Mistakes between APC 2009- end and 2010-start

Hi experts,
I found a lot of assets, where are mistake between APC transaction Year-end 2009 and APC transaction Fiscal year start 2010.
I recalculate value for one of them and is OK.
I have more assets with mistakes between 2009 mand 2010. I haven't knew causes. I found that for transactions -retirement, transfer are mistakes, but generally I don't know how correct them. Is it everything?
Do you know report showing date, which weren't correctly carry out from 2009 to 2010 ?
Rgds Stenwa

Hi,
if you repead the fisca year change, the values will be forwarded.
Question is if the fiscal year 2009 open?
If yes follow the steps from note 619969:
o RAAFAR00
o RAPOST2000
o RAPERB2000
o RAJABS00
If the fiscal year 2009 is closed and can't be opened:
A workaround which is not quite correct from the legal side ist the
report RACORR20_A from note 29694.
regards Bernhard

Similar Messages

Difference between Release call, End and Termination node in ICM

Hi all,
Can anyone let me know the clear difference between Release call, End and Termination node in ICM and in which situations we should use these nodes.
Thanks.
Regards
Deepak

Check this, hope will be helpful.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ipcc_enterprise/ipccenterprise7_0/user/guide/ipce70sg.pdf
Sent from Cisco Technical Support iPhone App

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Best way to move date between LabVIEW 7.1 and 2010

We have a large LabVIEW based control and data acquisition system that for reasons beyond the scope of this post is at and needs to stay at LabVIEW version 7.1 for the forseeable future... We are soon to add a camera diagnostic to this system that, again for reasons beyond the scope of this post, needs to be written in LabVIEW 2010... The 2010 piece of code will run and need to receive some information such as shot number, when to trigger, etc. from the 7.1 side of the system... Then after a shot has occurred and a camera image has been acquired, the 2010 code will do some on the fly processing of this image and within a few seconds will need to send back some results data to the 7.1 side...
The 7.1 code uses a tag engine approach to sharing data among different codes running on different machines... I think now that more modern versions of LabVIEW use a shared variable approach... But I need to communicate as I've described above between the two versions, 7.1 and 2010 (or it could be 2011 if that would offer some advantage)...
I'm new at this moving of data between versions like this so if something could offer some advice, especially if there is some tutorial information on this topic, that would be much appreciated... Thanks in advance for any help that you might be able to offer... thanks... bob...

It really depends if your tag engine like communication approach is a home brown solution or something like the LabVIEW DSC engine. If homebrown and well written you should be able to reuse the client library part of it in newer LabVIEW versions without to many hassles. If it is LabVIEW DSC it may be a bit more complicated since the only means to share DSC tags in version 7.1 was as far as I can remember their proprietary TCP/IP tag interface, which was replaced in newer versions with he shared variable engine.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Application builder for Lab View 8.6.1 , 2009 SP1 and 2010 SP1

All 3 Versions seem to have huge flaws. With 8.6.1 When trying to build and application I get a duplicate name error and the application won't work. With 2009 SP1 I get Error 1003 broken VI when I have no broken VI's. Again Application won't work! With 2010 SP1 After the application is built for some reason lab view can no longer find the Excel sub VI's no matter how I place them in the build. And again application doesn't work. With all 3 versions the Vi's and over all programs work perfectly in the development environment. The application builder seems extremely flawed.
I would currently like assistance with 2009 SP1 problem the Error 1003 broken VI. I have reinstalled and rebooted my machine several times , tried including as much as possible in the build and still get the error about a broken VI. That works perfectly in the development environment. Please HELP?
Thank You
Attachments:
Broken VI.gif ‏8 KB

Scott,
Good afternoon, I'm sorry to hear you are having problems working with the application builder, hopefully I can help you get to the root of this problem.
What steps have you taken to try and resolve the error? This error can be caused by a variety of things. The link below details 8 potential solutions that may help resolve your error.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
I would recommend starting with these steps. Let me know if any of these solutions work for you.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

Interface between ESS front end and BAPI'S

Hi,
Can anyone tell me how the field mapping is done between ESS portal frontend to the corresponding field in BAPI FUNCTION MODULE.How it will call BAPI and return the value tothe front end.
Thanks,
Deepthi.

check this Floor plan Manager http://help.sap.com/saphelp_erp2005/helpdata/en/b4/139525380149a49c8402e22700e4ba/frameset.htm .this is
the architecture on which every application is built in ESS.
it is having three components
1.Business Component-which interacts with the backend
2.Visual Component---front end display
3.Configuration component--talks about component
Model will be created in the Business component that interacts with the backend and fetches the data.
check this link to know more about adaptive RFC model used to interact with the backend
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15
reward points if helpful

Calendar sync between iCal, Outlook 2011 and 2010 and iCloud

All,
I'm having trouble syncing calendars on my devices and I haven't been able to find a workable solution yet. I know this topic has been covered extensively, but I haven't found anything that works.
I want to be able to sync my calendars (email works just fine) between three devices: A MBP (Mountain Lion) running Outlook 2011, iPhone 4S (Calendar App) and a desktop (Win8) with Outlook 2010.
Currently, I have no problem syncing the desktop with my iPhone (using iCloud) and these events sync into iCal on the MBP. Outlook 2011 on the MBP syncs into iCal using Sync Services to the "On My Mac" calendar. All of my previous calendar entries are single events in the iPhone, Outlook 2010 and Outlook 2011, but show up as duplicates in iCal (one entry is in the iCloud calendar, and other is in the On My Mac calendar). Since I don't use iCal as my "working" calendar program on my MBP, the duplicates are fine if it works as an interface between iCloud and On My Mac.
For any new calendar items, however, I must obviously select which calendar they'll appear in. As suspected, if I select iCloud, the items all sync to iCal, Outlook 2010 and my iPhone, but not Outlook 2011; conversely, creating events in Outlook 2011 syncs via On My Mac to iCal, but not the devices as using iCloud.
It seems to me that if a rule could be made in iCal which duplicated any event from On My Mac into iCloud, and another rule which duplicated iCloud events into On My Mac, there would be complete syncing across the programs, with obvious duplications of events in iCal (which is fine by me). I'm not a programmer and I have no idea how to, or even if, this can be done.
Has anyone else found a way to make this work, or have any other solutions?
Any help is greatly appreciated.

Outlook 2011 is not compatible with iCloud, it won't work and your 'workaround' may affect iCloud clients on the same account.
Don't use 2011.

Make documents compatible between MS Word 2002 and 2010

Hi there,
I need a fix to make documents sent between Word 2002 and Word 2010 on different machines. I'd like to keep all formatting the same, i.e. preserve fonts and bullet list styles, etc. I can't seem to find anything specific that I need on a search.
Would really be a big help to find this out.
Thanks - FP

Due to differences in printer drivers (which Word uses to define the page layout) and font versions, particularly, when moving between systems, it is impossible to ensure absolute consistency in the presentation of a document on different systems.
That said, you can attain a high level of consistency if both systems use and have access to the same document template (i.e. .dot file, give that you're using Word 2002).
Cheers
Paul Edstein
[MS MVP - Word]

INHOUSDE PRODUCTION TIME AND BASIC START DATE

WHAT IS THE RELATION BETWEEN INHOUSE PRODUCTION TIME AND BASIC START DATES

Hi,
Inhouse production Time : This is the field avl in material master, where we provide No. of days required to producce a Product / Assembly. While running MRP if you use the Scheduling as " Basic Scheduling" in MRP parameters system will take the value from Material master and do the backward scheduling and find the Basic Start and Finish dates for a Order. i.e. From the Finsh Date system subtract the Inhouse Prod time and arrive at the Baic Start Date.
If you select the Lead time scheduling in MRP parameters then system will ignore the Inhouse prod time mentioned in Mat master and consider the Routing Timings for scheduling the Order.
Hope this will help you.
Regards
radhak mk

APC, Accum Dep and current book value

Dear Experts,
In the asset module i have a bit of confussion what is the difference between APC , Accum Depreciation and current book value
Advance thanks for your assistance...
Regards,
satishkumar

closing the call...

Difference between "Binding Period" and "Validity Start/End" in Bid

SRM Experts,
1. We see 2 different things, "Binding Period" and "Validity Start/End" while preparing the bid. What is the differece between these?
2. These fileds are non-editable for the bidder, while preparing the bid response. How bidder can give validity period for his quote (at header level)?
3. We see that, the bidder can specify validity start/end date at condition level. Is it not possible to specifiy a validity of the quote at header level?
GH

case1: After expiration of - binding period in RFx header:
case2: After expiration of - validity end period in RFx header:
case3: After expiration of - validity end period of RFx Response:
I created seprate documents for each cases.
I tried accepting the RFx response in all above 3 cases system did not give any error.
I tried creating the PO against the RFx response in all above 3 cases system did not give any error.
Is it correct behavior or is there any problem?
GH

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Difference between on change of and at end of :

Hi Can any one explain me what is the exact difference between on change of and at end of .
I know the basic differences.
But i would like to know in which case we can use the above two statemetns.
Suppose :
Matnr   plant       sloc       movementype      date                          qty
12       001          002           261                12/11/08                    10
12      001          002            261               12/11/08                      11
12      002          003            261               12/11/08                      12
Here i need to add the quantity based up on the material,
If the materials is maintained in different plants then it should give the total for for that particular plant.
Please help me how to build logic to this :
Regards,
Vinay.

ok sure i will give it to u.
MATNR       PLANT          SLOC            BWART           BUDAT         QTY1           QTY2           QTY3             QTY4            QTY5
127874     2501     3025     200906     201     0.000     0.000     0.000     0.000     0.000
                     QTY6           QTY7             QTY8             QTY9           QTY10         QTY11            QTY12
     0.000     0.000     0.000     0.000     0.000     0.364     0.000
127874     2501     3025     200905     201     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     7.000     0.000     0.000
127874     2501     3025     200905     202     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     1.000     0.000     0.000
127874     2501     3025     200905     261     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     35.000     0.000     0.000
127874     2501     3025     200905     551     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     0.000     5.000     0.000     0.000
Here i need to write the logic for that material usage :
This material usage will be caliculated based upon the movement types in that particular month :
The formula is :
AT END OF BUDAT.
     FINAL_VALUE_WA-KWMENG12 =   ( W_QTY261 -   W_QTY262 ) + ( W_QTY201 - W_QTY202 ) + ( W_QTY551 - W_QTY552 ).
      CLEAR : W_QTY261,W_QTY262,W_QTY201,W_QTY202,W_QTY551,W_QTY552.
    ENDAT.
Here iam writting the logic as at end of the month iam caliculating.
But what my question is if we have same material in different plant and the usage is in the same month
then i think this query is going to fail.
Edited by: vinay raj on Jul 6, 2009 2:02 PM
Edited by: vinay raj on Jul 6, 2009 2:03 PM

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

cherifrombartlett wrote:
PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION
What are you talking about? If I'm not not mistaken the iPad was released in April 2010 so there is no 2009 iPad version.
Typing in all capital letters in a forum like this is considered to be rude and all capital letters indicate that you are shouting.

PowerPoint 2010 arrows in series lines was displayed reversely between the edit mode and the slide show

I encounter a strange problem with the column chart in PowerPoint 2010 (or maybe the combinations of Excel 2010 and PowerPoint 2010). The directions of the arrows in Series Lines display in the reverse direction between the edit mode and the Slide
Show.
Here are the steps to recreate this phenomenon:
Open a new Presentation > Insert > Chart > Column > Stacked Column > Press OK
Excel pops up. Close Excel and return to PowerPoint.
Click on the chart > Layout > Lines > Select "Series Lines"
Right click on the lines and select "Format Series Lines"
Line Style > End Type > Choose "Stealth Arrow"
(well, could not paste an image yet... arrows display like <--)
When F5 was pressed (Slide Show)
(well, could not paste an image yet... arrows display like -->)
If you look closely at the directions of the arrows, they are display in the reverse directions. Anyone is having the same issue?
Thanks!
Chen

Hi，
Based on my tested both of the PowerPoint 2010 and
PowerPoint 2013, I reproduced the issue in my environment.
If I choose the End Type> Stealth Arrow(---->), it showed "<-----" in "Normal mode", but showed the "---->" in "Slide Show mode". It seems display correctly in "Slide Show mode".
We have definitely heard your frustration, and we're thinking about ways to make this scenario work better for our customers. Please wait for the issue is fixed. Thanks.
Regards,
George Zhao
TechNet Community Support

Mistakes between APC 2009- end and 2010-start

Similar Messages

Maybe you are looking for