Missing tracking information after restarting Color 1.5.1

Hi,
when I do trackings for grades in the Secondary, all works fine. But when I close Color, and open the project with the trackings again, all trackings are lost and In and Out point of the tracking are on the same position (the tracking has a red flag, instead of green). I don't think that I make something wrong, I work since Final Touch with this software and I think its a bug in this release.
Has anyone the same problems or works it?
Thanks,
Michael

Apple works on ProApps on a very low priority basis. And _no one_ ever knows when an update may be released.
To be perfectly honest, tracking in COLOR is not that good; its only single point, you wind up having to animate the shape anyway, and keyframes are probably better. Personally, I might have used the tracker about 2 or 3 times in the past 5 years? And then rendered right away, so this is a non-issue for me, and, judging by the traffic, very few others. And that's going to be Apples assessment, as well.
So, if it is vital to you, then by all means, USE that *Send feedback to Apple* button.
It will never be addressed otherwise.
jPo

Similar Messages

Missing track information over Airplay

I use AirPlay to stream my iTunes music library from a Mac mini acting as a media server, to a Denon RCD-N7 (with AirPlay update). This worked perfectly, including all of the information about the current track being displayed on the Denon. However, after upgrading iTunes to 10.6.1, the track information is no longer displayed, or is displayed incorrectly and incomplete, that is, either:
only the AirPlay logo is displayed, or
only the artist name for the previous track and the AirPlay logo are displayed
If I toggle the AirPlay setting in iTunes between 'Computer' and 'Denon RCD-N7', I can get the artist name of the current track to display, but it doesn't get changed when the next track is played.
Has anybody else seen this kind of problem, and if so can you advise how to fix it?
Thanks,
North

This turned out to be a problem with the Denon RCD-N7, not with iTunes or AirPlay. Fully powering down the RCD-N7 down (i.e. unplugging the power cable) then restarting it, resolved the problem.

Fonts missing from CS6 after restarting laptop

I've installed (and reinstalled) open-type Stone fonts on a new laptop with Windows 7x64 and CS6. After restarting the laptop, why are the fonts gone from the list of fonts available in CS6? I have to reinstall them each time I turn the laptop on.

Nothing to do with Adobe. Some security tool or your system restore is removing them to retain a specific state or you do not have proper permissions to make permanent changes on your system in the first place.
Mylenium

Missing Dock item after restart

Hi
Yesterday I got an update prompt from Picasa.
I put it in the dock, but after I updated OS X and restarted, it was gone.
I have got nowhere trying to find this update on Picasa pages, but could anyone tell me please
if it remains somewhere on my iMac, so I can update it.
It seems a bit inefficient if a Dock item can simply be jettisoned on restart
Thanks

Paul
Thanks
No, I did not click on it. I was going to do that after updating OS X.
I did not drag the updater anywhere.
Picasa's info says that with Mac, they provide the update and you either accept or decline.
I don't know if 'gone missing' will be considered as decline or if they will send it again.
Thanks

I am missing track information

Using Logic Express, I set up a new song file with 7 tracks to record simultaneously. We set up inputs and got our levels down, then started recording. We listened to each recording after to make sure we liked how everything was sounding. I saved the file. Then I chose "Save As.." to create a new file for the next song. When that song came up, I would delete the tracks, and then we'd start on a new song. Now when I open most (but not all) of the songs recorded, a warning box pops up that says AUDIO FILE NOT FOUND. and if I choose Skip, then the file opens with tracks shown to proper length, but no waveform on each track. I looked in the folder where the Audio Files were being saved, and many of them are missing. They are not located elsewhere on my computer. They are not in the trash. I think I might have just lost a week of work and a day of recording with a full band. I am sick.
Would the computer delete the track files even though they are still being used for a previous song file?

If you
a) still have the original iTunes folder on the source computer
and
b) have the same version of iTunes installed on each computer
you can simply copy the entire iTunes folder from the Music folder on the host machine to the same place on the new machine. This duplicated your library exactly, including ratings, playlists etc.

Missing information after restored from back up

I had an iPhone 4 traded it in, prior to trading it in I synced it via the cloud but not to my computer. When I got my phone from Sprint they started the restore process for me and said that it could take a little while but if I was missing any information after about a day or so to come back and they could help. Well after waiting a couple days and calling numerous times to sprint I gave up and went back into the store. Unfortunaly, some how my old phone was wiped before I came back. I then called 1-800-MYAPPLE for help, COMPLETELY UNHELPFUL! To shorten this story up, my new phone shows that I have 2.5 GB of data stored in the cloud and my new phone only has 35MB, I have all my contacts, all of my calendar info, half my notes, half my pics, none of my videos, and none of my reminders. The new phone has iOS 6.1.2 and I believe the old phone had iOS 6.1.1. How do I get the remaing info from my old phone?! I don't care if I have to download it to a computer or my phone it doesn't have to be on my new phone. Someone please help!

Thanks for the help! I didn't realize that photo stream doesn't back up videos and it deletes pics after 30 days. I did what you said and I did get my settings back and some apps I had lost and my music. So that's better than nothing! Thanks for the help!!

Track Information Lost on Upload

I am having problems when I upload tracks into iTunesU. The track information (tags) and getting messed up. This results in files being listed out of order in iTunes U as well as resulting in missing track information upon download. Anyone else have this problem and or a solution?

It sounds similiar to a problem I was having, and Apple's been looking at it. In my case, the problem occurs if I:
1) Create the file in Audacity (and open source recorder)
2) Add the ID3 tags in Audacity.
3) Further edit the tags in iTunes.
4) Upload the file to iTunes U.
I've also had the problem occur when I've exported a file without ID3 tags to iTunes and then made the edit in iTunes. In every case, iTunes has seen the ID3 tags locally, but once uploaded, iTunes U loses all the track information. Unfortunately, it's not consistent -- Friday I did a bunch of tests and it wouldn't upload track information; I did the another round yesterday and it worked fine.
This didn't happen when I recorded a file using GarageBand, exported it to iTunes to edit the ID3 tags, and then uploaded to iTunes U.
I did notice that when I edited the ID3 tags using another program (like this one and then uploaded it, all the track information appeared.
What program(s) are you using to create the content and edit the track information, and what's your workflow for those programs? And what kind of files are you trying to upload (mp3, m4a, mov, etc.)
Ken Newquist
Lafayette College

Mail Missing Plug-in after sending; quit and restart Mail fixes it

mail > Missing Plug-in after sending; quit and restart Mail fixes it.
Its very obnoxious after all these years to have Apple Mail continue to complain about Missing Plug-in
This happens for PDFs, .zips, .jpgs and other types.
Any ideas why Apple cannot seem to fix this?

Back up all data.
Boot into Recovery mode. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Missing clock widget after phone restart

Hi. After restarting my Z3 phone clock widget (preinstalled) vanish from homescreen and it isn't available from widget pickery What should I do to get them back?
Each end is happy. And if is not happy, it's not the end.

I have disabled apps, but none is related to clock widget. Disabled e.g.: google drive, dynamic wallpapers, evernote, chrome... But nothing with clock. It worked fine till my first phone restart (11 days since buying)
Each end is happy. And if is not happy, it's not the end.

Missing package information on MyBT accounts

Missing package information on MyBT accounts
and after lots of phone call no one can fix it.
which department do i need to talk to.
and can i have a name of some one it that department so I can look them up in the Directory if not a name a EIN will do.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Unable to update iTunes track information

So I recently got an iPod, and I decided to take my existing MP3's I have ripped over the years from my CD's and import them into iTunes and get my iPod loaded up.
Upon doing this, everything worked fine... I dragged and dropped my MP3's straight onto iTunes and let it sit for a few hours.
Now I'm trying to go in and fill in some missing/incorrect information on my files (add track info, number of discs in album, etc.) and I find that I am not able to on my older MP3's.
The MP3's say according to iTunes that they are version 2.3 of the ID3 tag. When I try to change one or multiple track information, it just simply doesn't change after I click OK.
I also noticed that I can't convert my ID3 tags when I choose the option. I get the message "Could not convert ID3 tags for all of the selected songs. The song may be write-protected or of the wrong type."
From what I can surmise, all of the MP3's I ripped a long, long time ago with MusicMatch are giving me the problem. I haven't used that program in ages. I was able to change song info with a rip of a CD which I believe was done by Windows Media Player.
How can I get these MP3's to work so I can change the song information in iTunes without going back through all my CD's and rerip them directly into iTunes? That would be a huge pain.
Thanks.
Andre

You'll want to right click on your "iTunes Music" folder (My Music\iTunes\iTunes Library\iTunes Music) and choose Properties. Once XP/Vista shows the property window, at the bottom of that window in the Attributes section. You want to clear out any checkmark or grayness in that and it will go through your music files and clear your read only attribute.
If that doesn't work, you'll want to look at the Security tab in that same box and make sure that the user you are logged in as has "modify" rights to the music files.
Andre

TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

All Browsers not able to open any Website while able to Ping all Websites but after restart server websites are able to open for 5 to 10 minutes only

All Browsers not able to open any Website while able to Ping all Websites but after restart server web sites are able to open for 5 to 10 minutes only.
Please Suggest me a solution.

Hi, we miss some information;
- do you use a proxy ?
- can you provide an ipconfig /all please
- do you use any firewall product that could block the computer on port 80
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Missing tracking information after restarting Color 1.5.1

Similar Messages

Maybe you are looking for