Options defaults in the Requisition Import request parameter screen, but this can be changed before submission. So it is possible in your case that requisitions are imported using a different group by than what is specified in Purchasing Options.
From the list of different group by options available (All, Buyer, Category, Item, Supplier) you can probably use 'Location' during requisition import.
Location: Group requisition lines for each delivery location on a separate requisition.
But this will not guarantee 100% success because:
- If you import requisitions with source as INV then those can include requisitions from different INV sources generated from Reorder, Kanban etc having same delivery location. In that case all those requisitions will be grouped under a single header having same location.
- there may be different users running requisition import manually and some may forget to change this group by parameter (defaulted from purchasing options) while importing Min-Max planned requisitions (again they cannot segregate Min-Max, they can just specify INV as source)
A better solution would be to use the oracle provided custom hook (po_reqimp_pkg.post_validate_user_extensions) for requisition import to populate the GROUP_CODE column in PO_REQUISITIONS_INTERFACE table. The logic inside the hook should identify the rows in the interface table generated from each run of Min-Max and populate a unique value for all those rows in the GROUP_CODE column. You need a small piece of code to be added inside the hook.
You can also use REQ_NUMBER_SEGMENT1 column in the interface table to populate an unique value for all rows you want to group together. But in this case the value you specify will become the requisition number if there are no conflicts with the requisition number rule. Both these column, when populated, have precedence over Group by parameter. 1st priority GROUP_CODE (if populated). If GROUP_CODE is not populated then it checks REQ_NUMBER_SEGMENT1. If this is also blank then it uses Group By parameter.
Thanks
Supro

Min-Max Planning concept

Hi Neils,
Can you please throw a light on --> Min-Max Planning Concept and what is the formula for Min-Max
regds
MRR

Hi MRR,
Min-max planning is used to maintain inventory levels for all of your items or selected items. With min-max planning, you specify minimum and maximum inventory levels for your items. When the inventory level for an item (on-hand quantities plus quantities on order) drops below the minimum, Oracle Inventory suggests a new purchase requisition, internal requisition, move order, or job to bring the balance back up to the maximum.
See the Inventory Users Guide > Planning and Replenishment > Min-Max Planning for more detailed description of the principles behind. In addition to Min-Max you may want to consider Reorder Point Planning where you bring demand figures into the calculations.
If you would like to have sales orders or production demands on end-item or sub-assembly levels influence the planning of components then a type of MRP is needed to break down a product structure to lower level material requirements. For even more advanced planning where capacities, constraints and may be even different optimizations objectives are to be considered you have to look at the Advanced Plannning Suite of applications.
Hope this helps ypu in the right direction.
/Niels LM

Min/max MRP and double star planned order

Hi,
What does setting up materials for min/max mean ? Is it just some concept r does it involve some specific settings in the material master ? I know there are minimum and maximum lot sizing procedures available. Are these to be taken into account to set materials up for min/max ?
What does a planned order with two stars in the MD04 screen mean?
Thanks

Dear,
Single *** means order is Firmed and **** means Capacity planning has been done for the planned order.
There is "storage location" MRP with min max levels.
Have a look at the fields on the MRP screens in the material master and you will see the settings you can choose from.
There should be no need for any config as long as your basic MRP config is there.
The normal MRP run will then try to maintain the correct stock level in that storage location and you use the special procurement keys on the material master to determine where the stock should come from to replenish that storage location.
Go to TcodeOMIA here you will find min max for your plant.
Regards,
R.Brahmankar

How to change the Charge Account in Requsitions Generated by Min-Max

Hi
I want to change the default account coming in all requsitions which are generated in result of a min-max report.
please help.
thanks
Malik Asif Joyia

What is your costing method?
If it is average, the account comes from the organization and not from subinventory and you cannot change the account if the destination is inventory.
If it is standard, you can have the account from subinventory, but again you cannot change it if the destination is inventory.
Why do you want to change account if you are receiving into inventory?
And Min-Max Planning is to replenish the inventory hence I would assume it is not expense destination.
Thanks
Nagamohan

Production supply area w/Min Max

Hello,
I have a WM scenario that i want to prototype, and i would like to know the steps involved in this WM scenario.
The scenario is :
Production Area Supply w/ Min Max
Illustrate the material replenishment to the PSA based on min/max levels for raw materials and intermediates; Min level based on requirements for 2 production runs, Max level based on requirements for 3 production runs.
the material for the replenishment is taken from the storage types.
pl. do mention the steps or how to carry out the scenario with the t codes involved in it.
Thanks,
Maxx

I suggest you checking system by two ways:
1) Set PSA to work center, now it works? If so please check BOM settings carefully.
2) Don't use dynamic production bin, just try a physical bin. If it works please check control cycle settings.
Note: You create the dynamic storage bin "production order" in the control cycle for pick parts. The system then stages all the materials for a specific production order in a dynamic storage bin with this production order number.
When you system emit errors again please use LS24 to check if having a dynamic bin with a production order number.

Reorder Planning vs Min Max planning

Hi,
In what business scenarios should we use:
Reorder planning (ROP)
Min Max Planning?
We are implementing INV/PO for a bank where mostly expense items should be used. Also no manufacturing modules are used.
So which planning will be recommended and why?
Also, if re-order planning is suggested, share the set ups (with screen shots), as to how to set up & get the Requisition qty.
Thanks,

Hi,
Reorder planning is like two bin system. When one bin is empty, the demand is fulfilled from the second bin while the replenishment order is generated for the first one. Reorder Planning uses Oracle Inventory forecasting information to calculate average demand.
In min max planning, we maintain 2 levels, minimum and maximum. When the stock goes below the minimum level, the Requisition is created for the Qty =Max level - Qty already in PO/Req - On Hand.
However, option is available while running min-max to include or not include Qty alrady in PO/Req.
In min-max, the min-max levels have to be maintained manually and the demand forecast is not taken into account.
Hope this answers the question.
Atique

Want to set Min Max for a material for PD MRP type

Hi,
I know Maximum stock level field in Material master MRP 2 view ? but where do i maintain minimum stock level? not procured?
My client wants to set up his inventory with Min Max levels using MRP PD?
Thanks and Apprecaites help.
Regards,
Siva

Hi,
If you want to maintain a Max and Min stock level, Maximum stock is shown straight away, you cannot find the Minimum field directly.
if you want to use MRP type PD then go for safety stock that will be your minimum stock level
or else use Re-order point planning, re-order point will be your minimum and Max-level as maximum.
Thanks
Satya

How to Get the min,max and original values in a single query

Hi,
I have a task where in i have to the min , max and the original values of a data set .
I have the data like below and i want the target as well as mentioned below
SOURCE
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT1
SLOT2
SLOT3
SLOT4
SLOT5
SLOT6
SLOT7
SLOT8
SLOT9
SLOT10
1
101
201111
100
100
200
100
100
100
300
300
300
300
1
101
2011112
200
200
200
200
100
100
100
100
200
300
TARGET
DATASOURCE
INTEGRATIONID
SLOT_DATE
SLOT_VALUE
SLOT MIN
SLOT_MAX
SLOT NUMBER
1
101
201111
100
1
2
SLOT1
1
101
201111
100
1
2
SLOT2
1
101
201111
200
3
3
SLOT3
1
101
201111
100
4
6
SLOT4
1
101
201111
100
4
6
SLOT5
1
101
201111
100
4
6
SLOT6
1
101
201111
300
7
10
SLOT7
1
101
201111
300
7
10
SLOT8
1
101
201111
300
7
10
SLOT9
1
101
201111
300
7
10
SLOT10
1
101
2011112
200
1
4
SLOT1
1
101
2011112
200
1
4
SLOT2
1
101
2011112
200
1
4
SLOT3
1
101
2011112
200
1
4
SLOT4
1
101
2011112
100
5
8
SLOT5
1
101
2011112
100
5
8
SLOT6
1
101
2011112
100
5
8
SLOT7
1
101
2011112
100
5
8
SLOT8
1
101
2011112
200
9
9
SLOT9
1
101
2011112
300
10
10
SLOT10
e
so basically i would first denormalize the data using the pivot column and then use min and max to get the slot_start and slot_end.
But then i
can get the min and max ... but not the orignal values as well.
Any thoughts would be appreciated.
Thanks

If you want to end up with one row per slot per datasource etc, and you want the min and max slots that have the same value as the current slot, then you probably need to be using analytic functions, like:
with t as
(SELECT 1 datasource,101    INTEGRATIONID, 201111     slotdate, 100    SLOT1, 100        SLOT2,    200    slot3, 100    slot4, 100    slot5, 100    slot6, 300    slot7, 300    slot8, 300    slot9, 300 slot10 FROM DUAL union all
SELECT 1,    101,    2011112,    200,    200,    200,    200,    100,    100,    100,    100,    200,    300 FROM DUAL),
UNPIVOTED AS
(SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,1 SLOT,SLOT1 SLOT_VALUE
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,2 SLOT,SLOT2
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,3 SLOT,SLOT3
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,4 SLOT,SLOT4
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,5 SLOT,SLOT5
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,6 SLOT,SLOT6
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,7 SLOT,SLOT7
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,8 SLOT,SLOT8
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,9 SLOT,SLOT9
FROM T
UNION ALL
SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,10 SLOT,SLOT10
FROM T)
select DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,min(slot) OVER (partition by datasource,integrationid,slotdate,rn) minslot,
    max(slot) OVER (partition by datasource,integrationid,slotdate,rn) maxslot
FROM
select DATASOURCE,INTEGRATIONID,SLOTDATE,max(rn) over (partition by datasource,integrationid,slotdate order by slot) rn,slot,slot_value
FROM
    (SELECT DATASOURCE,INTEGRATIONID,SLOTDATE,slot,slot_value,
          case when row_number() over (partition by datasource,integrationid,slotdate order by slot) = 1 or
          lag(slot_value) over (partition by datasource,integrationid,slotdate order by slot) <> slot_value
              then row_number() over (partition by datasource,integrationid,slotdate order by slot)
              ELSE null
              END rn
    from unpivoted
order by DATASOURCE,INTEGRATIONID,SLOTDATE,slot

Can I set the min/max for multiple images at once?

I have brought in my page design from photoshop and I don't want any of the images or text to resize when the web browser window is made smaller.
Is there a way to do this without setting each min & max individually?

I answered my own question in the end, I moved them to the parent background

Min/ Max interval data storage

OK, so what I am trying to do is scan 2 voltages at 3K, temporarily write that data to a file or buffer, read the min and max values, and log those to a file once per minute. I'm at the point where I can scan and display the data, but really don't know where to go next. Any thoughts or ideas would be much appreciated. Thanks
Attachments:
NI-6343-2CH VDC min-max.vi ‏45 KB

You only need a single loop. You can use the "elapsed time" express VI to signal when time has elapsed, and simply use a case structure to append the averages to the data before writing (in the false case just wire the current data across). You should also open the file before the loop, append inside the loop, and only close the file once the loop completes. You can use the min&max ptbypt VI to keep track of the min and max for each interval or just keep track of it using a shift register.
LabVIEW Champion . Do more with less code and in less time .

Min Max replenishment

Similar Messages

Maybe you are looking for