Missing file Sample/i18n.xml
File Sample/i18n.xml is missing in my instalation. Can anyone post the content of this file?
Thanks.
This goes in your ejb-jar.xml file
<assembly-descriptor>
<method-permission>
<description></description>
<role-name>yourRole</role-name>
<method>
<ejb-name>YourEJB</ejb-name>
<method-name>findByYourFinder</method-name>
</method>
</method-permission>
</assembly-descriptor>
"Kven" <[email protected]> wrote in message
news:[email protected]..
Hello
Can anyone provide a sample web.xml file with "security-constraint" tag
included in it.
I have the RDBMS Realm set up and it seems to be working fine with
servlets. I need to test with EJBs, dont know how to proceed.
Any help is appretiated.
Thanks
K
Similar Messages
-
MyRIO analog input express Vi (n samples) missing file
Dear Users,
I am trying to read analog data with an express VI in myRIO. This works with Analog input (1 sample), but fails with Analog input (n samples) due a missing file "myRIO v1.1 FPGA Throughput.lvbitx".
I googled it and searched it on ni.com, but nobody seems to have the same isssue (I suppose because of the myRIO is quite new right now)
Thank you!
Solved!
Go to Solution.I would try doing a repair of your installation. It looks like something didn't get installed properly.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Hello
Can anyone provide a sample web.xml file with "security-constraint" tag
included in it.
I have the RDBMS Realm set up and it seems to be working fine with
servlets. I need to test with EJBs, dont know how to proceed.
Any help is appretiated.
Thanks
KThis goes in your ejb-jar.xml file
<assembly-descriptor>
<method-permission>
<description></description>
<role-name>yourRole</role-name>
<method>
<ejb-name>YourEJB</ejb-name>
<method-name>findByYourFinder</method-name>
</method>
</method-permission>
</assembly-descriptor>
"Kven" <[email protected]> wrote in message
news:[email protected]..
Hello
Can anyone provide a sample web.xml file with "security-constraint" tag
included in it.
I have the RDBMS Realm set up and it seems to be working fine with
servlets. I need to test with EJBs, dont know how to proceed.
Any help is appretiated.
Thanks
K -
Collections Missing Files - Is there a way to fix them all at once?
Hello,
Due to new computer, all files has been moved to a new location.
Obviously, the collections I have can't find them now and reporting "Missing Files".
Now, I need to fix them by finding them folder by folder, and since the collections contains items from many folders, It will take hours to fix them all so I wondered if there is a way to tell Bridge about the new location of the files all at once.
I hope I managed to explain what I'm looking for.
Thank you,
shlomitWhich OS? If on Windows you can find your Bridge collections list at (win 7 bridge cs6 example):
C:\Users\user-name\AppData\Roaming\Adobe\Bridge CS6\Collections
The files in Collections folder are .filelist - text xml format. You could copy filelists from the old system's Collections folder to the Bridge AppData Collections folder in your new system so long as all the referenced files listed in the collection filelists are in the same disks and folders on your new system. -
XSLT samples for XML- ABAP mapping
Hi all,
Does anyone have a XSLT samples for XML->ABAP mapping ?
regardsfirst create XSLT program by copy pasting the below given code and give the program name as "Y_TEST"
<b>XSLT code</b>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:output indent="yes"/>
<xsl:template match="NewDataSet">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<OUTTAB>
<xsl:for-each select="Table">
<OUTTAB1>
<AIRPORTCODE>
<xsl:value-of select="AirportCode"/>
</AIRPORTCODE>
<CITYOFAIRPORTNAME>
<xsl:value-of select="CityOrAirportName"/>
</CITYOFAIRPORTNAME>
<COUNTRY>
<xsl:value-of select="Country"/>
</COUNTRY>
<COUNTRYABBRIVATION>
<xsl:value-of select="CountryAbbrviation"/>
</COUNTRYABBRIVATION>
<COUNTRYCODE>
<xsl:value-of select="CountryCode"/>
</COUNTRYCODE>
<GMTOFFSET>
<xsl:value-of select="GMTOffset"/>
</GMTOFFSET>
<RUNWAYLENGTHFEET>
<xsl:value-of select="RunwayLengthFeet"/>
</RUNWAYLENGTHFEET>
<RUNWAYELEVATIONFEET>
<xsl:value-of select="RunwayElevationFeet"/>
</RUNWAYELEVATIONFEET>
<LATITUDEDEGREE>
<xsl:value-of select="LatitudeDegree"/>
</LATITUDEDEGREE>
<LATITUDEMINUTE>
<xsl:value-of select="LatitudeMinute"/>
</LATITUDEMINUTE>
<LATITUDESECOND>
<xsl:value-of select="LatitudeSecond"/>
</LATITUDESECOND>
<LATITUDENPEERS>
<xsl:value-of select="LatitudeNpeerS"/>
</LATITUDENPEERS>
<LONGITUDEDEGREE>
<xsl:value-of select="LongitudeDegree"/>
</LONGITUDEDEGREE>
<LONGITUDEMINUTE>
<xsl:value-of select="LongitudeMinute"/>
</LONGITUDEMINUTE>
<LONGITUDESECONDS>
<xsl:value-of select="LongitudeSeconds"/>
</LONGITUDESECONDS>
<LONGITUDEEPERW>
<xsl:value-of select="LongitudeEperW"/>
</LONGITUDEEPERW>
</OUTTAB1>
</xsl:for-each>
</OUTTAB>
</asx:values>
</asx:abap>
</xsl:template>
</xsl:stylesheet>
<b>just create a type 1 program and paste the below given code.</b>
report y_consume_webservice .
data: wf_user type string .
data: wf_password type string .
types: begin of outtab1 ,
airportcode(6) ,
cityofairportname(50),
country(30) ,
countryabbrivation(10),
countrycode(6) ,
gmtoffset(10) ,
runwaylengthfeet(15),
runwayelevationfeet(15),
latitudedegree(10) ,
latitudeminute(10) ,
latitudesecond(10) ,
latitudenpeers(10) ,
longitudedegree(10) ,
longitudeminute(10) ,
longitudeseconds(10) ,
longitudeeperw(10) ,
end of outtab1 .
data: outtab type table of outtab1.
data: wf_o like line of outtab .
data: g_okcode like sy-ucomm .
data: my_container type ref to cl_gui_custom_container .
data: g_dock type ref to cl_gui_docking_container .
data: mygrid type ref to cl_gui_alv_grid .
data: wf_field_cat type lvc_t_fcat .
data: wf_field_cat_wa like line of wf_field_cat ,
wf_is_layout type lvc_s_layo .
data: wf_fld_cat type slis_t_fieldcat_alv .
data: wf_fld_cat_wa like line of wf_fld_cat .
data: wf_repid like sy-repid .
data: int_tab_name type slis_tabname .
data: xslt_err type ref to cx_xslt_exception .
constants:
* encoding for download of XML files
encoding type string value 'utf-8' .
data: rlength type i,
txlen type string .
data: http_client type ref to if_http_client .
data: wf_string type string .
data: wf_string1 type string .
data: wf_proxy type string ,
wf_port type string .
selection-screen: begin of block a with frame .
parameters: uri2(132) type c lower case .
selection-screen skip 1.
parameters: user(50) lower case,
password(50) lower case ,
p_proxy(100) lower case default 'proxy.xxx.com' ,
p_port(4) default '80'.
selection-screen: end of block a .
at selection-screen output.
loop at screen.
if screen-name = 'PASSWORD'.
screen-invisible = '1'.
modify screen.
endif.
endloop.
start-of-selection .
clear wf_string .
concatenate
'<?xml version="1.0" encoding="utf-8"?>'
'<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
'<soap:Body>'
'<GetAirportInformationByCountry xmlns="http://www.webserviceX.NET">'
'<country>' uri2 '</country>'
'</GetAirportInformationByCountry>'
'</soap:Body>'
'</soap:Envelope>'
into wf_string .
clear :rlength , txlen .
rlength = strlen( wf_string ) .
move: rlength to txlen .
clear: wf_proxy, wf_port .
move: p_proxy to wf_proxy ,
p_port to wf_port .
call method cl_http_client=>create
exporting
host = 'www.webservicex.net'
service = '80'
scheme = '1'
proxy_host = wf_proxy
proxy_service = wf_port
importing
client = http_client.
http_client->propertytype_logon_popup = http_client->co_disabled.
wf_user = user .
wf_password = password .
call method http_client->authenticate
exporting
proxy_authentication = 'X'
username = wf_user
password = wf_password.
call method http_client->request->set_header_field
exporting
name = '~request_method'
value = 'POST'.
call method http_client->request->set_header_field
exporting
name = '~server_protocol'
value = 'HTTP/1.1'.
call method http_client->request->set_header_field
exporting
name = '~request_uri'
value = '/airport.asmx'.
call method http_client->request->set_header_field
exporting
name = 'Content-Type'
value = 'text/xml; charset=utf-8'.
call method http_client->request->set_header_field
exporting
name = 'Content-Length'
value = txlen.
call method http_client->request->set_header_field
exporting
name = 'SOAPAction'
value = 'http://www.webserviceX.NET/GetAirportInformationByCountry'.
call method http_client->request->set_cdata
exporting
data = wf_string
offset = 0
length = rlength.
call method http_client->send
exceptions
http_communication_failure = 1
http_invalid_state = 2.
call method http_client->receive
exceptions
http_communication_failure = 1
http_invalid_state = 2
http_processing_failed = 3.
clear wf_string1 .
wf_string1 = http_client->response->get_cdata( ).
replace all occurrences of
'<' in wf_string1 with '<' .
replace all occurrences of
'>' in wf_string1 with '>' .
replace all occurrences of
'xmlns=' in wf_string1 with 'xmlns:xsl=' .
try .
call transformation (`Y_TEST`)
source xml wf_string1
result outtab = outtab.
catch cx_xslt_exception into xslt_err.
data: s type string.
s = xslt_err->get_text( ).
write: ': ', s.
stop.
endtry .
break-point .
Try this and give me your feedback.
Regards
Raja -
ERROR :Conversion of file content to XML failed at position 0
Hi Frnds,
I have a File to File scenario, while testing I am getting the following error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'TA_830':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Can any one please tell me why Iam getting this error even I have provided the following informantion in channel configuration. Here TA_830 is the record name.
TA_830.processFieldNames fromConfiguration
TA_830.fieldNames SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,REF_NUM,PAYER_ACC,VAL_DATE,ISO_CURRENCY,AMOUNT,RESV_11,SEG_NUM,EXCHG_RATE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_18,SEG_NUM,BANK_ID,BANK_CODE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_5,SEG_NUM,ACCOUNT,ADDR1,ADDR2,ADDR3,ADDR4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,TOTAL_AMOUNT,RESV_59
TA_830.fieldFixedLengths 2,6,12,5,6,7,5,5,3,1,1,16,24,6,3,15,11,2,12,24,24,24,24,18,2,1,24,24,24,24,24,5,2,24,24,24,24,24,6,2,30,30,30,30,6,2,30,30,30,30,6,2,6,12,5,6,7,5,5,3,1,1,16,59
TA_830.fieldContentFormatting nothing
Regards,
Shiva.Hi,
As you are using Fixed Length File...use below specified parameters:
TA_830.fieldName: Names of Fields in teh File
TA_830.fieldFixedLegths: Lenghts as per your file
TA_830.keyFieldValue: If you use any value as key
TA_830.lastFieldsOptional: YES
TA_830.endSeparator : 'nl'
This will help you out..
Thanks,
Kishore. -
How to convert the TEXT file into an XML using plsql code
Hi all ,
I need to convert an TEXT file into an XML file how can i do it
Below is my sample TEXT file .
TDETL00000000020000000000000120131021115854ST2225SKU77598059 0023-000000010000
I want the above to be converted into the below format
<?xml version="1.0" encoding="UTF-8"?>
<txt2xml>
<!-- Processor splits text into lines -->
<processor type="RegexDelimited">
<regex>\n</regex>
<!--
This is used to specify that a message should be created per line in
the incoming file;
NOTE: this was designed to work with all the processors, however it
only works correctly with 'RegexDelimited' processors (check the
enclosing top processor type)
-->
<maxIterationsPerMsg>1</maxIterationsPerMsg>
<!-- For lines beginning with FHEAD (File Header) -->
<processor type="RegexMatch">
<element>FHEAD</element>
<regex>^FHEAD(.*)</regex>
<processor type="RegexMatch">
<element>OriginalLine</element>
<regex>(.*)</regex>
<consumeMatchedChars>false</consumeMatchedChars>
</processor>
<processor type="RegexMatch">
<element>LineSeq,Type,Date</element>
<regex>^(\d{10})(\w{4})(\d{14})$</regex>
</processor>
</processor>
<!-- For lines beginning with TDETL (Transaction Details) -->
<processor type="RegexMatch">
<element>TDETL</element>
<regex>^TDETL(.*)</regex>
<processor type="RegexMatch">
<element>OriginalLine</element>
<regex>(.*)</regex>
<consumeMatchedChars>false</consumeMatchedChars>
</processor>
<processor type="RegexMatch">
<element>LineSeq,TransControlNumber,TransDate,LocationType,Location,ItemType,Item,UPCSupplement,InventoryStatus,AdjustReason,AdjustSign,AdjustQty</element>
<regex>^(\d{10})(\d{14})(\d{14})(\w{2})(\d{4})(\w{3})([\w ]{13})([\w ]{5})(\d{2})(\d{2})([+-]{1})(\d{12})$</regex>
</processor>
</processor>
<!-- For lines beginning with FTAIL (File Tail) -->
<processor type="RegexMatch">
<element>FTAIL</element>
<regex>^FTAIL(.*)</regex>
<processor type="RegexMatch">
<element>OriginalLine</element>
<regex>(.*)</regex>
<consumeMatchedChars>false</consumeMatchedChars>
</processor>
<processor type="RegexMatch">
<element>LineSeq,TransCount</element>
<regex>^(\d{10})(\d{6})$</regex>
</processor>
</processor>
</processor>
</txt2xml>
ThanksSorry, that doesn't make much sense.
The XML you gave is a configuration file for txt2xml utility. It doesn't represent the output format.
Are you a user of this utility? -
when i started my cityville from facebook the loading progress stopped at 73%.. when it stop i need to download file en-US.xml and gameSettings.xml
this is the download URL for gameSettings.xml : http://cityvillefb.static.zgncdn.com/54988/gameSettings.xml.z
and this is the download URL for en-US.xml :
http://cityvillefb.static.zgncdn.com/54988/en_US.xml.z
when i used version 5.0.1 i never met any problem like this..!!
and i already use adobe flash player higher than version 10
so how can i fix this problem..??Hi Scott,
in SDIXML_DATA_TO_DOM you can only pass the name of root node, so you can not assign attribute xmlns to root node (<Data xmlns="ServiceNet">) ... unless you build the xml document from scratch (without SDIXML_DATA_TO_DOM)
when using your sample code (without sale) I get xml without <item>
SDIXML_DATA_TO_DOM => SDIXML_DOM_TO_SCREEN::
<?xml version="1.0" encoding="utf-8" ?>
- <Data>
<LV_XMINS>xmlns="DUMMY FIELD</LV_XMINS>
<BATCHDATETIME>2009-11-13T12:05:58</BATCHDATETIME>
</Data>
regards, Karsten -
NewBie : How can I do to compile the samples of XML Parser ?
How can I do to compile the samples of XML Parser ?
I must create a Makefile file, and after ?
ThanksIt`s for the Parser C++.
thanks -
"Missing files" NOT actually missing
I had some drive problems that during play and syncing made iTunes mark many of my files "missing". With the working drive, these tracks are not actually missing - double-clicking on each one will refresh its view. The problem is that iTunes seems satisfied with its 'missing' status for each, such that 'next track' and ipod-syncing assume those files don't need to be checked again.
In other words, despite no real problems with file access, I can only get iTunes to refresh its view of those missing tracks by double-clicking each one, which is completely unworkable, given the thousands it thinks are missing.
I've seen other variants of missing file problems but not this. Can I get iTunes to refresh its view of those files? The file locations *have not changed*
I'm pretty sure this is new behavior, previous builds seemed happy to check a file anew if asked in any way (e.g. 'next').
Windows 2000This is exactly my problem as well. The MP3's are still in the same location with the same names, and I can't deduce why it's only about 40% of the total files unlinked.
This is the second time I've had to repair my Library, and nothing in iTunes makes that easy. If I delete everything it resets my ratings and counts, which is precisely what I want to avoid. If I re-import the music, I end up with duplicate files with extra numbers.
I did the whole ITL/XML refresh in the support section, then it gives me this "missing" headache. iTunes already knows which Artist folder to start looking in for each song... strcmp() anyone???
In my security efforts I have disabled my system from launching any script files with double-click, so while I would be happy to try Otto's JavaScript method... It shouldn't be too much to ask the iTunes team for a "Resolve Missing Files" button.
Even kinder would be the ability to make the iPod the master list, and have iTunes be on the receiving end of the sync. But I can see the i's rolling when that comes to purchased content.
It's wonderful when things work. -
Missing files after moving itunes music folder
i moved my itunes music folder to my external hard drive using the directions posted here: http://docs.info.apple.com/article.html?artnum=301748 to the letter. a lot of things transfered but now when i look in my itunes music folder and compare to my itunes library, i see that a lot of things are missing. i really don't want to have to go through every single artist folder and check every song. shouldn't consolidating my library have taken care of this?
I just had a very similar issue, I moved my iTunes library from a 120Gb Drive to a 500Gb and the library was a bit corrupted because the main drive was full b/c of an error, but that's besides the fact.
SOLUTION To missing files, that aren't really missing because they exist and were all copied no problems.
go to the iTunes folder in your Home folder, and move the iTunes Music Library.xml file to your desktop (with itunes closed of course)
Then re-open itunes and the library file that's not an xml doc, will re-search your files and all should be well.
You should be able to safely delete the xml doc now, because iTunes made a new one.
Cheers
PowerMac G4 Dual 1Gz Mac OS X (10.4.9) -
Hi all,
From https://www.simple-talk.com/content/print.aspx?article=1756, I mimicked to create the following sql code to do Importing XML data using a CTE:
---Importing XML data using a CTE -----Ad-Hoc XML File Query--simple-talk---1020AM 27 Feb 2015
---query the XML Blob using a CTE (pulling from the XML file each time
USE OPENXMLtesting1
GO
With XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'C:\XML FilesMicrosoft-Samples\books.xml', SINGLE BLOB) AS XmlData
SELECT
FROM XmlFile
GO
I got the following message:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'BLOB'.
I have no ideas why it is incorrect in that code statment. Please kindly help, advise and respond.
Thanks in advance,
Scott Chang
P. S. The books.xml file was copied from the Microsoft samples:
<?xml version="1.0"?>
<catalog>
<book id="bk101">
<author>Gambardella, Matthew</author>
<title>XML Developer's Guide</title>
<genre>Computer</genre>
<price>44.95</price>
<publish_date>2000-10-01</publish_date>
<description>An in-depth look at creating applications
with XML.</description>
</book>
<book id="bk102">
<author>Ralls, Kim</author>
<title>Midnight Rain</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2000-12-16</publish_date>
<description>A former architect battles corporate zombies,
an evil sorceress, and her own childhood to become queen
of the world.</description>
</book>
<book id="bk103">
<author>Corets, Eva</author>
<title>Maeve Ascendant</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2000-11-17</publish_date>
<description>After the collapse of a nanotechnology
society in England, the young survivors lay the
foundation for a new society.</description>
</book>
<book id="bk104">
<author>Corets, Eva</author>
<title>Oberon's Legacy</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2001-03-10</publish_date>
<description>In post-apocalypse England, the mysterious
agent known only as Oberon helps to create a new life
for the inhabitants of London. Sequel to Maeve
Ascendant.</description>
</book>
<book id="bk105">
<author>Corets, Eva</author>
<title>The Sundered Grail</title>
<genre>Fantasy</genre>
<price>5.95</price>
<publish_date>2001-09-10</publish_date>
<description>The two daughters of Maeve, half-sisters,
battle one another for control of England. Sequel to
Oberon's Legacy.</description>
</book>
<book id="bk106">
<author>Randall, Cynthia</author>
<title>Lover Birds</title>
<genre>Romance</genre>
<price>4.95</price>
<publish_date>2000-09-02</publish_date>
<description>When Carla meets Paul at an ornithology
conference, tempers fly as feathers get ruffled.</description>
</book>
<book id="bk107">
<author>Thurman, Paula</author>
<title>Splish Splash</title>
<genre>Romance</genre>
<price>4.95</price>
<publish_date>2000-11-02</publish_date>
<description>A deep sea diver finds true love twenty
thousand leagues beneath the sea.</description>
</book>
<book id="bk108">
<author>Knorr, Stefan</author>
<title>Creepy Crawlies</title>
<genre>Horror</genre>
<price>4.95</price>
<publish_date>2000-12-06</publish_date>
<description>An anthology of horror stories about roaches,
centipedes, scorpions and other insects.</description>
</book>
<book id="bk109">
<author>Kress, Peter</author>
<title>Paradox Lost</title>
<genre>Science Fiction</genre>
<price>6.95</price>
<publish_date>2000-11-02</publish_date>
<description>After an inadvertant trip through a Heisenberg
Uncertainty Device, James Salway discovers the problems
of being quantum.</description>
</book>
<book id="bk110">
<author>O'Brien, Tim</author>
<title>Microsoft .NET: The Programming Bible</title>
<genre>Computer</genre>
<price>36.95</price>
<publish_date>2000-12-09</publish_date>
<description>Microsoft's .NET initiative is explored in
detail in this deep programmer's reference.</description>
</book>
<book id="bk111">
<author>O'Brien, Tim</author>
<title>MSXML3: A Comprehensive Guide</title>
<genre>Computer</genre>
<price>36.95</price>
<publish_date>2000-12-01</publish_date>
<description>The Microsoft MSXML3 parser is covered in
detail, with attention to XML DOM interfaces, XSLT processing,
SAX and more.</description>
</book>
<book id="bk112">
<author>Galos, Mike</author>
<title>Visual Studio 7: A Comprehensive Guide</title>
<genre>Computer</genre>
<price>49.95</price>
<publish_date>2001-04-16</publish_date>
<description>Microsoft Visual Studio 7 is explored in depth,
looking at how Visual Basic, Visual C++, C#, and ASP+ are
integrated into a comprehensive development
environment.</description>
</book>
</catalog>I found the mistakes I made and I corrected them. The newly revised/corrected code is:
USE OPENXMLtesting1
GO
With XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'C:\Temp\books.xml', SINGLE_BLOB) AS XmlData
SELECT *
FROM XmlFile
GO
It worked: Results
Contents
1 <catalog><book.id="bk101"><author>Gambardella.M...
If I clicked on this, I got a listing of the whole book.xml!! I don't know what it means. Please comment and respond.
Thanks,
Scott Chang -
[svn:osmf:] 14059: Adding missing file.
Revision: 14059
Revision: 14059
Author: [email protected]
Date: 2010-02-09 06:38:45 -0800 (Tue, 09 Feb 2010)
Log Message:
Adding missing file.
Added Paths:
osmf/trunk/apps/samples/framework/LayoutSample/src/LayoutSample2.asMany thanks for the fast reply.
I've got a follow up question.
What will happen if I modify the reconnect Code in the OSMF Netloader Class as recommended and then load multiple third party OSMF plugins,
which may have included the origin OSMF version of the Netloader class.
Which one will be used at runtime?
Thanks in advance! -
One File Adapter, many xml types
Hi,
I have to use file sender adapter to read files from a directory. The files are in XML format. Each file has a different XML structure and I can not distinguish by the name file the type of XML that goes into the file. How can I do that ?.
Thanks.
Best regardsHi Francisco,
hopefully you solved the issue already, but maybe someone else has the same issue.
I just faced the same challenge.
In my scenario the all message types have the same receiver but different inbound interfaces and mappings should be used.
I solved it by checking the root element with a xpath content based routing in the interface determination.
It's important that you register the different namespaces used by the message types and then just insert the root element name and as compare operation select EX
In my sample I have to deal with two message types which use different namespaces.
message type1 eCH-0020:delivery xmlns:eCH-0020="http://www.ech.ch/xmlns/eCH-0020/2"
message type2 eCH-0078:eventReport xmlns:eCH-0078="http://www.ech.ch/xmlns/eCH-0078/2"
Therfore I inserted both namespaces in the table of the expression editor
prefix eCH-0020 namespace http://www.ech.ch/xmlns/eCH-0020/2
prefix eCH-0078 namespace http://www.ech.ch/xmlns/eCH-0078/
the value of the prefix is up to you, I decided to use descriptive namespaces
and then insert follwing XPATH expressions
/eCH-0078:eventReport EX
/eCH-0020:delivery EX
that's it
hope this helps.
Best regards,
Jochen -
EDIReceive Pipeline split 820 file, produce invalid xml output
I am using BizTalk 2013. X12_00501_820 schema comes from biztalk in-box schema with a tiny little change to add annotations such as
subdocument_creation_break="yes" to enable spliting.
For my testing, I applied subdocument_creation_break in loop 2000A and 2000B
The biztalk do consume the 820 file and split the file. the problem is the file it split is not a valid xml. a ">" is missing in the output xml, making whole xml invalid
The error happen in ENT_SubLoop element
output xml in this part looks like that:
<ns0:ENT_SubLoop<ns0:TS820_2000B_Loop xmlns:ns0="http://schemas.microsoft.com/BizTalk/EDI/X12/2006">
The ">" for ENT_SubLoop is missing.I am experiencing a nearly identical problem, only I am using BizTalk 2010:
<ns0:ENT_SubLoop<ns0:TS820_2000B_Loop_Loop<ns0:TS820_2000B_Loop xmlns:ns0="http://schemas.microsoft.com/BizTalk/EDI/X12/2006">
The ">" for ENT_SubLoop is missing from the generated XML.
I applied the subdocument_creation_break as follows:
- <xs:element name="TS820_2000B_Loop">
- <xs:annotation> <xs:documentation>Loop for Individual Remittance</xs:documentation>
- <xs:appinfo>
<b:recordInfo
structure="delimited" field_order="infix"
delimiter_type="inherit_record" subdocument_creation_break="yes"
count_ignore="yes" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" trigger_field="ENT_IndividualRemittance/ENT02_EntityIdentifierCode"
trigger_value="2J" />
</xs:appinfo>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element
minOccurs="1" maxOccurs="1" ref="ENT_IndividualRemittance"
/>
<xs:element
minOccurs="0" maxOccurs="unbounded" ref="TS820_2100B_Loop"
/>
<xs:element
minOccurs="0" maxOccurs="unbounded" ref="TS820_2200B_Loop"
/>
<xs:element
minOccurs="1" maxOccurs="unbounded" ref="TS820_2300B_Loop"
/>
</xs:sequence>
</xs:complexType>
</xs:element>
This appears to be a problem with the EDI disassembler.
Has anyone else experienced this? Any known fix or easy workaround?
Maybe you are looking for
-
KE 30 Profitability Report not picking cost of raw, packing and overheads
We are facing some problem in KE 30 report (profitability report). Cost of some sales orders are not appearing in profitability report and it shows 100% GP for that sales order. If any one knows the reason please let me know.
-
Changed the headphone jack in my iPod and now it shows the sad face
It also shows the please wait very low battery message
-
Authorization issue while using business content objects
Hi all, I am getting an authorization error while loading from DSO to Cube (for standard business content objects only). Even i am not able access the data in Bex reports from Standard cubes or DSO. The user is assigned to SAP_ALL . But there is no s
-
Host in network is not reachable over WPA2-Enterprise encryption
hello together, i'm running a WRVS4400N router with parallel WPA2-Enterprise and WPA2-Personal wireless networking. If I try to ping a host on the network I get two different results: The ping over the WPA2-Personal network is working pretty well. Ov
-
Hi! My question is about tax codes applied to exports. For foreign customers my client does not apply any tax because they are exempt. So the tax code to apply should not generate any accounting posting at the time of billing. Which tax code should I