Missing some fields using TRANSFER write to file

Hi, Friends:
I have a structure which has been populated with data, saying its name is "h_fkkcolfile", and it has 30 fields.
The following statement is used to write its contents to one line of the output file, the file is in application server.
TRANSFER h_fkkcolfile TO i_file_name.
After the statement, we check AL11 for the contents of the file, we found only 19 fields has been written to the file, missing other fields.
Thanks in advance.
Liang

Hi,
In AL11 you can see only 512 char length, but when it download to local pc we can see all the fileds
try to download the file using transactio code
CG3Y and see the data.
Regards
Krishna

Similar Messages

  • Extracting an image data merge field using only an indesign file and not document.dataMergeProperties.dataMergeFields

    Hi,
    I have kind of a weird requirement but I hope you guys can help out.
    I need to extract all the custom fields used in an indesign file without referencing the dataMergeProperties of a document. Sorry if this is a weird request it is just what I've been told (our system needs to not crash when people upload a variety of in design documents to generate high resolution jpg preview documents).
    I can already get all the text custom fields by looking for "<<" and ">>" in the text frames of a document but I'm having a really hard time finding the image custom fields.
    I tried looking at the rectangles for a given page but that didn't seem to help (but maybe i'm missing some there). I also tried looking at the graphics and images collection of a document but this seemed to return only graphics that are hard coded on the in design document and not the custom image fields.
    Any help would be appreciated!

    Uggg....
    Found the answer after I realized I was looking at the wrong SDK (5.0 instead of 6.0)
    I'm using the doc.hyperlinkPageItemSources property to get these images. It also looks like you can get the image data merge fields from DataMergeImagePlaceholder (but rememeber I couldn't access this).

  • I want to display some fields using the BDC and i want to know thruogh whic

    I want to display some fields using the BDC and i want to know thruogh which transaction these fields are displayed.Could you please help me out.

    You can use JFreeChart which is a free and good tool to generate graphs in Java. It has samples and other guides which you can use to get started...

  • Value Maps for Collections in Archiver missing some fields

    Hi all,
    I'm using Archiver and I need to map some of my folder metadata like the profile trigger but when I'm at the "Edit Value Maps" to map the old value to the new value for this field I find that the field I want is missing (in fact all fields that start with ColMeta. are missing.. something tells me these are the fields that are custom).
    It does not let me do a custom query either! is there any way I can get this to work?
    This field does appear for Content tho, it's just for folder/project metadata.
    I'm looking into doing a "Field Map" from ColMeta.xProfileTrigger to some field available and then use that field for the value map but I'm not sure of the implications this will have in the field I choose since those others are fields used for something else and I don't want my mapping going to that other field.
    Thanks for any help,
    malky

    Well nevermind I solved it, but I'll say how in case someone has the same problem:
    Just create the archive with any field, then go and replace that field with the one you want everywhere in the archive.hda file.
    If someone has a more elegant or better way to do this I'd like to hear it for future reference.
    Cheers,

  • Change character set used to write a file in application server.

    Hello Experts,
                       I want to know if we can change the character set used to create a file in application server.(Is it posible to use a particular character set while creating a file in application server.
                      I will be very great full for any help.
    Thanks in advance.
    Sharath

    Hello Sarath,
    There is an extension CODE PAGE with OPEN DATASET stmt.
    Can you please elaborate which character set you want to write to the application server?
    BR,
    Suhas

  • Missing some fields in Quality

    Hi Gurus,
    I have loaded a flat file successfully into master data info object in development.
    Later I moved the whole development part into quality,there I triend to load the same data.
    It also went successfully but I found some of the fields missing in Quality,even though the mapping is correct in update rules.
    Any idea why it is happening like this.

    Hello,
    What type of element you are using for printing data? I mean table or template. If template then it may not print because data exceeds the width of template cell.
    Enjoy SAP.
    Pankaj

  • I have used the write jpeg file from intensity but image colours are different

    Here are the relevent files for my program.
    Insert these values
    x1=218
    x2=368
    y1=45
    y2=45
    r=39 in order to run adn crop the pictures
    I hope someone can help
    Attachments:
    218_368_45_39.jpg ‏23 KB
    2ColourProgram.llb ‏355 KB

    Hi,
    I'd suggest you to use PNG format to save the images of your intensity graphs. You get sharper images than JPEG format.
    I made some modification to your program to save PNG files, anyway you can try to save in JPEG and see the difference.
    Alberto
    P.S. I removed the delay of 100ms from the final Equation with kl fator.vi, the speed is much increased.
    Attachments:
    2ColourProgram.zip ‏176 KB

  • Web Intelligence export to Excel misses some fields

    Hi,
    Our system is running BusinessObjects Enterprise XI 3.1 with SP3 (no fix packs).  The behavior I'm seeing is when exporting a particular Webi doc to Excel. 
    Here is some background info for the document I am attempting to export to Excel. The doc contains a section and the section has a crosstab including description header cells.  I have added an additional cell at the top of the section with section specific information in it- nothing that strange yet.  If my InfoView (Web Intelligence) preferences is set so that 'Select a priority for saving to MS Excel' is set to 'Prioritize easy data processing in Excel' then the exported document is missing the additional cell at the top of the section (all other data is fine).  If the setting is set to 'Prioritize the formatting of the documents' then the Excel export works perfectly.
    My question is why would this be?  The cell is just a simple dimension (string).  My only fear about changing this Excel setting is that there is a warning in the 'Business Objects XI 3.1 Release Notes' guide.  It states
    Large Web Intelligence documents should be saved to Excel format using the "Prioritize data processing" option". The generated Excel might not open if the document is large and saved with the "prioritize formatting" option.
    Thanks,
    Steve

    We are experiencing similar issue using BO 4 SP2 Patch 10 when exporting to Excel with setting 'Prioritize easy data processing in Excel'.  Exporting data worked after changing WEBI settings to 'Prioritize the formatting of the documents'
    Documentation regarding this option states following:
    "Under "Select a priority for saving to MS Excel", select the option that best fits your needs:
    u2022 If you want to display the data in a format that is similar to working in Web Intelligence, then
    choose Prioritize the formatting of the documents.
    u2022 If you want to display the data in a text format, then choose Prioritize easy data processing in
    Excel."
    If I understand this explanation correctly then both options should have extracted the same content to Excel. Difference should have been how the contents were formatted and should not have caused loss of information.
    I logged support ticket for this issue.

  • Using Express Write LabVIEW File to store data in subprogram doesn't overwrite.

    The main program is an Event Structure that controls four other subprograms. In the subprograms the data is stored in the express IV Write LabVIEW Measurement File set up to overwrite the collected data. When the subprogram is stopped with the main still open, then restarted, the file is appended not overwritten. It appends where the last time the previous file was stopped.

    There is an input to the Wrive LabVIEW Measurement File which is entitled 'reset.' Make sure that is set to true so that the file writing process starts over each time data enters the Express VI.
    John M

  • How to close a write to file express VI

    Hi, 
    I am using an Write to File express VI inside a subVI in LabVIEW 7.1.  Since it is in a DAQ loop it is configured to create only one file even though it is called many times. 
    The problem I am having is that when the subVI itself is closed and reopened the express VI does not prompt to create a new file.  Is there a way to get around this? 
    I am hoping there is some sort of invoke or property node that I can use on either the express VI or the subVI itself to close or "reset" it.
    Does a subVI stay in memory even after the front panel is closed?  I am guessing this is what is causing my problem.  Any ideas?
    I do realize the BEST thing to do here would be to simply not use an express VI but I am hoping there is a way to fix this without going that far yet.  From what I can tell LV7.1 does not allow me to convert an express VI to code which makes it look like it will take even longer to rewrite this.
    For now the solution we have in place is the following:  close the subVI, close the main program (the calling VI), and then reload.  
    Thanks,
    Dave

    dave,
    if i remeber correcty... there is a file path option will be available with the express vi... I actualy can not reproduce this here since i dont have LV 7.1. So if you feel that the express vi does not gives you a prompt for selecting the file path, then just place a "File dialog" function before the express vi and wire the selected path.
    Regards
    Guru (CLA)

  • Bug in writing Integer Data in Hex in Write Spreadsheet File

    It appears that Write to Spreadsheet File forces all data to I64. Try writing an I16 or I32 array with a negative number. Format specification to 4x, 8x or whatever is ignored and you get a full completent of 16 bytes with a lot of FF's at the beginning making it I64 
    Chief Scientific Officer & Ex-Head
    Advanced Centre for Materials Science
    Indian Institute of Technology
    Kanpur 208016
    Phones: +91-512-2597830, 3927830(Off), 2574628 (Res), 9336117477 (Mob)
    Fax: +91-512-2597459
    E-mail: [email protected], [email protected], http://home.iitk.ac.in/~sg

    Hi;
    it's not a bug it's a feature :-)
    Whenever you want to format numbers the formatting routine will try to leave as much digits as needed/possible. When you format I8 then 2 digits are ok, I16 needs 4 digits and so on.
    You can easily test this behaviour when using the 'Array to spreadsheet string' function (it's also used inside 'Write spreadsheet file'). When saving negative integers as Hex formatted ALL digits are needed to describe the number and so you get all of them in your text file!
    The only problem is: 'Write to spreadsheet file' only knows about I64. Whenever you want to save negative numbers you get 16 digits regardless of format string.
    Solution:
    Change the 'write to spreadsheet file' as described before or do the formatting on your own by using 'array to spreadsheet string'!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • IMAQ Write JPEG File doesn't save color

    Hi, I'm writing an 8 bit image to file. If I save it as bmp (using "IMAQ Write BMP.vi") File then color data is saved. If I save it as Jpeg using "IMAQ Write JPEG File", then I only get grayscale. I have attached a demonstration. There appears to be a bug in the IMAQ vi.
    Attachments:
    ni_demo.llb ‏203 KB

    At IMAQ create.vi you need to specify RGB image type. You are actually using 8 bit, that is a grayscale type.
    Attachments:
    ni_demo.llb ‏203 KB

  • Hi how to write text file continuosly

    hi i know how to write a text file but if i write something and close the
    whole program, then when i open the program and do the samething,
    i wanna write something contiguosly, write the next line of the very last saved line..
    but..i tried couple of times,but the written sentence just overlapped,,,and
    can't write continuously,,,
    how to solve it............

    Are you saying you want to create a file the first time you run a program, and append to the file the second time? If so, check the constructors for the class you are using to write the file. There should be one that takes a boolean flag telling it you want to append instead of overwrite. Set the flag to true.
    For example:
    http://java.sun.com/j2se/1.5.0/docs/api/java/io/FileWriter.html#FileWriter(java.lang.String, boolean)FileWriter(String fileName, boolean append)
    Constructs a FileWriter object given a file name with a boolean indicating whether or not to append the data written.

  • How to hide the field using internalname or directly without using SPD

    Hi there,
    I like to customize my form and hide some fields using the InternalName; it would be great if you can provide me tips / instructions.
    PS: I dont have SharePoint Designer access; so please provide suggestions without using SPD 2010
    Thanks
    DMlv

    You can do it using jquery based on Title attribute of the field by adding content editor webpart on the form and writing your jquery there. Will that be fine with you ?
    If yes below are the pointers
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/50aa6f8d-f742-4400-82f3-7949ab1c215e/need-help-manipulating-form-fieldsrows-using-jquery?forum=sharepointdevelopmentprevious#802d9d4d-c19b-4752-a4fb-e38f40f50c51
    http://ptsharepoint2010.blogspot.in/2010/04/hide-fields-from-newformaspx-and.html
    http://sachinvkatkar.blogspot.in/2013/02/hide-fields-from-sharepoint-newform.html
    Geetanjali Arora | My blogs |

  • Write JPEG file error on Compact FieldPoint

    Hello!
    I'm using Compact FieldPoint 2120 and LabVIEW 8.2. I'm trying to capture an image of a front panel and to save it into Compact FieldPoint using the "Write JPEG file". Unfortunately, it gives the error 1.
    I indicated c:\<jpeg_file_name.jpg> for the path.
    I switched the target to "My computer" and the code works correctly.
    Is that a problem of the path or VI Write JPEG file cannot be impemented on Real-Time target, such as Compact FieldPoint?
    Thank you!

    Well, that's true that Real-Time does not support Write JPEG file (this is the first problem). I'm using now Write BMP file insteed. The second problem, verified also in my practice, is that the Front Panel does not exist too on Compact FieldPoint.
    My aim is to develop web-interface to deal with the Compact FieldPoint from any computer. That is true that it has its own built-in Web-Server, but it doesn't have a script-executive environement. My idea was to create a custom "web" server running in parallel with the principal Web-Server to execute VI scripts.
    For that purpose I used TCP Listen -> TCP Read -> TCP Write runing on the port 82. I can send from any browser the request http://<IP address>/<script.vi>?<params> and my custom server parses the request and executes the <script.vi>. Then to avoid the problems with HTTP protocol I write the redirecting request to the port 82 like <meta http-equiv="Refresh" content="0; URL=<result_page.html">. So, It works.
    The result_page.html must represent the acquired data from the Compact FieldPoint channels. So, I execute a requested script to show the specified data into Graph waveform and then to take a snapshot and to save to the Compact FieldPoint. Then the result_page.html contains the link to the saved snapshot picture.
    Once executing the requested VI script, the Invoke Node gives the error 1003 stating that "the VI is broken etc...". I think that is because of the script attempts to take a snapshot of a panel which doesn't exist...
    Maybe somebody has an idea how to view the acquired data in browser ?
    Message Edited by Mons on 07-10-2008 06:06 AM

Maybe you are looking for