Missing data in EWA session

Hi All,
we have succesfully done EWA session for non-ABAP system (Enterprise Portal 7.0).
However inside the report we can't find several information:
- in section 1.1 Hardware Configuration n° of CPU and Memory are not describe
- in Java Performance not all part are pull out.
Some one can help to solve this issue?
Many thanks.

Hello Alesandro,
If the data is in the Workload analysis, this means that SMD wrote the data to the Solman BI.
As I refered to earlier SAP Note 1332428 has a trouble shooting guide attached for non-ABAP systems.
Things you may want 6to check now is the BI RFC is properly defined in the the proper table.E2E_WA_CONFIG.
You want to retrieve the RFC destination so you can check the RFC. This transfers the data from the BI to the Service Session.
You want to check the RFC user has the correct authorizations and role SAP_BI_EXE.
The person executing the session will need SAP_SM_BI_EXTRACTOR.
You want to make sure the data is beign aggegated, so check E2E_HK_CONTROLLER is runnign without issue and the
0SMD_PE2H has data and is reflected in 0SMD_PE2D.
Again these steps and more are int he Troubleshooting guide attached to SAP Note 1332428, so that would be your next step. Download the note, extract the guide and follow it. This should lead you to the problem.
Regards,
Paul

Similar Messages

JAVA Performance data in EWA is missing.

Hi SAP-experts,
our EWA is missing the JAVA performance data. In transaction
u201CSOLMAN_WORKCENTER->Root Cause Analysis->End-to-End-Analysis->JAVA-System-><One of our java-system>->Workload Analysis-><SID> - Applicaton Server Javau201D
no data for E2E Metric Type Variable(multiple values) SERVLETS is available. And in transaction
SOLMAN_WORKCENTER->Root Cause Analysis->End-to-End-Analysis->JAVA-System-><One of our java-system>->Workload Analysis->Overviewu201D
all KPIs are u201Cn/au201D.
The transaction LISTCUBE (Infoprovider=0SMD_PE2H) shows no entries for selection :
Metric Type: HTTP SESSIONS
System ID: <SID of Java System>
Calendar Day: <startday> to <endday>
(Recommended by Dokument: End-to-End Diagnostics Trouble Shooting Guide missing data in service session from BI/CCDB)
The Extractors E2E_JAVA_EXTRACTOR_* are running.
Introscope Extractors are scheduled for the managed system Checked it in table E2E_ACTIVE_WLI.
Records are loaded. Checked Table E2E_EFWK_STATUS.
(Recommended by Dokument: End-to-End Diagnostics Trouble Shooting Guide missing data in service session from BI/CCDB)
The spool of job E2E HKCONTROLLER shows this error:
Target Infocube: 0SMD_PE2D
Source Infocube: 0SMD_PE2H
Destination    : NONE
Aggregator     :
E2E_HK_AGGREGATE
HK: Calling SMD_HOUSEKEEPER at NONE
HK: Error detected by SMD_HK_AGGREGATE
HK: Status :     0
HK: Message:
RSAPO_CLOSE_TRANS_REQUEST failed
HK: New Requests found:
APO_R4NGX6OEQD7GGFVSO540DFAIRW
APO_R4NGSA2CB8MO33L1833NBXTV9O
Runtime [s]:           9
In my opinion there is a problem with the data transfer in the infoproviders 0SMD_PE2D and 0SMD_PE2D. What further checks can I do and how can I resolve this problem?
Best regards
Willi Eimler

last part of the version data
(IA64)[hp10202:root]/usr/sap/hostctrl/exe> saphostexec -status
saphostexec running (pid = 20880)
sapstartsrv running (pid = 20894)
09:31:00 13.10.2011     LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 12780)
(IA64)[hp10202:root]/usr/sap/hostctrl/exe> saphostexec -version
Component ********************
./saphostexec: 720, patch 92, changelist 1256713, hpia64, opt (Jun 15 2011, 22:42:14)
./sapcimc: 720, patch 92, changelist 1256713, hpia64, opt (Jun 15 2011, 22:42:14)
SAPHOSTAGENT information
kernel release                720
kernel make variant           720_REL
compiled on                   HP-UX B.11.23 U ia64 for hpia64
compiled for                  64 BIT
compilation mode              Non-Unicode
compile time                  Jun 15 2011 22:37:28
patch number                  68
latest change number          1256713
supported environment
operating system
HP-UX B.11

EWA" Dates for this session are overdue "

Dear All,
Im now configuring EWA report but i always got Red Flag for the satillite system said that "Dates for this session are overdue" and there is no two bottle apear. please help me..
Thanks so much.

Hi,
That error is because your managed system is not sending the required EWA data to your SolMan for processing.
Please check the following to make sure all steps are correct for EWA processing:
Check RFCs in Solution Manager to your system that the EWA is for.
Also check the Back RFC to SolMan in the managed system.
Also check in the managed system, transaction SDCCN and make sure the maintenance package is running and scheduled periodically!
Finally ensure the Task Processor is active and scheduled in SolMan via transaction SDCCN > Goto > Settings > Task Processor.
Lastly check in the managed system that the RFC for the maintenance package is set to your SolMan via transaction SDCCN > Goto > Settings > Task Specific > icon next to RFC Destinations > Settings. Ensure the Back RFC to SolMan is set as the master.
To do this, go to SMSY in SolMan > Environment > SolMan Operations > Administration SDCCN and ensure your managed system is there and SolMan is the master.
You may even have outstanding jobs for this system in SDCCN of SolMan which you can run to process the EWA data if you do not have a periodic Maintenance Package correctly running in SolMan.
All of these checks will solve your issue and make sure EWA is working.
If you find the answer, please post what the mistake was, I am curious
Regards,
-Rohan
Edited by: Rohan Parikh on Dec 9, 2009 4:42 PM

Problem in EWA session data sent to SAP

Hi all,
I am trying to finalise EWA for all my SAP production instances. So far I am able to send EWA session to my Solution manager system or to SAP directly (i.e. to O01)
In the solution manager system under the edit Solution option there is a button "setup EWA". After clicking on this and enabling EWA, there is a check box which says "Send to SAP". I have enabled this check box.
Now does this mean that when the EWA session data arrives in the Solution Manager system, it is also sent to SAP ?
This was my understanding of the checkbox. Also when the EWA report arrives in the Solution Manager system, there is an envelope icon against the report. The tooltip of the icon says "Session data sent to SAP". However when I look at the service channel inbox the session is not visible.
Does anyone have any idea what the problem could be ?
regards,
Kevin Hill

Hi all,
This is what SAP had to say.
quote from SAP reply *********
Please note that not every session follows this path:
Satellite system -> Solution Manager system -> SAP.
All red sessions are forwarded like this. If all is well, and the sessions are always rated green and yellow, only 1 session per system is forwarded every 4 weeks. None of these forwarded sessions create Service Messages. We have access to the actual session and data, and the customer already has the corresponding reports in the Solution
Manager System.
The reports sent to SAP are for SAP's records only. They are not sent back through Service Messages. If you send a red report to SAP, SAP will investigate the cause of the red rating and contact you. It is not possible to receive these reports back on the SAP Service
MarketPlace.
The only sessions that create Service Messages are those sent directly to SAP ( without Solution Manager). They are created as per SAP Note 207223, and the session numbers in SDCC start Z...xx.
quote from SAP reply *********
Well that settles it I guess. However it definitely was not clear from the FAQ and the docs. SAP's reply makes sense as there is no reason why the session report should be available in both the Solman system as well in the services messages.
regards,
Kevin Hill

ORA-01173: data dictionary indicates missing data file from system tablespa

Hello
My Database is 11gR1 and Linux is the OS. Thought of posting it as a new thread as things have changed a lot.
2 of my database file were lost due to hardware failure. (the datafile do not belong to SYSTEM TABLESPACE) and and the second was datafile for undo tablespace.
I created control files with command not mentioning the lost datafiles:
CREATE CONTROLFILE REUSE DATABASE "BSSGLB" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 5
MAXDATAFILES 600
MAXINSTANCES 10
MAXLOGHISTORY 1168
LOGFILE
GROUP 1 '/DB/app/oracle/oradata/bssglb/redo01.log' SIZE 500M,
GROUP 2 '/DB/app/oracle/oradata/bssglb/redo02.log' SIZE 500M,
GROUP 3 '/DB/app/oracle/oradata/bssglb/redo03.log' SIZE 500M
-- STANDBY LOGFILE
DATAFILE
'/DB/app/oracle/oradata/bssglb/system01.dbf',
'/DB/app/oracle/oradata/bssglb/sysaux01.dbf',
'/DB/app/oracle/oradata/bssglb/users01.dbf',
'/DB/app/oracle/oradata/bssglb/bss01.dbf',
'/var/oracle/oradata/bssglb/bss02',
'/var/oracle/oradata/bssglb/system02.dbf'
CHARACTER SET US7ASCII
I have all the files mentioned in the datafile section of the above command.
But somehow when i try to open the DB, first it asks for the media recover. When i recover database then it disconnects database saying:
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Process ID: 4768
Session ID: 170 Serial number: 5
Contents of the alert log file are:
Beginning crash recovery of 1 threads
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Started redo application at
Thread 1: logseq 7, block 2, scn 20356182450
Recovery of Online Redo Log: Thread 1 Group 1 Seq 7 Reading mem 0
Mem# 0: /DB/app/oracle/oradata/bssglb/redo01.log
Completed redo application
Completed crash recovery at
Thread 1: logseq 7, block 3, scn 20356202453
0 data blocks read, 0 data blocks written, 1 redo blocks read
Sun Feb 20 08:16:23 2011
Thread 1 advanced to log sequence 8
Thread 1 opened at log sequence 8
Current log# 2 seq# 8 mem# 0: /DB/app/oracle/oradata/bssglb/redo02.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sun Feb 20 08:16:23 2011
SMON: enabling cache recovery
Errors in file /Oracle/app/oracle/diag/rdbms/bssglb/bssglb/trace/bssglb_ora_4550.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Error 1173 happened during db open, shutting down database
USER (ospid: 4550): terminating the instance due to error 1173
Sun Feb 20 08:16:25 2011
Instance terminated by USER, pid = 4550
ORA-1092 signalled during: alter database open...
ORA-1092 : opiodr aborting process unknown ospid (4550_182910338848)
Sun Feb 20 08:16:26 2011
ORA-1092 : opitsk aborting process
Guys please help me out of this situation.
Regards, Imran

STOP opening new threads for ongoing solution to SAME problem
Re: I have copy of data files! How to install and add these files to database!
Re: Failure of network storage!
Re: I have copy of data files! How to install and add these files to database!
Handle:      misterimran
Email:      misterimran
Status Level:      Newbie
Registered:      Jan 15, 2002
Total Posts:      1,109
Total Questions:      130 (115 unresolved)
so many questions & so few answers!
Edited by: sb92075 on Feb 19, 2011 7:49 PM

ORA-19612: datafile 0 not restored due to missing data

Hello,
I'm testing a restore of the controlfile. The database is in archivelog mode and autobackup is set to ON. I successfully did a full backup and backup as copy database.
To test I did the following:
- note the DBID
- shutdown the database
- renamed both controlfiles:
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
When I try to restore the controlfile form autobackup I receive the following error. What could be reason please?
[rcat@oel54]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
executing command: SET DBID
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/10/2010 00:09:55
ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
ORA-19612: datafile 0 not restored due to missing data
$ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
-rw-r----- 1 oracle dba 10354688 Dec 9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkpThanks!

The file was indeed corrupted as below will show.
Very strange. Perhaps something with the latest Virtualbox or the SSD/hybrid harddrive. (host MacOSX 10.6, guest Oracle Linux 5.5 UEK)
$ mv /u02/rcat/control01.ctl_old /u02/rcat/control01.ctl
$ mv /u02/fra/rcat/control02.ctl_old /u02/fra/rcat/control02.ctl
SQL> startup mount
ORACLE instance started.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database open;
Database altered.
$ rman target /
connected to target database: RCAT (DBID=502889862)
RMAN> backup current controlfile;
piece handle=/u02/fra/RCAT/backupset/2010_12_10/o1_mf_ncnnf_TAG20101210T012420_6j2wsoko_.bkp
Finished backup at 10-DEC-10
Starting Control File and SPFILE Autobackup at 10-DEC-10
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 10-DEC-10
RMAN> restore validate controlfile;
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp tag=TAG20101210T012422
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: validation complete, elapsed time: 00:00:02
Finished restore at 10-DEC-10
SQL> shutdown immediate
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
SQL> startup nomount
$ rman target /
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp
channel ORA_DISK_1: control file restore from AUTOBACKUP complete
output file name=/u02/rcat/control01.ctl
output file name=/u02/fra/rcat/control02.ctl
Finished restore at 10-DEC-10

EWA session not created after refresh_session in SDCCN

Hi All,
I have configured EWA in our SolMan 7.1 for our managed system SAP BW 7.0, and to test it, I've been trying to create an adhoc EWA report manually. However, after the completion of refresh_session tasks in the managed system's SDCCN, no EWA session is being created.
I have already followed instructions in SAP Note 1769513 - EWA not generated - session data is overdue (red flag status), but I'm still stuck with this error.
Please advise.
Thanks.

Hi,
You are using solution manager 7.1, so here are couple on KBAs which can help you to get the EWAs.
1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1
1924199 - EarlyWatch Alert Management SP10+
Also follow the recommendations of RTCCTOOL.
To generate an Ad-hoc EWA, yo can look into this wiki.
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
Further, to understand and troubleshoot, please read the EWA workflow
The EWA workflow - a closer look - Solution Manager - SCN Wiki
I hope, all this should help you in fixing your issue.
Regards

Showing Grey Colour on EWA session

Hi,
When iam creating EWA i did all settings in satelite systems.after that in my solution manger its showing the before EWA session showing grey colour(showing only 2 pages).in right side i cliked genrated word report its showing only 2 pages.what could be the reason for this.
Thanku

Hi David,
We too in same race.
As mentioned in note 762696, I found that EWA is scheduled for the same date to both of our Satelite System(DEV - System ID) as well as the Solution Manager System(SMD - System ID).
So i manually actiavted the task of EWA(EarlyWatch Alert for Solution Manager) of SMD.
But the log ends with more warnings. The same list of warnings we get at my Satelite System(DEV) also.
CMO_NUMBERRANGES_CHECK : no matching interface found
SMWM_READ_SMOFPARSFA : no matching interface found
SMWM_PREPARE_SMOHSITEID : no matching interface found
CRMCUE_TABSIZES_SMO : no matching interface found
CRMCUE_QUEUES_MW : no matching interface found
CRMCUE_ORDER01 : no matching interface found
CRMCUE_DOWNLOAD_SMWMCOMM : no matching interface found
CRMCUE_BDOC_IN_ERROR : no matching interface found
SCAG_RFC_GET_USAGE_DATA : no matching interface found
NON_CHAR_CIAP_IN_CHAR_TABLE : no matching interface found
GET_CUSTOMIZING_INFO : no matching interface found
EWA_GET_CPU_TIME : no matching interface found
SYSTEM_INFO : no matching interface found
GET_MEM_ALL : no matching interface found
GET_FSYS_SINGLE : no matching interface found
GET_CPU_ALL : no matching interface found
FILL_SNAPSHOT_DATA : no matching interface found
TH_SAPREL : no matching interface found
TH_REQUEST_QUEUE : no matching interface found
STNL_TST_SETLOCALE_FOR_ILANG : no matching interface found
STNL_GET_TCP0C_FOR_ILANG : no matching interface found
STNL_GET_ILANG : no matching interface found
STNL_CHK_LOCALE_FOR_ILANG : no matching interface found
STNL_CHK_ILANG_IN_CPNORM : no matching interface found
STNL_CHK_CPNORM_FOR_ILANG : no matching interface found
SAPWL_WORKLOAD_GET_SUMMARY_I_X : no matching interface found
SAPWL_WORKLOAD_GET_SUMMARY_I_W : no matching interface found
SAPWL_WORKLOAD_GET_STATIST_I_W : no matching interface found
SAPWL_TCODE_AGGREGATION_I_U_W : no matching interface found
SAPWL_TCODE_AGGREGATION_I_T_W : no matching interface found
SAPWL_TCODE_AGGREGATION_I_M_W : no matching interface found
SAPTUNE_HISTORY_DIRECTORY : no matching interface found
SAPTUNE_GET_SUMMARY_STATISTIC : no matching interface found
PROFILE_FROM_PAHI/S : no matching interface found
EW_TH_WPINFO : no matching interface found
SL_RFC_SE06 : no matching interface found
EWA_TMS_GET_MOD_OBJECTS : no matching interface found
SALR_MON_GET_J2EE : no matching interface found
GET_TAB_TBE11 : no matching interface found
MEC_COUNTRY_VERSION : no matching interface found
TH_SERVER_LIST : no matching interface found
SYSTEM_SWITCH_GET : no matching interface found
STNL_TST_DBMS_CHARACTERSET : no matching interface found
STNL_GET_TCPDB : no matching interface found
STNL_GET_TCP0D : no matching interface found
STNL_GET_LANG_DATA_STATUS : no matching interface found
STNL_CHK_OUTPUT_DEVICES : no matching interface found
SL_RFC_GET_CLIENT_REMOTE_3X : no matching interface found
SEWA_GET_WP_DATA : no matching interface found
SEWA_GET_UPDATE_ERRORS : no matching interface found
SEWA_GET_COLLECTOR_PROTOCOLS : no matching interface found
SEWA_GET_ABAP_DUMPS : no matching interface found
SCUI_GET_NORMAL_OP_MODES : no matching interface found
SCUI_GET_BATCH_INPUT_INFO : no matching interface found
SCUI_GET_ARCHIVE_INFO : no matching interface found
SALR_MON_GET_EWA_SERVER : no matching interface found
SALR_MON_GET_EWA_ITS : no matching interface found
RSFEC_DATA_READ : no matching interface found
RSDDCVER_RFC_BW_WHM_STAT : no matching interface found
RSDDCVER_RFC_BW_STATISTICS_2 : no matching interface found
RSDDCVER_RFC_BW_STATISTICS : no matching interface found
RSDDCVER_RFC_BW_AGGR_STAT : no matching interface found
RSDDCVER_AGGREGATES : no matching interface found
OCS_GET_INFO : no matching interface found
IS_UNICODE_SYSTEM : no matching interface found
EW_DLD_NOTES_INFO : no matching interface found
CMO_ANALYZE_JOBS : no matching interface found
> GET_ORA_SYS_TABLE_DBA_SEGMENTS : # of imp params in funcmod > # of imp params in mod 000111
> GET_ORA_SYS_TABLE_DBA_SEGMENTS : inconsistency in # of imp params found for mod 000111
> GET_ORA_SYS_TABLE_V_BUFF_STATS : # of imp params in funcmod > # of imp params in mod 000110
> GET_ORA_SYS_TABLE_V_BUFF_STATS : inconsistency in # of imp params found for mod 000110
> GET_ORA_SYS_TABLE_DBA_TABLES : # of imp params in funcmod > # of imp params in mod 000068
> GET_ORA_SYS_TABLE_DBA_TABLES : inconsistency in # of imp params found for mod 000068
> GET_ORA_SYS_TABLE_DBA_FEATURE : # of imp params in funcmod > # of imp params in mod 000096
> GET_ORA_SYS_TABLE_DBA_FEATURE : inconsistency in # of imp params found for mod 000096
> GET_ORA_SYS_TABLE_V_NLS_PARAM : # of imp params in funcmod > # of imp params in mod 001186
> GET_ORA_SYS_TABLE_V_NLS_PARAM : inconsistency in # of imp params found for mod 001186
> GET_ORA_SYS_TABLE_DBA_REGISTRY : # of imp params in funcmod > # of imp params in mod 001200
> GET_ORA_SYS_TABLE_DBA_REGISTRY : inconsistency in # of imp params found for mod 001200
> GET_ORA_SYS_TABLE_DBA_SEQUENCE : # of imp params in funcmod > # of imp params in mod 000095
> GET_ORA_SYS_TABLE_DBA_SEQUENCE : inconsistency in # of imp params found for mod 000095
> GET_ORA_SYS_TABLE_DBA_SCHED : # of imp params in funcmod > # of imp params in mod 000093
> GET_ORA_SYS_TABLE_DBA_SCHED : inconsistency in # of imp params found for mod 000093
GET_DB_ORA_TAB_GROWTH_BW : no matching interface found
GET_DB_ORA_V_SQL_INFO2 : no matching interface found
GET_ORA_SYS_TABLE_V_SPPARA : no matching interface found
STUO_GET_WAIT_EVENTS : no matching interface found
STUO_GET_ORA_SYS_TABLE/V$DATAB : no matching interface found
STUO_GET_ENVIRONMENT : no matching interface found
GET_ORA_SYS_TABLE_V_STATNAME : no matching interface found
GET_ORA_SYS_TABLE_V_SESSTAT : no matching interface found
GET_ORA_SYS_TABLE_V_ROLLSTAT : no matching interface found
GET_ORA_SYS_TABLE_V_PROCESS : no matching interface found
GET_ORA_SYS_TABLE_V_PARAMETER : no matching interface found
GET_ORA_SYS_TABLE_V_LOGHIST : no matching interface found
GET_ORA_SYS_TABLE_V_LOGFILE : no matching interface found
GET_ORA_SYS_TABLE_V_LOG : no matching interface found
GET_ORA_SYS_TABLE_V_LATCH : no matching interface found
GET_ORA_SYS_TABLE_V_DATABASE : no matching interface found
GET_ORA_SYS_TABLE_V_ARCHIVELOG : no matching interface found
GET_ORA_SYS_TABLE_DBA_USERS : no matching interface found
GET_ORA_SYS_TABLE_DBA_TBLSPACE : no matching interface found
GET_ORA_SYS_TABLE_DBA_DATA_FIL : no matching interface found
GET_DB_ORA_TABLES_GROWTH : no matching interface found
GET_DB16_INFO : no matching interface found
GET_DB14_INFO : no matching interface found
GET_DB12_INFO : no matching interface found
DB_ORA_MISSING_INDICES : no matching interface found
DB_ORA_MAIN_LIST : no matching interface found
DB_ORA_GET_RELEASE : no matching interface found
DB_ORA_FILESYSTEM_REQUESTS : no matching interface found
DB_ORA_EXTENTS : no matching interface found
DB_ORA_CURRENT_SIZES : no matching interface found
DB_ORA_CRIT_OBJ___FREESPC_STAT : no matching interface found
PROFILE_FROM_PAHI/D : no matching interface found
Do you have any idea why these warnings.
Please help us to get rid of this issue.
Regards,
Sanjai

Help needed with missing data problem in CRVS2010

We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.

Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM

Not find EWA Session in the managed system

Hi all,
I am configuring SOL 7.1 for EWA.
I have configured SDCCN both on Solution manager 7.1 and Managed System.
In the solution manager, i can find EWA session for managed system.
The question is : When i run "Refresh sessions" on the T-code: SDCCN of Managed system, it can not retrive EWA session where exist on the Solution manager.
How do i do? Can someone help, please.
BR
Wu

after reconfiguration in new client,
Follow Note 727998 - Complete Replacement of Service Definitions for SDCC/SDCCN
step 1 :
in the solution manager:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that connection 'NONE' and SDCC_OSS is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
step 2:
in the managed system:
1.1 run report BDL_DELETE_ALL_TABLES in SE38
1.2 SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
       Ensure that only connection SM_<SOL>_BACK' (delete SDCC_OSS )is maintained, and that the 'master'
1.3 Execute a "service definition refresh" in SDCCN
1.4 Delete any task 'Maintenance Package' in the 'To do' tab in SDCCN.
1.5 Create a new periodic task 'Maintenance Package' in SDCCN
1.6 Call function module /BDL/_GENERATE_LOGFUNCINCLUDES in SE37
        Assign the value 'ALL' to the import parameter 'OPTION' (keep the default values for all other parameters) and execute the module.
1.7 Execute "refresh session" in SDCCN
Best Regards,
Wu

Insert old missing data from one table to another(databaase trigger)

Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT       NUMBER(2);
V_TIME_OUT    DATE;
V_DATE_IN     DATE;
V_DATE_OUT    DATE;
V_TIME_IN     DATE;
V_ATT_FLAG    VARCHAR2(3);
V_EMP_ID      NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT   EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM     ACCESSLOG
WHERE    LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND      TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID    = EMP.EMPLOYEEID
AND    DATE_IN   = EMP.LOGDATE
AND    ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
                            ,TIME_IN ,TIME_OUT,ATT_FLAG)
     VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
             TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'),       -- DATE_IN
             NULL,
             TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'),      -- TIME_IN
             NULL ,'I');
ELSIF   V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
    SET DATE_OUT       = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
        TIME_OUT       =   TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
        ATT_FLAG       =   'O'
        WHERE EMP_ID   =   TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
        AND   DATE_IN <= (SELECT MAX (DATE_IN )
                           FROM EMP_ATTENDANCEE
                           WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
                           AND   DATE_OUT IS NULL
                           AND   TIME_OUT IS NULL )
AND   DATE_OUT IS NULL
AND   TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
                        Regards,
Abdetu..

INSERT INTO SALES_MASTER
   ( NO
   , Name
   , PINCODE )
   SELECT SALESMANNO
        , SALESMANNAME
        , PINCODE
     FROM SALESMAN_MASTER;Regards,
Christian Balz

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

Missing Data from Legacy System

Hello All,
My client went live end of January this year. They had a month of transaction data in their legacy system which they did not bring into SAP. Since this is their first year on SAP and recently implemented Extended Withhold Tax one month data is missing; when they run the 1099s at the end of the year they are going to be reported incorrectly.
How can we bring over that missing data from legacy system over to SAP without having to clear those invoices in SAP?
Thank You In Advance

Hi Shashi,
Have a look : <a href="http://www.box.net/shared/9tda040za6">Transferring Data with DB Connect</a>
<a href="http://sapbwneelam.blogspot.com">More Docs...</a>
Hope it Helps
Srini

How can I connect dots across missing data points in a line chart?

Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1              Column 2      Column 3
Aug 16, 2011         87.1             15.4
Aug 17, 2011         86.6
Aug 18, 2011         86.1
Aug 19, 2011
Aug 20, 2011         85.7             14.6
Aug 21, 2011         85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!

Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

HT201269 Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone?

SMS Transferring/downloading/backup : Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone? Here is my dilemma. My iPhone quit working and I couldn’t get it fixed as quickly as I needed to. I bought a used iPhone and started using it normally and downloaded the backup from itunes/icloud. There was a large gap in data where the first iPhone didn’t backup when I thought it had. I have SMS data on both phonesnow and I need them for a court hearing. I have since had the other iPhone repaired and working perfectly. Will downloading a backup wipe out the newer SMS data? I am nervous because I can’t lose the information or my case mey be compromised. Any “Real Help” including programs that work to accomplish this would be very helpful. Thank You in advance…

No, direct access to manipulating the phone's filesystem is not permitted for 3rd party apps in the iOS. It can't be done without hacking the phone, which you certainly don't want to do. The messages can be combined and viewed on your computer, but not on a single phone.

Missing data in EWA session

Similar Messages

Maybe you are looking for