Mix formCalc and javascript in same event?

Hi Folks,
I have a bunch of formCalc and Javasript I'm trying to merge (two different forms, different programmers). Is it possible to mix javascript with formCalc in the same field event? If so, how?
thanks!

No, it is not possible to mix FormCalc and JavaScript in the same event. You will get run-time errors.
Steve

Similar Messages

Mixing lineseries and columnseries in same chart

I am trying to combine a lineseries and columnseries. It works, but the columns are only 1 pixel wide which looks really ugly. If I increase the stroke width, the columns use rounded corners which don't look right. I would like to set the width to something like "percent of available space" so like 50% because the chart can be dragged and expanded and the columns should adjust to the overall width of the chart and have the columns draw like normal without rounded corners.
Secondly, The line points are drawn in the middle of the columns. I've tried setting the offest of the columns to -50 like it says in the documentation so that the columns are dran at the beginning of their available space, but this does nothing either. I have to write this in Actionscript and here's some snippets of what I'm doing.
var genericChart:CartesianChart = new CartesianChart() // I've tried LineChart and ColumnChart as well, nothing works
var lineSeries:LineSeries = new LineSeries();
stroke.weight = 3;
lineSeries.displayName = ser.name;
lineSeries.setStyle("lineStroke", stroke1);
seriesArray.addItem(lineSeries);
var columnSeries:ColumnSeries = new ColumnSeries();
columnSeries.offset = -50;
columnSeries.setStyle('stroke', stroke2);
columnSeries.setStyle("fill",stroke.color);
seriesArray.addItem(columnSeries);
genericChart.series = seriesArray.toArray()

So, what camera do you "normally shoot in 720/60p (for slo-mo purposes)?"
That would be an important factor to know. Interframe or intraframe?
What sequence settings?
How have you transcoded?
Is this AVCHD?
This is basic to learning how to respond?
There are many cameras that shoot in a variety of formats, codecs, etc that are identical what you have stated.

Workflow sending 20 email notifications every one hour for the same event

Hi Experts,
We had an issue on a clientu2019s prod system that the workflow triggered the same event 20 times in one hour. Later, a client has resolved the issue by removing the information from the workflow administration and reentering it back again. The workflow administration contains email settings, web settings, workflow roles, and active workflow maintenance. Although, the issue has been resolved but a client still needs to know how that happened. I would like to get some helpful opinions on how this happened because I am very new to the workflow. I would really appreciate your opinions.
Thank you
Don P.

Hi Sue,
Thank you for your response. I am not sure if the event has been triggered erroneously. The client told us that it didn't happen in the dev system when he tested it, but it only happen in the prod system. This project went live a little bit over a year ago without any issues, but it just happened the first on 6/22.
The event is about to notify the user to review a new incident report (EHS), and it's same event id for all 20 email notifications. We will a client to look into their system about how this event raised?, what does the event log reveal? and if he uses the event queue. Again, thanks for your response.
-Don P.

Mix published and unpublished events in one calendar?

Just got an iPhone.
Is there a way to mix published and unpublished events in one calendar?
I've heard that other calendar software have this option.
With iCal on a Mac it's possible to choose which calendars to view, so then it's not a problem to have one published and one unpublished calendar.
But with iCal on iPhone you can only choose between viewing ONE and ALL calendars.
I subscribe to a bunch of other peoples calendars, so viewing ALL is never an option..
So now I would like to write all my events, published and private, into ONE calendar. Is that possible?
Anyone?

Yes. I tried changing the setting to Sync All Events (instead of the time limited sync) and let it refresh. No change. No display
I also tried rescheduling the event by one hour on the same day (no other changes), then save. No change. No display.
I ended up deleting the events and re-entering them, with identical information (including the recurring end date, remarks, etc., you name it), and then the events appeared like the rest of them in the same calendar.
I'd still like to know if there is a solution to the original problem. I'm still concerned that other events, maybe in the other calendar as well, are no appearing and it's impossible to rely on a sample or to verify every event.
Thanks for your assistance.

Mixing public and private networks on the same switch

Hello Everyone,
I know this may get some security engineers in frenzy but wanted to know if there is a safe way to mix public and private networks on the same switch.
We have many remote offices that we want to add public wifi and a couple of other services that would be completely outside of our internal network. Each office has a 3750 with plenty of open ports. How can I safely create a vlan for public access on these switches which currently have our internal network on. I have read that people are doing this to save on the cost of purchasing a dedicated switch. Some people are using access lists and one person mentioned creating a private vlan for the public network. I looked up private vlan and it seemed bit confusing.
Is this recommended? If not what would be the safest way to do this?
Thanks Everyone

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
How "safe" is relative. If your running just one VLAN on a switch, that's would be the safest (basically the same as mixing traffic on the same wire - separation is done else where).
If you multiple VLANs on a switch, then you need to determine how likely someone might figure out a way to breach the VLAN barriers. (This isn't so easy on newer switches.) If the VLAN isolation is breeched, then you need to examine what does that imply from a security perspective (for example can someone now inject or receive other VLAN traffic).
For most purposes, I don't see mixing public and private VLANs, alone, on the same switch as much of a risk. More of a concern is what can be reached on either VLAN and how well it's protected.

How do I get videos and pictures taken in the same event to show in a slideshow in the order they were taken?

How do I get videos and pictures taken in Photos and the same Event to show in the order they were taken? Pictures and videos are seperated with videos at the end of both Photos and the Event.

You're welcome.
What's likely happened is that when you transferred the video to the new machine they lost their dates.
Photos use the Exif metadata to record the date and time of the shot. This is quite different from the date and time of the file, which can change as the file is copied from place to place. Video doesn't have Exif, and so iPhoto uses the file date, and that's changed.
Simply, there's no absoultely reliable way to date video.
Try assign dates with the Batch Change command under the Photos menu.

Handling User Events in sub panel vis and main vis with same Event reference Number.

Hi All, Iam trying to work to handle events in both subpanel vi and main vi.
I have a main program, and 2 sub vi. I will load the sub VI in 2 sub panels in main vi. Each sub pael vi has controls on it.
I have created 2 User events for 2 sub panels vi. One user event consits of a Cluster with 2 Booleans (x & Y) and Other User Event consists of cluster of 2 unsigned 8 Numbers (a & b). These are created and registered in the main Vi and event register refnum is passed to the subpanel vi from the main panel vi.
I have Event structure in main panel and sub panel vis.
In one sub panel vi, When the value of one boolean(i.e. X) in the clusters changes, the Events structure in sub panel vi should perform some operation in sub panel vi only. When the value of other boolean (i.e. Y) changes it should perform some operation in main vi. I will try to Generate user event with the x value and Y value changed based on the control clicks in the sub panel vi.
The OTher panel vi should behave in the smae way when the a & b value changes.
The "Generate User Event" is working fine some times and sometimes there in no event triggered in the sub panel vi or main vi.
Please let me know what is the problem Ramesh.

There is a lot of talking, but not much understanding. It'd be better if you posted some example VI's of what you are trying to do so that the words will make sense.
One thing I can tell you is that you don't want to have two event structures handle the same event reference number. You want to have two event registrations with each one going to its own event structure.

Problem of Java - javascript and javascript - java communicate of same obje

Hi all,
I have met a great problem in program an applet! I have tried to communicate between java and javascript and javascript and java in the same page by using jsobject. However, problem occur. It is not a problem to call javascript from java by using jsobject. However, javascript call java by using document.object.function has problem. It cannot find out the object in IE. I have followed the webpage show in java, but the browser still prompt me the object called client not find. Please help!! My html code is shown as follow:
<HTML>
<HEAD>
<TITLE>Alva Final Year Project Demo</TITLE>
</HEAD>
<Script language="javaScript">
function show(html){
layer.innerHTML = html;
function getResponse(response){
alert("response: " + response);
document.client.getJSCommunicate();
</Script>
<BODY>
<DIV id="layer" style="position:absolute">
<H2>Secure Server</H2>
<HR>


<OBJECT id="client" classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = "800" HEIGHT = "400" codebase="http://java.sun.com/products/plugin/1.1.1/jinstall-111-win32.cab#Version=1,1,1,0">
<PARAM NAME = CODE VALUE = "ClientPart.class" >
<PARAM NAME="SCRIPTABLE" VALUE="true">
<PARAM NAME="MAYSCRIPT" VALUE="true">
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.1">
<COMMENT>
<EMBED type="application/x-java-applet;version=1.1" java_CODE = "ClientPart.class" NAME = "client" WIDTH = "800" HEIGHT = "400" pluginspage="http://java.sun.com/products/plugin/1.1.1/plugin-install.html"><NOEMBED></COMMENT>
</NOEMBED></EMBED>
</OBJECT>


</DIV>
</BODY>
</HTML>
Thanks your kindly help.
Alva

Everthing looks fine to me from here, you should be able to just call the java function direct such as
document.myAppletObj.doMethod();
I think your problem could be that your object is called "client". IE can get funny about names, it didn't like me calling a method delete()!!
Try adding something else to the name such as "my_client", and see if this works any better.
Chris

ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX

How to play stereo mix music and sing in my mic at the same time?

Hi guys, need help regarding Realtek HD audio driver
I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
I'm using XP...Toshiba Satellite S4747 laptop
In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
Any solutions plzzz thxxxx
On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
I think your microphone is set to mute so check this.

I've just updated my iPhone 4 and now cannot add events in iCal. Anyone having the same problem? Thanks!

I've just updated my iPhone 4 to 5.0.1 and now cannot add events in iCal. Anyone having the same problem? Thanks!

The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote co

I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote count. Is this possible?

I ended up reformating the drive as FAT32 because I still need to use it on my Windows 98SE system also. I did have a problem with the allocation size. I wanted to use 512 bytes but it kept failing so I used the default size(8192 bytes) and then it worked fine. I didn't think there would be a problem formatting as NTFS but since you are having problems I just tried it. It failed at 512 bytes allocation size so I tried again using 4096 bytes, the default, as the allocation size and it failed again. It looks like these drives will not format as NTFS.
Also, I think I figured out what's going on with the ReadyBoost problem. As I said initially it wouldn't work with ReadyBoost then after I had 12GB of data on the drive the ReadyBoost feature started working. After I deleted all the files it quit working again. After doing some reading on the net about Flash drives and ReadyBoost problems it appears that the memory chips on my Lenovo Flash drive are mixed with both fast memory chips that work fine with ReadyBoost and slower memory chips that are too slow for ReadyBoost. Apparently, after I fill up the portion of memory with data that uses the slow chip(s) then ReadyBoost works fine with the fast chip(s). I also verified the Flash drives read and write memory speeds using Vista's Event Viewer. To work with ReadyBoost the Flash drive has to read at a minimum of 2.5MB/s (for 4KB random reads) and write at a minimum of 1.75MB/s (for 512KB random writes).
Let me know what you find out.

Javascript error in event handler! edge 4.0.0.js, what to do about it?

Site
Hello everyone. I get an error in my chrome cosole, what can I do about this?
I dont have this problem in all browsers, just in chrome, and in some versions of Firefox.
The problem occurs when I click any label in the iframe (see website, speaks for itself).
line 5838 window.console.log("Javascript error in event handler! Event Type = " + eventType);
does anyone know how to fix this?
And why do I only have this problem in some browsers?

I basically want the labels in the Iframe to make the parent page animate to a specific anchor tag.
ps. This is what I posted on the jquery forum as well:
I tried to do this by letting the iframe .trigger a .click to a button on the .parent page.
I did this in two ways.
one: the click is triggerd in (/by) the iframe
two: the click is triggerd by a script in the parent window, that script is launched by the iframe
Here's the thing:
this is what one of the <a>'s that the iframe will click looks like:
<a class="nonblock nontext anim_swing" id="u185" href="index.html#contact"></a>
The code is generated by adobe muse which has a function to smoothly scroll to a location on the page, and I am guessing the "anim_swing" class takes care of that.
I would like the colorful labels in the iframe to do the same thing as the <a> above.
and it works in some browsers on some computers but somehow not on all of them (with method two the adblocker doesn't seem to be an issue ).
I also tried to let the parent page scroll directly with the jquery .scrollto function. That did not work either (see the jquery forum).

Best strategy for dealing with a mixed library and missing photos

Looking at the package contents of my iPhoto Library, it appears that I have a "mixed" library (i.e. part managed and part referenced). I'm not sure how this happened--I originally created this library about three years ago when I first bought my Mac with iLife '06, then later upgraded to iLife '08 which I'm currently still using. Maybe the default setting was to have a referenced library in iPhoto '06? Don't know. I don't recall ever changing this setting.
Anyway, I was starting to manually recover some missing photos but it just occurred to me that iPhoto is simply updating the aliases to point to the photos I'm telling it to use, and not actually copying the photos into the library (I'm guessing that only happens when you import a photo). This is not what I want. I want my library to be completely managed. I understand that, as my current Preferences settings dictate, any new photos I import now will be copied into the iPhoto Library. But for the existing photos that I am able to recover, I don't want to have to keep the originals outside of iPhoto.
I read in another topic about an application called AliasHerder and I'm thinking of trying that. The problem is, I no longer have original copies of all of the missing photos. I can recreate the folder structure for some of them but not all. I'm not sure what this will do to my iPhoto Library (I have emailed the vendor for clarification). I'm wondering if I'll still end up with a mixed library containing aliases that point to a non-existent file. Perhaps someone who has some experience with the tool could enighten me.
Based on suggestions given to me in previous posts I made, I tried both rebuilding my iPhoto Library and using the iPhoto Library Manager tool. Neither of these produced the results I had hoped for. Am I better off just starting off from scratch and creating a whole new library? And if so, what's the best way to get all of the existing photos from my current library to the new one? Do I export them out and then import them into the new library? Is there any way to salvage events, albums, etc. from my existing library or will I have to recreate these in the new library?
Thanks in advance!

First check iPhoto's Advanced preference pane to make sure you're running a "managed" library.
Click to view full size
Since you don't have the "source" photos available to relink to your best bet, IMO, would be to continue using your current library and delete those missing photos from it whenever you come across them in day to day use. If you click on the thumbnail of a missing photos and drag it to the iPHoto trash and empty it that will delete it from the library. This way you will retain all of your organizational efforts, i.e. albums, books, keywords, etc.
When you rebuilt with iPhoto Library Manager what did the resulting library contain? If it contained your photos without the missing photos you could use it. You would retain your albums, keywords, faces, places and other metadata. You will lose any keepsakes, i.e. books, slideshows, cards, etc.
Or, you could start over as follows:
Creating a new library while preserving the Events from the original library.
1 - Move the existing library folder to the desktop
2 - Open the library package like this.
3 - Launch iPhoto and, when asked, select the option to create a new library.
4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
You will end up with all your photos (no missing photos) in the same events as in the original library. But there will be no albums, metadata or keepsakes. It's for this reason I made the original suggestion of continuing with your current library above.
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Formguide and javascript inside a pdf

Hello,
I´m trying FormGuide. I realize that the behavior of the script inside an event in a pdf/template is different when the pdf is opened directly in acrobat reader or when is opened using a formguide (preview pdf).
For instance, if I have 2 javascript alerts on the change event of a field, only the first one will be shown when the value of that field is changed in formguide.
Another example: if at the same event I have a javascript replace funcion, when I change the field in the guideform, the event is fire as expected, but I will get an xfaxm error message...
I thought formguide would only make a mapping between the field in the flash screen with the field on the form, but that everything else would run inside the form. However, it seems formguide is "capturing" the events and script and is running them...
If this is true, how can I define something like a replace function?Also, How can I use floating fields in a pdf, that will be changed as some field in formguide changes?
Thank you

You have a number of issues that you have brought up here. This are difficult without looking at exactly what you aer doing and what script you are running. Can you post your form to [email protected]?
I will try and answer your questions:
The replace() is supported in Form Guides
All script will run in the Form Guide unless you call into the PDF directly (liek when you click the buttons to email, or print)
Floating fields are resolved at runtime and are turned into Text. They are not inetractive.
If you are trying to get script to execute in only your guide you can use:
if ( xfa.host.name == Flash ) {
script to execute.
And of course you can do the not (!=) to only execute in Reader/Acrobat.

Mix formCalc and javascript in same event?

Similar Messages

Maybe you are looking for