MNU_* Macro for calling a pakagelink using an excel button

Hi all,
is it possible to call a pakagelink with using an excel button? We use this "MNU_eDATA_SELECTPACKAGE" to call several pakages via excel buttons, but I didnt find any macro to call a hole pakagelink.
Thanks in advance
Christian Weber

Hi,
Running the entire package link through MNU function is not feasible. Kindly take a look at the below link from help.sap for the list of the supported MNU commands:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/f7/715647fa774763827084cd28ef3aff/content.htm
Hope this helps.

Similar Messages

Personas: how to call Transaction code using a Script Button?

Hi,
I want to use a script button to run to certain UI based on the given transaction code. I am thinking there might be some ways to do so:
Option 1:
Somehow one can let the script button call the T-code in script, say, IW21, but how to write such script?
Option 2:
In the script of the script button, use "Push" or "Click" to cause an action on the launch button which contains the T-code, say /nIW21.
But on my PC, this does not work. Why?
pls help asap!
Thx a lot!
Br,
Dong

Knowledge sharing:
Hi,
I have found exact answer to this question: in the script of a script button, one can first set the T-code to the /okdc component, then call "press Enter" action. By this way, any script button can be used to triggle an action for a T-code. One can set teh /okdc as "hidden". Hope this will help other newers.
Br,
Dong

Submit Statement for calling smartform and using its data in another report

Hello Everybody
There is one report which display smartform as an output. My requirement is to call that report and return back without showing its output and use its data for futher use in the report. i Hope i m clear with my query. Plzz reply its urgent.
Currectly i m using this statement :
SUBMIT ZPOPRINT WITH PO_NUM EQ IT_EKKO1-EBELN exporting list to memory and return.
while executing the program, after this statement i m getting an output. but i need to store it in memory, not to display the output.
Waiting for ur reply..
Thanks and Regards
Virendra

Hi.
I have not done this kind of requirement. What i said was just an option which came to my mind. Also not sure whether it will work for you. While submitting ,instead of exporting list to memory do submit to SAP-SPOOL. Then later read the spool content to internal table.
I am referring you two links for this.
[Submit to SAP-SPOOL|http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_LIST_OPTIONS.htm]
[Spool to Internal table|spool file data to internal table].
Also search for related topic in SCN.
Regards
Kesav

URGENT help for calling a window from a flash button in a frame not working

Hello, i'm really desperated, because i can't call a window
in a frame from flash with the getURL, i tried other but do
nothing! and something of external something doesn't work too, so
please can enya tellme what can i do???? i'm using flash 8
professional, explorer 6, (and let me tell you that i didn't have
issues before)!!

chen1 wrote:
> Hello, i'm really desperated, because i can't call a
window in a frame from
> flash with the getURL, i tried other but do nothing! and
something of external
> something doesn't work too, so please can enya tellme
what can i do???? i'm
> using flash 8 professional, explorer 6, (and let me tell
you that i didn't have
> issues before)!!
Please search the forum, in past weeks I personally replied
to the very same topic
few times.
Search for "Flash Player 9 - broken getURL doesn't open
specified frame"
and "Problems with flash navigation in Internet Explorer 7"
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Creating Macros for Smart Art Organization Chart in Excel 2011 for Mac

Hey everyone, I have been trying to figure out how to create a chart of employee's names, titles and who they report to that will dynamically update a smart-art organization chart.
I'm using Excel 2011 for mac.
Any help would be grand
Thanks!

Hello,
I'd recommend asking Office for Mac related questions on the
http://www.microsoft.com/mac/support site or
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads instead.

Macro to call custom dimension

Hi ,
What macro command i can use for showing the dimension members.
like., MNU_ESUBMIT_MEMBERSELECTOR_E gives the list of all members of entity dimension, I want to use this macro for calling a custom dimension P_Activity.
Is there any code that can make this functionality possible.
Thanks in advance,
Sridhar sundaram

Hi Sridhar Sundaram,
To elaborate more, for example if your userdefined dimension has a type of U1 it corressponds to Ua, U2 to Ub, etc. then replace x with the appropriate letter. Ex. MNU_ETOOLS_MEMBERSELECTOR_Ua
Regards,
Marvin Santos

Calling a procedure using JDBC-OCI

When I use setPlsqlIndexTable for calling a procedure using JDBC-OCI
ps.setPlsqlIndexTable(1,str,10,str.length,OracleTypes.VARCHAR,8);
always throw a Exception :
java.sql.SQLException: Non supported character set: oracle-character-set-832
at oracle.gss.util.NLSError.throwSQLException(NLSError.java:46)
at oracle.sql.CharacterSetUnknown.failCharsetUnknown(CharacterSetFactoryThin.java:171)
at oracle.sql.CharacterSetUnknown.convert(CharacterSetFactoryThin.java:135)
at oracle.sql.CHAR.<init>(CHAR.java:133)
at oracle.sql.CHAR.<init>(CHAR.java:157)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatum(OracleTypeCHAR.java:145)
at oracle.jdbc.oracore.OracleType.toDatumArray(OracleType.java:145)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatumArray(OracleTypeCHAR.java:173)
at oracle.jdbc.driver.OraclePreparedStatement.setPlsqlIndexTable(OraclePreparedStatement.java:2622)
When can tell me how to solve it? Thanks

I hava resolve this problem, we must add the
class nls_charset12.zip to classpath.

AAA Radius Authentication for Calling Card Platform

Hi,
I am using AS5350 and I am using it for calling card application using Clear Box as my RADIUS Server for AAA. My question now, how would I know if cisco is sending the dtmf for "enter card number.au" on the RADIUS server ? Does the card number included on the VSA ? below are my configurations and the debug info. The problem here is that the card number that I entered doesn't able to match against the configuration on my Clear Box/SQL Database. I want to know what should I expect from CiscoAS5350 to send a vsa for enter_card_number ?
aaa new-model
aaa group server radius ClearBox
server 192.168.1.1 auth-port 1812 acct-port 1813
aaa authentication login default local
aaa authentication login h323 group ClearBox
aaa authorization exec h323 group ClearBox
aaa accounting exec default start-stop group ClearBox
aaa accounting network default start-stop group ClearBox
aaa accounting connection h323 start-stop group ClearBox
aaa session-id unique
radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
radius-server key 7 0355481F031F761D
radius-server vsa send accounting
radius-server vsa send authentication
call application voice prepaid tftp://192.168.1.2/debitcard-multi-lang-Cisco.1.1.0.2.tcl
call application voice prepaid pin-len 10
call application voice prepaid warning-time 300
call application voice prepaid redirect-number 8662195822
call application voice prepaid language 1 en
call application voice prepaid language 2 sp
call application voice prepaid language 3 ch
call application voice prepaid set-location en 0 tftp://192.168.1.2/prompts/
call application voice prepaid set-location sp 0 tftp://192.168.1.2/prompts/
call application voice prepaid set-location ch 0 tftp://192.168.1.2/prompts/
gw-accounting aaa
==================================================
Getting session id for NET(00003600) : db=6418E654
AA/ACCT/NET(00003600): add, count 1
Getting session id for NET(00003601) : db=6410D098
AAA/ACCT/NET(00003601): add, count 1
AAA/ACCT/CONN(00003601): Pick method list 'h323'
AAA/ACCT/SETMLIST(00003601): Handle 94000002, mlist 62D3B124, Name h323
Getting session id for CONN(00003601) : db=6410D098
AAA/ACCT/CONN(00003601): Queueing record is START
AAA/ACCT(00003601): Accouting method=ClearBox (RADIUS)
AAA/ACCT/EVENT/(00003601): ATTR ADD
AAA/ACCT/CONN(00003601): START protocol reply PASS
AAA/ACCT/EVENT/(00003601): VOICE DOWN
AAA/ACCT/HC(00003601): Update VOICE/000020D3
AAA/ACCT/HC(00003601): VOICE/000020D3 [sess] (rx/tx) base 0/0 pre 0/0 call 0/0
AAA/ACCT/HC(00003601): VOICE/000020D3 [sess] (rx/tx) adjusted, pre 0/0 call 0/0
AAA/ACCT/CONN(00003601): Queueing record is STOP osr 1
AAA/ACCT(00003601): del node, session 174133
AAA/ACCT/CONN(00003601): free_rec, count 1
AAA/ACCT/CONN(00003601): Setting session id 174144 : db=6410D098
AAA/ACCT/HC(00003601): Update VOICE/000020D3
AAA/ACCT/HC(00003601): Deregister VOICE/000020D3
AAA/ACCT/EVENT/(00003601): CALL STOP
AAA/ACCT/CALL STOP(00003601): Sending stop requests
AAA/ACCT(00003601): Send all stops
AAA/ACCT/NET(00003601): STOP
AAA/ACCT/NET(00003601): Method list not found
AAA/ACCT/CONN(00003601): STOP protocol reply PASS
AAA/ACCT/CONN(00003601) Record not present

VSAs are collected by the RADIUS server during the accounting process when AAA is configured with the Debit Card feature. Data items are collected for each call leg created on the gateway. A call leg is the internal representation of a connection on the gateway. Each call made through the gateway consists of two call legs: incoming and outgoing. The call leg information emitted by the gateways can be correlated by the connection ID, which is the same for all call legs of a connection.
Use the H.323 VSA method of accounting when configuring the AAA application.
There are two modes:
â¢Overloaded Session-ID
Use the gw-accounting h323 syslog command to configure this mode.
â¢VSA
Use the gw-accounting h323 vsa command to configure this mode.

My microphone is not working but only for calls

I had my Iphone working perfectly until I updated to 4.3.1 after that I lost the microphone but only for calls when I use Skype, Video recording and may other features that uses microphone all of them worked. I did restore again to 4.3.1 and make a new fresh installation without recovering my data so now I'm not only without phone features but also need to load all of my data again. This occurs most of the time but about 2 of 10 calls the people can hear me so I think this must be related to baseband update or hadware issue.

Might try setting the option in System Preferences > Sound > Input tab > check "use ambient noise reduction"
Regards,
Captfred

Jabber for Window, phone mode, how to disable "use my computer for calls"

We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, Perry

Hi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
    Instant messaging and presence with other Cisco Jabber clients
    Desk phone control
    Voicemail
    Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

HT1151 I WOULD LIKE TO USE MY PLAYSTATION 3 GAME CONTROLLER ON MY IMAC FOR CALL OF DUTY4CAN IT BE USED

i wouu;d like to use my playstation game controller on my imac for call of duty is it possable

Take a look at:
http://www.mactrast.com/2013/01/how-to-use-a-playstation-3-controller-with-your- mac/
MtD

Bought Iphone! But don't want to use it for calling! How to activate it ???

Hi,
just bought an Iphone but don't want use it for calling is there a way to activate it without having a contract with at&t or so! I mean I am not sure if there is a way to do this if anybody knows if it's possible and knows how to do it, I would be very THANKFULLLLLLLL!!!! I need help prettty fast thanks so much!

Why start a new thread on the same topic as before the answers will all be the same you have to activate the iPhone through iTunes and sign a contract with AT&T to activate the iPhone otherwise you wont be able to take pictures or listen to music or use other features, didn't you do any research on the iPhone before purchasing it??? Sounds like you need to return your iPhone where you bought it and just pay the restocking fee and call it good.
Message was edited by: Geffen

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to use d2kwutil for calling win-api programs in form 6i

I WANT TO USE d2kwutil for calling win-api programs in form 6i.
PLEASE GIVE ME IT'S SOLUTION.

D2kwutil comes with a Demo Form WAPIDEMO - you can run this to see every function demonstrated. You can even run a function using the demo form and copy the syntax required directly into your own form -------------------------
yes in have got that WAPIDEMO from web and run successfully but
i can not do those codes in my owdn form.Because i do not get those apis like
win_app_session in form 6i.
Again i could not understand how that form runs without connecting to database.
Please describe the solution.

MNU_* Macro for calling a pakagelink using an excel button

Similar Messages

Maybe you are looking for