Missing Form defination 'cs_set_new_' under include MV45AI0K_KUNDEN_PRUEFEN

Hi All,
We are doing the up gradation work to ECC600.
While running the T-code 'VA01' transaction its going short dump because of missing the form definition 'cs_set_new_kuagv_kunnr' under the include MV45AI0K_KUNDEN_PRUEFEN.
What we observed is one ECC server include having the some Extra code which i givne below along with existing code and the following code under the include MV45AI0K_KUNDEN_PRUEFEN.
Check SC switch is on
  IF CL_SD_SWITCH_CHECK=>SD_SFWS_UI3_O2C( ) EQ abap_true.
replace current customer (sold-to-party) by customer form full text search
    PERFORM cs_set_new_kuagv_kunnr.
  ENDIF.
In the above one form definition is missed so that its showing an syntax error which its giving the short dump for VA01.
But we checked in the other server which is same as ECC600 but there is no above extra code under this include and VA01 working fine.
Kindly check and provide any solution available.
Regards,
Vijay Krishna.C

Hi Vijay,
            we are also facing same problem, could you please tell me how did you solve this issue?
THANKS
BHUWAN TIWARI

Similar Messages

  • CSS giving different results when defined locally, and when defined using an include file.

    In my experimental photo album page I originally defined the
    styles in a
    separate .CSS file. However this appeared to be incompatible
    with the
    requirement to have the session_start (); statement at the
    start of the file, so
    I then defined the styles locally. Now I have found that a
    style which gives
    padding to the right of an image no longer works in IE6,
    although Dreamweaver
    shows the expected result.
    I have made two very simple test files to demonstrate this:
    http://localhost/Corybas/Cydalba/Test/Test_page_8[1
    http://localhost/Corybas/Cydalba/Test/Test_page_8[2
    In Test_page_8[1].htm styles are defined by the include file
    ../Spl2.ccs, which
    is included using the following statement in the head:
    <link href="../Spl2.css" rel="stylesheet" type="text/css"
    />
    The include file reads:
    /* Test.css for Cydalba project */
    .img_left { float:left; border:none; padding-left:0;
    padding-bottom:0;
    padding-top:0; padding-right:10px; }
    p { font-family: "Times New Roman", Times, serif; color:
    #f00000;
    margin-bottom: 0.25em; margin-top: 0px; border: 0; }
    In Test_page_8[2].htm styles are defined locally, using the
    following lines at
    the start of file:
    <style type="text/css">
    /* Test.css for Cydalba project */
    .img_left { float:left; border:none; padding-left:0;
    padding-bottom:0;
    padding-top:0; padding-right:10px; }
    p { font-family: "Times New Roman", Times, serif; color:
    #f00000;
    margin-bottom: 0.25em; margin-top: 0px; border: 0; }
    </style>
    With IE6 Test_page_8[1] gives the expected padding between
    the images and the
    adjacent text, but Test_page_8[2] does not. The para
    definition appears to work
    correctly in both cases.
    Can anyone explain this?
    Clancy

    Hi Rob,
    I am making a wild guess here...the reason could be that the internal tables or variables declared as part of Global data (if any) must be refreshed in your FM code.
    Regards,
    Sumant.

  • REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.

    Hi Experts,
    I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
    Please help me soon to resolve this issue.
    Thanks in advance.
    Shreyansh

    Hi
    Goto main function group include name attributes tab and double click.
    once the include is opened, try to activate it. if shows errors then fix.
    regards
    Shiva

  • Using variables defined in an include or another program

    Hi,
    i'm trying to use some declarations in my program which are defined in an include or another program.
    1. I need to create a class whose definition is in an include
    2. i need to declare a variable like this
        v_temp TYPE l_temp ,  l_temp is a structure defined in an include .
    I'm trying to use the declarations in another program or an include in  my program. however, i dont want to use 'include' statement
    your help would be appreciated.
    Thanks,
    Kranthi.

    Hi Kranti,
    If u write the declarationin some other include or program n use it in other program, without using INCLUDE.. how would the complier understand where the declaration has come from?? U need to specify to the compiler the path of declaration and hence the include is included..
    If u dont intend to use INCLUDE, declare a data element in ABAP dictionary and use it in ur program..
    I dont think its possible to do it the way u have suggested..
    BTW, why arent u in favour of using the INCLUDE.. is it because it has a lot of declarations..
    Regards,
    Tanveer.
    Please mark helpful answers

  • What is the purpose of User-Defined Functions under Excel Service Application?

    Hello, I have done a lot of research and have concluded that we cannot use VBA present under Excel sheet code in sharepoint.
    Today I was reading on excel services in sharepoint. I came across User-defined functions under Excel Service Application settings. I believe that User defined functions refer to the Calculations and VBA (am I wrong on this?).
    If true, then, does this bring hope that we can use embedded VBA code present into excel sheet in SharePoint also?

    Hi Nachiket,
    When you set  ‘Allow External Data’ to None, it disables all external data connections for the trusted file location.
    When you set  ‘Allow External Data’ to ‘Trusted data connection libraries and embedded’, it enables connections that are embedded in the workbook file or connections that are stored in a trusted data connection library.
    More information, please refer to the link:
    http://technet.microsoft.com/en-us/library/jj219699.aspx
    As your description, when you tried to set Allow External Data to None, the external data also was displayed, it may be caused by data cache or time delay.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Can the form attachment files be included in the notification e-mail?

    Can the form attachment files be included in the notification e-mail?
    Best regards

    Hi,
    Currently the attachment cannot be sent with email notifications in FormsCentral. You may submit feature request via http://forums.adobe.com/docs/DOC-4233.
    Thanks,
    Wenlan

  • We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC

    We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC
    Our users use a form template to create other adobe forms with calculated fields, signature fields (using digital signatures)
    , and buttons. Will we be able to continue developing these forms if we upgrade to Acrobat DC?

    Hi Alex ,
    In general ,you would not have any issues and problems moving to Acrobat DC .It has a different user interface and with more enhanced features .
    You would be able to develop the kind of forms you are referring to .
    You could refer to the following document to get more information about Acrobat DC .
    FAQ | Adobe Acrobat DC
    If in case you are referring to any particular issue or problem or if you face any regarding Acrobat DC ,we are always here to help you with that .
    Please feel free to write us back .
    Regards
    Sukrit Dhingra

  • Scrollbar is missing form Adobe Dropdown List.

    Hi,
    Scrollbar is missing form interactive Adobe Dropdown List. Same design is working in other system very well. What could be the reason?
    Thanks.
    Ali

    Hi Rali,
    I faced the same issue and posted two blogs on it. you may refer to the same.. I wont suggest it as handling too many records is not advisable in PDF forms.
    Here comes the importance of Markus's blog -> <a href="/people/markus.meisl/blog/2006/12/22/a-pdf-form-or-not-a-pdf-form--that-is-the-often-the-question">The blog most miss .</a>
    The basic question is - whats the need of a drop down with 4k entries. The users wont like to have a drop down of that sort. I would rather note the value down than to search for a single value, not to forget the size of the scroll bar. wat abt users prefering keys than a mouse pad??????.
    On top of it, this would greatly reduce your form performance.
    Hope this helps. i did the custom search help stuff, and it was preferred. Still the Form will need to refresh - which users wont prefer again.
    Hope we have a better standard search help soon :(.
    - anto.

  • BizTalk 2013 R2 Accelerator for HL7 is missing MSH_26_GLO_DEF.xsd file under templates

    BizTalk 2013 R2 Accelerator for HL7 is missing MSH_26_GLO_DEF.xsd file under templates. Can anyone please help me on this. 
    Is there a way to report this issue to Microsoft?

    Hi Sandeep,
    Thanks for your feedback in BizTalk forum.
    From your description above, I can hardly give precise troubleshooting for this issue, please give more explanation about what happens.
    >> Is there a way to report this issue to Microsoft?
    If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Please let me know if there is anything that I can do to help.
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Display tracks missing form your library

    Hi All!
    Is there an option in iTunes to display only tracks which are listed in your library but the actual file is missing form your disk? I know if I select a file that's not where its supposed to be it will let me know but I want to be able to say hay iTunes what's not there?
    Thanks!

    Lost & Found Playlists
    Create a playlist called Found, select everything in Music and drag it into the Found playlist (it may take some time to count the tracks that are to be dropped). Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist.
    If the missing files can be tracked down I have a tool that could help repair the broken links. Alternatively if you just want to remove them then in the Lost playlist use Ctrl+A followed by Shift+Delete.
    tt2

  • J2EE host or port not specified; define them under "System Settings"

    HI
    Iu2019m facing the issue with  SOAMANAGER
    In transaction  SOAMANAGER we configure the endpoints(service and binding)  for the provider
    and  try test with  Open Web Service navigator for selected binding  under overview tab
    Its Showing the Error:
    J2EE host or port not specified; define them under "System Settings"
    please help me to resolve this issue.
    Thanks
    Vadde

    Issue resolve
    trtransaction SOAMANAGER --> System Global settings -->Access J2EE server --> here we need to specify the Java host name and Port number
    Thanks
    Vadde

  • Missing Form

    I have a link to a form and I am getting responses from it, but when I go to my list of forms in Adobe Forms Central, I cannot find that particular form to update. Any ideas on where my missing form can be hiding?

    Weird. Later in the day I logged back in and it was back again. When I finished working on it yesterday afternoon I looked for a save feature and saw that it had been saved automatically.
    But today when I login its gone again and I have a prompt to "Create Your First Form". This is very, very frustrating.

  • Data is lost when form is completed under Firefox or Chrome

    I have an interactive pdf, created with Acrobat X Professional, with user rights extended so that form data can be saved using Reader.  The intent is for users to complete an online form in their browser and be able to save the data to their local disc.  This works under IE, Opera and Safari.  However, Firefox and Chrome appear to have default pdf viewers which do not recognize the Reader extension.  The pdf can be saved, but the form data is lost.  Is there a remedy for that?

    Until there is a better solution, I am using javascript to detect whether the user's browser has the Adobe Reader plugin enabled.  If not, a different version of the pdf is served, which does not tell the viewer that form data can be saved, and does not include other features which Chrome's pdf viewer can't accommodate.

  • Missing user-defined fields (project definition) in project inform. system

    Dear PS friends,
    I have extended the CI_PROJ structure with some user-defined fields.
    I have started report RCNCT001 (to analyze these new fields in the project information system). The include RCNPROJR was generated and contains the new fields (table XXL_DATA). Include RCNSOM00 was generated too. This is described in note 43493.
    But Iu2019m still missing the new user-defined fields in the dynamic selection of reports (e.g. CN40).
    What else I have to do? We use SAP_APPL : SAPKH60009
    Thanks in advance for any suggestions!

    have you used user defined field or custom field via exit CNEX......
    User defined fields are activated by configuration using field key
    If you added custom fields then check out OSS note 188663 on how to create a CUS view for dynamic selection.

  • Missing NSGeometry.h in SDK - included in simulator SDK

    Hello all,
    I am working on my first iPhone game, and have been working in the simulator until today where I got my developer program activated.
    Compiling the game for the device for the first time gives me a weird error about not being able to link NSMakePoint method.
    So I dig into this, and it turns out that the iPhone SDK foundation framework is missing the NSGeometry.h (as well as a few other), which are included in the simulator SDK.
    I've only found one other post about this
    http://discussions.apple.com/thread.jspa?threadID=1600790&tstart=30
    Which didnt really solve it.
    So I wondered if this is a known issue, and something that is reported + acknowledged to get fixed.
    Looking at the documentation here
    http://developer.apple.com/documentation/Cocoa/Reference/Foundation/Miscellaneou s/Foundation_Functions/Reference/reference.html
    it should be part of the foundation framework, so there is definitely a bug here.
    Best regards
    Thomas

    I hit this one too (@_@).
    You can #define NSPoint CGPoint and that will get you some mileage. For the NSGeometry items, I have used the pattern of #define NSPointInRect(p, r) CGRectContainsPoint(r, p) (or whatever the actual names are; I don't recall). That isn't super cool, but if you only use a few routines it may be enough.
    I'm not certain about the archiving issue. You may be able to convert to NSData or NSValue and archive that. Or possibly NSString.
    As far as things working in the simulator and not the device, I have found a number of them including NSSocketPort, NSSocketPortNameServer, NSConnection, NSHost which either are not there or only have diminished capability. I am -assuming/hoping- that these will be incorporated into a future revision(s) of the iPhone OS... But I have no way to know.

Maybe you are looking for