MITI Integrator for Erwin 4.1 - Physical Model does not import
Hello,
I'm running the MITI integrator in BOMM 3.0 for Ewrin 4.1
I'm using an ER1 file that contains both the Logical and physical data model.
When i explor the data in BOMM Explorer, i can only see the Logical model. There is a loose link to the physical model in the Technical Name field - but this does not seem to be completely accurate. It looks like the integrator just takes the Logical name and replaces spaces with underscores. This works in the following example where the logical name and physical name are essentially the same:
Logical name: Customer Names
Physical name: customer_names
Technical name (parsed?): customer_names
In the above example BOMM will generate a same as relationship between tables called customer_names and the Logical table "Customer Names". this is what we are hoping to see.
The following example is where the problem occurs.
Logical Name: Customer Names
Physical Name: cstmr_nm
Technical Name (parsed?): customer_names
In the above scenario, BOMM is no longer able to draw the relationship from the logical name to the physical name.
As I stated at the beginning - it seems that the Integrator is only importing the logical model and then parsing the technical name out of that - we are using an NSM file to convert common terms to erwin standard abbreviations and we were wondering if the ingtegrator could leverege this file in some way.
Hello,
I'm running the MITI integrator in BOMM 3.0 for Ewrin 4.1
I'm using an ER1 file that contains both the Logical and physical data model.
When i explor the data in BOMM Explorer, i can only see the Logical model. There is a loose link to the physical model in the Technical Name field - but this does not seem to be completely accurate. It looks like the integrator just takes the Logical name and replaces spaces with underscores. This works in the following example where the logical name and physical name are essentially the same:
Logical name: Customer Names
Physical name: customer_names
Technical name (parsed?): customer_names
In the above example BOMM will generate a same as relationship between tables called customer_names and the Logical table "Customer Names". this is what we are hoping to see.
The following example is where the problem occurs.
Logical Name: Customer Names
Physical Name: cstmr_nm
Technical Name (parsed?): customer_names
In the above scenario, BOMM is no longer able to draw the relationship from the logical name to the physical name.
As I stated at the beginning - it seems that the Integrator is only importing the logical model and then parsing the technical name out of that - we are using an NSM file to convert common terms to erwin standard abbreviations and we were wondering if the ingtegrator could leverege this file in some way.
Similar Messages
-
Data modeler saving Physical model changes not saved
I am using version 2.0.0.584.
The bug fix list contains: 8722310: Save does not save physical model changes
Hovever I still see unexpected behaviour.
I created a physical model for "Oracle database 10g" and allocated a couple of tables to a different tablespace.
I saved the physical model via Physical model--> right mouse button --> save all.
I saved the model with File--> save
I close the model.
After opening, the physical model is not available anymore.
After Physical model--> right mouse button --> open (for Oracle 10g) the contents are not the same anymore.
Tablespaces with name "TableSpace3" and "TableSpace4" are added and objects belong to this tablespace.
We do not have currently a workaround for this behaviour.
Can anyone help?
Thanks
Edited by: 793016 on 06-Sep-2010 03:10
Edited by: 793016 on Sep 6, 2010 12:14 PMHi Philip,
default tablespaces were defined and I removed this. It did not have a positive effect.
Checking the log files was a good idea.
The log file contained errors about files which could not be found on the system.
I will do some additional tests and let you know.
Thanks.
Kind regards,
Maurice -
Azure - The name 'model' does not exist in the current context
I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0103: The name 'model' does not exist in the current context
Source Error:
Line 1: @model Web.Models.LoginViewModelhi,
From the error message, it seems like a MVC issue.
I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
and
Razor View throwing “The name 'model' does not exist in the current context” .
And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
City Model does not display towers
Hi Experts
Anyone had this issue? Since applying the last OSS 2089805 - SP12: iCI Config App , my City Model does not have any data in the 'tower' section.
The data must be there to display in the headings so what has happened to the centre section?
Thanks
IanHi Thomas
Thanks for the advice. I have opened up an OSS note last night for this - 0000265077
So I should always call CCLM as a transaction from the backend rather then go direct to the browser? I don't tend to ever use the workcentre approach.
I've followed your instructions and the result is the screenshot below:
The GET of the GraphValue return ok and I have then called this in a separate window to see the contents. See below:
I'm not sure which part of this I need to inspect though so determine if the data is being sent correctly to the graph. Can you help with this?
Also, I've just seen a couple of warnings so included these below. Do these have any bearing on the towers not being shown?
Thanks
Ian. -
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name; -
I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy -
When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox openedtry
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
The home button for my ipod touch 4th generation does not respond all the time, What do I do?
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to
it is a windows 8
-
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?
I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........
-
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Value Misc. Allowance for the flexfield segment Expense Type does not exist
Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay SharmaCheck these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks -
Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.
Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444
Maybe you are looking for
-
Hi I was trying to delete a row in one of the tables in the database and i got the following error: ORA-00600: internal error code, arguments: [25027], [8], [1], [], [], [], [], []Also i got a message in OEM as follows: ORA-error stack (00600[25027])
-
I am migrating from my old XP PC to a new Windows 7 PC running Firefox 4.0.1. I have managed (I think) to copy my cookies, passwords & permissions (i.e. cookies.sqlite, key3.db, etc) via an external HDD to the new PC and copied them into the Firefox
-
Where's the navigation element in Dw6? Or how do I create one for a new site?
I can't find the navigation element in Dreamweaver 6
-
Birthdays not syncing in iPhone after IOS 4.3 update
I have tried numerous approaches to fix this problem without any resolution. I searched the discussion for answers without any success. So, I am posting this plea in hopes that some one will help. I keep my contacts on my iMac in address book. Also o
-
Adding racks/nodes to parallel data warehouse v2
Hi, Wondering what the mechanism is for redistributing data among nodes when you add a rack to PDW V2. Recall the way mentioned to do it was backup and restore in V1 and didn't see anything new discussed on the topic at pass 2012. Thanks.