Missing the single sample direct edit so much

please dont forget this!
thx
TWR Mastering

Here is a template for large array storage/manipulation. As you can see, the array exists only in the shift register of the VI. Is is manipulated "in place" without unnecessary copies being passed to/from. The element is a typedef so it is easy to adapt the code to your array type (and add dimensions...).
LabVIEW, C'est LabVIEW
Attachments:
Huge_Array_Core.vi ‏72 KB
Element_of_Huge_Array.ctl ‏6 KB

Similar Messages

  • HT1849 How do I transfer a single song that I purchased into my complete my album so I can have the complete album and not an incomplete album missing the single.

    How do I transfer a single that I bought previously before purchasing the complete my album so that I have the complete album and not missing the single?

    Welcome to the Apple Community.
    Not sure what you mean by transfer. I suspect you are trying to get it listed in iTunes as part of the album, in which case you can change the details in 'Get Info'.

  • Why am I missing the first sample with an E-series DAQ?

    I am continuously acquiring a repetitive waveform. I generate an external, gated channel clock, which acquires about 50% of the waveform. I initially trigger the acquisition to be sure the first sample of the first waveform is always in the same location. About 50% of the time I miss the first sample. It acts like there needs to be a convert clock before the trigger, and if there isn't, it eats my first convert clock (sample). Any suggestions?

    Ron,
    Thanks for your response. Actually, the trigger and convert clock is
    generated externally by a 40 MHZ FPGA and are very accurately phase
    locked. I have verified on an oscilloscope that they are not jumping
    around.
    I'm acquiring a repetitive waveform so I have a trigger and then,
    after about 10us, a train of ~ 1000 convert clocks to acquire the
    waveform. After a delay the sequence starts again. I'm acquiring
    continuously because I can't afford to miss waveforms so, after the
    initial trigger, the trigger is ignored. I then rely on the fact that
    I know how many samples are in each waveform to display and save the
    data to a file.
    I believe the problem happens when the Labview software initially
    enables the DAQ. If the DAQ is enabled during the dead
    time, it won't
    see a convert pulse prior to the first trigger. If it is enabled right
    after the trigger, I will see a convert pulse before the trigger.
    I acquire in two different modes. On acquires 50% of the waveform and
    has convert pulses present 50% of the time. The second mode acquires
    almost 100% of the time with only a 100us deadtime at the end of each
    waveform. In the 50% mode I miss the first pulse about 50% of the
    time. In the ~100% mode I haven't yet missed a pulse. When I miss the
    first pulse, all the subsequent data gets shifted by one sample, and
    the last sample becomes what should be the 1st sample of the next
    waveform.
    So my theory is that the DAQ needs to see at least one convert pulse
    after it is initialized by the software prior to being triggered.
    Otherwise it eats my first sample.
    Thanks for your help,
    Barry

  • I am missing the back button,file,edit,viewhistory,bookmarks, tools, help line on mozilla. Where did go& can I get it back?

    I have had mozilla on my desktop for 2 months. Last week I lost the arrows to go back, file,edit,viewhistory,bookmarks,tools,help on the open page. I tried the f11 button. I can't navigate without the address bar. Any help would be appreciated.

    Does this help ?
    * [[Back and forward or other toolbar items are missing]]

  • I am missing the choices of "File, Edit, View, Tools, etc., at the top of my page, how do I get them back?

    at the top of the screen....where you can click on FILE or EDIT or VIEW or TOOLS....etc., that entire line is missing from my Firefox window....how do I get them back?

    Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
    Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
    The F10 can also be used on most PC's to temporarily reveal the Menu bar.
    https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  • Manipulate single samples?

    Several times I had to manipulate single samples in Cool Edit Pro 2.x by looking at an extremely small time scale and then taking a square dot and lift it or drop it. As I heard, this could be done in Audition 3.0 too, which seemed to be the direct follow-up of Cool Edit Pro 2.x.
    Now I am testing CS6, having lots of problems and cannot find a method to get my square dots back, marking the single samples. Is there a way to get those dots back, which I can lift or drop? I have a lot of recordings, with extremely short clicks and other small such problems, which I like to manually restore that way and not rely on unknown filters, which do a lot more to my stuff than what I want. I know I can mark around a single sample and change its amplification, but that is extremely complicated if you want to do that for more samples. Maybe I need to stick to my Cool Edit Pro 2.x and do not buy something very nice, which I cannot use(?)...
    About my other problems with CS6 (except for the the extremely exaggerated startup time):
    CD Burning:
    It is absolutely not intuitive how to start burning a CD. I thought it wasn't implemented until I viewed a boring video, and even then I needed to get into a help file for a version in a different language. That is really bad human-interface-programming. (I may be able to know, I programmed a lot since 1975, complicated programs that did not need any such manuals...)
    Playback issue:
    Playing a marked part and shifting the playing cursor and marking-boundaries (with or without loop switched on), sometimes plays totally the wrong things. This is a real bug.
    mp3-pro:
    How to save as mp3-pro file, or do I again need to pay for another mp3-pro encoder, which I already have in Cool Edit?

    That method of sample manipulation was already described by me, at least I tried to, thanks anyway. What I want seems to have been deleted.
    About CD-Burning: In CoolEditPro there is a "CD Burning" directly to choose from the "File" pull-down menu. Now I must know, that I need to choose "File/New/CD-Layout" (and that in another language) to be able to start getting to the point, where CoolEditPro leads me immediately. How should I know that I need to take this detour? How should I associate this with the simple action "I want to burn my stuff on CD", without knowing what you mean?
    I think that it would be better to have a CD item, maybe indeed under "File", where I can choose either to extract or (whatever is necessary) to burn. Now burning is completely separated and hidden for newbies.
    Of course your actual implementation is great, but hard to find.
    Playback: I needed to put spoken audio into a text file. Therefore I marked a small piece and let it loop, to hear the voice and type it in. Somehow during the procedure shifting the marking boundaries and playing cursor, unlooping and looping again, repeating this, misusing your fine program as a dictating device, audition sometimes gets confused and plays a different part than where the visible playing cursor runs.
    Just try to misuse audition my way, keeping the usage of a dictating machine in mind, and you must be able to repeat it.

  • I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

    I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 
    How large is your hard drive and how much hard drive space do you have left? 

  • Final Cut Server (FCSvr) missing the Edit Proxies Device in the Advanced Administration Pane.

    Final Cut Server (FCSvr) missing the Edit Proxies Device in the Advanced Administration Pane.
    If for any reason an Admin has mistakenly or purposely deleted the Edit Proxies device
    from the FCSvr Java Admin, and you'd like to restore connective to it following the instructions below.
    Note verify these symptoms, open the FCSvr Java Admin, Go to Preferences and the Proxies Pane and inspect
    If the field and drop down for Edit Proxies is missing please backup your FCSvr DB manually and following the steps below to restore connectivity.
    1. From the Terminal from the following command
              cd /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/MacOS/
    2. Next run the following command
               ./fcsvr_client getmd --xml /prefs/0 > ~/Desktop/prefs0.xml
    This will output a XML file containing the Final Cut Server Global Preferences to the Desktop folder of the currently logged in user.
    3. Using for favorite XML Text Editor (mine is TextMate) open the file that was output
    4. Notice the XML element and attribute values between lines 29 and 31
      <value id="PROXY_CLIP_EDIT_DEVICE">
       <address>/dev/3</address>
      </value>
    5. From the command line run the following command to determine the Device ID for you Edit Proxies device
    ./fcsvr_client search /dev
    You should get an output similar to what's below.
    Address        DEVICE_NAME                   DEVICE_TYPE                  
    /dev/20        Edit Proxies                  contentbase                  
    /dev/9         MEDIA                         filesystem                        
    /dev/1         Proxies                       contentbase                  
    /dev/2         Version                       contentbase 
    Record the new Device id for the Edit Proxies device.
    6. Open up the file /Desktop/prefs0.xml and XML attribute in line 29
       <address>/dev/20</address>
    to the value of the Edit Proxies from step 6.
    7. Save the /Desktop/prefs0.xml
    8. From the command line run the following command
    sudo ./fcsvr_client setmd /prefs/0 --xml  ~/Desktop/prefs0.xml
    enter you admin password if prompted.
    9. Close and reopen the FCSvr Java Admin, Go to Preferences and Proxies and inspect
    The field and dropdown should reappear.
    If for some reason this didn't work, feel free to contact me offline.
    Nicholas Stokes
    [email protected]

    H.264 is a puzzling choice of codec for edit proxies. H.264 is not an edit-friendly codec since it is a complex long-GOP structure and will require a ton of rendering just to play back the timeline. ProRES 422 Proxy would be a much better choice for editing. I'm afraid I can't account for the differences between Compressor and FCServer in this case, but my gut tells me the non-I-frame codec you are trying to use for edit proxies might have something to do with it. Maybe for an edit-proxy workflow to operate properly on the server-side the codec must be I-frame? Is there any reason you do not want to use ProRES 422 Proxy? They are about 1/3 the footprint of 720p24 DVCPRO-HD, which is already very efficient. For that frame rate and frame size they would be roughly half the heft of good ol' DV25.
    So my answer to all three questions would be to try ProRES 422 Proxy for your edit proxies and see if everything lines up.

  • The DPS App Builder keep asking me to actived the Single Edition even being a Creative Cloud Member.

    I'm having problems to active the Single Edition. The DPS App Builder keep asking me to actived the Single Edition even being a Creative Cloud Member. What should I do? Am I missing something?
    Tks,

    You may have already resolved this, however for benefit of other members:
    Follow the troubleshooting steps mentioned in this article and make sure you click on 'Create App' from Folio Builder Panel once you follow all the steps:
    http://helpx.adobe.com/digital-publishing-suite/kb/dps-ccm-users-get-activate.html

  • When I get an ICS from Outlook that is a multi-day event it populates my iCal as a single day and since I am not the owner I cannot edit the ICS.

    When I get an ICS from Outlook Express (Office is PC based) that is a multi-day event, it populates my iCal as a single day and since I am not the owner I cannot edit the ICS. I have to delete it and send a "decline notice" to the sender and re-enter it so I can put in multiple day events. Help!

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

  • How much storage units can be added in the single bin.

    Hi all,
    Can anybody tell me how much storage units can be added in the single bin.
    Dev

    Hi Dev,
    AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
    Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
    In bulk storage, you need to define for each block (or row) how many
    storage units fit into the block.  For this purpose, you must define
    both the number of columns as well as the maximum stack height.  *The*
    product of these factors usually gives the maximum number of storage
    +units and is determined automatically by the system.  However, it is+
    possible to change the maximum number of storage units to a lower number
    if the storage bin or the material features require this.                                                                               
    Hope it helps.
    Thanks & Regards,

  • [svn:osmf:] 13000: Adding the missing readme file for the captioning sample app.

    Revision: 13000
    Revision: 13000
    Author:   [email protected]
    Date:     2009-12-16 10:36:36 -0800 (Wed, 16 Dec 2009)
    Log Message:
    Adding the missing readme file for the captioning sample app.
    Added Paths:
        osmf/trunk/apps/samples/plugins/CaptioningSample/readme.txt

    Carey,
    I have tried london1a1's workaround, and it has not made any difference.
    It seems that london1a1 suggests changing the Camera.h file in this location:
              Users/london1a1/Documents/DW_NAF/PhoneGapLib/PhoneGapLib/Classes/Camera.h
    Whereas you're saying to change the Camera.h file in this location:
              /Applications/Adobe Dreamweaver CS5.5/Configuration/NativeAppFramework/DWPhoneGap/iphone/PhoneGapLib/Classes/Camera.h
    I've tried changing the Camera.h file in both locations.  Neither has made a difference.

  • [svn:fx-trunk] 13293: When making the halo - mx namespace changes we missed the following edits in revision 12635.

    Revision: 13293
    Revision: 13293
    Author:   [email protected]
    Date:     2010-01-05 17:07:48 -0800 (Tue, 05 Jan 2010)
    Log Message:
    When making the halo -> mx namespace changes we missed the following edits in revision 12635. The mxml-manifest.xml describes the contents of the legacy Flex 3 MXML 2006 namespace and the presence of this file is required by Flash Builder. The mx-manifest.xml describes the contents of the MX Component Library namespace. From MXML 2009 onwards it does not include the built-in ActionScript types (those are language elements in the MXML 2009 language namespace).
    QE notes: N/A
    Doc notes: N/A
    Bugs:
    SDK-24568 - Remove obsolete library://ns.adobe.com/flex/halo mapping from frameworks flex-config.xml and air-config.xml
    Reviewer: Kevin
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24568
    Modified Paths:
        flex/sdk/trunk/frameworks/air-config.xml
        flex/sdk/trunk/frameworks/flex-config.xml
        flex/sdk/trunk/frameworks/mx-manifest.xml
        flex/sdk/trunk/frameworks/mxml-manifest.xml
        flex/sdk/trunk/webapps/webtier/WEB-INF/flex/flex-config.xml

  • Missing the edit and refresh at my contacts

    i had missing the edit logo + and logo refresh icon of the contacts list. how can i reset it back it back the icon.

    Go to Settings>iCloud and turn Contacts to On to restore the + sign.  What is the "logo refresh icon of the contacts list"?

Maybe you are looking for