Missing nvidia force 8800 gs driver o the windows site

I have configured my iMac with Boot Camp. Have installed Windows. Missing the nvidia geforce 8800gs driver. The install disc # 1 won't run and none of the nvidia drivers work. The nvidia driver from their site does not work. Any suggestions.

Hello,
Check out this thread: http://discussions.apple.com/thread.jspa?threadID=1595829&tstart=0
Carolyn

Similar Messages

I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours.

I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!

lan drivers*

HT6114 Hello, I just updated from os 10.7.2 to os 10.9.2 and now I can't print to my HP 8600 plus printer. I've downloaded the new driver from the hp site and still no printing.

help!

Did you run the installer for the driver from the downloads folder?
Is the printer wifi or wired?
Are you certain the printer has joined the wifi network if its wireless?
If you go to sys prefs and the print and scan page is the printer red or green lit?

Time Machine, External Hard drive, and the Windows Partition

Is it possible for me to back up my mac with Time machine, and also back up my windows partition on the same HD? I just got the External HD today, so I'm very new at this. Thanks for your help.

Time machine does not work with windows drives.
however the way I have backed up my bootcamp partition is to use diskutility to make a dmg of the windows partition. I then only make regular backups of my user account on the windows partition.
You could partition the new external drive and make 1 partition hfs+ and the other fat32. Then when booted into windows it will see the fat32 partition on the external drive. Then you can carry out backups from within windows to that partition.
Timemachine will backup your mac partition with no problems.

I use the "Bootcamp" on my Mac to work between Mac and Windows. How do I get my iTunes music from the Mac side of my hard drive to the Windows side?

I use my "Bootcamp" harddrive to work on both the Mac side and Windows7 side of my computer. How do I get my Itunes Library from the Mac side to the Windows side of my Mac Book Pro?

Time Capsule is for backing up your data. It's not really a solution for live file storage; using it will not reduce the bloat of your boot volume.
If you have a lot of movies, music, etc. in your iTunes Library, that can be a good thing to move to an external drive. Here's how:
http://support.apple.com/kb/ht1449
After you follow those instructions to copy your media over to the external drive and point iTunes to it, you can delete it from your internal drive.

Is it possible to use an external hard drive as the windows partition with boot camp?

I am looking to get a Macbook Pro adn was researchin the different software advantages over PC and found a program called oot Camp that allows you to run Windows on your Mac. I thought that this was interesting as it was sort of the best of both worlds. I wanted to know from people who have used this before: How well does it work? Does it slow down the computer at any noticable rate? Etc.
The last question that Ive been trying to find an answer to, but have no conclusive results, is wether you are able to select the partition as an external hard drive or not. Also how it affects your ability to use an external drive as well. Answers are much apreciated, thank you.

Welcome to the Apple Support Communities
Boot Camp is an application that emulates a BIOS so you can install Windows on a second volume on your hard drive. It can't be installed on an external disk because Windows can't be installed on an external hard drive. It works well if you need performance

I need to migrate Firefox profile settings from an install on a drive where the Windows 7 OS has been corrupted to a new drive and current Windows 7 install of Firefox is active. Is there any solution? Thanks.

Had to reinstall Firefox on new drive with new install of Windows 7.
Missing all of my profile settings.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

HT3696 Is this memory cleaner available for windows machines? Where may I find it and or other free windows apps other than at the windows site. Thank You...

is there somplace that has the mac applications that would work for a windows desktop?

1. Why don't you exercise a little self-reliance and do a simple Google search?
2. How do you expect anyone to even remotely answer your question since you didn't even meniton what "memory cleaner" you're referring to???

Satellite P10-554 nvidia geforce fx go5600 driver update

Hi all,
I just tried to update to very last nvidia driver version 78.01. Running the setup I got an error message indicating that the setup routine couldn't find a driver that is compatible with the hardware installed. According to the doc the new update supports the harware installed.
Does someone why I can't update to most recent version?
Thanks in advance
Karl
BTW: I already uninstalled the current driver, rebooted the machine and tried to install the new version without success.

Hi Juan, hi R2D2
thanks for your answers. I found the driver on the german site as well as on the english one:
http://www.nvidia.de/object/winxp_2k_78.01_de.html
http://www.nvidia.co.uk/object/winxp_2k_78.01.html
If you follow the link "Products Supported" on this page a list of the supported products is being displayed (I just noticed that the card supported is GeForce FX 5600 and not GeForce FX Go5600). May that's the reason.
The last driver on the Toshiba site is 4.4.8.5.
Since weeks I'm trying to pinpoint a problem that the turns off due to the settings of the power management. But I can't reactivate the display when moving the mouse or pressing the keyboard. So I try to find out if it's a software or a hardware issue, but without success so far.
Best regards
Karl

Tecra M3 Geforce 6200 driver - says the hardware isn't supported

Hi,
I tried updating the Geforce 6200 with the Forceware 91.47 driver from Nvidia's site, but it said that the hardware was not supported. What are the latest Nvidia drivers I can use for the chipset? I want to use OpenGL 2.0 features, but the driver on the Toshiba site only supports OpenGL 1.5 (i think). I have a Tecra M3.
Also if i added more RAM, would it allow me to increase the amount of RAM used by the card?

I take your point about stressing the hardware, but wouldn't the driver automatically detect the clock speed and other capabilities of the 6200 and adjust itself to match the hardware? After all, as you know, the Forceware is a Unified driver and has to work with many different chipsets which are usually set at different speeds. Your opinion on this would be welcome.
Either way your point is a good one and i am going to stick with the Toshiba driver until i am more certain.
Thanks for your input.

I would like to recover my bookmarks from my old hard drive that I now have as an external USB drive. The old OS was Vista; the new is Windows 7.

I recently had a new hard drive installed on my laptop; this hard drive has the Windows 7 OS on it.
At the same time, I had my old hard drive mounted in an SATB enclosure so that I could use it as an external USB drive. [I stupidly did not export my bookmarks before doing all of this]
Everything seems to work fine [I can see all of the files], but I cannot find out where my bookmarks are stored on the old hard drive.
Is it possible to find them and get them transferred over to the new hard drive??
Thanks!!

Bookmarks are stored in a file called places.sqlite inside the profile folder. You can copy that file from the old profile folder into your current profile folder. For details of how to find the profile folder see https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox
You can recover more than just the bookmarks - https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

The Windows support software could not be saved to the selected drive

I am trying to use bootcamp assistant to set up windows 7 on my 27" iMac (late 2013). I follow the instructions: select all the tasks in the 'select tasks' pane, then I choose the 32GB MS-DOS (FAT-32) flash drive that I am using and the windows 7 home premium image file and click continue. In the Task Status pane, it first formats the flash drive, copies the windows files and downloads windows support software. However every time that I have tried this, when the progress bar is about 2/3 of the way finished -- during the 'Downloading Windows Support Software' task -- an error pops up saying that 'The Windows support software could not be saved to the selected drive' and brings me back to the task selection pane. Upon reading other articles, I have downloaded the latest bootcamp5.1.5621.zip file, but I don't know what to do with it. Any help is greatly appreciated,
Thanks,
Adam

Just posting this for anyone else having this problem. I found that the problem was that I was using a USB 3.0 flash drive which is not natively supported by windows. So I think BCA was trying to prevent me from downloading all the files for no reason.

How to unlock all MBAM encrypted drives from the startup

Hi,
One of my client is using MBAM 2.5 in his environment and all the clients are running on Windows 7 ENT SP1.
Once the user logging to his encrypted PC it will only unlock the operating system drive. User has to go to my computer and he has to unlock the second drive. My client is looking for a solution to unlock both the drives from the windows startup.
Appreciate if you could help me to find a way to achieve this requirement.
Cheers
Chanaka

You can achieve it by setting auto unlock setting for the Fixed data drive, here is the link for that:http://technet.microsoft.com/en-us/library/dn645338.aspx. Only
caviet for having auto unlock is that your OS drive must be encrypted.
thanks!
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

Driver for the Perc 6i integrated controller for windows 2008 R2 64bit

I found the driver on the web site but it will not install cause it says its a 16 bit application and I need a 32 or 64 bit to install. How can I install this? Current driver installed is 4.5.0.64-Date is 2-6-09.
Driver name on the web -> DELL-PERC-6-I-Integrated_A14_R313336.exe
A text document explaining the install would be great!
Thanks in Advance,
-George

Hi,
Regarding the current issue, you’d better contact Dell support for the proper driver. Thanks for your understanding.
http://www.dell.com/support/drivers/us/en/04/ProductSelector/Select?rquery=na
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

X130e wireless problems: determining the correct driver, enabling the radio

I just spent 5 days and many hours getting the wireless on my wife's x130e to work, so I thought I would share my experience in the hope that it may help somebody.
First thing: delete all of Lenovo's supplemental software that attempts to in any way manage the wireless connection. It and Windows disagree on what to do, apparently. Windows would tell me the wireless radio was on, and the Lenovo software would tell me it was off -- which it was, but because Windows thought it was on, it wouldn't turn on. So get rid of the Lenovo stuff, and just use Windows to install and manage the wireless driver. The O/S is ultimately in charge, so deal directly with it and don't try to use a middleman.
As far as choosing the right driver: Lenovo's driver matrix still leaves you with several choices of driver even after drilling down to the bottom. I finally opened the bottom of the computer (3 screws, it's easy, see online hardware manual) and looked at the wireless card. In really tiny print I eventually found "Realtek RTL8188CE." (See photo. Your card may not look like this, but you ought to find something helpful.) You can go to the Realtek site, search for that number, and eventually find a driver. I ended up using a driver from the Lenovo site, but I felt comfortable that it was the correct one when the Windows Device Manager identified the author of the driver as Realtek.
So...when I finally was satisfied I had the correct driver, and I deleted all the Levono auxilliary software, and setup the wireless card with Windows, it worked.

it's the same dhcp thing... shutting the daemon down should do a "dhcpcd -k" - but I have to look into it.. .as it doesn't work too well on my machine...
try "dhcpcd -k eth0" then network start... that *should* work the first time, as it releases the dhcp lease...

Missing nvidia force 8800 gs driver o the windows site

Similar Messages

Maybe you are looking for