Mindstorm software conflict "resource files not found"

Hi All,
my apologies if this is addressed elsew in the forum - searched but did not find any entries.
I am co-teaching a robotics class to middle school students (Lego FLL) and a class to the high school students using LabView 2009 + Lego kit. After installing the Labview environment I (as well as my co-teachers) can no longer run the Mindstorms software. THe error reported is bout resource files not found.
Co any one shed some light on how to have both environments co-exist on the same laptop?
Many thanks
Raynier van Egmond
Vashon Island (WA) USA.

Hi there. Not a problem. This is probably a known conflict between MINDSTORMS 1.0 and LabVIEW. It can be fixed easily. Please see http://digital.ni.com/public.nsf/allkb/4B0C1BBDA9CFEBE7862573D0005D93C4
This might have also affected MINDSTORMS 1.1 but I can't recall.
Joel Sumner
NI-Shanghai

Similar Messages

Adobe pdf resource files not found

All of a sudden I can't convert MS Office 2007 files to PDF. I get the error message 'unable to find adobe pdf resource files.' The solutions recommended on other forums don't work. I can print to abobe PDF.
Using Vista for Business, all service packs.

Have you tried the suggestions from this technical article Error: "Unable to Create Adobe PDF Resource File" when creating a ... ?

File not found, Missing resource bundle

Hi
I have a problem in accessing files (XML and Resource bundles) in Java projects. I used to access these files in WD Java. The same piece of code does not work here.
e.g. When I create a new file object by providing the path name I get a file not found exception. The file exists in my package and I call it this way:
File f = new File("file.txt"); then in an input stream but it doesnt work. However in a J2EE project the same code works.
Similarly the resouce bundle never seems to work even if I give the fully classified class name for the property file. I can access property files in WD Java with ease. I understand that the root path changes and hence the problem. How should I solve it? Is there an elegant way which makes it work in all cases? Please throw some light on the root path for these projects. Thank you.
regards
LNV
Edited by: vln on Jan 16, 2008 9:34 AM

You should be using
<b>this.getClass().getResourceAsStream(filePath)</b>
which will return you an InputStream.
Check the JDK documentation for the respective methods in java.lang.Class and java.lang.ClassLoader.
HTH!
\-- Vladimir

Resource bundle not found in adapter ear file

          Hi,
          I have an ear file which contains a JCA adapter and a resource bundle properties
          file in a jar file. THis jar file is referenced by the rar file. After deploying
          it, the server generates an resource bundle not found exception. The only way
          to make it deploy is to put my adatper jar to the global classpath. This is not
          consistent with EJB deployment. I tested an ear file that contains an EJB jar
          with contains a resource bundle. The server is able to load the resource file
          from the EJB jar as I would expect. Any comments on that? By the way, I tested
          on WLS 6.1 sp1 and sp2. Thanks.
          Siming


          I am having the same problem. Is anything going to be done to fix this?
          "Siming Mu" <[email protected]> wrote:
          >
          >Hi,
          >
          >I have an ear file which contains a JCA adapter and a resource bundle
          >properties
          >file in a jar file. THis jar file is referenced by the rar file. After
          >deploying
          >it, the server generates an resource bundle not found exception. The
          >only way
          >to make it deploy is to put my adatper jar to the global classpath. This
          >is not
          >consistent with EJB deployment. I tested an ear file that contains an
          >EJB jar
          >with contains a resource bundle. The server is able to load the resource
          >file
          >from the EJB jar as I would expect. Any comments on that? By the way,
          >I tested
          >on WLS 6.1 sp1 and sp2. Thanks.
          >
          >Siming

Error Message on U150 - "Bluetooth Software license file not found. [2]"

I've installed a Microsoft Presenter Mouse 8000 on my new Lenovo U150 and now I get an annoying message at startup "Bluetooth Software license file not found. [2]". Everything seems to work fine, but I can't get rid of the message. Any one have any thoughts?

regkey : hkclass\.wid
valuename : shellex
value :
this registry was under file associations. after you do your scan and it shows you your list of problems click the file associations and add the file above to the ignore list. this should fix your problems.

Bluetooth Software license file not found [2]

I get this message very time I start my T61. I have only one device phone that I use bluetooth on and it works fine. Anyone know
how to fix this?
Thanks
Message: bluetooth Software license file not found [2]

I also am waiting for an answer.
I have this same problem on N200 with Vista (yes...i know.....)
Shuky

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder.<br />
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the <b>browser.cache.disk.enable</b> pref on the <b>about:config</b> page to verify that the disk cache is enabled (should be true).

Error 7 Build Error - File not found

I am trying to build my software to another computer over the network. I am able to access the directory I am installing to and the program is not indicating any build errors(all VI's are not broken). This error only occurs when building. Any suggestions would be great.
Thanks,
Nate
The Build was unsuccessful
Possible Reasons: An included VI or one of its dependencies does not exist. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
\\PAINESTORAGE\Engineering\Test & Manufacturing Software\AutoTest Software\Current Version\AutoTest ...
Extended Details: Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> EBUIP_Item_OnDoProperties.vi -> EBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
-Nate
Solved!
Go to Solution.

Is there a way to see a report of the dynamically called VI's? I inherited this software and am relatively new to LabView...
-Nate

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File Not Found Error with FlashHelp

When I deploy and launch my FlashHelp project I get a "Not
Found The requested resource was not found." error in the topic
pane. I'm also not able to reference any of the topics from the TOC
and get the same error.
I just upgraded to RoboHelp v6 and all of this worked fine
when the project was generated using the previous version of
RoboHelp (5).
Does anyone know what changed that might be causing the
problem?

Hello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

File not found error on Uninstall

Hi,
Got a problem with the deinstallation of Labviewer. I deployed Labviewer with all moduls using the setup.exe's and specfiles.
Installation worked fine and the software runs well.
But when I try to uninstall running "uninst.exe /log C:\temp\uninst.log /qb /x all"
It immediatly starts with an error stating "File not found RegDeleteKey" (see Attachment).
Judging by ProcMon and ProcessExplorer the Exception i caused from the nirg.exe.
If I click ok, the deinstallation goes on and finishes. Anyone an Idea on this topic?
Greetings, Alex
Attachments:
NI-Error.JPG ‏32 KB

Yes that is excactly the problem.
The System is Windows 7 64Bit (Enterprise) and I used Labviewer 12. We installed all Modules from the 4 DVDs provided , as this was requested by the department which will use the software.
The error itself seems to be connected to the NIRG module. If I leave NIRG out from the installation, the deinstallation of all other modules works without an error.
Best Regards,
Alexander Jarke

File Not Found error message

I keep getting this message when I try to view my coldfusion
page in my web browser. How do I fix this? I've tried saving it
somewhere else and recreating the file but I still get the message.
Here is the message:
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
File not found: /reviews.cfm
Resources:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
Remote Address 127.0.0.1
Referrer
Date/Time 06-Mar-08 12:31 PM
Stack Trace (click to expand)
coldfusion.runtime.TemplateNotFoundException: File not found:
/reviews.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:89)
at
coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:74)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Debugging Information ColdFusion Server Developer
8,0,0,176276
Template /reviews.cfm
Time Stamp 06-Mar-08 12:31 PM
Locale English (US)
User Agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
Remote IP 127.0.0.1
Host Name localhost
Execution Time
No top level page was found.
Exceptions
12:31:43.043 - coldfusion.runtime.TemplateNotFoundException -
in : line -1
File not found: /reviews.cfm
Scope Variables
CGI Variables:
AUTH_PASSWORD=
AUTH_TYPE=
AUTH_USER=
CERT_COOKIE=
CERT_FLAGS=
CERT_ISSUER=
CERT_KEYSIZE=
CERT_SECRETKEYSIZE=
CERT_SERIALNUMBER=
CERT_SERVER_ISSUER=
CERT_SERVER_SUBJECT=
CERT_SUBJECT=
CF_TEMPLATE_PATH=C:\ColdFusion8\wwwroot\reviews.cfm
CONTENT_LENGTH=
CONTENT_TYPE=
CONTEXT_PATH=
GATEWAY_INTERFACE=
HTTPS=
HTTPS_KEYSIZE=
HTTPS_SECRETKEYSIZE=
HTTPS_SERVER_ISSUER=
HTTPS_SERVER_SUBJECT=
HTTP_ACCEPT=*/*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_CONNECTION=Keep-Alive
HTTP_COOKIE=
HTTP_HOST=localhost:8500
HTTP_REFERER=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT
5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
InfoPath.2; Windows-Media-Player/10.00.00.3990)
PATH_INFO=
PATH_TRANSLATED=C:\ColdFusion8\wwwroot\reviews.cfm
QUERY_STRING=
REMOTE_ADDR=127.0.0.1
REMOTE_HOST=localhost
REMOTE_USER=
REQUEST_METHOD=GET
SCRIPT_NAME=/reviews.cfm
SERVER_NAME=localhost
SERVER_PORT=8500
SERVER_PORT_SECURE=0
SERVER_PROTOCOL=HTTP/1.1
SERVER_SOFTWARE=
WEB_SERVER_API=
Debug Rendering Time: 62 ms

No CFINCLUDE, unless I'm not seeing it. Here's my code:

<cfquery datasource="PFB" name="Ratings">
SELECT *
FROM Ratings
ORDER BY RatingID
</cfquery>

<cfquery datasource="PFB" name="Age">
SELECT *
FROM Age
ORDER BY AgeID
</cfquery>
<html>
<body>
<cfform action="insertnewreview.cfm">
<table>
<tr>
<td>Age:</td>
<td> <select name="AgeID">
<cfoutput query="age">
<option
value="#AgeID#">#Age#</option></cfoutput>
</select>
</td>
</tr>
<tr>
<td><cfoutput
query="question">#Question#</cfoutput></td>
<td><select name="RatingID">
<cfoutput query="ratings"><option
value="#RatingID#">#Rating#</option>
</cfoutput></select></td>
</tr>
</table>
</cfform>
</body>
</html>

Mindstorm software conflict "resource files not found"

Similar Messages

Maybe you are looking for