Minimum privileges needed to create a new page at runtime

Some body know the minimum privileges needed by a user to create a new page at runtime (using PORTAL.WWSBR_API.add_folder). Actualy the user have MANAGE_CONTENT on the parent page where the page need to be create by we got an exception (If we had the MANAGE_CONTENT on the page group, we dont receive this exception)
thanks
J.
Message was edited by:
user510720

You'll need to set the "series" property of the chart. This will be an array of BarSeries objects.
You may also need to set the horizontalAxis and verticalAxis properties for the chart. (I forget if there are defaults for these.)

Similar Messages

Which Privilege needed to create a new Package and Stored procedure usage(in HANA studio)

Hello Friends,
In my company I have access to SYSTEM user(i.e. having all required permissions) ,I wish to create new " USER(s) " for trainees thus which "System privilege" or other privileges is/are needed for the following requirements -
1>To allow the "new user" to create new Packages(and the columnar views inside it and be able to execute,edit them)
2>Create Procedures inside their schema and execute using "call " command
I have given the following privileges as suggested by an ebook (SAP certified author).
The SELECT privilege on the _SYS_BI schema
The SELECT privilege on the _SYS_REPO schema
The EXECUTE privilege on the REPOSITORY_REST procedure
According to my knowledge "create schema" should be given for new schema creation.For my other requirements which all privileges are needed.
Thanx.

In addition to Krishna if you don't want to expose all the package to the trainee, then create a new role keeping everything same as default MODELING role (open it and have a look) but in "PACKAGE PRIVILEGES" add only those package that you want to expose to the end users.
Regards
Kumar

Create a new page format

... Hi everybody !!!
I need to create a new page forma for a checkt: Width 165   / MM,   Height     / Unit       67    / MM
i created it in spad transaction,
Full Administration -> Extended admin -> Device Types
But when i execute the program in order to print the format the system send a message
Device type HPLJ5 does not support page Z165X67, where z165x67 is a format that i created.
I think the problem is in the the definition format Z165X67 associated to devide type, in the actions
( printer initialization, reset after exit, cover page, end of page, etc ), here uses a hexadecimal code and i don'r undestand
this, someone can give me any suggestion.
    Thanks
    Best Regards

.. Hi !!!
I can asociate the new format page, i can print a check, but i have a little problem, when I send to print more than 1 check,
the jump of page is not equal, so the output for the other checks is nor rigth.
   Do you have any suggestion ??
Thanks
Noemí Huerta

Dump error while creating a new page in smartforms URGENT pls!!!

while creating a new page it is showing me a dump error , that the superior program execption was not intercepted , i have even given the next page field also correctly, i have attached a mainwindow to that page and a text element to that . .
thanks
sridhar

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Create a new page in Text Edit?

I know Text Edit has limited functionality but I havent been able to find any tutorials or basic information on Text Edit and eventually I may get Pages or Word for Mac, but for right now, I dont really need anything fancy so I'm hoping Text Edit will work. Im thinking there's no reason you couldn't do a resume even on here - although I think Pages has pre-done layouts which would make it look a lot prettier.
Anyway, simple Text Edit question: Is there just a way to create a new page - basically a page break like you did in Microsoft Word on a PC where you would hit control+enter. Im assuming there should be as that seems like a pretty basic function.
Also if anyone uses Text Edit regularly, can you tell me what are the basic things it can and cannot do...what do you need Pages (Or word for mac) for and for what will Text Edit suffice. (I assume, for example, that Text Edit is not going to allow you to automatically do page numbers while Pages will)

sajam wrote:
I know Text Edit has limited functionality but I havent been able to find any tutorials or basic information on Text Edit
TextEdit->Help->TextEdit Help
https://help.apple.com/textedit/help/10.7/help/index.html?lang=en

Need to add a new page in the SAP Script as last page

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.

Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E           ENDPAGE
/:           NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ENDPAGE'
    EXCEPTIONS
      element = 1
      window = 2.
Thanks,
Ravi.

How do you create a new page when user checks a box?

I guess it would be a check box. I'm looking for a way to have the user select create a new page when the user runs out of space in the text box that is given. So if its possible is there a way to create a new page with a continuing text box when the user has selected the create a new page check box. Thanks.

Hi,
You can achieve this by just making some changes to the textfield (and the page layout).
First, select the textfield and then in the Layout palette, tick 'expand' height to fit'. When you preview the form, you will see that as you type information into the field, a scroll bar will appear. When you exit the field, it will expand automatically to display the full contents.
Now the problem will be that the textfield will expand over objects that are positioned below it - not good!
So what you need to do is set up your form for a flowed layout. First select all of the objects that do not grow in size and wrap them inside a 'positioned subform'. When you select the subform you can see this setting in the Object > Subform palette. You should name the subforms in the hierarchy. So you will end up with a positioned subform above your textfield and a positioned subform beneath your textfield (if you have objects beneath it).
Then select page1 in the hierarchy and in the Object > Subform palette, change the content to 'flowed'. Hopefully the layout won't change too much (because you will have most of your objects in their positioned subform).
Last step is to select the textfield and in the Object > Field palette tick 'Allow page breaks within content'. This tells Acrobat/Reader to split the object if it overflows onto a new page.
Now save the form as a Dynamic XML Form in the save as dialog and previewed it. Now when the textfield expands it will push objects beneath it down. Also when it gets to the bottom of the page, it will start a new page automatically and continue the content on the new page.
Here is an example:
https://acrobat.com/#d=kwa4t2vu6mXbgMCyqEF0aQ
Paul Guerette is giving an online tech talk on dynamic forms on the 30 November, which I would recommend. Details here:
http://acrobatusers.com/events/49326/tech-talk-developing-flowable-form-content
Hope that helps,
Niall

Needed to create a new cost element hierarchy to come in line

needed to create a new cost element hierarchy to come in line with Victory reporting. I went into create new group and referenced NETEXPS2.RD so that I could then edit it.
I made all the changes required for the new hierarchy NETEXPS3.RD. Unfortunately some of the changes I made have changed NETEXPS2.RD.
Is this my fault for referencing? Is there any way of going back to the original NETEXPS2.RD version and fixing it?
Please suggest for the above.
Regards
Srinivas.

In addition to Krishna if you don't want to expose all the package to the trainee, then create a new role keeping everything same as default MODELING role (open it and have a look) but in "PACKAGE PRIVILEGES" add only those package that you want to expose to the end users.
Regards
Kumar

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

Hi kamfong,
Went to Settings where?
If you want to use your exisiting Apple ID on your iPad, you need to:
1. Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
2. Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
Cheers,
GB

I know my Apple Id (not .mac) and password but I can't logon to ichat. I keep getting a message of password not matched. Do I need to create a new account for Ichat?

I know my Apple Id (it isn't ".mac") and password but I can't log on to ichat. I keep getting a message of password not matched. I saw somewhere that my Apple id is the same as my ichat account. Do I need to create a new account for Ichat? I've already reset my Apple id password 3 times in the last 2 days. What am I doing wrong?

Hi,
At one time only Email IDs from Apple (when it was just @Mac.com) were referred to as "Apple IDs"
Other IDs such as to log in to Discussions were know as Discussion IDs
Things like the Online Store and iTunes and Apple realising that people would prefer one ID to have access to Everything tended to move things together.
There can be a variety of combos now
iChat Name
@mac.com before MobileMe
@mac.com post MobileMe
AIM Names
AIM names current
MobileMe (@Me.com)
Style
Email Address valid with the .Mac service prior MobileMe Note 1
Email style Name Valid with AIM
May or may not be an Email address
Can be AIM issued or third party Email address
Valid Email with MobileMe Service
Other Abilities
May also be Currently valid email linked to a MobileMe account
Maybe Valid Apple ID
Is a Valid AIM Screen Name
May Not be a Valid Apple ID (was an option choice at one stage)
Is a Valid AIM Screen Name
May not look like an Email (No @whatever.com) but may be linked to either an AOL email account or AIM one
Current Registration seems to be pushing Email registration (@AIM.com)or asking to use another you currently use.
Trial Accounts are limited to the Trial Period Only as Emails, Valid AIM Screen Names and Apple IDs.
Apple ID
Possibly (likely)
Possibly (depends when Registered)
More currently Yes.
No
No
Yes
Glad I could help.
8:39 PM Thursday; September 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to create a new page as a hyperlink to an external one?

I've been trying to solve this for like 2 hours and still haven't found the way!
When you create a new page in iWeb, it automatically adds its name into the navbar and creates a new page and folder with its content. Well, I want to create a new page that is a link to an outside webpage opening in a new tab. How do i do this? Editing the new page .html? I've tried that, but what should I write?
Anyway, hope somebody can give me a hand...
Thanx!

This may be what you're looking for:
http://discussions.apple.com/message.jspa?messageID=9105295#9105295

How can I create a new page in pages, without creating a new section?

how can I create a new page in pages, without creating a new section?

Good morning graywright,
It sounds as if what you are wanting to do in the Pages application is to insert a Page Break. Follow the steps in this article -
Pages '09: Inserting a Page Break
In a word processing document, click where you want the break to occur, and then choose Insert > Page Break.
To remove a page break, click at the beginning of the line that follows the break and press the Delete key.
In a page layout document, to insert a new page in your document, click Pages in the toolbar and choose from the template page options available.
Thanks for using Apple Support Communities.
Best,
Brett L

Need to create a new row in table with same data as Primary key, but new PK

Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kale

user9970447 wrote:
Hello Gurus ,
I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
Any ideas of how it can be done without much complication?
Thanks in advance for your reply.
Reards,
Swapneel Kalesomething like
insert into mytable values ('literal for new pk',
                                       select non-pk-1,
                                                non-pk-2,
                                                non-pk-n
                                       from mytable
                                       where pk-col = 'literal for existing pk')

Minimum privileges needed to create a new page at runtime

Similar Messages

Maybe you are looking for