Missing Volume Bar

Hi I have a new nano and after a few days use I have lost the volume bar and the song time in minutes and seconds it just appears as a line of dots can anyone tell me if I can get it back. Thanks

Hi Jill: What you have described is one of the views you can get when listening to the iPod. When a track is playing, you can see elapsed time, album art or rating. The line of dots is the rating (I bet they greyed out meaning no rating set). It may help if you restore you Nano and then re-sync with iTunes. Here's how.... 5R's

Similar Messages

  • Missing volume bar when adjusting volume

    I have just got HP touchsmart 610, upon updating everything, notice when I adjust volume up or down there is white bar showing up on screen instead individual bars , can't find info where I can update this or perhaps driver is missing any updates for this will be appreciated.. 

    Hello Jake0505
    If you could elaborate a bit on your issue? There are different issues on this thread from the graphical representation of the volume bar being different to it missing. If you could be more specific about your exact issue I will endeavor to help.
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Volume bar missing and accesory may not be supported

    I am using Iphone 4, the volume bar is missing, and from 2-3 days when I plug the dock it says accessory may not be supported, when I adjust the dock cable it shows charging but actually charges very very very slow and after some time it again shows accessory may nor be supported . I have already cleaned the dock, Help. Is this the problem of dock, should I get it replaced..?

    Try to use the Apple USB cable that came with the phone and connect it directly to the adapter. if this works, the problem is your dock.
    If it is still not charging correctly, you should get it checked by an Authorized Appel Service Provider or Apple Store:
    iPhone - Contact Support - Apple Support
    Did you already try to reset the phone by holding the sleep and home button for about 10 sec, until the Apple logo comes back again?
    You will not lose data by resetting, but it can clear some glitches.

  • I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

    I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

  • Pavillion DV9005US missing green volume bar

    Running XP.  I can't get my green volume slide bar to appear on the screen.  I have verified all my keyboard drivers are current using HP on-line support.  I verified my display settings are enabled in startup--maybe I missed one?  I desire not to install a third party volume control if I can avoid it.  Can someone help me re-establish the slide volume that came with the HP laptop?
     v/r JR
    v/r JR

    In some models HP QuickLaunch button can also displayed the volume bar, I'm not sure if it was working for your model.Have you install HP Quick Launch Buttons?
    Install Microsoft .NET Framework, here before HP QuickLaunch Buttons.
    I used a third party one, very nice software and its a freeware.
    here
    3RVX, QuickTouch equivalent, (download 3RVX_2.5.msi) freeware from Matthew Malensek
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • HP dm4 1009tu volume bar missing

    Hi friends,
    I know this question might have been asked several time but no solution yet. I am using HP dm4 1009tu and suddenly the volume bar has gone missing. The quick launch button is working and volume can be increased or decreased but i believe the sound level too has gone down even at the highest peak.
    I tried installing the driver but no rescue even restoring at previous time has not helped.
    Any solutions for this??? Help is grealty appreciated
    Thanks

    Nicobart, welcome to the forum.
    I believe that the on-screen volume bar is part of the driver software.  Here is the updated driver for the audio.  Install it to see if it solves your problem.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Volume bar missing

    Help.. my volume bar, name of music and progress bar are gone. When I listen to music, my new video iPod screen is blank. When I click menu, it goes back to the list of songs (yea.. the screen is not always blank).

    Help.. my volume bar, name of music and progress bar
    are gone. When I listen to music, my new video iPod
    screen is blank. When I click menu, it goes back to
    the list of songs (yea.. the screen is not always
    blank).
    If the screen is blank, I imagine you don't have album art associated with your music. What has most likely happened is the center button was accidentally pressed twice during playback. This brings up the large album art display which, if there is no album art, will be blank. The solution, if this is the case, is to press the center button several times during playback until (hopefully) the progress screen comes back.
    I hope this helps.
    Regards,
    Dick Durkin
    vpr Matrix, Intel Pentium 4 processor, 2.4 GHz, 512 MB RAM   Windows XP   5G (Black) 60GB iPod video; (Black) 2GB iPod nano
    vpr Matrix, Intel Pentium 4 processor, 2.4 GHz, 512 MB RAM   Windows XP   5G (Black) 60GB iPod video; (Black) 2GB iPod nano

  • My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions.  Where is the setting for app sound?  I have gone to the multitask screen and the volume bar is empty.

    I recently found my phone outside in light rain (it had been there about 20 minutes).  It had some glitches at first, however after letting it rest overnight it seemed to mostly recover.  The one problem I am having is that I no longer have sound for any of my applications.  I do have sound for phone fuctions, and I am able to use the speaker for phone functions. 
    When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds.  I am able to make a video and it will record sound just fine.
    When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference. 
    Is there a setting I am missing, or am I just SOL?  I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

    Hi Baileyfour,
    Welcome to the Support Communities!
    The articles below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    There are two places where vibrations can be set.
    One is the Settings > Sounds
    The other area is Settings > Notifications
    If you have an app set to Alert, it may have a vibration set for it.
    iOS: Understanding Notifications
    http://support.apple.com/kb/ht3576
    Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I hope this information helps ....
    Have a great day!
    - Judy

  • How do I get my volume bar back on iPhone 4?

    My volume bar is missing from my iPhone 4 and this seems to be the reason the audio won't work when I try to play music. However, when I play a ringtone the audio is fine. I put my iPhone in the Bose speaker dock and the volume bar comes back, but only temporarily. I've already tried restoring it and it didn't fix the problem. Help?

    Just came home to find I have the same problem!! iPhone 4S, never jail broken,dropped or spilled anything on it! I have been using my original iPhone charger (when they came out with the new iPhone I just shaved my charging/docking station to fit) so it is a little on the dirty side!
    This is the first post I read so I did the headphone thing, the docking undocking thing, restarted it and messed with all the volume setting and neither of them worked.
    So finally taking "mike iPhone guys" post, I looked @ the 32 pin port at the bottem of the iPhone and I reminded me of a old Nintendo cartridge do untreated it as so.
    *** THIS IS HOW I FIXED THIS ISSUE, I DO NOT RECOMMEND IT BEFORE CONSULTING APPLE, YOU MIGHT DAMAGE YOUR DEVICE*********
    These are the exact steps I took ....
    1. I blew into the port and it did absolutely nothing!
    2. I took a vacuum ($200 Hoover windtunnel t series P.A.W.S pet approved vacuum, so it has some power behind it, not the most expensive but not the cheapest either) and used the smallest accessory, the long connection hose/tube with the smaller rectangle attachment and sucked the air out of the port.
    This worked for 5 secs my volume bar appeard and then disappeared again.
    3. I took a very thin butter knife, wrapped it with a paper towel that I sprayed windex with and stuck it in gently one both sides, tested and still didn't work.
    4. Repeated the previous step but added a little pressure and shoved the blade in the upper part only closest to the screen, not the bottem side the knife didn't want to go in as easy so I didn't try, alot of dirt was on the rag, then I used a dry part of the towel and did the same again until there was no dirt on it!
    Tested and still didn't work!
    5. Blow in it once more, and vacuumed it once more but this time putting my finger in the area that the vacuum didn't reach on both ends an lightly tapping it, WORKS FINE NOW! Just needed some
    Cleaning. I can only assume the dirt does make it
    Think that it's still docked.

  • Volume Bar is not working

    Dear Sir/Madam,
    I have a iphone 4. Update with ios7.1. I have a little problem with Volume bar. When i am trying to play music or video, Sound *****. It is not working. i can not listen sound volume, there is no sound bar in media file. i have Reset all data and did all the stuff. but it's not working though. It ***** sometimes. please help me to stay out of it.
    Thank You,
    Brad.

    Hello there,
    It sounds like you are missing your sound bar when trying to listem to music, or play video and have no sound. I recommend these troubleshooting steps from the article named:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Questions about ringtones, skipping volume bar, more...

    1) Both on my iPod touch and iPhone 3G the volume bar skips around the screen. I have had multiple products of the same SKU and they all have the same problem. If you have a response, include the number in your post.
    2) My iTunes credit was reduced from 6.48 to 1.00
    3) I bought a music video that never downloaded
    4) Can I recover ringtones and music videos off my old computer that was stolen?
    5) Keyboard lag. What's up with that?
    6) Why does my mother's iFwn 1st gen have better picture quality than my iFwn 3G?
    7) Only one of the speakers works. Unless the other is a mic
    8) My mothers iFwn has benn through 2 computers now but it still has crashing problems. It has been through multiple restores where she has lost all her pictures and contacts. This is not easy for her, what the **** do I have to say to the Apple store employees to get her iPhone replaced?
    Message was edited by: houseofwolves

    1) Not sure what you mean. Are you turning the iphone on it's side? This will change to landscape view. You can see where the volume bar should be in the manual.
    2) Did you not buy something?
    3) Contact itunes support, they are very helpful. The link is on your receipt.
    4) If the missing purchases are on you iphone you can attach iphone to an authorized itunes and hut File>Transfer purchases.
    5) Many have reported this. Do you have 2.1 software update?
    6) ?
    7) Iphone has only one speaker. You can see this on page 15 "basics" of the manual.
    8) Without using foul language, explain what is happening. Many people have had their iphones replaced for similar reasons.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • Sometimes the volume bar doesn't show up on the ipad

    Hello,
    I was wondering if anyone could help me with a problem I am having. One day out of the blue the sound on my wife's iPad stoped working for music or videos. The speakers still worked for ringers but not anything else, so I know that the speakers still work. Also I have noticed that the sound only works for the videos and music when you plug in headphones. Also for some reason if you go to raise or lower the volume the volume bar isn't present, I can't do anything with sound aside from hear my ringer. So I wanted to know if anyone knew what was wrong with it. I am thinking there might be a short because sometimes it will work again but only for about 3 seconds and then it doesn't work any more.
    Also please don't give me the link of trouble shooting steps because I have already done them all, and I have also reset the iPad back to the original factory settings and nothing fixed the problem. I even went as far as going to geek squad since I had free tech support from them for the moment and they just told me that according to all the test/trouble shooting procedure that there is nothing wrong with the iPad hardware or software wise and since the speaker works with the ringer, it is obviously working. However for some reason it does not work with videos, music, or anything else for that matter without the headphones being plugged in.
    If anyone has experience this problem please tell me what you had to do to get it fixed, and if repair was necessary how much did it cost?
    P.S. I am sure that the mute is not on.

    It is likely that you need a change a setting on your email server. See here -
    http://support.tigertech.net/outlook-2007-lmos
    http://email.about.com/od/outlookexpressbackuphelp/qt/et_server_copy.htm

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • IPod Touch 3.1.3 1G no volume bar.

    does anyone has this problem? i plugged in earpiece, reset everything,restore to factory setting,tried everything but still there is no volume bar appearing! There is a very very soft volume but its really depressing you can't adjust the volume!

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

  • Ipod Touch Version 3.1.3 volume bar disappeared and will not return

    The volume bar on my 1st generation iOS 3.1.3 ipod touch started disappearing then would return with tweeking of the headphones and sometimes when resetting all settings. Now it is gone completely and won't come back.
    I have tried resetting to factory settings.
    Cleaning the jack with a clean dry toothbrush.
    Any ideas???
    I thought I would try getting help here before going to the apple store.

    From your description it appears that the headphone jack is bad. You can make an appointment at the Genius Bar of an Apple store to hear what they have to say.
    If Apple can't clean out the jack, they will exchange it for this price.
    Apple - Support - iPod - Repair pricing
    Likely not worth it for a 1G iPod. Thee a thrid-party place that is less expensive.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for

  • What should I do when iTunes won't let me redownload a song I previously purchased?

    I have previously bought many songs and some of them aren't displayed as "purchased". When I manually try to find them in iTunes, they appear as if they have never been purchased before. HOWEVER iTunes does offer "Complete My Album", which is extreme

  • How to retrieve images from the file system in Portal Forms?

    Portal 3.0.9.8.0 In a Portal form , there is a field named ID wherein a value is entered. Say the value entered is 5 , how can we get the image named 5.jpg from C:/images/ folder and get it displayed in the form ? The images are not stored in the dat

  • Event case: number of runs of a single event ?

    Hi everybody, I'm working on a CCD acquire system, and I developed the control software using an event structure. Every event controls a setting function for my system, and placed in timeout event fucnctions to get the status of my detector. Data acq

  • Where is My Ringtone?

    So I made some ringtones from iTunes. I made them fine it was easy. But I synced my phone and they didn't show up when I tried to assign them to a contact. Is anyone else having trouble?

  • Having trouble sharing my folio with a client

    I'm having trouble sharing my folios with clients.  I clicked the share button and sent the e-mail to the client.  They received the e-mail and signed up for an adobe account.  When they try to log into Adobe Content Viewer on their iPad using their