MM Step by Step Flow with T-Codes

Hi Gurus,
I am a PP consultant would like to know MM Step by Step Flow with T-Codes.I have also gone throw some documents/Threads from SDN but needed more clarity.
For Ex in PP the flow would be as below,
Step#     Description of Activities                         T-Codes
1     Creation of all Material Masters                     MM01
2     Creation of all Bill Of Materials                     CS01
3     Creation of Cost Element                         KA06
4     Creation of Activity Types                         KL01
5     Creation of Cost Centre                         KS01
6     Change Activity Type Price Planning                    KP26
7     Creation of Standard Value Parameters                    OP7B
8     Creation of Standard Value Key                    OP19
And goes on...
Similarly i want the flow of MM.
Request your support regarding this.
Cheers,
Kumar,S

Hi,
MM flow:
Create purchase requstion              ME51
Create request for quatation           ME41
Maintaion the quatation from differnt vendors ME47
compare price comparision               ME49
Create purchase order & send to vendors ME21N & ME22N
Goods reciepts                  MIGO ( in case of service PO ML81N for SES)
Logistic invoice verification   MIRO
For more check the link:
http://help.sap.com/saphelp_erp60/helpdata/en/75/ee0a7655c811d189900000e8322d00/frameset.htm
http://www.sap-basis-abap.com/mm/mm-flow-with-step-by-step-process.htm
Regards,
Biju K

Similar Messages

Wm flow with t.code

hi sap guru
i am very new in wm ,i just want senario in wm with t.code for example in MM module we first creat PR than PO ,MIGO and MIRO
and explain the flow what is putaway strategy and other

Hi,
Check out the below link
[Re: WM process flow diagram]
If you want it to learn the module completely with all the scenarios. Follow the below (always recommended)
[http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm]
Request you to go through the the forum especially when posting basic doubts beacuse there are lot of threads available with basic WM flow, tcodes, config details.
Thanks & Regards,

Sub-contract process with T.codes..?urgent

Hi
can anybody explain me ,
what are all procedures to be followed to carry Sub-contract process with T.codes.
From sub-contract PO to Subcontract challan output
Explain me step by step process with t.codes
Thanks
sap-mm

Hi,
Sub Contracting Process with t.codes are:
(1) You have create material in MM01(Finished Goods ,mat type FERT) that can be procured externally, and you have maintained BOM (CS01) with components (Raw Materials , Mat type ROH). Any waste generated as scraps or by products received during subcontracting process can be maintained as component with negative quantity or in % basis in the BOM in CS01.
(2) Create a subcontracting PO (ME21N, Item Category L). Maintain Purchase Info Record (ME11)for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components(Raw Materials) for SC PO(In ME2O directly or by MB1B with 541 Movement type). Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor" .So no accounting document generated by supplying raw material to Sub Contracting Vendor.
(4) You receive (MIGO) finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
FG BSX acc. Debit Acc.
GR/IR Cle.acc. WRX acc. Credit Acc.
FRL Acc. Debit Acc.
BSV acc. Credit Acc.
BSX acc. of components Credit Acc.
GBB - VBO Acc. Debit acc.
PRD acc. Some time Credit &
Some time Debit
(5) Invoice Verification (MIRO) for SC Invoice.
(6) Payment in F-53
If you are activate Price Diff. Acc. for SC-Vendor in....
OLMB -
> GR -
> Price diff. acc.for SC order while you do GR for your Plant......then Price Diff. Acc. also will be trigered...
Regards,
Biju K

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Step by step file to rfc with rfc code

hi
any body can u provide me file to rfc step by step method to practise
file->i am getting employee number from txt file.
RFC-> inserting into to one table
w/o BPM i need it is there anybody can provide me, i am searching it for almost 2 days. Please help me

Hi Mudit,
Could u please provide me simple step by step methods File to RFC scenarios url's or any materials.
Acutally i created this but i am not getting eny errors and results also. Please provide me.
what i have done is
from text file i am getting employee number and thru RFC i am just inserting that employee number into Ztab_RFc table. but if i run RFC in r/3 its getting inserted but thru XI RFC is not getting inserted what might be the exact problem, in msg_monitoring and sxmb_moni i am not getting errors. Please provide me solutions to cross check only i am just asking the step by step flow sir

Step by step procedure with scren shot for BAPI?

Hi,
could u tell me the senario for bapi in real time ?
how to do in realtime ?
any body tellme the step by step procedure with screen shot pls could u help?
i will be waiting for reply.
rehards
eswar

Hi
what is BAPI?
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
see the sample code
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE
Reward points for useful Answers
Regards
Anji

Webdynpro ABAP & JAVA step by step example with screen shots

hi experts,
i am new in webdynpro. i want to learn webdynpro so any one plz help me how to create,how to install,connect,and how to execute plz send any documents for webdynpro ABAP & JAVA step by step examples with screen shots.it's really helpful for my carrier.
thanks and regards,
sapbbm.

hi bala,
check out this URL you have 41 sample codes and PDF of Webdynpro for JAVA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Thanks
Gopi

What are the steps to optimise ABAP code

What are the steps to optimise ABAP code, that is how to increase the performance of a code?

Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Reward points for useful Answers
Regards
Anji

Process step by step for creating Tax Code ?

Dear All ,
                        Kindly provide me step by step manner to create tax code in FTXP , I need each & every single step which is to be used to create a tax code , pl it is urgent , for ex. i need to know that what is filled in target tax code , EU Code , check id ( why it is checked ) etc .
sap11

Hi,
Transaction: FTXP
This area gives you a step by step explanation on "how to create a tax code in SAP". Later on these tax codes must be used in the creation of condition tables such as for MWST.
Go to transaction code FTXP and select the country for which you need to create a tax code. This country is automatically linked to the Tax Procedure which has been set up in the menu path [IMG - Financial accounting - Financial accounting global settings - tax on sales/purchases - basic settings - Assign country to calculation procedure]. Enter in the field tax code. This must be a 2-digit alphanumeric code i.e. A5, 55, BB, etc.. Before SAP 4.5 (I believe) you could use other special characters such as @, ? etc... But this is no longer applicable. See OSS note 212806.SAP will ask you to complete other additional fields such as:
description of the tax code: please give a clear description
define the tax type: define whether the tax code is relevant for input or output tax
Indicator which determines that an error message should be issued if the tax amount is not correct. It it recommended to flag this.
Eu code: One of the most forgotten parameter. If you do not set this parameter at "1" then all transactions with this code will be not picked up in the ESL listing of that specific country. This code "1" represents all the Sales from one EU country to another EU country.
The target tax code fields are used in case of deferred taxes. This is applicable for example in France. The VAT needs to be paid for example not when the invoice is issued but when the customer pays the VAT. There are here again special programs available in SAP for deferred taxes.
Reporting country: this field needs to be completed when you are using the plants abroad functionality. This means that when you as a German company have a Belgian VAT number and you have sales in Belgium (+ you need to submit a VAT return in Belgium) , then of course these invoices need to be booked in SAP with a Belgian tax code.
Further in the menu you can also allocate the amount where this specific tax code is used to a certain tax account. The tax type fields such as Base Amount, Input tax, Output Tax ... can be determined via the calculation procedures. Calculation procedures are defined in the IMG at [Financial accounting - Financial accounting global settings - tax on sales/purchases - basic settings - Assign country to calculation procedure]. Here you will need to define also the calculation levels. For example the Output tax is level 125 and the output tax will be calculated on the basis of the base amount. Therefore you put for the output tax in the field "from level" 100. The level of Base amount is 100. You do the same for the others.
Account Keys.
NVV: The non deductible VAT is automatically added to the expenses account
NAV: Indicate for this key a separate account for the non deductible VAT
ESA: Output tax in case of Acquisition of EU goods
ESE: Input tax in case Acquisition of EU goodsLast but not least you also need to complete the tax rate field.
Tax Percentage & GL Account assignment
       Tax percentage can be maintained in two ways & that depends upon the Tax procedure that has been followed i.e. if tax procedure is formula based then percentage can be maintained in FTXP only, where as if the procedure is condition based then percentage has to be maintained under the identified condition type.
Once done GL accounts has to be assigned under OB40 for automatic posting of tax amounts.
Reward points if helpful,
Regards,
Archit

Error in NetWeaver CE 7.1 Installation: Step importJavaDump with MSS 2005

After a dozen unsuccessful tries to install SAP NetWeaver CE 7.1 onto a Windows platform using the Microsoft SQL Server as the backed I could use help regarding this particular error.
I receive the following error when I try to install the software with MSS as the backend:
ERROR 2008-09-29 10:40:02.319 [sixxcstepexecute.cpp:944]
FCO-00011 The step importJavaDump with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|11|0|importJavaDump was executed with status ERROR .
The error occurs only with MSS. I have both my Windows and MSS updates up to date. When I use MaxDB as the backend everything goes nice and smooth (even the java info dump, or whatever that command does). When I use Microsoft SQL Server as the backend this error is printed. I have tried with Microsoft SQL Server 2005 Developer Edition on both Windows 2003 Server and Windows XP Professional SP3.
The following gets printed to jload.log:
29.09.08 10:39:49 com.sap.inst.jload.Jload main
INFO: Jload R 7.10 V 0 A 0
29.09.08 10:39:49 com.sap.inst.jload.Jload main
INFO: Jload -sec CE2,jdbc/pool/CE2,C:/usr/sap/CE2/SYS/global/security/data/SecStore.properties,C:/usr/sap/CE2/SYS/global/security/data/SecStore.key -dataDir C:/Work/Temp/51033845_NW_CE_7.1_Workplace_32-bit\DATA_UNITS\CE71_05_JAVA_JDMP -job C:\Program Files\sapinst_instdir\CE71_DEV_MSS\INSTALL\IMPORT.XML -log jload.log
29.09.08 10:40:02 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
29.09.08 10:40:02 com.sap.inst.jload.Jload logStackTrace
SEVERE: com.microsoft.sqlserver.jdbc.SQLServerException: The connection to the named instance has failed. Error: java.net.SocketTimeoutException: Receive timed out.
 at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.getInstancePort(Unknown Source)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
 at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
 at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
 at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
 at com.sap.sql.connect.datasource.DBDataSourceImpl.getConnection(DBDataSourceImpl.java:105)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:202)
 at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:109)
 at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:153)
 at com.sap.inst.jload.Jload.main(Jload.java:702)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
29.09.08 10:40:02 com.sap.inst.jload.Jload printErrorInformation
SEVERE: An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
For one thing, there is no SAP note 942766 when you search for one at SAP Notes. Another thing that is particularly interesting is that the SQL JDBC driver does not get the SQL instance name, or at least does not print that to the exception message but instead leaves there two whitespaces (The connection to the named instance >>Instance name should be here<< has failed).
Any suggestions on how to get pass this error? All help would be appreciated!
Best regards,
Sven

hello,
please check and ensure that:
- your database server is started.
- your database instance is running and you can connect to it through the network interface
- the entries in secure store contain the correct options for
connecting to the database. (These can be checked via configtool and this only applies to the case when JLoad is run using secure store parameters)
hope this helps
kr,
andreas

Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

Step in with a NavigationConnector

Hello,
the recommended way to add a Navigation from other sources is to implement a NavigationConnector, explained in:
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f784be16671bf0e10000000a11466f/frameset.htm
There are two questions I could not find an answer in the documentation or other threads I read in the forum/weblog...
1. How can I use only(!) my specific NavigationConnector in a Navigation-iView using the Navigation Taglibrary and not all available ?
2. Is it possible to add nodes from my own NavigationConnector to a node from the NavigationService dynamically ?
Actually I like to step in with my own navigation in the PCD-based navigation in a deeper level and not at the TopLevel....
Any hint will be helpful !
Tim

Hello Daniel,
thanks a lot - with this answer the first problem will be solved.
Sorry for explaining the second point not clearly.
Another try to show how I like to merge the NavigationConnector.
I think about this structure of navigation:
A - ROLES://
    A1 - ROLES://
    B2 - ROLES://
B - ROLES://
    B1 - ROLES://
    B2 - ROLES://
C - ROLES://
    C1 - ROLES://
    C2 - ROLES://
         C21 - MyPrefix://
         C22 - MyPrefix://
         C23 - MyPrefix://
At C2 my own Navigationconnector should start.
The best thing would be, if I could use the default Detailed-Navigation-iView
without programming an own Navigation-iView.
I like to implement my own Content-iView, put it at position C2 and then
from this point the navigation derives from my own NavigationConnector.
I'll hope you have got a better pciture now...
Tim

FCO-00011 The step ExeProcs with step key

Hi Seniors,
I have tried to install SAP ERP ECC 6.0 IDES ERP2005 SR3 , I got the error in installation step 19/26 (Create SAP Stored Procedures).
OS : WIN 2008 SERVER
DB : MS SQL 2008
I have fallow the Note 1152240.
Error log :
ERROR 2010-03-02 12:08:20.282
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
Please help me,
Thank you,
Sagar K

Dear Markus,
In that log also same error message,
=============================================================================================================
WARNING[E] 2010-04-23 19:46:55.288 [syxxcfstrm.cpp:406] CSyFileStreamImpl::open() FSL-02015 Node /db2/db2SM1/.dbsrc.sh does not exist.TRACE 2010-04-23 19:46:55.307 [iaxxejsbas.hpp:408] handleException<ESyException>() Converting exception into JS Exception ESyException. TRACE 2010-04-23 19:46:55.307 Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException WARNING[E] 2010-04-23 19:46:55.307 CJSlibModule::writeError_impl() MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.TRACE 2010-04-23 19:46:55.308 [iaxxejsbas.hpp:483] EJS_Base::dispatchFunctionCall() JS Callback has thrown unknown exception. Rethrowing. TRACE 2010-04-23 19:46:55.397 [syuxctask.cpp:1382] CSyTaskImpl::start(bool) A child process has been started. Pid = 782582 TRACE 2010-04-23 19:46:55.590 [syuxctask.cpp:1382] CSyTaskImpl::start(bool)
A child process has been started. Pid = 782584 ERROR 2010-04-23 9:46:55.803 [sixxcstepexecute.cpp:951] FCO-00011 The step setUserEnvironment with step key|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR . TRACE 2010-04-23 19:46:55.833 [iaxxgenimp.cpp:752] CGuiEngineImp::showMessageBox <html> <head> </head> <body> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > IBM DB2 for Linux, UNIX, and Windows > Central System > Central System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /hm/cdmedia/Install/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS. </body></html> TRACE 2010-04-23 19:46:55.833 [iaxxgenimp.cpp:1255] CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
=============================================================================================================
Appreciate your suggestion.
regards,
Guna

FCO-00011 The step runRADDBDIF with step key

hi all
I got the error message when installing process in RUN ABAP report
ERROR 2009-02-14 21:11:25.859
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Regards,
Kevin

Hi Sunny
thanks you reply
but how can I uninstall the instance?
and that means I should entry any password in DDIC?
attached with the error message as followings:
ERROR 2009-02-16 10:17:43.093
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
INFO 2009-02-16 10:17:43.093
RFC connection closed.
ERROR 2009-02-16 10:17:43.109
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
ERROR 2009-02-16 10:17:43.140
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
Regard
Kevin

Steps for Running T-code MIRO in the background

HI,
Plz let me know the steps for running T-code MIRO in the background Programatically.
Regards

Hi
check following link it will help to you
[http://help.sap.com/saphelp_46c/helpdata/en/a8/b992bd452b11d189430000e829fbbd/content.htm]
[invoice verification in background;
Regards
Kailas Ugale

MM Step by Step Flow with T-Codes

Similar Messages

Maybe you are looking for