MINUTELY dropouts - help please
So the airport in the office will, in very frequent intervals, I'm talking 10-15 minutes at a time, stop transmitting data. this happens with our Mac Pro, assorted computers, and my Macbook Pro (n-enabled). I have the gMail notifier installed, and will go from showing my email status, to no connection, and back despite the airport still shows its connected. Once in a while the airport will completely disconnect and disappear off the air. And when it reappears, it errors out while trying to connect to it. It all started about the time the firmware was upgraded to 7.2.1. All clients are Mac wireless, running OS X 10.4.11. We normally have 6 clients, at most 8.
It has to be the airport because my airport at home is identical, down to the firmware, and I have no problems with it. My home network also shares a network drive and printer. The office setup is driving us nuts. If anyone has ideas, please help.
I also seem to be experiencing this problem. We are on 10.5.1 and it seemed to start about the time I did the most recent system update. We have two laptops on our wireless network and I will frequently map to a drive on my desktop. This drive will get disconnected every 10 min or so and I'll loose my internet connection at the same time. We also use Airtunes to play music on our stero and though we sometimes had issues with interference from other wireless devices, it has gotten 10 times worse. We basically can't stream music to the stereo now.
Sorry I don't have any solutions. I've tried tweaking the configuration of the base station to no avail.
Similar Messages
-
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
my ipod touch is disabled for 22 million minutes and I want to fix it but I dont want to lose my pictures and everything else. Help please I dont remember the last time I updated it. Idk I think its been a year in an half since I known about it being disabled. What do I do? Im scared to restore it because I dont want to lose my stuff.
You have to restore and thus erase your iPod. that is how it works.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer -
My Mac g5 starts and goes to finder. The desktop has disappeared. Also the circle keeps spinning. It will stop for a minute, then start again. It acts like something is running. I have restarted multiple times. Can anyone help please? Thank you.
Spinning Beach Ball
Spinning Beach ball (2) -
Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!
Startup – Question Mark
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3) -
Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.
Hey Ian
That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Thank you for using the Apple Support Community.
-Norm G. -
I have a macbook pro. The wireless is always conected but it keeps stopping uring browsing for some minutes. However i am using teh same wireless on my iphone and it wok normaly without any stop or cut. Any help please?
I'm having the same issue. Different programs though, it's mostly browsers and adobe products. I thought maybe it was heat related but it's not. It seems that as soon as Lion was about to be released, the updates were updating in preparation for Lion. I delayed updating the software updates because Adobe (my career) isn't totally compatible with Lion yet. Before I even started getting update notifications, though, within the recent week, it's freezing up constantly. I don't know what to do. It seems to be happening with my brower choice, I'm using Firefox and Chrome as my main browsers. I keep alot of sessions open but that shouldn't cause (and has never caused) this constant freezing issue. I did install some extensions in Chrome and Firefox, maybe that's the problem... The issues began after those were installed though, 3 weeks to a month later... Maybe the software updates (that I installed thinking it would correct the freezing issue), maybe they are preventing other browsers ? Maybe Apple is getting rid of Chrome and Firefox ? I'm not having issues with Safari (yet) though I just opened it for the first time in 2 months... only because the macbook is freezing (and it's also rebooting while asleep, closing all of my projects and not saving them)...
My Macbook Pro is the same year and the HDD is a year new. The manufacture recall had the video whatever replaced a few months ago.
I've never had these kinds of problems with an Apple computer. I'm using Snow Leopard and I'm very attached to this laptop ! It's configured perfectly.
Why oh why does it freeze constantly within the recent 1-2 weeks ?
Someone please help us ! -
I turned off my iPad, but when I went to turn it back on, the apple logo just stays there. It's been there for 10 minutes, and hasn't gone away. Help please.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
-
Creative live cam voice help please
Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
ArthurThanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur -
My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing works. Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.
Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Firewire Port not working, URGENT help please¡¡¡
Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671",
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.3.8671",
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
"/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!! -
Brand new AEBS ver7 firmware
Works fine on the network and to the gateway for the internet.
Plug in a Lacie320 drive tot he USB, it sees it, it appears to work (but slow) for a while. Leave it to backup and when I return the disk has dismounted? Gone
Cant look at logs as I cannot reconnect without rebooting the router at which time the logs all are deleted.
If I try to reconnect it gives me an error connecting to Airport.
Only way out is to reboot AEBS.
If I try to delete files from the hard drive when connected it hangs, computer has timer going round forever message box is open but is not scanning files to delete, it is as if it can't see the drive and is searching...plus it has a small message box I cannot read (half off the screen), only way out of this is a physical reboot (hold power button down for 4 secs)
Now I have the drive on the USB direct to the machine, works great. So is this a firmware issue on the Airport unit?
Help please, I have spent days messing around with this and am about to give it up.
MacBookPro DualCore Mac OS X (10.4.8)
MacBookPro DualCore Mac OS X (10.4.8)If you look in the iTunes folder on your original hard drive you should find a lot of files named "Temp File". These need to be deleted. I have not figured out what causes these or how to stop them from being made. If anyone knows the answer it would be greatly appreciated. When I delete mine it takes a very long time for them to delete, not the 2 minutes that countdown clock claims!
Dell 5100 Windows XP -
Need Urgent help please? I need to restore from a previous iphone backup.
Oops, I admit it - I messed up but need help please?? I received a replacement iphone today. My broken iphone OS and my itunes had the latest software updates and I did a full backup before going to the store to get the rerplacement. However, when I got home with the replacement iphone and plugged it in, it asked if I wanted to update the OS on it. I made the mistake of saying yes. It then made a backup of the empty factory settings from the new replacement and restored from that rahter than the backup I made before going to the store. Yes I know I should have said no and just did the restore which would have resotred my previous backup that I made before going to the store. Then after everything would be allright I could have told it to update the OS.
You can slap my in the face or I will do it myslef for making such a stupid mistake. All ready did the "I should have had a V" thing to my forehead.
After seeing the restore was fromthe factory settings rather than my earlier good backup, I went into my documents and drilled down to the mobile sync backup and saw that one of the three folders (with giberish as a title) has a lot of information with the date and time I did the backup before going to the store.
Could I possibly delete the later (factory setting backup) folder and then do a restore to get my good backup onto the iphone? I didn't do that yet in fear that it might mess something else up on the iphone and I wanted to check with you experts here first for guidance and assistance, PLEASE?
I'll be anxiously awaiting any help you can give!
Thank you!!rwmac22 wrote:
Hopt and OneOrangeTree, Thank you both very much for replying!!
It took me a long time to get back to the dissucison group because I tried both of your suggestions which therfore had to do about 4 restores. They take quite a while (about 50 minutes each actually). Your help got me half way there and is very apprecaited! I did manage (with your excellent help) to get most of my backup put onto the replaced iphone. the photos, music, and videos didn't get put over. I think I can move those back over by making sure they are selected in the seperate tabbed screens for the iphone. However, I can't get to those screens because every time I connect the iphone now, it brings up the "set up your phone screen". The one with the "an iphone has been previously synced with this compter" setup as new phone or restore from ....
Well I did the resotre from 3 times and that page still comes up when I plug in the iphone. Yes, I did close itunes, reboot the PC, and powered off the iphone and then brouhgt it back up before connecting (all several times), but itunes still takes me to the same "setup iphone screen".
Can you help me to get it to the standard iphone screen and there I will make sure the selected items are checked and do a sync.
Please know I do appreicate your kind assistance so far and hope someone can get me the rest of the way!
The "Backup" do not store your Applications, Music, Video's. It saves your settings, your application preferences, etc. -
I'm using iMovie to prepare a short holiday video. Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills. I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers. Can anyone help please. Thanks.
I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
Thanks for any help on this.
Maybe you are looking for
-
i am very upset that when my computer broke and i went to put new songs on my ipod and it said that i would be loseing all previously bought songs and apps that i do not have saved or anything anywhere else if i sync will i lose everything? if so can
-
Logical operations on different systemgroups
Hi, I want to define several systemgroups in the transaction RZ21 on a central monitoring system. Afterwards I want to make logical operations on these groups (like: group1 and group2) in the monitor definition. Is this possible and in what way? I ha
-
Procurement confirmation wizard and multiple Purchase quotes
Hi Experts, I have played around with the Procurement confirmation wizard in 8.81 and tried to get this to create multiple Purchase Quotes from one Sales Order. In the Help file and 8.81 documentation it specifies that this is possible. I could not g
-
How to view the input rate request xml?
Hi Frens, please help on viewing the input rate request xml. I am not able to view the input xml(don't know to view). tell where I have to go and view that XML file. I am using oracle insbridge rate manager version 4.00.0. thanks in advance.
-
Preview renders adding extra frames exponentially in Premiere Pro CC 2014
Having this strange anomaly happen when rendering previews. The preview render dialogue box starts adding extra frames and the thing becomes an exponential loop gradually moving to 100% but never reaching it even if the render is only 10 frames long.